The .44 seems to provide a wide range of available bullet weights.
For a .44 magnum and target shooting (no hunting) and ranges of 25-50 yards is there a preferred bullet weight?

Does that change with ranges out to 100 yards?

I prefer 250 grains (lead), the Lyman # 429421. This is a great target bullet and a good hunting bullet as well. Very popular after 70 plus years.

I like the 250 gr also.

Not that I know that much about 44mag but always thought it was the 240 gr.? With the 250 are there advantages as to accuracy, loading or just personal preference??

If I want to magnum power loads I shoot the 240 or 250 grain bullets. For a milder plinking load I shoot a 200 gr. RNFP bullet over either 7.5 gr. Unique or 9.0 gr. for a zippier load that is still pleasant to shoot.

My most common plincking load is a Berry 200 over 11.1 Unique. Enough umphh to remind me it's a magnum and easy on the wrist. It's over 1200 fps, but I';ve never had an issue with Berry plated bullets with up to 1300 fps.
Well never had a problem with them at any velocity, but it's usually not over 1300. One exception, i use a Berry 100gr in 357sig (in a Glock 31 with LWD bbl) that's around 1500. Never seen signs of plating seperation or leading.

dave

__________________
djml66

My favorite is a 250 grain Keith type bullet. The Lyman #429421 mentioned is excellent and actually designed by Elmer Keith. A few commercial casters are making this bullet now if you don't cast your own.
The target load I use is this bullet and 7.5 grains of Unique. Very accurate and pleasant to shoot.

For punching holes in paper,any weight will do however I suspect that the overwhelming majority use bullets in the 240-250 grain range.That is certainly true with me.

240 up to 265 grain... too much more and kinetic energy drops, too much less and ballistic coefficient goes down. Not to mention some of my guns don't have enough sight elevation to use 300gr and/or 200gr.

I load the 429421 250g for my 900fps loads and the 429244 265g for my magnum loads.

I'd hunt with either, but prefer the 265g for that purpose and I shoot 100 yards when I can with both.

I like the 300 gr. XTP for hunting and the 240 SWC for self-defense and target shooting. I've heard the 300 gr. has less energy, but that is not what I've seen from my applications. If you want to hunt big critters, the 300 gr. is tops IMO. Maybe out past 100 yds the 240 0r 250 is best, but that's farther than what I've encountered. If your shots are that long, I would use a rifle anyway. I guess it depends on terrain and what your after.

If I am loading for my handguns, 250gr + cast lead bullets. Hensley & Gibbs #503, a true Keith bullet.

If I am loading for my Marlin lever guns, 240gr Jacketed whatever, makes no difference.

i like shoot in 629 the lyman 429215 and also i buy the mold 3 months ago the rcbs 44-240 sil ,with no gas check i have a rcbs 250 kt
all shoot well

I prefer my homecast RCBS "250" which actually comes out closer to 260 grains. I shoot these from contact distance out to 400 yards.

at about 900 fps works well for taget shooting. Beyond 50 yards, I usually use a rifle but would prefer the 240 for such things in a pistol.

__________________
Big bang, much smash'em.

In my 329PD I prefer 200 grain JHP
In my 629 Classic I prefer 300 grain JSP
In my carbine I prefer 240 grain JHP

__________________
Hook686

at about 900 fps works well for taget shooting. Beyond 50 yards, I usually use a rifle but would prefer the 240 for such things in a pistol.

__________________
Big bang, much smash'em.

From his book "Big Bore Sixguns," I find that John Taffin's standard load is 250 grain hard-cast over 10 grains of Unique for 1150 fps. This is close to the original heavy .44 Special load. For target, this is perhaps hotter than you need, and you could easily get by (for informal target) on published loads which give about 800 fps on each loading. This is my favorite place:
Hodgdon - The Gun Powder People
I don't know what your barrel length is: Presuming a 4" barrel length, the velocity will increase by about 200 fps if your barrel length is 6" and 300 fps if 8 3/8".
Using 240 or 250 grain will not make more than about a 4" difference in trajectory out to 100 yds if you zero at 25-35 yards. You will find it difficult to hold iron sights any better than that unless your eyes are awfully sharp.
I highly recommend a decent reloading manual. Stay safe; have fun.
Sonny

I am using 180 gr. Hornady XTPs over 15 grains of AA#5 for inside shooting and 240 grain factory XTPs for hunting.

Guess I'm the "weird guy" here, but I have been casting bullets for the 44 mag for over 20 years. My two molds are 310 and 360. They shoot fine and have good accuracy. Does anyone else shoot the big bullets?

Rod

Since most of my shooting isn't for hunting I use a Sierra or Remington 210 JHP.
I've used the Sierra bullet on deer and it worked quite well.
My other favorite bullets are the Hornady 240XTP and a hard 240 cast.

__________________
Lynnie, Professional Pest

I shoot a lot of 250gr RCBS Keith type bullets.
My two loads with that bullet are , 8.5 gr of Unique for "plinking" and 20.0 gr of 2400 for serious work.
I shoot a 280 gr WFN GC over 21.5 gr of WW 296 when I'm packing a .44 in Alaska.

My three favorite 44 Magnum bullets are the H&G 503 (the one with the wide driving band - I have seen two designs from H&G), the new Lyman 429244, and the H&G 326. These weigh 250, 265, and 275 grains, respectively.

Depending on the powder and the metal used, any of them can be run up to maximum 44 Magnum levels with little leading and very good accuracy.

I shoot more 503s at 900-1000 fps than anything else.

I use 240 gr XTP or 250 gr Keith SWC for most of my shooting and I have some 320 gr 'Bear' loads, but haven't pulled the trigger on them yet. Not many Bears where I live, but I take them to CO with me for the 'just in case' thing. I use 240 gr SJSP out of my Marlin.

i like 240, cast or jhp

__________________
WILL WORK FOR AMMO!

I like the 245-250grLSWC for plinking & a 270grLHPGC for hunting. I've pretty much banished jacketed bullets from my 44mags.

__________________
NRA Cert. Inst. IDPA CSO

Let's see...

Hornady 180gr HP/XTP at 1200 fps for PD
Missouri Bullet 200gr LRNFP for plinking
Action Bullet 240gr LSWC and 290gr LSWC for hunting practice
Leadhead 250gr LSWC Keith and Cast Performance Bullets 255gr WFNPB for hunting
Hornady 240gr HP/XTP, Speer 240 GDSP, or Hornady 300gr HP/XTP for hunting
Missouri Bullet 300gr Silhouette bullets for target/hunting

Come to think of it, I also purchased some 165gr LRNFP bullets for the short barrel .44 Specials that could also be used in the .44 Magnum. I might have to try that someday...

These are interesting and economical...

These are ~200 grain wc's from a ast Boolit group buy mold. Great at 50'.

In lead I like 240-250, jacketed I like the speer 210 GD.

I haven't loaded any .44 Magnum in years, and mostly loaded .44 Special, but when I did, I mostly loaded bullets in the 240gr. range.

Anybody selling something similar already cast?

This is all I can find on the net. I plan on trying them, might make a good defensive load.
.44 Caliber Bullets Available From Penn Bullets

I primarily a 240-250 Keith fan with both the .44 Special AND the .44 Magnum:



This is the H&G #503 and as near a Keith bullet as you will get. It shoots extremely well and I have taken several deer with it or the Lyman 429421

I have been known, on occasion, to use the Group Buy 200 gr full W/C with success, also. It shows considerably less recoil for target work.

Dale53

I have loaded from 180 to 320 gr. bullets for the .44 mag and my absolute favorite slug is the RCBS 250K ...... hands down.

Three 44s