Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 12-13-2009, 01:57 PM
jeepranch's Avatar
jeepranch jeepranch is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Dec 2009
Posts: 17
Likes: 0
Liked 2 Times in 1 Post
Default Im stumped, 41 S&W Caliber?

I inherited a set of lyman ideal dies in the box. They are marked 41 S&W, after searching the teller of all truths, Ive come up with nothing! Can anyone tell me what I have? Are these really 41 colt dies? thanks

Bill
Attached Images
File Type: jpg 41 sw.JPG (220.2 KB, 164 views)

Last edited by jeepranch; 12-13-2009 at 05:04 PM.
Reply With Quote
  #2  
Old 12-13-2009, 02:15 PM
flagman1776's Avatar
flagman1776 flagman1776 is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Oct 2009
Location: Rhode Island
Posts: 2,000
Likes: 2,515
Liked 1,682 Times in 703 Posts
Default

Might it be 41 S&W Magnum?
Russ
Reply With Quote
  #3  
Old 12-13-2009, 03:06 PM
jeepranch's Avatar
jeepranch jeepranch is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Dec 2009
Posts: 17
Likes: 0
Liked 2 Times in 1 Post
Default

Quote:
Originally Posted by flagman1776 View Post
Might it be 41 S&W Magnum?
Russ
Remington developed the 41 mag
Reply With Quote
  #4  
Old 12-13-2009, 04:29 PM
Jellybean Jellybean is offline
Member
 
Join Date: Nov 2006
Posts: 2,698
Likes: 6
Liked 351 Times in 243 Posts
Default

I'd read something years ago about S&W offering a .41S&W but could never find anything about it. It's possible they used it instead of ".41 Colt" to keep the Colt name off their firearms, but then Lyman/Ideal would have to have made dies under both designations too.

Hopefully some of the more knowedgable folks here will be able to help you out more than I can, but I'd like to know if you find anything out at all. I'm a .41 anything junkie.

Good luck and welcome to the forum.
Reply With Quote
  #5  
Old 12-13-2009, 05:01 PM
jeepranch's Avatar
jeepranch jeepranch is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Dec 2009
Posts: 17
Likes: 0
Liked 2 Times in 1 Post
Default

Quote:
Originally Posted by Jellybean View Post
I'd read something years ago about S&W offering a .41S&W but could never find anything about it. It's possible they used it instead of ".41 Colt" to keep the Colt name off their firearms, but then Lyman/Ideal would have to have made dies under both designations too.

Hopefully some of the more knowedgable folks here will be able to help you out more than I can, but I'd like to know if you find anything out at all. I'm a .41 anything junkie.

Good luck and welcome to the forum.
Thanks Jelly, I was thinking along the same lines, but you would think it would be documented somewhere. The box looks old, at least 50s, probably older. Ill see if I can post a pix
Reply With Quote
  #6  
Old 12-13-2009, 05:17 PM
john traveler john traveler is offline
Member
 
Join Date: Nov 2007
Location: west coast
Posts: 1,486
Likes: 0
Liked 55 Times in 34 Posts
Default

I have the same Lyman 310/Truline dies, and the sizer/decapper is marked "41 Magnum FL" meaning .41 Magnum full-length sizer.

The expander plug die is marked "410" meaning .410" diameter.

I can't think of any other appropriate cartridge, can you?
Reply With Quote
  #7  
Old 12-13-2009, 06:51 PM
2152hq 2152hq is offline
Member
Im stumped, 41 S&W Caliber?  
Join Date: Sep 2005
Posts: 7,727
Likes: 1,633
Liked 9,095 Times in 3,365 Posts
Default

They look like 310 dies. They are still made and Lyman provided them in 41 Mag and also 41 Colt.
I'd guess yours are for the 41 S&W Magnum cartridge.
I did see one set that was marked '41 Colt Long' quite a while ago.

41Mag is a .410 bullet,,,,,,41Colt is a .400

Do a search for 'The 310 Shop' They are in Texas I think. They still make alot of 310 dies and tools. Alot of obsolete cal dies and at one time I believe they actually made the dies that Lyman retailed.

It would be neat though if they were some special production dies for a .41 S&W Special cartridge..

Last edited by 2152hq; 12-13-2009 at 06:55 PM.
Reply With Quote
  #8  
Old 12-13-2009, 09:33 PM
Alk8944's Avatar
Alk8944 Alk8944 is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,616
Likes: 1,554
Liked 8,611 Times in 3,452 Posts
Default

There was a .41 S&W cartridge!

This basically never made it out of the experimental stage sometime in the 1890s. Basically it was similar to .41 Long Colt with an inside lubricated bullet aprox. .386 diameter as the later .41 LC with the inside lubricated hollow-base bullet. The case was slightly shorter and had a larger rim than the Colt round. Only two revolvers are known to have been chambered for it, both #3 top-breaks.

Since there were only two guns it is highly unlikely Lyman made dies for this cartridge. They are probably for .41 Magnum.
Reply With Quote
  #9  
Old 12-13-2009, 10:09 PM
Jellybean Jellybean is offline
Member
 
Join Date: Nov 2006
Posts: 2,698
Likes: 6
Liked 351 Times in 243 Posts
Default

Looking at the photo it does look like they'd be for the .41 magnum.

The ad I saw was from a lot longer in the past, and I believe it was for New Model No. 3s. Thanks for the info Alk8944, I found an old Ideal mould for an IL .41 Colt bullet in a gun store, then had to find a gun to go with it.
Reply With Quote
  #10  
Old 12-13-2009, 11:52 PM
Smithhound's Avatar
Smithhound Smithhound is offline
US Veteran
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Sep 2005
Location: SE Tennessee
Posts: 1,193
Likes: 0
Liked 308 Times in 108 Posts
Default

Measure the expander ball and see what diameter it is .398 or .408. At the least try a .41 magnum case in it (lubed, those are pre carbide) go slow and see what you come out with. Nothing ventured, nothing gained.
Most likely it is for the Magnum, but being non-carbide would make for a better display item than a useful set. You could also contact Lyman and ask.
RD
__________________
Got a Phd from Hard Knocks U
Reply With Quote
  #11  
Old 12-14-2009, 07:53 AM
Hairy Hairy is offline
Member
 
Join Date: Oct 2006
Location: Minnesota
Posts: 9
Likes: 4
Liked 2 Times in 2 Posts
Default

If you reference the all-knowing, all-seeing Herter's PROFESSIONAL LOADING OF RIFLE, PISTOL,AND SHOTGUN CARTRIDGES from years ago, you will find the .41 S&W Magnum on page 417. Rim dia.=.492" Length of case= 1.290" Rim thickness=.060" loaded length overall=1.590" These are the same dimensions listed in the LYMAN CAST BULLET HANDBOOK for the .41 Remington Magnum.

I would suspect the .41 S&W Magnum and the .41 Remington Magnum to be one and the same. But, then, what would I know.
Reply With Quote
  #12  
Old 12-14-2009, 08:44 AM
jeepranch's Avatar
jeepranch jeepranch is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Dec 2009
Posts: 17
Likes: 0
Liked 2 Times in 1 Post
Default

Quote:
Originally Posted by Hairy View Post
If you reference the all-knowing, all-seeing Herter's PROFESSIONAL LOADING OF RIFLE, PISTOL,AND SHOTGUN CARTRIDGES from years ago, you will find the .41 S&W Magnum on page 417. Rim dia.=.492" Length of case= 1.290" Rim thickness=.060" loaded length overall=1.590" These are the same dimensions listed in the LYMAN CAST BULLET HANDBOOK for the .41 Remington Magnum.

I would suspect the .41 S&W Magnum and the .41 Remington Magnum to be one and the same. But, then, what would I know.
good info, thanks, I believe you are right, they are 41 mag dies, how strange
Reply With Quote
  #13  
Old 12-14-2009, 10:52 AM
flagman1776's Avatar
flagman1776 flagman1776 is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Oct 2009
Location: Rhode Island
Posts: 2,000
Likes: 2,515
Liked 1,682 Times in 703 Posts
Default

I believe that the 41 Mag was a joint project between S&W and Remington. It was in the gun magazines at the time.
Russ
Reply With Quote
  #14  
Old 12-14-2009, 11:48 AM
george minze george minze is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Sep 2008
Location: Jefferson City Mo.
Posts: 2,422
Likes: 1,388
Liked 1,473 Times in 755 Posts
Default

Back in the 60's S#W came out with a fixed sight heavy barrel revolver especially for police use. It came with two loadings. 1. high power for Highway Patrol. 2. lower power for city police. Both ere called S&W .41 Mags. if my memory doesn't fail one revolver was the model 57, the other was model 58. One had fixed sights the other looked just like a 44 mag with adjustable sights. I don't think it really took off. I do know Cincinnati police tested them back in the 60's in the lower loading, fixed sight model. Officers thought them to be too heavy...testing was as far as they got.
Reply With Quote
  #15  
Old 12-14-2009, 01:32 PM
Jellybean Jellybean is offline
Member
 
Join Date: Nov 2006
Posts: 2,698
Likes: 6
Liked 351 Times in 243 Posts
Default

Quote:
I would suspect the .41 S&W Magnum and the .41 Remington Magnum to be one and the same.
If the box had mentioned anything at all about "magnum" it would have been a no brainer. And who makes a magnum round without a non-magnum ancestor anyway?

Lyman may have done it because the S&W .41 magnums barrels were only marked "Smith and Wesson" on one side and ".41 magnum" on the other. Marking their boxes with "Remington" would have only added to confusion since you won't find any Remingtons in .41 Magnum. Although a 788 carbine in .41 Remington Magnum would be a real gem.

And if no other manufacturers were making a .41 magnum at the time, marking the dies .41 S&W would have been understandable. The only other choice would have been the .41 Colt.
Reply With Quote
  #16  
Old 01-09-2010, 06:32 PM
NWShooter NWShooter is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Jan 2010
Location: Spokane, WA
Posts: 19
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by Alk8944 View Post
There was a .41 S&W cartridge!

This basically never made it out of the experimental stage sometime in the 1890s. Basically it was similar to .41 Long Colt with an inside lubricated bullet aprox. .386 diameter as the later .41 LC with the inside lubricated hollow-base bullet. The case was slightly shorter and had a larger rim than the Colt round. Only two revolvers are known to have been chambered for it, both #3 top-breaks.

Since there were only two guns it is highly unlikely Lyman made dies for this cartridge. They are probably for .41 Magnum.
FYI and I realize that I am quite late on this thread, but to --- Alk8944 is correct-
U.S. Cartridges and Their Handguns by Charles R Suydam (1977) shows a .41 S&W cartridge on page 192. I am not suggesting that the dies in the original post are for this cartridge but thought I would pass on the details.

Cartridge dimensions:
Rim dia. - .455
Head dia - .406
Case mouth dia. - .406
Bullet dia. - .373
Case length - 1.041
Overall length - 1.470

Quoting the text:
"The .41 S&W is one of a series of experimental cartridges made for S&W by UMC sometime in the period 1890-1910. It is unlike any other .41 calibre cartridge, and no information as to its load, bullet weight, or powder type has been found".

The text goes on for two pages but my typing is so slow I am not going to try.

I am not a big forum guy and do not know how these things work but, is it OK to scan and upload the pages from a book like this or is that a copyright infringement?

Chris
Reply With Quote
  #17  
Old 01-09-2010, 06:52 PM
mkk41 mkk41 is offline
Banned
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Aug 2004
Location: South East , PA . USA
Posts: 5,027
Likes: 485
Liked 1,610 Times in 884 Posts
Default

Oddly , there is no .41 S&W cartridge listed in the latest , 11th edition of Barnes Cartridges of the World.

If it was a factory experimental round , I find it odd that there would be reloading dies for it.
Reply With Quote
  #18  
Old 01-09-2010, 07:02 PM
NWShooter NWShooter is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Jan 2010
Location: Spokane, WA
Posts: 19
Likes: 0
Liked 1 Time in 1 Post
Default

I agree and that's why I said, "I am not suggesting that the dies in the original post are for this cartridge...".
Like many others on any forum I just had this fit of "knowledge conceit" and thought I would pass the info on.
Reply With Quote
  #19  
Old 01-09-2010, 11:21 PM
oldRoger oldRoger is offline
US Veteran
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Nov 2007
Location: Citrus County, Florida
Posts: 2,073
Likes: 21
Liked 218 Times in 110 Posts
Default

Those are old boxes, I havn't seen any like that for a very long time. I have a stick of Lyman Cast Bullet Lube the box is similar to those and it is from the middle 50s.
__________________
Ipsis Rebus Dictantitbus
Reply With Quote
  #20  
Old 01-10-2010, 07:21 PM
ddixie884's Avatar
ddixie884 ddixie884 is offline
Member
Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber? Im stumped, 41 S&W Caliber?  
Join Date: Dec 2004
Location: Avery,Tx
Posts: 2,563
Likes: 3,812
Liked 1,860 Times in 938 Posts
Default

I really like the way the folks on this forum answer these inquiries. Even a subject this obscure gets knowledge I didn't have. THANX
__________________
dd884
JMHO-YMMV
Reply With Quote
  #21  
Old 01-11-2010, 11:03 AM
Jellybean Jellybean is offline
Member
 
Join Date: Nov 2006
Posts: 2,698
Likes: 6
Liked 351 Times in 243 Posts
Default

NWShooter, thanks for those dimensions, I wrote them down for future reference.

I also looked online for a copy of that book you mentioned, is it made out of gold or something?
Reply With Quote
Reply

Tags
carbine, cartridge, colt, model 57, remington, s&w, smith and wesson, umc

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Im Stumped, Please help!! Jonyzdude Smith & Wesson M&P Pistols 5 08-30-2016 01:12 PM
Stumped gjohnson S&W Revolvers: 1980 to the Present 5 03-18-2014 08:02 AM
Please help. Stumped Hardwoodbw S&W Hand Ejectors: 1896 to 1961 6 01-31-2013 10:37 PM
Stumped Nimbus S&W Hand Ejectors: 1896 to 1961 11 03-23-2011 07:02 PM
I'm stumped cyriaque1946 S&W Revolvers: 1961 to 1980 4 08-25-2010 10:59 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:25 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)