|
|
05-31-2011, 10:20 AM
|
|
Member
|
|
|
Join Date: Sep 2003
Location: Indiana
Posts: 3,588
Likes: 2,259
Liked 3,498 Times in 1,486 Posts
|
|
Chrony and 135 gr. Gold Dot .38's
A buddy invited me to test some loads on his Chrony. When testing the Speer short barrel 135 gr. Gold Dot .38 SPL loads in my S&W 642 we got velocities in the 880-890 range. When I shot the same round in my S&W 60-10 the velocity went up another 90 fps. This surprised me, as I usually apply the rule of thumb of an increase of 35-50 fps for every extra inch of barrel. The Gold Dot round in .357 mag produced velocities near 1,400 fps out of the model 60-10! The temperature was around 85 degrees and we were about 10' from the Chrony. I had never used a chronograph and have to say that this session was very informative.
|
05-31-2011, 10:22 AM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,259
Likes: 9,419
Liked 8,912 Times in 2,574 Posts
|
|
Yep, time with an actual chronograph will have you rolling your eyes whenever you see a "rule of thumb" posted on a thread about barrel length and velocity.
|
05-31-2011, 10:36 AM
|
Member
|
|
|
Join Date: Sep 2008
Location: Central NC
Posts: 583
Likes: 24
Liked 37 Times in 18 Posts
|
|
Quote:
Originally Posted by Erich
Yep, time with an actual chronograph will have you rolling your eyes whenever you see a "rule of thumb" posted on a thread about barrel length and velocity.
|
I agree. There are other factors at work in addition to barrel length. B/C gap, powder burn rate, bullet fit and bore condition are some that come to mind. If you want to know the velocity of a particular load. You can make an educated guess, which may or may not be right, or you can run it across a chrono.
__________________
Andy
|
05-31-2011, 12:36 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,089
Likes: 10,801
Liked 15,516 Times in 6,802 Posts
|
|
And here I always thought the thumb rule was 100 FPS per inch??
__________________
Still Running Against the Wind
|
05-31-2011, 12:57 PM
|
Suspended
|
|
|
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,747
Likes: 1,590
Liked 8,914 Times in 3,554 Posts
|
|
The only time that velocity difference per inch means anything is if the test is run in the same gun and the barrel shortened! When shooting different guns with the same ammunition it is not unusual to see as much as 150-200 FPS difference brtween different guns having the same barrel length. This is particulerly true with revolvers.
|
05-31-2011, 06:30 PM
|
|
Member
|
|
|
Join Date: Sep 2003
Location: Indiana
Posts: 3,588
Likes: 2,259
Liked 3,498 Times in 1,486 Posts
|
|
I was really floored that the .357 mag. Gold Dot with 135 gr. bullet would produce such high velocities out of a 3" barrel. It would be interesting to see how well it expands and holds together in gelatin at those velocities. I'll leave that to someone else.
|
05-31-2011, 06:38 PM
|
Member
|
|
|
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,161
Likes: 3,622
Liked 5,211 Times in 2,174 Posts
|
|
__________________
Science plus Art
|
05-31-2011, 06:59 PM
|
|
Member
|
|
|
Join Date: Sep 2003
Location: Indiana
Posts: 3,588
Likes: 2,259
Liked 3,498 Times in 1,486 Posts
|
|
Those tests in water look pretty impressive. I've loaded up some of the GD 135 gr. bullets in .38 SPL. I used the recommended 6.4 grains of Alliant Power Pistol. They don't quite match the velocity of factory ammo (about 60 fps short), and there are no signs of high pressure. I think I might step up the charge a tenth of a grain or two. Has anyone loaded these bullets with more than 6.4 grains of Power Pistol?
|
05-31-2011, 10:58 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2004
Location: Rural, CT
Posts: 1,721
Likes: 578
Liked 1,390 Times in 324 Posts
|
|
My results with factory ammo were not that fast. I have duplicated it for my practice.
357 135 GDSB
2" 952
4" 1132
__________________
Shoot fast & live long
Warren
Last edited by roundgunner; 06-04-2011 at 09:42 PM.
|
06-01-2011, 01:22 AM
|
Member
|
|
|
Join Date: Oct 2010
Posts: 129
Likes: 4
Liked 80 Times in 16 Posts
|
|
Quote:
Originally Posted by BE Mike
A buddy invited me to test some loads on his Chrony. When testing the Speer short barrel 135 gr. Gold Dot .38 SPL loads in my S&W 642 we got velocities in the 880-890 range. When I shot the same round in my S&W 60-10 the velocity went up another 90 fps. This surprised me, as I usually apply the rule of thumb of an increase of 35-50 fps for every extra inch of barrel. The Gold Dot round in .357 mag produced velocities near 1,400 fps out of the model 60-10! The temperature was around 85 degrees and we were about 10' from the Chrony. I had never used a chronograph and have to say that this session was very informative.
|
near 1400 seems right for the 125gr 357 load but not the 135gr
|
06-01-2011, 10:39 AM
|
|
Member
|
|
|
Join Date: Sep 2003
Location: Indiana
Posts: 3,588
Likes: 2,259
Liked 3,498 Times in 1,486 Posts
|
|
Quote:
Originally Posted by maiko
near 1400 seems right for the 125gr 357 load but not the 135gr
|
Actually the velocity recorded was 1,387 fps for the factory load. The handloads for the .357 Mag. with 135 gr. bullet with 9.6 grains of Power Pistol were consistently around 1,200 fps. This was out of a 3" barrel S&W model 60-10. We were around 1,500 feet above sea level and around 85 degrees with 55% humidity that day.
|
06-01-2011, 11:45 AM
|
|
Member
|
|
|
Join Date: Aug 2002
Location: Morgan County Alabama -
Posts: 440
Likes: 156
Liked 134 Times in 58 Posts
|
|
Quote:
Originally Posted by BE Mike
Actually the velocity recorded was 1,387 fps for the factory load. The handloads for the .357 Mag. with 135 gr. bullet with 9.6 grains of Power Pistol were consistently around 1,200 fps. This was out of a 3" barrel S&W model 60-10. We were around 1,500 feet above sea level and around 85 degrees with 55% humidity that day.
|
I would never have imagined that a 135-gr factory load would approach 1400-fps from a 3" J-frame.
Wow! It sounds punishing!!!
|
06-01-2011, 01:36 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,259
Likes: 9,419
Liked 8,912 Times in 2,574 Posts
|
|
My handloaded-to-Speer-recommendation loads were not that warm (and the .38s were not all that accurate):
.38 Spl +P with 6.4 gr Power Pistol (5950' > sea level, 10% humidity, winds calm, 58° F):
From the 3" 36-1: M 917.8/ES 75.9/SD 24.59
From the 2 1/8" DS: M 863.6/ES 59.7/SD 19.65
From the 1 7/8" 37-2: M 854.3/ES 78.9/SD 40.66
.38 Spl +P with 7.2 gr. HS-6 and a CCI magnum primer in .38 PMC cases, with a firm crimp (5950'>sea level, 57°F, c. 40% humidity):
4" GP-100: M 978.8 fps/ES 96.48/SD 36.37
3" S&W 36-1: M 858.8/ES 83.22/SD 33.74
2 1/8" DS: M 827.8/ES 92.01/SD 38.47
I wasn't thrilled with these results, so I shot it again:
4" GP-100: M 942.0/ES 103.1/SD 41.91
3" S&W 36-1: M 878.6/ES 67.11/SD 26.96
2 1/8" DS: M 813.2/ES 46.25/SD 17.74
Okay, now for some .357 Magnum loads from the 2" Rhino (c.55 degrees F/30% humidity/Range (5950'>sea level)
.357 Magnum loadings:
AA#7 12.1 gr under 135-gr Speer short barrel GDHP, CCI 500 std primer, firm roll crimp:
First six: M 1012/ES 39.88/SD 17.66
Second six: M 1022/ES 69.85/SD 25.96
Power Pistol 9.6 gr under same bullet, w/ same primer/crimp:
First six: M 1013/ES 37.42/SD 16.24
Second six: M 1025/ES 46.83/SD 16.03
AA loading was much louder. I'm carrying the Magnum Power Pistol loading in the Rhino . . . seems like a decently useful loading.
|
06-01-2011, 07:50 PM
|
|
Member
|
|
|
Join Date: Jun 2010
Location: Indy
Posts: 304
Likes: 158
Liked 115 Times in 34 Posts
|
|
Erich:
Thanks for the info. I've been using Power Pistol with 125gr .357 loads, with good results and I'm getting ready to try loading some 125gr .38 Spls with it.
|
06-01-2011, 09:09 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,259
Likes: 9,419
Liked 8,912 Times in 2,574 Posts
|
|
You're welcome - sorry that I don't have data from other barrel lengths - I was specifically looking for a carry load for the Rhino.
|
06-01-2011, 09:12 PM
|
|
Member
|
|
|
Join Date: Jun 2010
Location: Indy
Posts: 304
Likes: 158
Liked 115 Times in 34 Posts
|
|
I'm interested in the 2"-4" barrel lengths, perfect.
|
|
Posting Rules
|
|
|
|
|