|
|
07-14-2011, 09:11 PM
|
Member
|
|
|
Join Date: Jan 2010
Location: Desert Southwest
Posts: 181
Likes: 0
Liked 4 Times in 4 Posts
|
|
Sorting Handgun Brass - What Say You?
Over the last few years I have accumulated a fairly large quantity of handgun brass in various calibers. Most of it is .45 ACP, 9mm, and .38 Special. I have been sorting it into four categories by head stamp, Remington, Winchester, Federal, and everything else combined. I have way more than I can ever use up, so I thought I would clean it up and try to sell some.
When selling handgun brass, does it matter if it is mixed head stamps, or do you think it is important to sort it by brand?
|
07-14-2011, 09:19 PM
|
|
Member
|
|
|
Join Date: Aug 2005
Location: New Hampshire
Posts: 1,173
Likes: 212
Liked 838 Times in 262 Posts
|
|
Tough question, maybe some each way. My plinking loads, I go ahead and mix brass. It doesn't matter. Anything I load up for more serious work, hunting or SD, I use all the same brass, because I want as close as I can get to exact duplicate cartridges.
__________________
Geoff. Since 1960.
|
07-14-2011, 09:28 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2010
Location: Location Location
Posts: 717
Likes: 335
Liked 414 Times in 175 Posts
|
|
I don't think it matters. I would buy some .45 and I don't really care about headstamps - just primer size. I've seen Federal brass in .45 that was made for Sm primers.
|
07-14-2011, 10:36 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Lafayette, Tennessee
Posts: 6,926
Likes: 6,833
Liked 8,936 Times in 2,910 Posts
|
|
I like to buy mixed headstamp brass advertised in the classifieds. The reason I like them is because they're usually really cheap. If you want a bit more money, seperate them. If you want ease and convenience, don't.
|
07-14-2011, 10:37 PM
|
|
Member
|
|
|
Join Date: Apr 2005
Location: PA.
Posts: 578
Likes: 31
Liked 130 Times in 76 Posts
|
|
While I have no hard evidence to support my theory, I believe people will pony up a few extra bucks for a lot of brass if it all has the same headstamp. I sort by headstamp, because some brands of brass have tight primer pockets which I prefer to prime with a RCBS bench mounted priming tool. The other brands run just fine through my Hornady Lock-N-Load.
|
07-14-2011, 10:41 PM
|
|
Member
|
|
|
Join Date: Jan 2003
Location: High Desert of NM, USA
Posts: 6,235
Likes: 9,320
Liked 8,816 Times in 2,554 Posts
|
|
Intellectually, I understand that there's good evidence for there being no reason whatsoever to do it ( see this month's Handloader, for instance). Nevertheless, I sort my brass.
I'm 5/8 German, after all.
|
07-14-2011, 11:04 PM
|
Member
|
|
|
Join Date: Feb 2010
Location: Florida
Posts: 1,338
Likes: 65
Liked 247 Times in 166 Posts
|
|
Quote:
Originally Posted by Erich
Intellectually, I understand that there's good evidence for there being no reason whatsoever to do it ( see this month's Handloader, for instance). Nevertheless, I sort my brass.
I'm 5/8 German, after all.
|
I'm 3/4 German but the Irish in me says screw it.
|
07-14-2011, 11:11 PM
|
|
US Veteran
|
|
|
Join Date: Aug 2007
Location: Augusta, GA
Posts: 6,113
Likes: 6,644
Liked 6,156 Times in 2,666 Posts
|
|
The Norwegian in me don't care. I reload so I can shoot not sort brass, but I do sort by caliber. My 38 spl is brass, and 357 mag is nickled because I too old to read that many head stamps.
__________________
S&WHF 366
Last edited by Engineer1911; 07-15-2011 at 06:01 AM.
|
07-15-2011, 12:04 AM
|
Member
|
|
|
Join Date: Jul 2004
Location: Michigan\'s Upper Peninsu
Posts: 3,337
Likes: 207
Liked 1,644 Times in 756 Posts
|
|
Most of my handgun loads are in mixed brass. I load brass and nickel cases together too, usually.
I do sort rifle brass more often. Hunting and target loads I try to use brass with the same headstamp and year if I can tell it.
Made a lot of target loads in .308 in Lake City 68 brass.
|
07-15-2011, 12:14 AM
|
|
Member
|
|
|
Join Date: Jan 2008
Location: sunny Orygun
Posts: 2,910
Likes: 392
Liked 307 Times in 195 Posts
|
|
Uffdah! to the headstamp sorting.
I've never been able to demonstrate any kind of measurable difference in my own reloads.
I know there are folks who believe it's important.
I'm a skeptic.
Are you selling some brass now?
__________________
Dum vivimus Vivamas
|
07-15-2011, 04:52 AM
|
|
Member
|
|
|
Join Date: Oct 2003
Location: Central, Ohio
Posts: 392
Likes: 12
Liked 17 Times in 13 Posts
|
|
To me in plinking loads it doesn't matter anymore. There was a time when I would sort it out but I've picked up so much over the years I just lump it all together any more. Different brands in brass and nickel, large primer, small primer, large flash hole, small flash hole. Took too many bins. Now if I shoot any of it at least I know how many times it's been shot by me and none of it gets left out. It's especially useful if I'm going to a range where I'm not guaranteed to find or get it all back. There's nothing worse than shooting new brass only to have it land beyond the shooting line and you can't retrieve it.
Sorting "my" brass however is a different story.
|
07-15-2011, 06:46 AM
|
Banned
|
|
|
Join Date: Mar 2006
Location: Hoosier Land!
Posts: 4,379
Likes: 587
Liked 576 Times in 307 Posts
|
|
I'm in the "used to" crowd. When shooting competition, I try to have the same brand brass in the ammo box but haven't been doing that lately so...
It all goes into the tumbler and into the XL650's case feeder. It doesn't have a problem with it, I guess I won't either!
|
07-15-2011, 06:49 AM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
|
|
The American in me just wants to hord up all the brass I can afford. My bucket of .45 ACP is getting half empty...
|
07-15-2011, 09:43 AM
|
Banned
|
|
|
Join Date: Mar 2006
Location: Hoosier Land!
Posts: 4,379
Likes: 587
Liked 576 Times in 307 Posts
|
|
Quote:
Originally Posted by Maximumbob54
The American in me just wants to hord up all the brass I can afford. My bucket of .45 ACP is getting half empty...
|
No me! Mine is so full it is running on the floor!
Just getting the three full 3lb coffee cans into the tumbler through the night and day today! Had to interrupt them to run the 3lb coffee can full of dirty 44Mag brass though. Second can in the tumbler now though!
My 45ACP brass is pretty cheap though. 5 gallon bucket, free to $10, depending on the mood of the range guy that day!
|
07-15-2011, 10:21 AM
|
|
Member
|
|
|
Join Date: Jan 2011
Location: Rocky Top, TN
Posts: 412
Likes: 75
Liked 141 Times in 49 Posts
|
|
I still sort by headstamp. I find it serves several purposes: Making sure the caliber is correct (I found some .45 GAP mixed in with my .45 ACP brass); in rifle brass checking for incipient case separation; and I have OCD, so it makes me feel better.
In a recent lot of .30-06 I found some .270, .280, .30-30, and .32 Special cases along with some Frankford Arsenal brass from 1909.
So I prefer to sort.
David
|
07-15-2011, 10:22 AM
|
|
Member
|
|
|
Join Date: Feb 2011
Location: Green, Ohio
Posts: 222
Likes: 1
Liked 2 Times in 2 Posts
|
|
im new to reloading so I haven't acquired that much brass yet. Just in the process of picking up another caliber pistol so my sorting and storing isn't beyond unmanageable yet. So I separate by head stamp. Im hoping to reach the point were I have so much brass I don't know what to do with it all. Then yes Ill probably just keep it mixed.
__________________
sw9ve, 24/7 pro Ds, Hs M4
|
07-15-2011, 10:46 AM
|
|
Member
|
|
|
Join Date: Feb 2011
Location: Green, Ohio
Posts: 222
Likes: 1
Liked 2 Times in 2 Posts
|
|
well it comes down to a time thing for me (and a storage thing for most.) Using a semi auto, its hard to find brass on the ground, let alone making sure its yours.. At the end of a range trip I have a large zip lock bag full of mixed brass, some mine, some other. All different types of calibers. So I do an initial sorting by caliber then like I mentioned earlier, I have the time and room so I sort by head stamp.
Once I collect a wider supply of brass I'm probably gonna throw the head stamp sorting out the window. Unless there is a specific reason or I feel like being overly organized ( which I often am.) It would be far easier and less time consuming for something like a rifle or revolver. Altho I am a fan of having things organized to the 100th degree. So long as room allows it w/o looking overly cluttered, I will probably sort by head stamp. But for me using an auto loader its solely about organization ( I'm necrotic.)
__________________
sw9ve, 24/7 pro Ds, Hs M4
|
07-15-2011, 10:50 AM
|
|
US Veteran
|
|
|
Join Date: Apr 2003
Location: Bandana, NC
Posts: 489
Likes: 4
Liked 65 Times in 32 Posts
|
|
I believe it has some importantance on accuracy and even feeding. I used to shoot some bullseye and worked the loads for my guns on a Ransom rest. I have seen different brass make a difference when using the same bullets, powder and primers. I have also seen brass differences have an impact on feeding in some guns. My working theory on this is centered on differences in case length, throat thickness and case thickness in general - they all vary. Nickel cases are also harder than full brass. If you are reloading different brass all at the same time with the same press set up this can particularly become an issue. Is it a big difference - depends on what you are looking for. Spend some time on a Ransom Rest and i think you'll agree. Not specifically brass related but I used only CCI Standard Velocity in my S&W 41. At 25 yds in the rest it would hold a group under and inch all day. Run some Federal Hi-Vel jacketed rounds through it and the group would open up to about 4".
Needless to say I sort my brass - I even try not to mix different lots of the same head stamp (got some German in me too ).
|
07-15-2011, 12:27 PM
|
Member
|
|
|
Join Date: Aug 2006
Location: EP MINNESOTA
Posts: 293
Likes: 2
Liked 19 Times in 15 Posts
|
|
DEPENDS, as they say, on what exactly you are talking about. If you shoot a lot of 223 and don't sort and include the various commercial brands and military you may be in for problems. A safe pressure load in Win or Rem brass may not be safe in Lapua or some of the military. You could very quickly find yourself in over pressure problems. Lapua for example is much heavier brass than most other commercial brands and this means that the internal capacity is reduced. Smaller chamber with standard loads means higher pressures. It is this actual chamber volumn that we are concerned with in reloading. By varying this chamber volumn we are also affecting velocity and as a result, likely the accuracy as well.
While this is not as important with most of our handgun shooting, the same principles still remain.
Consistency is the key to accurate handloads and it does not come from mixing brass.
For some of our shooting this is very important, and for some, it is not important. You get to decide what you want.
Ward
|
07-15-2011, 01:34 PM
|
Member
|
|
|
Join Date: Dec 2008
Location: Seattle
Posts: 1,948
Likes: 38
Liked 821 Times in 490 Posts
|
|
I almost have more brass than I know what to do with, and I sort by headstamp when I load for consistency, i.e. mostly for my rifles. I still sort my .44 Spl., but not my .38 Spl.
jc85, I hope you meant "neurotic".
Larry
|
07-15-2011, 01:45 PM
|
|
Member
|
|
|
Join Date: Feb 2011
Location: Green, Ohio
Posts: 222
Likes: 1
Liked 2 Times in 2 Posts
|
|
naw I mean im dead tissue..
haha yes, my bad. spell check dosnt always work in your favor =)
__________________
sw9ve, 24/7 pro Ds, Hs M4
|
07-16-2011, 03:42 PM
|
|
Member
|
|
|
Join Date: Mar 2007
Location: Iowa
Posts: 20
Likes: 110
Liked 2 Times in 1 Post
|
|
I always sort for length and headstamp for 9mm, as I think it makes a difference (I shoot bullseye). I quit using range brass years ago now I only use Starline for everything but 327 (only because they don't make it yet). I guess I just like consistency (German and Finnish). - gene
|
07-16-2011, 04:00 PM
|
SWCA Member
|
|
|
Join Date: Oct 2004
Location: The mountains of Colorado
Posts: 213
Likes: 534
Liked 161 Times in 77 Posts
|
|
Sorting DOES make a difference
As a buyer, I am willing to pay more for sorted brass. I believe it definitely does make a significant difference in the consistency of the reloading process. For example, R-P 45ACP is consistently "thin" and loose and requires a lot more crimp; Speer 45ACP is stiff and tight and requires more of a flare to prevent shaving the bullets when seating. Federal and W-W are the most consistently uniform.
Does it make any huge difference in accuracy? Well,if you're just plinking around, probably not enough to notice, but, if you are in a bullseye tournament where a few points seperate places, I believe in giving myself every chance possible.
The only time I will use mixed brass is if I am just banging around in the great outdoors where I will not likely be recovering the used brass anyway.
|
07-16-2011, 04:26 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,465 Times in 6,787 Posts
|
|
Bah!
For handgun shooting I doubt it makes a difference.(Actual shooting maybe a mental thing) Unless you are some pro competition shooter.
I would like to see a study done with average to good shooters and give them ammo all loaded the same, only with different brass and see what the results are.
For competition benchrest rifle shooters where everything matters to them, yes it probably matters.
__________________
Still Running Against the Wind
|
07-16-2011, 05:04 PM
|
|
Moderator
|
|
|
Join Date: Jan 2004
Location: Columbus Ohio
Posts: 4,579
Likes: 931
Liked 3,590 Times in 816 Posts
|
|
Rifle brass get sorted by head stamp, rifle and usage count. Handgun brass not so much, I only sort it by nickle or not.
__________________
Regards,
Guy-Harold Smith II
|
07-17-2011, 04:47 AM
|
Member
|
|
|
Join Date: Aug 2009
Posts: 124
Likes: 3
Liked 12 Times in 4 Posts
|
|
The ransom rest has proven to me that sorting absolutely makes a difference in accuracy. Unfortunately I cant shoot well enough myself to tell the difference. I still sort it though just in case my shooting ever improves to that level. (actually just a dream)
|
07-17-2011, 08:00 AM
|
SWCA Member
|
|
|
Join Date: Jun 2003
Location: San Antonio, TX, USA
Posts: 1,451
Likes: 8
Liked 740 Times in 256 Posts
|
|
I do it becasue I can see the difference on the target in certain calibers with certain guns. For example, with my SIG 210-5, not sorting brass will normally increase the group size about 1 to 2" over sorted brass.
The same hold true with my Les Baer 10mm.
Try it yourself and see if it matters to your gun and your shooting skills.
__________________
SWCA 1646
|
07-17-2011, 09:38 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,465 Times in 6,787 Posts
|
|
Quote:
Originally Posted by Peter M. Eick
I do it becasue I can see the difference on the target in certain calibers with certain guns. For example, with my SIG 210-5, not sorting brass will normally increase the group size about 1 to 2" over sorted brass.
The same hold true with my Les Baer 10mm.
Try it yourself and see if it matters to your gun and your shooting skills.
|
With those two guns you could load them with ball and black powder and shoot 1" groups.
__________________
Still Running Against the Wind
|
07-22-2011, 06:02 PM
|
|
Member
|
|
|
Join Date: Jan 2011
Location: Rocky Top, TN
Posts: 412
Likes: 75
Liked 141 Times in 49 Posts
|
|
I'm going to start sorting my .380 ACP by headstamp. When depriming MRP stamped brass the head of the primer comes off but the primer itself doesn't. Annoying to say the least. 21 rounds out of a box of 50 (or at least what I recovered from the range) did this.
David
|
07-22-2011, 07:42 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,465 Times in 6,787 Posts
|
|
Quote:
Originally Posted by dsbock
I'm going to start sorting my .380 ACP by headstamp. When depriming MRP stamped brass the head of the primer comes off but the primer itself doesn't. Annoying to say the least. 21 rounds out of a box of 50 (or at least what I recovered from the range) did this.
David
|
MRP is another headstamp for Magtech which is part of the CBC group. CBC, Magtech, Men and Sellier and Belliot.. It is excellent ammo and brass.
It's odd that you are having problems with depriming it??
__________________
Still Running Against the Wind
|
07-22-2011, 11:18 PM
|
|
Member
|
|
|
Join Date: Jan 2011
Location: Rocky Top, TN
Posts: 412
Likes: 75
Liked 141 Times in 49 Posts
|
|
Quote:
Originally Posted by Rule3
MRP is another headstamp for Magtech which is part of the CBC group. CBC, Magtech, Men and Sellier and Belliot.. It is excellent ammo and brass.
It's odd that you are having problems with depriming it??
|
I know. None of the other calibers have this issue. Only the .380 ACP. It could be just this batch. I'm keeping my eye on it now.
David
Last edited by dsbock; 07-22-2011 at 11:18 PM.
Reason: Spelling
|
07-22-2011, 11:32 PM
|
Member
|
|
|
Join Date: Jul 2006
Location: Anchorage, Alaska
Posts: 321
Likes: 146
Liked 122 Times in 74 Posts
|
|
I sort mine. I've noticed different case thickness between makers. For example I've found R-P 45 Auto brass is thinner than Federal or W-W.
That works well when using .452" diameter bullets in my 22-4. W-W and Federal cases are so tight that I can't easily push a full moon clip of cartridges into the gun. With R-P they drop right in.
|
07-22-2011, 11:36 PM
|
Member
|
|
|
Join Date: Feb 2007
Location: SW MT
Posts: 6,690
Likes: 10,392
Liked 5,972 Times in 2,942 Posts
|
|
I sort mine and mix what I don't want to keep for resale if there isn't enough of a certain brand.
__________________
Front sight and squeeze
|
07-23-2011, 10:13 AM
|
Member
|
|
|
Join Date: Jun 2005
Location: Laramie, WY
Posts: 100
Likes: 0
Liked 4 Times in 3 Posts
|
|
Quote:
Originally Posted by Smith357
Rifle brass get sorted by head stamp, rifle and usage count. Handgun brass not so much, I only sort it by nickle or not.
|
+1 what Smith357 said.
98% of all my handgun loading is designed to duplicate standard pressure and velocity (not +P, etc.). I have small lots of new factory and once fired brass for hotter .38 loads and .357 Magnum loads.
I use a single stage press and handle each piece of brass multiple times resulting in lots of visual inspection. I toss out any case that shows the slightest split, bulge, wrinkle, etc. Otherwise, it's load and shoot.
__________________
WyoStillhunter
|
07-23-2011, 05:52 PM
|
SWCA Member
|
|
|
Join Date: Jun 2003
Location: San Antonio, TX, USA
Posts: 1,451
Likes: 8
Liked 740 Times in 256 Posts
|
|
If you don't sort them, how do you do final inspections? I handle every round as part of the sorting process and occasionally toss some back for breaking down.
__________________
SWCA 1646
|
07-26-2011, 12:33 AM
|
US Veteran Absent Comrade
|
|
|
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
|
|
For me, sorted is not a plus unless it's all Starline, Federal, whatever. Name brand stuff. Surprisingly, PMC is my favorite headstamp for .45ACP.
I've bought several batches of used .45ACP. As long as there wasn't any steel or aluminum or large amounts of Amerc in it I was happy. I do my own cleaning & sorting. Name brands and "others."
Now that we are seeing so much SPP .45 brass sorting by headstamp is kinda mandatory.
.357 Magnum brass gets sorted to major brand name & "others." Brass I buy used serves as range fodder with .38+P loadings to avoid carbon rings. I like to load my target batches with same headstamps.
For full house Big Dogs I use Starline that I bought new.
Just a hint, I'm almost always in the market for used .357 Magnum brass if the price/trade is right.
Quote:
Originally Posted by Erich
I'm 5/8 German, after all.
|
I'm of German ancestry as well.
ummm... I actually sort 9mm brass...
Last edited by Fishslayer; 07-26-2011 at 12:45 AM.
|
07-26-2011, 04:41 AM
|
|
Moderator SWCA Member Absent Comrade
|
|
|
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
|
|
I always separate my handgun brass by headstamp and even store them in 50 piece trays before loading and after shooting. (I can't help myself, I'm a little OCD about stuff)
Rifle brass gets separated and firings are counted. Handgun brass gets shot until it splits or the primer pockets get too large. BUT, I've been shooting the same 1,200 pieces of Remington .38 Special brass for over 6 years now and haven't had to toss one yet!
__________________
Freedom is never free!!
SWCA #3437
|
07-27-2011, 01:15 AM
|
US Veteran
|
|
|
Join Date: Sep 2010
Location: New Iberia, Louisiana
Posts: 4,588
Likes: 25,427
Liked 3,380 Times in 1,736 Posts
|
|
I sort just about all my rifle and handgun brass. When I first started shooting my springfield armory 45 i did not have much money and since a lot of the shooters did not reload they became my source for extra brass. Was a bad day that I did not come home with at least 2-300 empty cases more than I had left with. So basically all cases regardless of headstamp went into the same bucket.What I did do with the 45 brass was sort it and the oddballs that only amounted to less than 100 cases got put into another bucket. All the speer,rem,ww,federal the big 4 were loaded and shot at steel plate matches. The good stuff like wcc match got saved for a rainy day. And I have to say that shooting mixed headstamped cases showed me that there is little to no difference than that of only one headstamp. We'd fing fiochhi, tzz Israeli, mfs hungarian and a few others like sellier and bellot. The s&b's went into a special box for another rainy day. About the only thing bad with the s&b brass was that it would not accept a large pistol primer easily. Took the deburring tool for doing casenecks and chamfered the opening of the primer pocket. After that no probalems. Frank
|
07-30-2011, 08:12 PM
|
US Veteran Absent Comrade
|
|
|
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
|
|
Quote:
Originally Posted by Frank46
Took the deburring tool for doing casenecks and chamfered the opening of the primer pocket. After that no probalems. Frank
|
I actually bought the tool for reaming primer pockets. I find a lot of crimped 9mm NATO brass, and while I've never had a real problem seating in S&B cases the reamer does make life much easier.
Easy to find the S&B brass. The primer goes "PING!" when ya decap it.
|
08-06-2011, 11:02 AM
|
Member
|
|
|
Join Date: Mar 2009
Location: SW Washingtom
Posts: 155
Likes: 0
Liked 2 Times in 1 Post
|
|
I just drop it all off at dads and let him deal with it.
|
08-06-2011, 11:10 AM
|
|
Member
|
|
|
Join Date: Oct 2008
Location: Denver, CO
Posts: 1,812
Likes: 166
Liked 977 Times in 489 Posts
|
|
LOL Where does your Dad live? I have some that needs attention.
|
08-07-2011, 10:06 AM
|
Member
|
|
|
Join Date: Sep 2001
Posts: 383
Likes: 178
Liked 110 Times in 66 Posts
|
|
Those of you who load for smallish cases like the .380 ACP, may want to weigh the various manufacturers brass cases and see the variation in weight from one brand to another. I did, and the differences were significant. My point is, if they weigh differently, they "probably" or maybe I should say "could" have different internal capacities. That can be an issue with higher end charges of fast powders like Bullseye.
|
08-07-2011, 02:04 PM
|
|
US Veteran
|
|
|
Join Date: Aug 2006
Location: West Central IL
Posts: 22,758
Likes: 18,437
Liked 22,313 Times in 8,245 Posts
|
|
If you are a contender for master class at Camp Perry, you would want to sort brass. If you shoot like the rest of us, no need.
__________________
H Richard
SWCA1967 SWHF244
|
08-07-2011, 02:36 PM
|
US Veteran
|
|
|
Join Date: Nov 2007
Location: Ridgecrest, CA
Posts: 712
Likes: 43
Liked 841 Times in 330 Posts
|
|
I've been sorting all of my brass for a while, although I'm getting lazier about the plinking loads.
I know the OP was talking about pistol rounds, but I wanted to share this week-end's reminder about sorting rifle brass. I was working up a new load for my 7mm RM (I need lead free now that I am in CA). My brass was sorted (or so I thought). When loading the second round at book max I felt a definite crunch as the extruded powder compressed. The previous round at the same charge did not. I took another look and confirmed that the headstamp was different. I had read that the "other" headstamp brass had lower capacity. I think I just confirmed it.
Chubbs
|
08-07-2011, 03:41 PM
|
|
SWCA Member
|
|
|
Join Date: Jun 2000
Location: Massachusetts USA
Posts: 9,575
Likes: 3,695
Liked 8,924 Times in 3,545 Posts
|
|
I sort my brass partially because I feel that the same head stamp brass means that it has the same manufactured characteristics and partially because I am anal and like it that way. Sitting on the couch with a bucket from the range and a dozen or so tupperware containers to pitch it into is a no brainer for me. Mainly I just like things orderly.
__________________
James Redfield
LM #497
|
08-07-2011, 04:06 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Location: Florida
Posts: 6,555
Likes: 3,343
Liked 9,152 Times in 3,432 Posts
|
|
I pick up nearly all my brass for free, don't bother to separate it for reloading, but if I were buying used brass, I think I'd rather buy it separated, even if paying slightly more. But then I pick it up for free, so. . .
|
08-13-2011, 11:28 AM
|
|
US Veteran
|
|
|
Join Date: Sep 2008
Location: NW NJ
Posts: 1,187
Likes: 3,164
Liked 1,098 Times in 332 Posts
|
|
I only reload handgun calibers, 9mm, .38spec., .40S&W, .45acp & I will now need a .45Colt set up for my dillon 550. I am not a compitition shooter, I just enjoy going to the club / range for informal practice.
I have managed to pick up enough brass from the club to fill a 40 gal. garbage can. I sort by caliber using a set of sorting pans designed for the purpose. I no longer sort by headstanp though. For my purposes I found it to be overkill.
I usually find the damaged cases when I and hand feeding my 550. Ocasionaly a bad case might slip through, but I do inspect every loaded round before it goes into the box.
LTC
|
08-13-2011, 11:37 AM
|
Member
|
|
|
Join Date: May 2011
Location: WV
Posts: 789
Likes: 9
Liked 478 Times in 233 Posts
|
|
Looks as if commercial reload sellers don't sort, but I do, then I box 'em up in factory boxes I pick up at the range. There may not be much brass around, but nobody wants the boxes.
|
|
Tags
|
223, 327, 357 magnum, 380, 45acp, bullseye, commercial, crimp, headstamp, hornady, lock, military, primer, rcbs, remington, sig arms, springfield, starline, winchester |
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|