Quote:
Originally Posted by rsrocket1
The only problem you might come across is that sometimes a die needs to be screwed into the bushing so low that there isn't enough thread to make the lock ring fit. All you need to do is to flip it over and it will tighten down just fine without the need of the O-ring. A Hornady lock ring will also work but I found that there is no need to buy one of those.
I put the Lee expander in a separate station (actually in station 3 after the powder drop and just before the seating station.
|
What rsrocket said... Also agree with Mr. Apathy on the Hornady expander issue. I found their caliber-specific expanders to be useless. I got a unit from powder funnels.com. It's a universal expander, and works pretty good, best solution I could find for powder through with the Hornady.
I still think that the Lee powder through expander is great, very good set up. I actually still use the Lee powder measure/PTX with a couple of calibers on my LnL, because it just works so well...
Overall, you should have no problems with Lee dies in your LnL, they work great mine...