Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 03-04-2012, 12:42 PM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default How long do you tumble brass?

Yea I know till it gets clean. I was watching a video on the tube and they ran their tumbler for twenty minutes. They put some Blue Magic polish in there to help it along. I polish mine for two or three hours to get it clean. I am using Lyman corn cob media with a little Nu Finish car wax. I still have a little stain on some of the brass but that is OK just so it's clean. The Lyman seems to last for ever. I have cleaned over 2000 rounds of 45 brass this week and it's still going strong. The last media I threw out was so old I was ashamed to use it. So how long do you let your tumbler run? Don
__________________
"Don't worry be happy"
Reply With Quote
  #2  
Old 03-04-2012, 12:45 PM
snowman snowman is offline
Member
How long do you tumble brass?  
Join Date: Jan 2003
Location: Rural NW Ohio
Posts: 3,387
Likes: 5,180
Liked 2,444 Times in 1,097 Posts
Default

When I do things right(which I didn't this last time), it takes 4-5 hours to get them the way I like them.

Andy
Reply With Quote
The Following User Likes This Post:
  #3  
Old 03-04-2012, 12:46 PM
gmiller0737 gmiller0737 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Nov 2010
Location: Jacksonville,Florida
Posts: 853
Likes: 1,064
Liked 471 Times in 284 Posts
Default

Average about 2 hours I usualy check it after about a hour to see if it's clean.
Reply With Quote
  #4  
Old 03-04-2012, 12:48 PM
Bumper Bumper is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2012
Location: Arizona
Posts: 18
Likes: 1
Liked 3 Times in 3 Posts
Default

1 to 1 1/2 hrs. Just turn it on and go do something else, so depending on what that something else is, the time varies. Corn cob media, with a splash of Dillon polish. Mostly .45acp and .44 brass. Can't see how the brass could be any cleaner.
Reply With Quote
  #5  
Old 03-04-2012, 12:53 PM
OKFC05 OKFC05 is offline
Member
How long do you tumble brass? How long do you tumble brass?  
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,158
Likes: 3,605
Liked 5,199 Times in 2,172 Posts
Default

Depends on the brass and media. If it's cleaning, walnut is quite a bit faster than corncob. I use walnut with a bit of polish added and run until dry.

If I just shot and picked up nickel cartridges from the range, 10 minutes is fine.
If I just shot and picked up brass cases, maybe half hour or however long it takes me to eat lunch.
If it is range trash brass that is stained and discolored, maybe a couple of hours.

As far as finish polishing brass until it shines like a mirror (4 hours in corncob) I just don't bother anymore.
__________________
Science plus Art
Reply With Quote
The Following User Likes This Post:
  #6  
Old 03-04-2012, 01:11 PM
hawgleg's Avatar
hawgleg hawgleg is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Dec 2008
Location: arkansas
Posts: 236
Likes: 4
Liked 15 Times in 11 Posts
Default

At least a hour but mostly just when I remember to turn it off.
Reply With Quote
  #7  
Old 03-04-2012, 01:25 PM
DGT's Avatar
DGT DGT is offline
SWCA Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jan 2008
Location: Oklahoma
Posts: 2,574
Likes: 8,270
Liked 2,071 Times in 590 Posts
Default

Two to three hours. I don't mind letting it run longer if I'm busy doing something else but I set two to three hours as a minimum.
Reply With Quote
  #8  
Old 03-04-2012, 03:06 PM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

For me it seems the more times brass gets shot the longer it takes to clean. Can get clean brass in as little as 2 hours but sometimes it takes 6 hours. BTW, adding wax to the media will make it shine but it does not aid in cleaning the brass.

So, even though it's not exactly what you want to hear, as long as it takes...
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
  #9  
Old 03-04-2012, 03:23 PM
socal s&w socal s&w is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Mar 2007
Location: San Diego, CA
Posts: 754
Likes: 1
Liked 129 Times in 58 Posts
Default

Two hours in a stainless steel pin Thumbler's tumbler and all my brass is not only clean, but shiny too! It's a wet method and not for everyone, but I like it a lot versus the dry dusty method. Just have to think ahead a little bit if you don't have a means of drying it quickly.

Stainless Steel Reloading Supplies | Tumblers, Seperators, Media & More!
Reply With Quote
  #10  
Old 03-04-2012, 04:33 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,466 Times in 6,788 Posts
Default

2 hours. Lyman Turbo 1200. Set on a timer. 50:50 corn and walnut with a squirt of any kind of cleaner.
I do change my media often. 40 lb bags of corn and walnut.
__________________
Still Running Against the Wind
Reply With Quote
  #11  
Old 03-04-2012, 04:39 PM
kennyb's Avatar
kennyb kennyb is offline
SWCA Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Dec 2008
Posts: 6,895
Likes: 736
Liked 1,208 Times in 737 Posts
Default

3 hours here
__________________
SWCA#2208
KK4EMO
Reply With Quote
  #12  
Old 03-04-2012, 06:19 PM
Titegroups Titegroups is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2010
Location: Florida
Posts: 1,338
Likes: 65
Liked 247 Times in 166 Posts
Default

Mine 45 mins in coarse corn cob.
Reply With Quote
The Following User Likes This Post:
  #13  
Old 03-04-2012, 06:24 PM
Alk8944's Avatar
Alk8944 Alk8944 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,616
Likes: 1,554
Liked 8,612 Times in 3,452 Posts
Default

Use a Lyman 1200 that is about 35 years old and has run long enough that it had polished the inside of the bowl like a mirror years ago.

Use Walnut shell, rarely any additives. Dampen with a little Isopropyl Alcohol to keep dust and static down. Start it at night and turn off in the morning if I remember, otherwise when I get home from work. So, 6-18 hours. If I didn't want it bright I wouldn't polish brass at all, just like we used to do.

Often, just to remove case lube when needed, is Corn cob for a couple of hours. Still use a little alcohol or Trichloroethane to help de-grease.

One question I had from what was posted is what possible reason would anyone have for mixing Walnut and Corn? They have different purposes.
__________________
Gunsmithing since 1961
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 03-04-2012, 06:24 PM
KLNC's Avatar
KLNC KLNC is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Mar 2011
Location: North Carolina
Posts: 172
Likes: 8
Liked 70 Times in 24 Posts
Default

I have my tumbler set on a digital timer for two hours. Just push the button and forget it. Corn cob media and a bit of polish and they come out clean and shiny.
Reply With Quote
  #15  
Old 03-04-2012, 08:08 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,466 Times in 6,788 Posts
Question

Quote:
Originally Posted by Alk8944 View Post
One question I had from what was posted is what possible reason would anyone have for mixing Walnut and Corn? They have different purposes.
What are they??

They are both listed as cleaning media. Perhaps Corn shines better and Walnut cleans better. Best of both worlds? But I use polish also.
__________________
Still Running Against the Wind
Reply With Quote
  #16  
Old 03-04-2012, 10:16 PM
GTbob GTbob is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Dec 2010
Location: Littleton, Colorado
Posts: 238
Likes: 18
Liked 9 Times in 8 Posts
Default

I run mine for 4 hours with a shot of Nu Finish car polish. I have an outdoor light timer I bought at WalMart that I use, that way I can start the tumbler and forget it.
__________________
SW40VE AF
2000 rounds so far
Reply With Quote
  #17  
Old 03-04-2012, 11:07 PM
max's Avatar
max max is online now
US Veteran
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Mar 2001
Location: illinois
Posts: 6,294
Likes: 1,849
Liked 6,681 Times in 2,115 Posts
Default

I have often said that the tumbler is like a crock pot not a microwave. I often run mine for 10-12 hours.
Reply With Quote
  #18  
Old 03-05-2012, 01:42 AM
Nemo288's Avatar
Nemo288 Nemo288 is online now
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jan 2011
Location: Badgerland
Posts: 2,371
Likes: 557
Liked 1,496 Times in 786 Posts
Default

I was getting tired of how long the corn cob was taking so I added
some walnut. Shazam! the combo works. When it's worn out
I will go back to straight walnut but the combo cleans mirror
bright in about an hour or 2. I never keep close track.

...Nemo...
Reply With Quote
  #19  
Old 03-05-2012, 02:47 AM
Snapping Twig's Avatar
Snapping Twig Snapping Twig is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: May 2007
Location: S.F. Bay Area
Posts: 3,504
Likes: 527
Liked 3,813 Times in 1,243 Posts
Default

I use a 50/50 combo of corn cob and walnut with a splash of Dillon case shine.

Takes me @ 45 minutes to an hour, or just about the time my guns are clean and it's good to go.
Reply With Quote
  #20  
Old 03-05-2012, 03:18 AM
mtime7's Avatar
mtime7 mtime7 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Sep 2010
Location: El Paso, TX
Posts: 392
Likes: 7
Liked 25 Times in 13 Posts
Default

I run mine for about 15 min, before I size them in 50/50, then after sizing I run about 30 min. but mine don't haft to be pretty just functional
Reply With Quote
  #21  
Old 03-05-2012, 04:17 AM
Frank46 Frank46 is offline
US Veteran
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Sep 2010
Location: New Iberia, Louisiana
Posts: 4,588
Likes: 25,427
Liked 3,380 Times in 1,736 Posts
Default

I used to get quite a bit of range brass. Some of it was really dirty. Soaked in mineral spirits then acetone to get rid of the mineral spirits. Then tumble. I always tumble my brass cause its easier to check for split necks, that sort of thing. I find that once the brass has a good shine then the next trip through the tumbler is usually less time. Basically just cleaning off the powder fouling. I clean my primer pockets with a cordless drill in batches. This way don't get the crud from the primer pockets in the tumbling media. I also prime all my cases before using the dillon. Just insert case, charge, insert bullet,and seat. then it plops into one of the bins. I think anything you do to the case prior to actual reloading leaves you able to load more rounds at a faster rate. I weigh every tenth charge as a check. Frank
Reply With Quote
  #22  
Old 03-05-2012, 08:52 AM
Mule88's Avatar
Mule88 Mule88 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jul 2004
Location: Vandalia, Ohio
Posts: 1,751
Likes: 297
Liked 231 Times in 137 Posts
Default

Most the time I turn it on in the morning and turn it off at bed time, nice and shiny.
Reply With Quote
  #23  
Old 03-05-2012, 11:10 PM
jnyav8r's Avatar
jnyav8r jnyav8r is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Apr 2011
Location: Mass
Posts: 55
Likes: 9
Liked 2 Times in 2 Posts
Default

What about the corcob bedding you get at wally world?? I got some tonight,5lbs for $3.95. I haven't run it yet,but was going to put some cleaner in there also. Suggestions??
Reply With Quote
  #24  
Old 03-05-2012, 11:29 PM
nossew's Avatar
nossew nossew is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jun 2011
Location: MI
Posts: 191
Likes: 114
Liked 84 Times in 43 Posts
Default

I let mine run over-night with some NuFinish
__________________
Be obscure, clearly.
Reply With Quote
  #25  
Old 03-06-2012, 12:44 AM
johngalt's Avatar
johngalt johngalt is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2007
Location: St. Paul (smokey!) MN
Posts: 5,335
Likes: 1,443
Liked 6,647 Times in 2,564 Posts
Default

I started out running it for 3-4 hours, then 2 and noticed no difference. I'm now down to 1. I add a dash of mineral spirits, let it run for a few minutes, throw in the brass and run for an hour. Gets it clean enough.
Reply With Quote
  #26  
Old 03-06-2012, 07:04 AM
blujax01's Avatar
blujax01 blujax01 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Aug 2010
Location: C-Bus
Posts: 6,335
Likes: 4,311
Liked 4,916 Times in 2,086 Posts
Default

Two hours unless I fall asleep on the couch.

Then it's longer ...
Reply With Quote
  #27  
Old 03-06-2012, 09:17 AM
Jc85's Avatar
Jc85 Jc85 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2011
Location: Green, Ohio
Posts: 222
Likes: 1
Liked 2 Times in 2 Posts
Default

I used to let it run all day using corn cob and frank-ford polish. My casings were clean but looked to be a tad tarnished. Not shiny new looking brass but sort of dull.. Now I use walnut and do it for about 90 minutes.. SHINY! I found my self exclaiming SHINY BRASS! every time I pulled a handful out of the tumbler. my wife thought it was funny, I heard her upstairs through the vent saying "SHINY BRASS!
__________________
sw9ve, 24/7 pro Ds, Hs M4
Reply With Quote
  #28  
Old 03-06-2012, 10:06 AM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default

Quote:
Originally Posted by jnyav8r View Post
What about the corcob bedding you get at wally world?? I got some tonight,5lbs for $3.95. I haven't run it yet,but was going to put some cleaner in there also. Suggestions??
I haven't tried that. Be sure and let us know how it does. I have read on the net that a lot of folks are using lizard litter that you get at the big pet stores. It's finely ground up walnut shells and is cheaper than what you buy for guns. Don
__________________
"Don't worry be happy"
Reply With Quote
  #29  
Old 03-06-2012, 10:29 AM
Rule3's Avatar
Rule3 Rule3 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,466 Times in 6,788 Posts
Default

The corn cob bedding used for pets is usually the big coarse stuff. It does not work.

The Lizard Walnut fine stuff is OK but expensive, Got to Harbor Freight or order it online.

This place is great. Buy it once, set for life

Pneumatic Blasting Media - Finishing Supplies - Machining
__________________
Still Running Against the Wind
Reply With Quote
  #30  
Old 03-06-2012, 10:40 AM
folkenheath folkenheath is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Oct 2008
Location: Midwest
Posts: 88
Likes: 0
Liked 5 Times in 3 Posts
Default

Quote:
Originally Posted by jnyav8r View Post
What about the corcob bedding you get at wally world?? I got some tonight,5lbs for $3.95. I haven't run it yet,but was going to put some cleaner in there also. Suggestions??
I use that on all my pistol brass, works great, with a dab of Flitz polish they are shiny as new. I've used on it everthing from .357 to .460 mag and many in between (.40 S&W, .45 Colt, .44 Mag, etc), and it works great.

I would not use it on rifle cartidges though, I used it once on .223 and the necked cases would get all the media inside of them as the tumbler ran, but it would not just dump out because it was too large, it took me well over an hour just to pick the media out of 200 cases.
Reply With Quote
  #31  
Old 03-06-2012, 11:05 AM
Nick B Nick B is offline
US Veteran
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jun 2005
Location: S.W. Fl.
Posts: 1,578
Likes: 677
Liked 1,159 Times in 448 Posts
Default

Quote:
Originally Posted by Rule3 View Post
The corn cob bedding used for pets is usually the big coarse stuff. It does not work.

The Lizard Walnut fine stuff is OK but expensive, Got to Harbor Freight or order it online.

This place is great. Buy it once, set for life

Pneumatic Blasting Media - Finishing Supplies - Machining
Which grit do you recommend for tumbling ?
Reply With Quote
  #32  
Old 03-06-2012, 11:38 AM
Eagl1's Avatar
Eagl1 Eagl1 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Mar 2010
Location: Gig Harbor, WA
Posts: 122
Likes: 0
Liked 21 Times in 6 Posts
Default

Quote:
Originally Posted by Rule3 View Post
The corn cob bedding used for pets is usually the big coarse stuff. It does not work.

The Lizard Walnut fine stuff is OK but expensive, Got to Harbor Freight or order it online.

This place is great. Buy it once, set for life

Pneumatic Blasting Media - Finishing Supplies - Machining

I agree, all the corn cob bedding I've seen in the pet stores is too coarse. I just bought some Econoline Corn Cob Blast Media from Grainger and the size is perfect. It's the best deal I found, $34 for 40 pounds. You will want the 14/20 grit. Grainger Item # 2MVR4.
Here's a link:
Blast Media, 40 Lbs, Corn Cob, 14/20 Grit - Pneumatic Blasting Media - Finishing Supplies - 2MVR4 : Grainger Industrial Supply

Last edited by Eagl1; 03-06-2012 at 11:39 AM. Reason: added link
Reply With Quote
The Following User Likes This Post:
  #33  
Old 03-06-2012, 11:46 AM
blujax01's Avatar
blujax01 blujax01 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Aug 2010
Location: C-Bus
Posts: 6,335
Likes: 4,311
Liked 4,916 Times in 2,086 Posts
Default

I use Lyman Tufnut. Rouge impregnated walnut. I have not noticed any red colored residue in the cases but they seem to be slightly lubed, which I look at as a good thing.
It cost $10 for a 3 lb box and after 18 months and somewhere close to 10K rounds, I still have half a box left.
Reply With Quote
  #34  
Old 03-06-2012, 11:48 AM
buckshotshorty's Avatar
buckshotshorty buckshotshorty is offline
Member
 
Join Date: Jul 2009
Posts: 379
Likes: 86
Liked 298 Times in 132 Posts
Default

Quote:
Originally Posted by Rule3 View Post
2 hours. Lyman Turbo 1200. Set on a timer. 50:50 corn and walnut with a squirt of any kind of cleaner.
I do change my media often. 40 lb bags of corn and walnut.

This is my set up and method exactly.
Reply With Quote
  #35  
Old 03-06-2012, 12:30 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,466 Times in 6,788 Posts
Default

Quote:
Originally Posted by Nick B View Post
Which grit do you recommend for tumbling ?
I bought the 20/40 grit. I do not think it makes a lot of difference. Look at the size and microns, there is not that much difference. The product is the same brand as Grainger. When I ordered it, I had it at my door in a few days. I think is drop ships from Grainger.

It's so cheap, a 40lb bag is a LOT
__________________
Still Running Against the Wind
Reply With Quote
  #36  
Old 03-06-2012, 10:38 PM
nody nody is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jun 2011
Location: Dallas, TX
Posts: 23
Likes: 0
Liked 2 Times in 2 Posts
Default

One thing no one but one guy mentioned was primer pockets.

Are your pockets getting cleaned enough with tumbling to not need the pockets manually cleaned? From what I have read, this is where the Stainless steel media really "shines."
Reply With Quote
  #37  
Old 03-06-2012, 11:42 PM
tlen's Avatar
tlen tlen is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Oct 2003
Location: Kansas
Posts: 214
Likes: 3
Liked 9 Times in 7 Posts
Default

60-90 minutes. Just enough to get the dirt off.
Reply With Quote
  #38  
Old 03-07-2012, 04:04 AM
Fishslayer Fishslayer is offline
US Veteran
Absent Comrade
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
Default

Quote:
Originally Posted by Rule3 View Post
What are they??

They are both listed as cleaning media. Perhaps Corn shines better and Walnut cleans better. Best of both worlds? But I use polish also.
Yes. Walnut cleans better/faster & cob for a bright polish.

The walnut will kind of defeat the purpose of the corn. I actually tried it when I accidently dumped the walnut out of the tumbler into the corn bucket.

I tried it and it came out no different than straight walnut.

Now I only use walnut & Nu Finish to clean (faster) and cob with Nu Finish for an hour or so on the finished ammo for that blazing shine.
Reply With Quote
  #39  
Old 03-07-2012, 06:30 AM
blujax01's Avatar
blujax01 blujax01 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Aug 2010
Location: C-Bus
Posts: 6,335
Likes: 4,311
Liked 4,916 Times in 2,086 Posts
Default

Quote:
Originally Posted by nody View Post
One thing no one but one guy mentioned was primer pockets.

Are your pockets getting cleaned enough with tumbling to not need the pockets manually cleaned? From what I have read, this is where the Stainless steel media really "shines."
I clean before I de-prime, but then again I'm only loading handguns
Reply With Quote
  #40  
Old 03-07-2012, 11:34 AM
Rule3's Avatar
Rule3 Rule3 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,466 Times in 6,788 Posts
Default

Quote:
Originally Posted by nody View Post
One thing no one but one guy mentioned was primer pockets.

Are your pockets getting cleaned enough with tumbling to not need the pockets manually cleaned? From what I have read, this is where the Stainless steel media really "shines."
Primer pockets? People actually clean those??

I sat in front of the TV once and cleaned 100, .223 Rem primer pockets over a clear plastic bowl. The amount of "stuff" was insignificant, miniscule to me. Did not seem worth the effort. I suppose benchrest shooters might do it. I have never cleaned a handgun pocket.
__________________
Still Running Against the Wind
Reply With Quote
  #41  
Old 03-07-2012, 11:49 AM
TSQUARED TSQUARED is offline
Member
How long do you tumble brass? How long do you tumble brass?  
Join Date: Nov 2004
Location: Michigan, USA
Posts: 2,260
Likes: 2
Liked 114 Times in 84 Posts
Default

I use Midway's Frankford Arsenal brank vibratory tumbler for ca 15 to 30 minutes with ground corn cob media. It removes the powder residue and grime but does not make the cases bright and shinny.
Reply With Quote
  #42  
Old 03-07-2012, 12:19 PM
parabarbarian parabarbarian is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Sep 2010
Location: Southern California
Posts: 299
Likes: 12
Liked 34 Times in 26 Posts
Default

Quote:
Originally Posted by nody View Post
One thing no one but one guy mentioned was primer pockets.

Are your pockets getting cleaned enough with tumbling to not need the pockets manually cleaned? From what I have read, this is where the Stainless steel media really "shines."
I decap my cases and degrease in an ultrasonic cleaner before tossing then in the tumbler. I use a citrus degreaser and rinse thoroughly. This does not completely clean the primer pockets or inside of the cases but it does remove a lot of the crud.

I lay the the cases out on a cookie sheet to dry then tumble for one to two hours in corncob with some Dillon polish. As long as I don't try to overload either device, the cases are mostly clean on the inside and look good on the outside.
Reply With Quote
  #43  
Old 05-21-2013, 04:53 PM
bamacisa bamacisa is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Nov 2007
Location: Birmingham, Alabama
Posts: 339
Likes: 79
Liked 152 Times in 78 Posts
Default

Try using Nufinish with a little mineral spirits added. It will surprise you how good the cases will become. This works way better than just plain Nufinish alone.
Reply With Quote
  #44  
Old 05-21-2013, 05:05 PM
sophie's Avatar
sophie sophie is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Sep 2011
Location: Texas Panhandle
Posts: 7,181
Likes: 5,550
Liked 3,392 Times in 1,706 Posts
Default

I tumble my brass for about 1-1/2 to 2 hours usually till they look like I want them to. I use a 33 year old Thumlers Tumbler and a little Nu Finish with the crushed walnut media and it does a good job. It does a better job than my friends vibrating case cleaner with the same Nu Finish added.
__________________
James
On the Llano Estacado
Reply With Quote
  #45  
Old 05-21-2013, 08:27 PM
tlay's Avatar
tlay tlay is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Oct 2007
Location: Northern Indiana
Posts: 2,937
Likes: 1,594
Liked 1,977 Times in 732 Posts
Default

I use a Lyman ultrasonic cleaner. 15 mins. and they are good to go.
__________________
Tom
NRA Pistol Inst
Reply With Quote
The Following User Likes This Post:
  #46  
Old 05-21-2013, 08:32 PM
Nframecollector Nframecollector is offline
Banned
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Apr 2013
Location: South Texas
Posts: 1,285
Likes: 638
Liked 461 Times in 270 Posts
Default

Until it gets shiny.
Reply With Quote
  #47  
Old 05-22-2013, 10:33 AM
webfarmer's Avatar
webfarmer webfarmer is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Apr 2013
Location: Michigan
Posts: 491
Likes: 271
Liked 146 Times in 105 Posts
Default

Wow - I let mine tumble overnight in my 30+ year old Thumler's Tumbler. They're plenty clean at that point! Guess I need to look at one of those vibratory cleaners......
Reply With Quote
  #48  
Old 05-22-2013, 10:47 AM
Jayhawkhuntclub's Avatar
Jayhawkhuntclub Jayhawkhuntclub is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Oct 2011
Posts: 740
Likes: 209
Liked 318 Times in 184 Posts
Default

Until it's shiney. That's usually about 2 hours. I don't know why anyone would go much longer. I can't imagine it getting much cleaner after another 10 hours.
Reply With Quote
  #49  
Old 05-22-2013, 12:05 PM
SMSgt's Avatar
SMSgt SMSgt is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Jul 2010
Location: Florida
Posts: 6,556
Likes: 3,344
Liked 9,153 Times in 3,432 Posts
Default

Until it's clean or until I remember I left the tumbler running yesterday!
Reply With Quote
The Following User Likes This Post:
  #50  
Old 05-22-2013, 12:05 PM
carl3989's Avatar
carl3989 carl3989 is offline
Member
How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass? How long do you tumble brass?  
Join Date: Mar 2011
Location: Hebron,N.Y.
Posts: 398
Likes: 207
Liked 157 Times in 52 Posts
Default

For about 3 hours in Thumbler Tumbler with hot water and ceramic media and media detergent. The brass comes out as new and very shiny.
Reply With Quote
Reply

Tags
223, 45acp, colt, fouling, primer, smith & wesson, smith and wesson, walnut

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: .32 S&W Long Brass Jeff423 WANTED to Buy 1 12-19-2013 09:55 PM
WTS: .32 S&W Long Brass, .38 Special Brass **SPF** PMRet Accessories/Misc - For Sale or Trade 1 12-15-2012 03:28 PM
Wtb 32 s&w long brass Rockets WANTED to Buy 3 05-11-2012 09:08 PM
WTS: Brass, .32 S&W Long and 9mm **SPF** PMRet Accessories/Misc - For Sale or Trade 3 10-26-2010 04:51 PM
WTS: 32 S&W Long Brass (NC) yankee2500 Accessories/Misc - For Sale or Trade 1 03-24-2009 08:06 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:32 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)