|
|
09-26-2010, 09:57 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
What powder is closest in all aspects to HP38/Win231?
I use HP-38 for pretty much all of my handgun loads in all calibers. Yes, there are some that a a little better for some, especially in the higher magnum loads, but HP 38 gets it done for 99% of my needs.
Say there was no more HP-38/W 231 what powder from any maker would be as versatile as HP-38?
380 auto, 9mm, 40SW, 45ACP, 38 Spl, 357 Mag, 44 Spl, 44 Mag
Not just going by the burn rate chart. What powder would be a direct substitute or replacement, if there is one. Charge density, flow, consistency etc.???
Just off the top of my head I am thinking Unique, but what do you all say??
__________________
Still Running Against the Wind
|
09-26-2010, 10:03 PM
|
Member
|
|
|
Join Date: Dec 2009
Location: North Carolina
Posts: 3,054
Likes: 107
Liked 456 Times in 205 Posts
|
|
Yeah probably Unique. I often lump W231 and Unique together in my mind, though I tend to use Unique in revolver loads and W231 for semiautos. Power Pistol might be a contender also, but honestly let's just hope they never stop making W231. It's a great powder.
|
09-26-2010, 10:13 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2007
Location: Colorado
Posts: 1,521
Likes: 33
Liked 249 Times in 118 Posts
|
|
Sir, Unique isn't a direct replacement (charge weights will be different), but it's certainly versatile. If I could have only one pistol powder, Unique would be it. I've had good results with it in .44 mag and special and .45 Colt and ACP. I haven't used it any of the small bores, but I understand it's good in .38/.357 as well.
You might also think about Bullseye, particularly if you're mainly sticking with mild loads. Like Unique, it's not a direct replacement for 231/HP-38, but is quite versatile.
Hope this helps, and Semper Fi.
Ron H.
__________________
Wishin' don't make it so.
|
09-26-2010, 10:15 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2001
Location: illinois
Posts: 6,299
Likes: 1,850
Liked 6,696 Times in 2,119 Posts
|
|
Unique is a great powder and I use a lot of it. I chose 231 to replace Bullseye, but I suppose you could go the other way if you could not find 231/HP38. You might also want to look at Red Dot.
|
09-26-2010, 10:42 PM
|
|
Member
|
|
|
Join Date: Aug 2006
Location: Tennessee
Posts: 1,249
Likes: 83
Liked 80 Times in 43 Posts
|
|
I wont hesitate to recommend Green Dot. Similar charges often yield similar results for me. in fact in the 9mm I use the exact same charge as HP/231.
__________________
too TOO young!!
|
09-26-2010, 10:53 PM
|
|
US Veteran
|
|
|
Join Date: Aug 2004
Location: Rusk Co. Texas
Posts: 1,318
Likes: 0
Liked 43 Times in 31 Posts
|
|
I think metering would be a major issue with most of the flake powder suggestions so far. From most of what I've read, people use W231 or Bullseye. It's just a matter of choice, but I tend to use Bullseye.
|
09-26-2010, 11:25 PM
|
Member
|
|
|
Join Date: May 2009
Location: Wilmington, NC
Posts: 1,018
Likes: 174
Liked 677 Times in 311 Posts
|
|
I recently switched from using W231 for 45 acp and 45 colt to Unique. W231 & HP38 did disappear for the last 2 years, or at least I couldn't find any. It's close to W231 and I like it.
|
09-26-2010, 11:38 PM
|
|
Member
|
|
|
Join Date: Feb 2009
Location: Kansas
Posts: 1,366
Likes: 279
Liked 63 Times in 42 Posts
|
|
How about AA #2, Red Dot, or Bullseye. Or even Winchester Super Target.
|
09-27-2010, 12:44 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
How close do you think AA #5 is? I have never used any of the AA powders.
Bullseye sure does meter well and do not have to use a lot of it.
__________________
Still Running Against the Wind
Last edited by Rule3; 09-27-2010 at 12:47 AM.
|
09-27-2010, 12:46 AM
|
Member
|
|
|
Join Date: Jan 2001
Location: Illinois
Posts: 513
Likes: 46
Liked 60 Times in 31 Posts
|
|
Absolutely, without question, Ramshot ZIP. It's DARN near a load-for-load replacement for W231 in my loads. In fact, I'm going to test a pound of it, and if it is less smokey with cast bullet loads, I may switch to it anyway, but I've got a LOT of 231/HP38 to get rid of first...
WST is a very close contender, but it's not as close of a one-for-one load-by-load replacement for 231 as ZIP is. But, WST is a good powder, clean and round for easy metering.
However, all this talk of W231/HP38 going away is a lot of hooey! It's one of the five most popular pistol powders on the market.
|
09-27-2010, 12:48 AM
|
Member
|
|
|
Join Date: Jan 2001
Location: Illinois
Posts: 513
Likes: 46
Liked 60 Times in 31 Posts
|
|
Quote:
Originally Posted by OCD1
How close do you think AA #5 is? I have never used any of the AA powders.
|
:-) We were posting at the same time!
AA#5 is a tad slower than Unique, so no where close to W231/HP38.
HP38/W231 is roughly in-between Red Dot and Unique in burn-rate, so, depending on application and burn rate of the particular lot # you have, 231/38 is anywhere from a lot to a touch faster than Unique, whereas AA#5 is always slower, usually noticeably so.
|
09-27-2010, 05:38 AM
|
Banned
|
|
|
Join Date: Mar 2006
Location: Hoosier Land!
Posts: 4,379
Likes: 587
Liked 576 Times in 307 Posts
|
|
AA#5 doesn't like to be loaded on the light side of it's data at all. In fact, you can stick a bullet pretty easily by just making the OAL too long with a light load. Don't ask!
That being said, you can work up some wonderful loads with any one of the Accurate Arms powders. If I was going to replace HP-38/W231 though, it would be with AA#2 performance wise.
I have never used any of the Ramshot powders so cannot comment there. Looking at the burn rate chart, SR7625 is a good option. It isn't too popular but it is a good powder. Its flakes are smallish and meter well, similar to how Bullseye does.
Power Pistol is right there too and it works well. Other than being "flashy" it would be a good choice. I have used it in 9mm and 40S&W with really good results. Others use it for 38spl +p loads and really like it.
But, if you are worried about W231/HP-38 going away, I don't think so. One might, because of competing against itself is kind of silly until you factor in the "quirkiness" of us reloaders about component names and such!
|
09-27-2010, 07:50 AM
|
Member
|
|
|
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,161
Likes: 3,620
Liked 5,210 Times in 2,174 Posts
|
|
Quote:
SR7625 is a good option. It isn't too popular but it is a good powder. Its flakes are smallish and meter well
|
That's exactly the powder I thought of when I read the original post question. SR7625 shares the ability of HP38/231 to meter well through a progressive press and get exact power factors for coompetition, a trait that Unique flake powder does not share.
Although the charge weights are less, Titegroup is a cousin of HP38/231 (according to the manufacturer) modified to be less position and temperature sensitive, with competition shooters in mind.
|
09-27-2010, 08:28 AM
|
Banned
|
|
|
Join Date: Mar 2006
Location: Hoosier Land!
Posts: 4,379
Likes: 587
Liked 576 Times in 307 Posts
|
|
Titegroup
Quote:
Originally Posted by OKFC05
That's exactly the powder I thought of when I read the original post question. SR7625 shares the ability of HP38/231 to meter well through a progressive press and get exact power factors for coompetition, a trait that Unique flake powder does not share.
Although the charge weights are less, Titegroup is a cousin of HP38/231 (according to the manufacturer) modified to be less position and temperature sensitive, with competition shooters in mind.
|
I have used SR7625 only minimally. It seems to be a good powder, I use it's cousin, SR4756 much more.
The only problem I have with Titegroup is it's density. So little of it weighs so much that a normal 4.5gr charge could be tripled and barely be noticeable. That is slightly exaggerated but partially true to. It would fit in a 45ACP case, but most would notice it!
|
09-27-2010, 08:39 AM
|
US Veteran
|
|
|
Join Date: Mar 2010
Location: Central Texas
Posts: 2,601
Likes: 8,743
Liked 1,813 Times in 797 Posts
|
|
Hodgen Universal. It is as flexible as unique and burns cleaner. It is a do anything powder, and works well with everything from 25acp to the big magnums. It is good for light/medium loads and slow enough for pretty fair velocities in the big magnums.
|
09-27-2010, 10:26 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
What started me thinking about this (always dangerous) was I was going to order some primers and wanted to get 8lbs of HP 38. Of course everywhere I look, they have one but not the other
So I was thinking of some alternatives and trying not to be so powder "dependent". I do not like nor need a whole bunch of powders which is why I settled on HP 38. For my needs it works.
I did not think it was "going away" just a availability thing. Kinda like Winchester primers, I like them but still try to find them.
__________________
Still Running Against the Wind
Last edited by Rule3; 09-27-2010 at 10:31 AM.
|
09-27-2010, 10:59 AM
|
Member
|
|
|
Join Date: Aug 2004
Location: Western Colorado
Posts: 253
Likes: 0
Liked 19 Times in 12 Posts
|
|
I just ran a comparison between Hodgdon HP38 and Accurate #2 on QuickLOAD using a 124gr FMJ bullet in the 9mm Luger. Max loads were only .1gr apart, and velocities were within 10 fps. Plus both are spherical powders that measure very well. I've used Accurate #2 for years now, and it's performance is outstanding. YMMV.
(Additional Info: I just checked Ramshot Zip with QuickLOAD, and it's performance is computed to be almost exactly the same as Accurate #2.)
Last edited by RidgwayCO; 09-27-2010 at 11:12 AM.
|
09-27-2010, 11:44 AM
|
|
Member
|
|
|
Join Date: Aug 2006
Location: Tennessee
Posts: 1,249
Likes: 83
Liked 80 Times in 43 Posts
|
|
Quote:
Originally Posted by OCD1
What started me thinking about this (always dangerous) was I was going to order some primers and wanted to get 8lbs of HP 38. Of course everywhere I look, they have one but not the other
So I was thinking of some alternatives and trying not to be so powder "dependent". I do not like nor need a whole bunch of powders which is why I settled on HP 38. For my needs it works.
I did not think it was "going away" just a availability thing. Kinda like Winchester primers, I like them but still try to find them.
|
OCD, I wish we were closer and I would sell you an 8 pounder of HP-38.
Another good powder that meters as well as HP is AutoComp. In my loads it requires 3/10 grain more in 9mm and a 1/2 grain more in 45 ACP but the results have been excellent.
__________________
too TOO young!!
|
09-27-2010, 12:25 PM
|
|
Member
|
|
|
Join Date: Feb 2003
Posts: 1,617
Likes: 49
Liked 721 Times in 369 Posts
|
|
Bullseye, in my opinion.
Steve
|
09-27-2010, 12:46 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
Quote:
Originally Posted by NKJ nut
OCD, I wish we were closer and I would sell you an 8 pounder of HP-38.
Another good powder that meters as well as HP is AutoComp. In my loads it requires 3/10 grain more in 9mm and a 1/2 grain more in 45 ACP but the results have been excellent.
|
Appreciate the offer , wish I was a bit further North also. I could get your bullets also and enjoy some better weather than the brutal sub tropics. I do not even enjoy going to the range. Maybe an hour is all I can take.
__________________
Still Running Against the Wind
|
09-27-2010, 12:50 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
Quote:
Originally Posted by RidgwayCO
I just ran a comparison between Hodgdon HP38 and Accurate #2 on QuickLOAD using a 124gr FMJ bullet in the 9mm Luger. Max loads were only .1gr apart, and velocities were within 10 fps. Plus both are spherical powders that measure very well. I've used Accurate #2 for years now, and it's performance is outstanding. YMMV.
(Additional Info: I just checked Ramshot Zip with QuickLOAD, and it's performance is computed to be almost exactly the same as Accurate #2.)
|
Thanks! Have you used it or run it through the puter for other calibers?
Edit:
I just downloaded the Accurate Powders load data 'Manual" and with exception of 357 and 44 mag, #2 will load anything else I shoot. So it looks like a prime candidate.
__________________
Still Running Against the Wind
Last edited by Rule3; 09-27-2010 at 01:14 PM.
|
09-27-2010, 04:09 PM
|
|
Moderator SWCA Member Absent Comrade
|
|
|
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
|
|
Quote:
Originally Posted by MMA10mm
Absolutely, without question, Ramshot ZIP. It's DARN near a load-for-load replacement for W231 in my loads. In fact, I'm going to test a pound of it, and if it is less smokey with cast bullet loads, I may switch to it anyway, but I've got a LOT of 231/HP38 to get rid of first...
WST is a very close contender, but it's not as close of a one-for-one load-by-load replacement for 231 as ZIP is. But, WST is a good powder, clean and round for easy metering.
|
I totally agree W231/HP-38 and Zip are almost, if not exactly the same powders. Just a note, W231, HP-38 and Zip are all ball powders manufactured in the same St. Marks plant. Hmmmmm...
__________________
Freedom is never free!!
SWCA #3437
|
09-27-2010, 04:47 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
Seems Ramshot and Accurate are one and the same.
Same PO Box and address. Perhaps duplicate products like HP38 and W231 etc.
One of these days I need to drive across the State to the St Marks plant.
__________________
Still Running Against the Wind
|
09-27-2010, 08:57 PM
|
US Veteran
|
|
|
Join Date: Mar 2010
Location: Central Texas
Posts: 2,601
Likes: 8,743
Liked 1,813 Times in 797 Posts
|
|
If you are thinking of an 8 pound keg, why not just order some from Powder Valley, Bruno's, Natchez shooter supply etc.? Then, you could have what you want. Usually you can get 8 pounds from one of the suppliers cheap enough that it will make up for the $25.00 haz shipping fee.
|
09-28-2010, 12:03 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
Quote:
Originally Posted by Harrison
If you are thinking of an 8 pound keg, why not just order some from Powder Valley, Bruno's, Natchez shooter supply etc.? Then, you could have what you want. Usually you can get 8 pounds from one of the suppliers cheap enough that it will make up for the $25.00 haz shipping fee.
|
They don't have it in stock.
__________________
Still Running Against the Wind
|
09-28-2010, 12:53 PM
|
Member
|
|
|
Join Date: Aug 2004
Location: Western Colorado
Posts: 253
Likes: 0
Liked 19 Times in 12 Posts
|
|
OCD, if you can get your hands on an Accurate #2 Reloading Manual, it has pressure-tested data for .357 Magnum and .44 Magnum using Accurate #2. I don't know why it's omitted from the online data.
In fact, one of my favorite .44 Magnum loads (when I still had a .44 Magnum...) was a Hornady 180gr HP/XTP at 1200 fps using about 10 gr of Accurate #2. This is the starting load for this bullet in the Accurate Reloading Manual #2, and duplicates the performance of an old CorBon self-defense load in .44 Magnum using the exact same bullet. Accurate, clean, and follow-up shots were easy.
Added: AFAIK, Western Powders produces Ramshot and recently bought Accurate.
Last edited by RidgwayCO; 09-28-2010 at 12:55 PM.
|
09-28-2010, 01:03 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
Quote:
Originally Posted by RidgwayCO
OCD, if you can get your hands on an Accurate #2 Reloading Manual, it has pressure-tested data for .357 Magnum and .44 Magnum using Accurate #2. I don't know why it's omitted from the online data.
In fact, one of my favorite .44 Magnum loads (when I still had a .44 Magnum...) was a Hornady 180gr HP/XTP at 1200 fps using about 10 gr of Accurate #2. This is the starting load for this bullet in the Accurate Reloading Manual #2, and duplicates the performance of an old CorBon self-defense load in .44 Magnum using the exact same bullet. Accurate, clean, and follow-up shots were easy.
Added: AFAIK, Western Powders produces Ramshot and recently bought Accurate.
|
Thanks, I downloaded it. Yes, the companies are one and the same.
__________________
Still Running Against the Wind
|
09-29-2010, 02:57 AM
|
|
Moderator SWCA Member Absent Comrade
|
|
|
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
|
|
Quote:
Originally Posted by OCD1
Seems Ramshot and Accurate are one and the same.
Same PO Box and address. Perhaps duplicate products like HP38 and W231 etc.
One of these days I need to drive across the State to the St Marks plant.
|
Both companies are owned by Western Powders so yes, they are the same company now...
__________________
Freedom is never free!!
SWCA #3437
|
09-29-2010, 09:14 PM
|
Member
|
|
|
Join Date: Jan 2001
Location: Illinois
Posts: 513
Likes: 46
Liked 60 Times in 31 Posts
|
|
Quote:
Originally Posted by OCD1
Seems Ramshot and Accurate are one and the same.
Same PO Box and address. Perhaps duplicate products like HP38 and W231 etc.
One of these days I need to drive across the State to the St Marks plant.
|
Quote:
Originally Posted by ArchAngelCD
Both companies are owned by Western Powders so yes, they are the same company now...
|
There is a long convaluted story here, but the bottom line is that Accurate started in TN as an importer and re-labeller of foreign powders. Originally, they sourced them from Isreal (whose powder plant was set up by Olin way back when; the same Olin which set up the St. Mark's Powder plant -- before it was sold to General Dynamics -- so hence why AA#2 is so similar to W231), but Accurate would shop around to other places to get the bulk powders cheaper. Sometimes they got them direct from St. Marks, and before they sold out to Western Powders, they were getting a bunch of their powders from Czech Republic.
One of my biggest disappointments when Western bought out Accurate and took over their product line is that they ended the big reloading manual, and worse yet, ended the on-line edition of the big manual. Now, all there is on line or from Western is an 8-page flyer. Now, some of the best powder companies (including Accurate) started out with flyers for their load data, but I see what Western did as a backwards step. I understand the liability situation, but Western has a great ballistics lab, and they could have ran the loads in the manual in a year or so and put out a third edition with their own name on it, IMO...
Anyway, to clarify a couple things:
W231/HP38/SMP231 are the same powder made by St. Marks in Florida.
Titegroup's qualities of both density and burn rate make it no where near a one-for-one replacement for 231. It may be a "cousin" in that it's formulation, constituent parts, etc. are very similar, but it behaves differently than 231. I find it much more spikey in pressure, that it's not that accurate (ironic considering it's name), and it's max performance falls short of 231 (in terms of velocity). It's definitely a low-velocity target powder that reaches it's goals of insensitivity to positioning of low-doses of powder, but it's other (poor) qualities don't work for me. If I was a Bullseye powder fan, I might replace Bullseye with it, but I find them to much more similar in applications to each other, than Titegroup to 231.
AA#2 and Ramshot ZIP do not appear to be the same powder, but that is still open to debate, as I'm not 100% informed of the sourcing of both of them, now that Western owns both Ramshot and Accurate. They are very similar, as noted, and they are also very similar to 231. In fact, AA#2 is more of a cousin to 231 than Titegroup, as their application spectrum and performance are nearly identical.
HTH
|
09-30-2010, 12:16 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
Thanks for that background. Interesting stuff. As I mentioned. one of these days I am going to take a day trip and drive over across the State to St Marks and see if I can gather some info or maybe get a tour. I'll call first just to be sure. I like it over on that coast anyway.
__________________
Still Running Against the Wind
|
10-05-2010, 07:53 AM
|
Member
|
|
|
Join Date: Jan 2009
Location: Belgium
Posts: 89
Likes: 0
Liked 7 Times in 6 Posts
|
|
Over here we tend to have powder availability problems now & again.
I mainly load .38 Spl, .44 Spl, .45 Colt, .45 ACP and occasionally light .357 Mag loads.
My favorite powder used to be W-231, as I could load all those calibers with it.
Now, I use VihtaVuori N-320 since it's more readily available & I've found that it is just as versatile in use as W-231 and pretty close to it in application/burn rate.
|
10-05-2010, 09:30 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,087
Likes: 10,799
Liked 15,514 Times in 6,800 Posts
|
|
Quote:
Originally Posted by chriske
Over here we tend to have powder availability problems now & again.
I mainly load .38 Spl, .44 Spl, .45 Colt, .45 ACP and occasionally light .357 Mag loads.
My favorite powder used to be W-231, as I could load all those calibers with it.
Now, I use VihtaVuori N-320 since it's more readily available & I've found that it is just as versatile in use as W-231 and pretty close to it in application/burn rate.
|
Always nice to hear from folks in different Countries. We have availability problems as well. I almost never see VihtaVouri around here and if there is any, it is usually more expensive.
Please send us some of your delicious food
__________________
Still Running Against the Wind
|
|
Tags
|
25acp, 357 magnum, 38spl, 44 magnum, 45acp, bullseye, colt, hornady, natchez, universal, winchester |
Posting Rules
|
|
|
|
|