Smith & Wesson Forum

Advertise With Us Search
Go Back   Smith & Wesson Forum > Smith & Wesson Rifles and Shotguns > Smith & Wesson M&P 15-22

Notices

Smith & Wesson M&P 15-22 Dedicated to the Smith & Wesson M&P 15-22


Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2010, 07:02 PM
boltman's Avatar
boltman boltman is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Mar 2010
Location: Western New York
Posts: 113
Likes: 0
Liked 0 Times in 0 Posts
Default factory sights

How well are your guns sighting in with open sights? I am finally getting some free time next week (Turkey season) and after I am done chasing the gobblers I want to sight my 15-22 in. I want to try open sights. I have some JP springs on the way from Brownell's and I am going to see how well they work too.

How tight are the groups and what ammo are you using?

I am going to shoot the Fed 550 value pack and velocitors, That's what I have plenty of on hand.

The only upgrade so far was the Hogue grip



Last edited by boltman; 04-29-2010 at 08:04 PM. Reason: typo's
Reply With Quote
  #2  
Old 04-29-2010, 07:22 PM
ceg54 ceg54 is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Apr 2010
Location: monroe nc
Posts: 45
Likes: 0
Liked 0 Times in 0 Posts
Default Iron shooter

I like iron sights also ,mine shoots well with the fed bulk pacs
I shoot at 3 inch steel plates at 70 yds
and if I do my part they go down easy... I havent shot it on paper but Im sure it would be good
Reply With Quote
  #3  
Old 04-29-2010, 07:51 PM
BeginingOfTheEnd BeginingOfTheEnd is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Feb 2010
Location: Montana(No Vacancy)
Posts: 425
Likes: 0
Liked 4 Times in 4 Posts
Default

1.5" group @ 50m
Reply With Quote
  #4  
Old 04-29-2010, 08:24 PM
boltman's Avatar
boltman boltman is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Mar 2010
Location: Western New York
Posts: 113
Likes: 0
Liked 0 Times in 0 Posts
Default

Great , I look forward to seeing what type of results I will get.
Reply With Quote
  #5  
Old 04-29-2010, 09:32 PM
spoolinitup33 spoolinitup33 is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Mar 2010
Posts: 53
Likes: 0
Liked 1 Time in 1 Post
Default

I don't know how tight my groups are, but I've been shooting 6"x6" steel plates from about 175 yards away with iron sights. I put my Millet scope off my AR15 on the 15-22 earlier and had a blast with it. I like to see how far back I can get and still hit stuff lol.
Reply With Quote
  #6  
Old 04-30-2010, 09:17 AM
dakewlndn's Avatar
dakewlndn dakewlndn is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Mar 2010
Location: NoDak
Posts: 99
Likes: 0
Liked 0 Times in 0 Posts
Default

I have the talo version with Magpul MBUS
Iron Sights are great
Got about 20 to 22 hits (on Avg) on a steel plate the size of a sheet of paper at about 150 yards out

I also have the Hogue Grip and its great
Ad a Magpul AFG and the gun will be at home in your hands
Very nice grip to it. I highly recommend it.
Reply With Quote
  #7  
Old 04-30-2010, 10:52 AM
~tc~ ~tc~ is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Jan 2010
Posts: 290
Likes: 0
Liked 1 Time in 1 Post
Default

There are a number of threads with pictures showing the accuracy.

My sights were low and left by quite a bit.
Reply With Quote
  #8  
Old 05-01-2010, 07:49 AM
chuck s's Avatar
chuck s chuck s is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Nov 2009
Location: Cleveland, Ohio
Posts: 1,406
Likes: 0
Liked 58 Times in 46 Posts
Default

Low at what range?

-- Chuck
Reply With Quote
  #9  
Old 05-02-2010, 01:44 AM
~tc~ ~tc~ is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Jan 2010
Posts: 290
Likes: 0
Liked 1 Time in 1 Post
Default

I was shooting at 25 yds, ballistically, that would imply they were low at 75 yds also
Reply With Quote
  #10  
Old 05-02-2010, 10:47 AM
chuck s's Avatar
chuck s chuck s is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Nov 2009
Location: Cleveland, Ohio
Posts: 1,406
Likes: 0
Liked 58 Times in 46 Posts
Default

Point of aim at 25 is darn near point of aim at 50 so 25 is a good "get on the paper" range. 50 is better. 75, a range rarely surveyed, appears to be the best "battlesight zero" range for this rifle and the M16 sight system. It's within an inch of point of aim most of the trajectory.

Someone posted a very nice trajectory chart recently.

Zero the irons, then move your co-witnessed red dot to the tip of the front sight post.

-- Chuck
Reply With Quote
  #11  
Old 05-02-2010, 11:15 AM
~tc~ ~tc~ is offline
Member
factory sights factory sights factory sights factory sights factory sights  
Join Date: Jan 2010
Posts: 290
Likes: 0
Liked 1 Time in 1 Post
Default

The nice trajectory chart you refer to shows 25/75 as the points of aim:

Load Data
~~~~~~~~~

Name: .223 Cal, Federal HP, 36 grn
Ballistic Coeff: 0.125
Bullet Weight: 36
Velocity: 1179
Target Distance: 75
Scope Height: 2.600
Temperature: 70
Altitude: 1115

Ballistic Data
~~~~~~~~~~~~~~~
Range Elevation Velocity Energy ETA Drop Max Y 10mph Wind Deflect
0 yds -2.60 in 1179 fps 111 fpe 0.000 sec 0.00 in -2.60 in 0.00 in
25 yds 0.08 in 1112 fps 99 fpe 0.066 sec 0.81 in -0.83 in 0.34 in
50 yds 1.01 in 1057 fps 89 fpe 0.135 sec 3.38 in -0.16 in 1.33 in
75 yds -0.00 in 1013 fps 82 fpe 0.207 sec 7.89 in 1.05 in 2.90 in
100 yds -3.10 in 975 fps 76 fpe 0.283 sec 14.49 in 2.84 in 4.96 in
125 yds -8.51 in 943 fps 71 fpe 0.361 sec 23.39 in 5.30 in 7.57 in
150 yds -16.31 in 913 fps 67 fpe 0.442 sec 34.69 in 8.45 in 10.61 in
175 yds -26.64 in 887 fps 63 fpe 0.525 sec 48.51 in 12.36 in 14.06 in
200 yds -39.70 in 862 fps 59 fpe 0.611 sec 65.07 in 17.10 in 17.96 in
Reply With Quote
Reply

Tags
223, 442, hogue, m16, millet, model 16, scope


Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
M&P 40 FS factory sights Sigsavvy Smith & Wesson M&P Pistols 8 11-06-2016 01:20 PM
SPF: Millett Sights for 3rd Gen Smith & Wesson Factory Fixed Sights Slide RangerDoc275 Accessories/Misc - For Sale or Trade 3 03-03-2014 08:01 PM
Factory sights twocrows Smith & Wesson M&P 15-22 1 01-02-2014 10:26 AM
Does anybody have factory sights? brewster Smith & Wesson M&P 15-22 6 01-26-2012 11:10 AM
WTB S&W M&P 9mm factory sights malachi_s WANTED to Buy 2 08-08-2011 09:13 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 01:51 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)