Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2011, 01:21 PM
Beemer-mark Beemer-mark is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: May 2009
Location: Wilmington, NC
Posts: 1,014
Likes: 172
Liked 671 Times in 309 Posts
Default Power Pro 300-MP Rant

Generally I use Alliant 2400 to load 357 magnum but my dealer can't get it, all he gets is Alliant Power Pro™ 300-MPfor Magnum Pistol. It's the worse **** I've ever used. Next to no load date. Using Alliant's single recipe (no min, no max) it pretty much duplicates 2400. OK I can live with that.
It has the consistency of baby powder. And like baby powder it just "fluffs" all over the place. Tried it in my square D and what a mess. Ends up all over everything and sticks like super glue. Got between the shell plate and press surface and turned into some kind of tough plastic sheet. Had to dissasemble everything and scrubbed it using a brush and brake cleaner.
Tried it in my RCBS single stage press, not much better results. Wants to bridge in the powder dispenser, sticks to the loading pan and blows all over (even when in the brass).

Loaded half a pound, going to burn the other half.
Reply With Quote
The Following User Likes This Post:
  #2  
Old 04-10-2011, 03:30 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,467 Times in 6,788 Posts
Default

Sorry to hear that. Perhaps write them a letter. They may be nice and give you a coupon or something. I looked at some of the load data for the Gold Dots. Wow!, it does have some velocity if you can get it in the case. Guess I will not be trying that powder.
__________________
Still Running Against the Wind
Reply With Quote
  #3  
Old 04-10-2011, 04:07 PM
David Sinko David Sinko is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Feb 2007
Posts: 2,089
Likes: 0
Liked 375 Times in 217 Posts
Default

How long has this stuff been on the market? I've never heard of it.

Dave Sinko
Reply With Quote
  #4  
Old 04-10-2011, 07:18 PM
Jellybean Jellybean is offline
Member
 
Join Date: Nov 2006
Posts: 2,698
Likes: 6
Liked 351 Times in 243 Posts
Default

Quote:
Originally Posted by Beemer-mark View Post
Next to no load date. Using Alliant's single recipe (no min, no max)...
I've never heard of it either so I can't give a lot of help, although I can tell you Alliant usually lists their max. load in their data sources and tell you to reduce by 10% for a start load and work your way up.
Reply With Quote
  #5  
Old 04-10-2011, 07:47 PM
David Sinko David Sinko is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Feb 2007
Posts: 2,089
Likes: 0
Liked 375 Times in 217 Posts
Default

If I can use this powder to get an honest 1050 FPS with 158 gr. bullets in my 2" Model 64 with no high pressure or flash (now where have we seen those ballistics?) I'd buy it.

Dave Sinko
Reply With Quote
  #6  
Old 04-10-2011, 09:44 PM
Buckey08 Buckey08 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Sep 2008
Location: mid-michigan
Posts: 600
Likes: 322
Liked 415 Times in 179 Posts
Default

Used this powder with 158 gr XTP's Saturday mourning in my 6" 686 and shot the best group I've ever shot.FPS and SD were great, I will admit the powder is on the fine side but doable in a old lyman #55 powder measure. Had to work up slow and ended up short of Alliant suggested loads. Will begin to prep 200 once fired cases for my new favorite load.From what I saw it's worth the hassle.
Reply With Quote
The Following User Likes This Post:
  #7  
Old 04-10-2011, 09:47 PM
Buckey08 Buckey08 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Sep 2008
Location: mid-michigan
Posts: 600
Likes: 322
Liked 415 Times in 179 Posts
Default

From what I've heard from a person not far from where I live this new powder works great in a .357 Max. I'll be testing this later this week.
Reply With Quote
  #8  
Old 04-10-2011, 09:54 PM
Beemer-mark Beemer-mark is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: May 2009
Location: Wilmington, NC
Posts: 1,014
Likes: 172
Liked 671 Times in 309 Posts
Default

I get 1180 fps with 16.6 gn 300 MP, 1171 with 14.0 gn of 2400. 158 gn LRN cast with #2 alloy in my model 28. No difference in accuracy.

Guess I'll have to bite the bullet and pay hazmat shipping fees again.
Reply With Quote
  #9  
Old 04-10-2011, 10:07 PM
parabarbarian parabarbarian is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Sep 2010
Location: Southern California
Posts: 299
Likes: 12
Liked 34 Times in 26 Posts
Default

Thanks for the information. I'e been looking that the velocity claims and considering 300 MP for 357 carbine loads. I use 2400 under a Hornady XTP now and it perform well but 300-MP seems almost magical.
Reply With Quote
  #10  
Old 07-07-2013, 08:58 AM
bearcat2 bearcat2 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Jul 2013
Posts: 1
Likes: 0
Liked 1 Time in 1 Post
Default

I realize this is an old thread, but I just got a 357 and was looking for load data for the powders I have in my bench. I had previously loaded for my moms 357 using hi-skor 700-x, but hated the powder (dirty, and didn't meter well in a progressive press) and used it all up without getting more. I have both 2400 and 300-MP, I have used both in 44 mag, but while my 218 Bee Imp absolutely loves 2400 (sub 1/4 moa groups) my 44 hates it. I like the powder, but my 44 absolutely will NOT group with it. On the other hand it loves 300-MP, to the tune of 1 1/2 to 2" groups at 25 yards, out of 4" Taurus Ultralite. I agree 300-MP is messy, but I have found it to meter very well, in fact more consistent than any other powder I have ran through my Loadmaster press, high velocity (can't remember the numbers off-hand but slightly greater than 2400) clean burning, and with accuracy like that (twice as accurate as any other load in my 44) it is all I feed my 44. I just have to vacuum my press and bench when I am done loading.

Well I guess I'll just have to load up some of each and see what my 357 likes.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 07-07-2013, 11:10 AM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

One of my hunting buddies on a hunting site used it in his 357 and he said that...................

Yes it does give high fps and it also gives..............

LOTS of FLASH & BOOM !!

Sort of like power pistol in the 38 spl.

It might be a love/hate powder ?
Reply With Quote
  #12  
Old 02-15-2014, 10:46 AM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Default

I loaded up some test rounds of this junk with 200gr Hornady XTPs and tested in my PC Stealth Hunter .44 magnum on my Ransom Rest. I loaded rounds at 27, 28, 29 grains. It almost overflows the .44 magnum case because it is so fluffy.

Worst performance by a firearm of all the testing we have done. Wild 6-10" fliers in most five shot groups. Blew unburned powder all over the bench. Lots of smoke and fire. Nasty stuff, I hope it will work well as fertilizer.
Reply With Quote
  #13  
Old 02-18-2014, 07:49 AM
pickupman250 pickupman250 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Nov 2013
Location: enfield C.T.
Posts: 42
Likes: 5
Liked 7 Times in 6 Posts
Default

I run this stuff in my .44 mag, 50 action express and 357 magnum. and I have had no trouble with it other than it is alittle messy. The chrono looks great, grouping is great and the flashy boom impresses all that watch.
Reply With Quote
The Following User Likes This Post:
  #14  
Old 02-18-2014, 10:05 AM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

I don't know, Alliant Power Pro 300-MP is rumored to be the same powder as W296/H110 and if that's true I don't see how it can be all that bad. I have been using W296 for a long time for full power .357 Magnum ammo and I'm very happy with the results.
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
The Following User Likes This Post:
  #15  
Old 02-18-2014, 03:52 PM
buck460XVR buck460XVR is offline
Member
 
Join Date: Dec 2006
Location: \'ell if I know
Posts: 1,100
Likes: 0
Liked 476 Times in 279 Posts
Default

Quote:
Originally Posted by ArchAngelCD View Post
I don't know, Alliant Power Pro 300-MP is rumored to be the same powder as W296/H110 and if that's true I don't see how it can be all that bad.

I heard the same thing....even read it in a gun rag(don't remember which one...I think it was "Handguns"). Anytime one uses a fine powder that nearly fills the case, there will be issues with it "jumping" outta a case when using a progressive press that has movement when used.
Reply With Quote
  #16  
Old 02-18-2014, 06:09 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

Might be close to w296 and H110 but..............

Alliant data is calling for a f100 primer........
not a mag primer.
Reply With Quote
  #17  
Old 02-22-2014, 04:49 PM
boatbum101 boatbum101 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 998 Times in 536 Posts
Default

With 2400 being unavailable I was curious about this powder & AA#9 for both 357 & 41 mags myself . Plenty of data for AA#9 , but not much out there for 300MP .
Reply With Quote
  #18  
Old 02-22-2014, 09:15 PM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Default

I have great results from Alliant 2400, Vihtavuori N-105, and AA #9. I sure couldn't make that 300MP work though. I did not use mag primers, I used CCI300.
Reply With Quote
  #19  
Old 02-22-2014, 10:25 PM
Buckey08 Buckey08 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Sep 2008
Location: mid-michigan
Posts: 600
Likes: 322
Liked 415 Times in 179 Posts
Default

I have had nothing but good luck with this powder in both .357 to .44 mag.I use a single stage press and a Lyman #55 powder measure with this powder and am having a real hard time with some of the horror stories I'm hearing, kinda hard to believe. My main hobby for the past 48 years has been reloading and the shooting sports so when I hear about some one having a reloading problem or a powder problem I tend to listen real carefully!
Reply With Quote
The Following User Likes This Post:
  #20  
Old 02-23-2014, 05:08 AM
parabarbarian parabarbarian is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Sep 2010
Location: Southern California
Posts: 299
Likes: 12
Liked 34 Times in 26 Posts
Default

Quote:
Originally Posted by ArchAngelCD View Post
I don't know, Alliant Power Pro 300-MP is rumored to be the same powder as W296/H110 and if that's true I don't see how it can be all that bad. I have been using W296 for a long time for full power .357 Magnum ammo and I'm very happy with the results.
I seriously doubt that. I've loaded several hundred 357 rounds with it and shot them through revolvers and Marlins. Both powders produce similar velocities at the high end with a slight edge to 300MP. I didn't try to compare smaller charges because H-110 doesn't react well to reduced loads. They are similar in performance but not the same powder.
Reply With Quote
The Following User Likes This Post:
  #21  
Old 02-23-2014, 11:10 AM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Default

Quote:
Originally Posted by buck460XVR View Post
I heard the same thing....even read it in a gun rag(don't remember which one...I think it was "Handguns"). Anytime one uses a fine powder that nearly fills the case, there will be issues with it "jumping" outta a case when using a progressive press that has movement when used.
I use a Dillon RL550B. I assure you, powder was not jumping out of the case.
Reply With Quote
  #22  
Old 02-23-2014, 02:29 PM
Ben_hutcherson Ben_hutcherson is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Nov 2012
Location: Frankfort, KY
Posts: 1,140
Likes: 117
Liked 771 Times in 368 Posts
Default

I have loaded a fair bit of this powder, but only in one load. I use 18gr under a 158gr SWC. It's accurate and chronographs at 1500fps out of my 8 3/8" 27-2(the recoil is also "snappy" in this gun).
Reply With Quote
  #23  
Old 02-24-2014, 09:59 AM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Unhappy

Quote:
Originally Posted by michaelnel View Post
I loaded up some test rounds of this junk with 200gr Hornady XTPs and tested in my PC Stealth Hunter .44 magnum on my Ransom Rest. I loaded rounds at 27, 28, 29 grains. It almost overflows the .44 magnum case because it is so fluffy.

Worst performance by a firearm of all the testing we have done. Wild 6-10" fliers in most five shot groups. Blew unburned powder all over the bench. Lots of smoke and fire. Nasty stuff, I hope it will work well as fertilizer.
I have read so many glowing reports of this powder in .44 magnum that I have had to seriously examine our tests that day.

The symptoms we saw that day really indicated incomplete and erratic combustion of the powder. Chronographed velocities varied way more than the other powders I load the .44 with (VV N105, Alliant 2400, AA #9). Here's an example of two five round groups shot out of my 7 1/2" barrel S&W Stealth Hunter in the Ransom Rest:

Two five shot groups, 27grs, CCI300 primers, Starline brass, Speer 200gr GDHP
(FPS):
1) 1163
2) 836
3) 1149
4) 1077
5) 1122

1) 1209
2) 1162
3) 1092
4) 1188
5) 1102

Two more at 28gr, everything else the same:
1) 1199
2) 1213
3) 1008
4) 1068
5) 1109

1) 1168
2) 1133
3) 1063
4) 946
5) 1044
6) 1219

2 more groups, 29gr this time:
1) 1171
2) 1251
3) 1262
4) 1346
5) 1212

1) 1239
2) 1295
3) 1271
4) 1218
5) 1200

The 29gr grouped the best, but all had lots of unburned powder all over the bench, and the velocities are WAY low compared to Alliant's prediction for this load of 1760 FPS for 29gr.

I had used CCI300 primers. Alliant's load data showed Fed150 primers for this powder. Both are straight Large Pistol primers, not Magnums.

I am thinking that with all these symptoms I should try this stuff again but with Large Pistol Magnum primers. I have a bunch of Federal 155 Large Pistol Magnum Match primers, so I loaded some up with both 200gr XTPs and 240gr XTPs and will go shoot them today. I took the MAX loads for both as published by Alliant and reduced them by 10% to allow for the Magnum primers (I had already shot the MAX 29gr with the non-Magnum primers without issue).

I won't have access to the chronograph or Ransom Rest today, but I will be able to shoot them over sandbags and see if the unburned powder problem remains. I am betting that it will perform better with the Magnum Match primers.

Last edited by michaelnel; 02-24-2014 at 10:01 AM.
Reply With Quote
  #24  
Old 02-24-2014, 06:10 PM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Default

I'm back from the range. Just as I suspected.... using the Federal 155 Magnum Large Pistol Match primers made all the difference in the world.

This is now one of the most accurate powders I have used in the .44 magnum. It shot as well as 2400 for me. No unburned powder flying out, nice small groups, lots of flash and boom. At least in MY gun, this stuff needs Magnum primers.
Reply With Quote
The Following User Likes This Post:
  #25  
Old 02-25-2014, 02:49 PM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

Quote:
Originally Posted by Nevada Ed View Post
Might be close to w296 and H110 but..............

Alliant data is calling for a f100 primer........
not a mag primer.
Alliant doesn't recommend magnum primers for any of their loads, at least I think they don't.
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
  #26  
Old 02-26-2014, 12:51 PM
EazyT EazyT is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Jan 2014
Posts: 20
Likes: 0
Liked 5 Times in 4 Posts
Default

Quote:
Originally Posted by michaelnel View Post
I'm back from the range. Just as I suspected.... using the Federal 155 Magnum Large Pistol Match primers made all the difference in the world.

This is now one of the most accurate powders I have used in the .44 magnum. It shot as well as 2400 for me. No unburned powder flying out, nice small groups, lots of flash and boom. At least in MY gun, this stuff needs Magnum primers.
Just FYI Federal says their primers burn hotter and longer than other brands of primers. Also that while other companies use regular explosive compounds they use a high explosive compound and this is why they have to package them differently than other companies. Ever notice the massive plastic packaging? They say that is why that huge plastic tray is needed. So it makes sense that alliant would recommend a the hotter Federal primer for this slow burning Magnum powder.
Reply With Quote
  #27  
Old 02-27-2014, 08:37 AM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Default

WLP might work too, as Winchester designates them as being for regular or magnum loads. I do know that CCI300 sure did not get a good fire started.
Reply With Quote
  #28  
Old 02-27-2014, 09:57 PM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Default

I had emailed Alliant about my experience with this powder. Here is their response. I think he told me I'm a dummy.

"Michael,

To start with I see that you said " Do you folks have any idea why the performance was so bad (1250fps with the 200gr XTPs when your data predicts 1700+)"

When I look at the load data, I found no data using a Hornady bullet. You used data for the Speer bullet. That is like comparing apples to oranges. When you have a bullet, in this case a Hornady bullet, you need to use the Hornady load data. The bullets are made differently and behave differently when under the intense pressures that are created when fired.

In this instance the starting load for this powder and the 200 XTP bullets from the Hornady #9 manual is 25.9 and a maximum of 29.9 grains. Now, I realize that this is a similar load to that which you fired, but Hornady's published velocities are from 1300 - 1600 fps.

Hornady also used the Winchester Large Pistol Primer.

If the recipe calls for a large pistol primer then that is the primer that is to be used. Using magnum primer will increase pressures. If pressures are in excess of the cases ability, then firearm damage could result which could also lead to personal injury.

If you are not finding complete powder burn at the upper end of the load limits, try the lower limits. Start at the 25.9 grains and work up."
Reply With Quote
  #29  
Old 02-27-2014, 10:02 PM
michaelnel michaelnel is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Dec 2013
Posts: 106
Likes: 22
Liked 75 Times in 26 Posts
Default

Then I read the review of Power Pro 300MP in the February 2010 issue of Handloader where the author was surprised they didn't require magnum primers.

He said he compared the stuff with LP and LPM primers and in every case the LPM outshot the LP primers. More accurate, more consistent velocities, higher velocities.

That sure parallels what I found, although it's a very small sample.
Reply With Quote
  #30  
Old 05-07-2014, 02:18 AM
tomhenry tomhenry is offline
Member
 
Join Date: Sep 2004
Posts: 500
Likes: 82
Liked 364 Times in 109 Posts
Default

I know this is an old thread, but I stumbled onto it while googling load data for the 300 MP with 180 grain 44 mag bullets.

There is no load data for the 180 grain bullet and this powder. Alliant's book has 29 grains 300 MP for the 200 grain bullet. 25 grains powder for the 210 grain bullet. 22 grains powder for the 300 grain bullet.

The charges are all maximum loads.

Where would be a safe starting point for the 180 grain?
Reply With Quote
  #31  
Old 05-07-2014, 11:02 AM
johngalt's Avatar
johngalt johngalt is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Feb 2007
Location: St. Paul (smokey!) MN
Posts: 5,335
Likes: 1,443
Liked 6,647 Times in 2,564 Posts
Default

Quote:
Originally Posted by tomhenry View Post
I know this is an old thread, but I stumbled onto it while googling load data for the 300 MP with 180 grain 44 mag bullets.

There is no load data for the 180 grain bullet and this powder. Alliant's book has 29 grains 300 MP for the 200 grain bullet. 25 grains powder for the 210 grain bullet. 22 grains powder for the 300 grain bullet.

The charges are all maximum loads.

Where would be a safe starting point for the 180 grain?
What does 'no data' mean? Have you checked both the powder and bullet manufacturers?

If there is no data for that bullet, there may be a reason. Possibly it is an unsafe combinations. Or that bullet may be too light to make effective use of the powder. Or maybe they just haven't gotten to it yet.

In general, heavier bullets use less powder than light bullets. This means that you can normally use the data intended for heavy bullets with light bullets, everything else being equal (same design, lead vs jacketed, etc).

The reverse is NOT true - never use data intended for light bullets with heavy bullets. This can easily result in an overload situation.

In your case, the powder charge drops as the bullet weight increases. You can probably use the data for 200 gr bullets. As always, start low.

Disclaimer: I have never used MP-300 or .44 mag, so everything I've said may be completely wrong.
__________________
Common sense isn't so common.
Reply With Quote
  #32  
Old 05-07-2014, 12:06 PM
tomhenry tomhenry is offline
Member
 
Join Date: Sep 2004
Posts: 500
Likes: 82
Liked 364 Times in 109 Posts
Default

Quote:
Originally Posted by johngalt View Post
What does 'no data' mean? Have you checked both the powder and bullet manufacturers?
I've checked Alliant's info online and in their manual (which I have in front of me). There is no data for the 180 gr bullet. Actually, the data which they have listed is only for maximum charges. They don't list any safe beginning charge. Alliant is notorious for too little information.

And I've checked Hornady's website. They say to check ballistics data on their online store link, but I can't find their "online store" link. ???

Quote:
that bullet may be too light to make effective use of the powder.
That's curious, because Alliant's reloading manual gives powder charges for 300MP for 125 grain 357 bullets. If it's suitable for the 125 grain bullet, I can't see where there would be a problem with the 180 grain bullet.
Reply With Quote
  #33  
Old 05-07-2014, 04:36 PM
Domino300 Domino300 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Aug 2012
Location: North Central Ohio
Posts: 14
Likes: 6
Liked 2 Times in 2 Posts
Default

received info for for MP-300 from Alliant a year ago for 41 Mag:


Amonette, Ben([email protected])


3/26/13

To: xxx

We have not tested 300MP in this application but you might start with 21 grs and the max should be approx. 23 grs. Be sure and start with the minimum charge regardless of which primer you choose. A firm crimp on the bullet is recommended. Thanks for your note.

I settled on 22.5 gns.,WLP, with Sierra 210JHC and avg. 1394 fps. I remember a wide variation in the fps though.
Reply With Quote
  #34  
Old 06-01-2014, 10:17 AM
aurora40 aurora40 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Sep 2013
Posts: 247
Likes: 34
Liked 82 Times in 62 Posts
Default

Quote:
Originally Posted by tomhenry View Post
I've checked Alliant's info online and in their manual (which I have in front of me). There is no data for the 180 gr bullet. Actually, the data which they have listed is only for maximum charges. They don't list any safe beginning charge. Alliant is notorious for too little information.

And I've checked Hornady's website. They say to check ballistics data on their online store link, but I can't find their "online store" link. ???
You have to buy the book to get Hornady's data. Just FYI, they don't have any 180gr .44 Mag data for 300-MP either in the 9th edition. They actually don't list any for H110/W296, AA#9, or other slow powders for the 180gr XTP. Perhaps the lighter bullets don't hold together well at higher velocities?

In the bullets data section, they list a range of 750-1400 fps for the 180 gr XTP, whereas the 200 gr is "ok" up to 1650fps, and the heavier bullets are good up to 2200.

I get what you mean about Alliant's data. But they do say to start 10% under the listed. And it is free. Hornady has fewer combos tested with 300-MP, and it isn't free. Though they do list a range of loads for the bullets they did test. But there's no pressure info or anything either.
Reply With Quote
  #35  
Old 11-04-2014, 11:39 PM
Jaymo Jaymo is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Jan 2013
Posts: 2,668
Likes: 3,512
Liked 1,578 Times in 912 Posts
Default

The Vihtavuori load manual from the mid 1990s listed 27.1 grains of N110 and a 180 grain XTP doing 1816 fps from a 7" barrel.
I can tell you from experience that the bullets don't hold up great at that velocity.
A few years later, they increased the max load to 27.5 grains of N110 with the 180 XTP.
Now, they've dialed it back a bunch.
I don't know why, the pressure listed at 27.1 grains was about 3,000 psi below max pressure for .44 mag.

I'm thinking 300 MP is capable of the same level of performance, but there's not much point in driving a 180 grain XTP that fast.
__________________
What would Jim Cirillo do?
Reply With Quote
  #36  
Old 05-30-2017, 10:46 AM
sw282's Avatar
sw282 sw282 is offline
Member
 
Join Date: Jun 2009
Location: CSRA
Posts: 2,125
Likes: 869
Liked 1,629 Times in 779 Posts
Default

Old thread, but new to me... Found 2 boxes of 158gr XTPs in my stash.

My Hornady #9 says Power Pro 300MP will make them fly 200fps FASTER.

''A bunch more than the next powder flavor listed''

Just looking for the BEST and Fastest ''SAFE'' load for my 686 Competitor.

Got some 55 pound steel Rams l need to K I L L @200 Meters...

thanks

282

Last edited by sw282; 05-30-2017 at 11:25 AM.
Reply With Quote
  #37  
Old 06-04-2017, 10:38 AM
aurora40 aurora40 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Sep 2013
Posts: 247
Likes: 34
Liked 82 Times in 62 Posts
Default

Quote:
Originally Posted by sw282 View Post
My Hornady #9 says Power Pro 300MP will make them fly 200fps FASTER.

''A bunch more than the next powder flavor listed''
I think part of the reason for that is that they used an 8" barrel. For me, with a 4" 357, I was only ever able to get 1220 FPS with a max load of 300MP and a 158gr bullet (using Alliant data and components, which was about a full grain higher than the Hornady data). This is not overly impressive, and factory ammo like American Eagle exceeds it in my firearm. However, it really came alive in a 16" carbine, going almost 1900 FPS.

I think the longer the barrel, the more likely it will exceed other magnum powders.
Reply With Quote
  #38  
Old 06-04-2017, 08:47 PM
muddocktor's Avatar
muddocktor muddocktor is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Oct 2014
Location: South Louisiana
Posts: 5,346
Likes: 11,606
Liked 9,018 Times in 3,192 Posts
Default

I've also found that 300MP also likes a closed chamber better than an open chamber such as a revolver also. I had loaded some in 357 Mag and also in 44 Mag. I don't remember the data, but do remember they weren't very far off from max load data from the Hornady #9 manual. In my 5" 27-2, they were some of the dirtiest rounds I've shot in that pistol and they didn't feel especially powerful. But out of my 20" barrel Rossi 92 SRC they kicked some serious butt. And in 44 Mag, I didn't own a revolver at the time; just a Desert Eagle. And in the DE they were some potent rounds and a real hoot to shoot with big recoil and flash. And in my 20" barrel Browning B-92, they would kill on both ends. They were accurate but recoil in that gun would eat your shoulder up and after around 20 rounds they were not fun at all.
Reply With Quote
  #39  
Old 06-27-2017, 09:39 PM
g17's Avatar
g17 g17 is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Jan 2007
Location: KY
Posts: 296
Likes: 301
Liked 102 Times in 58 Posts
Default

Recently, I've been playing around with 300MP and hope to do so more testing next week. I've favor 2400 for my magnum loads but 300MP seems promising so far. It's very fine but meters well from my chargemaster and it burns clean enough. From a 4" GP100 using Alliant data and S&B primers, I averaged 1324fps/615.10ft-lbs with Nosler 158gr jhp and 1560fps/675.58ft-lbs with Everglades 125gr jhp. I wasn't able to shoot under the best conditions so will be clocking this some more using different barrel lengths to see how it works out.
Reply With Quote
  #40  
Old 07-04-2017, 06:07 PM
Dave Workman's Avatar
Dave Workman Dave Workman is offline
Member
Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant Power Pro 300-MP Rant  
Join Date: Mar 2015
Location: Washington state
Posts: 187
Likes: 52
Liked 259 Times in 81 Posts
Default

I have come into a pound of this stuff. I intend to try it in my .41 Magnums, but loading data is almost non-existent, and this propellant has been around long enough that YOU WOULD THINK(!) that somebody at Alliant / Speer / Sierra etc would have by now come up with some loading data.
Geez, Louise!
I found one — COUNT 'EM, 1 — load for a 125-grain JHP for .357 Mag, and it frankly seems a bit hot for a .357 Magnum.
The burn rate is about the same as H110 and 296, according to a chart in Nosler #8.
Reply With Quote
Reply

Tags
357 magnum, 44 magnum, 686, carbine, hornady, model 28, rcbs

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
OMG Please allow a rant...... rwsmith The Lounge 14 05-27-2014 09:46 PM
Wolff "Power Rib" Type 2 reduced power Mainsprings JayHutch S&W Revolvers: 1980 to the Present 33 01-31-2013 03:31 PM
Hi Power has been Traded !!!WTS/WTT Browning Hi Power MKIII 40 S&W (NH) Two Guns GUNS - For Sale or Trade 2 04-13-2012 06:01 PM
I got a Hi-Power Practical ! I got a Hi-Power Practical ! NOW WITH PICTURES !!!! shooboy Firearms & Knives: Other Brands & General Gun Topics 29 03-21-2009 06:45 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 02:55 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)