Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 01-06-2012, 06:55 PM
sbeatty1983 sbeatty1983 is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Dec 2011
Location: North Mississippi
Posts: 202
Likes: 16
Liked 34 Times in 22 Posts
Default light 38 special loads

My 586 will be in monday and my wife wants to shoot it with me. Ive loaded some loads for myself already 158gr lead SWC propelled 4 grs of Hodgdon Universal clays. I tested the load in my dad's model 15 and they were fairly light by my standards but i would like to get my wifes loads down a little more. I also have some 148gr wadcutters and some unique, and some blue dot, and bullseye that im kinda iffy about. It was made before hercules became alliant. Anyone got any good powder puff loads with the materials ive listed?
Reply With Quote
  #2  
Old 01-06-2012, 07:34 PM
ChuckS1's Avatar
ChuckS1 ChuckS1 is offline
US Veteran
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: May 2006
Location: Stafford, VA
Posts: 1,560
Likes: 84
Liked 1,441 Times in 526 Posts
Default

2.7 grains of Bullseye and the wadcutters. Light and accurate.
Reply With Quote
  #3  
Old 01-06-2012, 07:48 PM
M3Stuart's Avatar
M3Stuart M3Stuart is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Mar 2011
Location: Northeast Texas
Posts: 2,861
Likes: 921
Liked 1,326 Times in 723 Posts
Default

I load 3.2 to 3.4 gr of hogdon HP-38 with 158 gr LSWC and can shoot them all day. that's what i started my son on and we've yet to find any reason to load any hotter.
__________________
But then, what do I know?
Reply With Quote
  #4  
Old 01-06-2012, 07:51 PM
tops's Avatar
tops tops is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Mar 2009
Location: NC, Yadkin County
Posts: 6,209
Likes: 25,453
Liked 8,521 Times in 3,188 Posts
Default

For new shooters I use 158 gr. SWC and 3.5 grs. of Unique, 577 fps out of a 2 in. barrel.
Reply With Quote
  #5  
Old 01-06-2012, 07:57 PM
M29since14 M29since14 is offline
SWCA Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Jul 2005
Location: Indiana
Posts: 11,907
Likes: 10,039
Liked 10,047 Times in 4,758 Posts
Default

ChuckS1 gives the old standby .38 target load and it is as good as ever - if you are a careful handloader.

In my experience, Bullseye has been very consistent as long as I have been using it - way more so than Unique and #2400. (Don't know all that much about Blue Dot.) I would make a few test loads and try your Bullseye - as long as you can positively identify it and there is no tell-tale rancid odor to it.

I still use some rather old powders that were "before Alliant" and have good results with them. Success in doing that mainly seems to depend on storage. If left in the original container and stored at reasonably steady temperatures around normal room temperature, I have noticed no problems.

If you have any serious doubts, pour it out and burn it up. A can of powder is not worth risking destroying a gun - and maybe hurting someone.
Reply With Quote
  #6  
Old 01-06-2012, 10:10 PM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

I use W231/HP-38 for most of my .38 Special loads. It works well for me...
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
  #7  
Old 01-06-2012, 10:21 PM
TSQUARED TSQUARED is offline
Member
light 38 special loads light 38 special loads  
Join Date: Nov 2004
Location: Michigan, USA
Posts: 2,260
Likes: 2
Liked 114 Times in 84 Posts
Default

Either 2.7 gr. Bullseye with the 148 gr.HBWC or 2.8 gr. Trail Boss with the 158 gr. cast lead bullet.
Reply With Quote
  #8  
Old 01-06-2012, 10:52 PM
27 Man 27 Man is offline
SWCA Member
light 38 special loads light 38 special loads  
Join Date: Aug 2002
Location: Tulsa, Oklahoma
Posts: 1,062
Likes: 2,460
Liked 733 Times in 393 Posts
Default

I have several cans of Bulleye of the Herculese era and have noticed no ill effects. However, it has always been stored in the house in the original containers. 2.7 BE/148 WC in .38 Spl. has been one of my all time favorites.
Reply With Quote
  #9  
Old 01-08-2012, 12:38 PM
hawgleg's Avatar
hawgleg hawgleg is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Dec 2008
Location: arkansas
Posts: 236
Likes: 4
Liked 15 Times in 11 Posts
Default

Bullseye = light accurate loads.
Reply With Quote
  #10  
Old 01-08-2012, 01:41 PM
rsrocket1 rsrocket1 is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Jun 2011
Location: DFW Texas, a free state!
Posts: 755
Likes: 42
Liked 326 Times in 197 Posts
Default

3.0 grains of Bullseye will get you a nice light recoiling load in the mid 600 fps range. The cases may come out sooty because the pressure is very low.

I like Red Dot for light loads because it generates peak pressure quickly and seals off the case and burns completely. 2.8g of Red Dot under a 158g SWC feels a little stronger than a .22 LR and is great for easing someone into a centerfire pistol. Other fast powders good for light loads are Clays, TightGroup and of course Trail Boss which was meant for light loads in black powder cartridges.

With light loads in 38, be careful of double/triple charges, its a big case. That's the other good thing about Trail Boss, it takes up most of the case volume with a single light charge.
Reply With Quote
  #11  
Old 01-08-2012, 07:28 PM
roughedgekid roughedgekid is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Mar 2011
Location: Monroe,NC
Posts: 33
Likes: 1
Liked 1 Time in 1 Post
Default

I load 4.5 grs of unique over a 158 gr swc for my wife and shes dead on with it.
Reply With Quote
  #12  
Old 01-09-2012, 05:18 AM
chief38's Avatar
chief38 chief38 is offline
Member
light 38 special loads  
Join Date: Apr 2006
Posts: 17,759
Likes: 7,835
Liked 25,615 Times in 8,661 Posts
Default

I like 3.1 grains of Titegroup over a 158 grain RNL hard cast bullet. Light, accurate, and does not lead up the gun. Makes for a very light training round.

Chief38
Reply With Quote
  #13  
Old 01-09-2012, 09:01 AM
Steve in Vermont Steve in Vermont is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Jan 2011
Posts: 1,969
Likes: 256
Liked 1,383 Times in 522 Posts
Default

Quote:
Originally Posted by chief38 View Post
I like 3.1 grains of Titegroup over a 158 grain RNL hard cast bullet. Light, accurate, and does not lead up the gun. Makes for a very light training round.

Chief38
Question: In the Hodgdon data they recommend 3.2 - 3.8 gr of TG for a 158 gr LSWC. For W231, 3.1 - 3.7 gr. For HBWC they recommend 2.7 - 3.3 gr TG or 3.5 - 4.0 gr W231. Why the similarity in the 158 gr loads and difference in the two powders with 148 HBWC?
Reply With Quote
  #14  
Old 01-09-2012, 09:32 AM
chief38's Avatar
chief38 chief38 is offline
Member
light 38 special loads  
Join Date: Apr 2006
Posts: 17,759
Likes: 7,835
Liked 25,615 Times in 8,661 Posts
Default

After you reload for some time you will come to the realization that it is NOT an exact science and therefore different manuals will have different reloading data. Each person that did the same science experiment in High School came out with different yields.....remember?

The slight variations are due to:

* different powder manufacture dates, brands of primers and brands of bullets
* how tight or severe your crimp is
* how many times your cases have been loaded
* individual press set ups and idiosyncrasies
* different bullet lubes
* how conservative or brave the reloading manual publisher wants to be
* etc etc.

Chief38
Reply With Quote
  #15  
Old 01-09-2012, 01:03 PM
Steve in Vermont Steve in Vermont is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Jan 2011
Posts: 1,969
Likes: 256
Liked 1,383 Times in 522 Posts
Default

Quote:
Originally Posted by chief38 View Post
After you reload for some time you will come to the realization that it is NOT an exact science and therefore different manuals will have different reloading data. Each person that did the same science experiment in High School came out with different yields.....remember?

Chief38
While I understand what you're saying, for people like me (who like to operate within more defined parameters) it can complicate things. So we will continue to listen and ask questions and hope we come to the "right" decision, arbitrary as that might sometimes be. Thanks Chief.
Reply With Quote
  #16  
Old 01-09-2012, 01:15 PM
hawgleg's Avatar
hawgleg hawgleg is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Dec 2008
Location: arkansas
Posts: 236
Likes: 4
Liked 15 Times in 11 Posts
Default

Quote:
Originally Posted by Steve in Vermont View Post
While I understand what you're saying, for people like me (who like to operate within more defined parameters) it can complicate things. So we will continue to listen and ask questions and hope we come to the "right" decision, arbitrary as that might sometimes be. Thanks Chief.
I think it may have to do with the powder burn rate. Tilegroup burns hotter than W231. Just happen to be close on the 158 gr bullet weight but different on the 148 gr bullet weight. That's a good example of why you can't substitute powders. They may be close on one load but way apart on others.
Reply With Quote
  #17  
Old 01-11-2012, 01:11 AM
lmcgust lmcgust is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Aug 2009
Location: Montreal, Canada
Posts: 124
Likes: 32
Liked 5 Times in 5 Posts
Default

Quote:
Originally Posted by Steve in Vermont View Post
Question: In the Hodgdon data they recommend 3.2 - 3.8 gr of TG for a 158 gr LSWC. For W231, 3.1 - 3.7 gr. For HBWC they recommend 2.7 - 3.3 gr TG or 3.5 - 4.0 gr W231. Why the similarity in the 158 gr loads and difference in the two powders with 148 HBWC?
Steve In Vermont,
My theory to explain your question: the 158gr being the heavier bullet will produce a more aggressive pressure curve due to its inertia than the 148gr. Titegroup being a faster powder than W231, it can reach the required pressure with less of it than the slower W231. I think... :-)

Regards,
Guy -
Reply With Quote
  #18  
Old 01-11-2012, 01:35 AM
robctwo robctwo is offline
Member
 
Join Date: May 2006
Location: Albany, OR
Posts: 458
Likes: 6
Liked 58 Times in 27 Posts
Default

I've been reloading for a few years and about 185,000 rounds. I've been loading a lot of .38 Special this past year or so. I like light accurate loads. I use 125 gr lead round nose and 158 gr lead swc. I like Bullseye. I have a few manuals. I always start with the minimum load listed. Most of these are very comfortable, but maybe not the most accurate. When I'm starting a new load for a particular bullet, powder, or gun, or any combination, I end up with a few different combinations which work for me.

Try the starting loads. They should clear the end of the barrel and have minimal recoil. Safe and light will be a good place to start.

I'm shooting 3.1 Bullseye with the 125 gr at 25 yards with spectacular results out of my 14-3 and 15-2. My 19s, 4 & 6" seem to like 3.4 Bullseye with the 158 gr swc. Both loads are very mild recoil.

I have small hands and prefer the Ahrends retro combat grips. Sometimes the grips make as much difference for felt recoil as the loads.
Reply With Quote
  #19  
Old 01-11-2012, 01:45 AM
lmcgust lmcgust is offline
Member
light 38 special loads light 38 special loads light 38 special loads light 38 special loads light 38 special loads  
Join Date: Aug 2009
Location: Montreal, Canada
Posts: 124
Likes: 32
Liked 5 Times in 5 Posts
Default

...Steve, another thing I noticed in the Hodgdon data you refer to:

for the 148 HBWC, their listed starting speed differs quite a bit: 771 fps for TG and 869 for W231, a difference of 98 fps or 13% in speed.

for their 158gr data, the listed speed for TG is 815 fps versus 782 for W231, or a difference of 4%, much less delta. So it could explain why we see a bigger difference in the case of 148 HBWC.

This explanation is probably better than the one I gave in my previous post

Regards,
Guy -
Reply With Quote
Reply

Tags
586, ahrends, bullseye, crimp, model 15, universal

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
.41 Mag light loads WVfishguy Reloading 58 11-02-2021 03:33 PM
light loads in a 357, 38 vs 357 beagleye Reloading 36 12-26-2020 11:55 AM
Recommendations? Easy 44 Special loads and Quality 22 LR loads dacoontz Ammo 19 05-30-2015 07:13 PM
Powder for .38 special light loads Pequod Reloading 41 04-30-2015 11:22 PM
Light .44 Special loads w Hornady 240 SWCHP? jtcarm Reloading 12 12-09-2012 03:38 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:53 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)