Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 03-05-2012, 12:15 AM
Argonnakid's Avatar
Argonnakid Argonnakid is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Mar 2011
Location: Virginia Beach,VA
Posts: 460
Likes: 85
Liked 126 Times in 92 Posts
Default Fast and easy way to lube rifle cases

So, as I sit here preparing .223 cases for loading, I'm thinking there has to be a faster way to lube the inside of the neck. I just can't think of it. Been using cotton swaps for awhile now and it is time consuming. Anyone have a better/different method
__________________
15T,15-22,5946 & some not S&W
Reply With Quote
  #2  
Old 03-05-2012, 12:33 AM
Gamer's Avatar
Gamer Gamer is offline
Member
Fast and easy way to lube rifle cases  
Join Date: Jul 2008
Location: Upstate SC
Posts: 205
Likes: 104
Liked 65 Times in 32 Posts
Default

I don't think what I'm about to type has any bearing at all on your question, but I watched a video of a guy spraying a couple of blasts of one shot into a ziplock bag and shaking it to lube cases. I have since tried it and it worked great on pistol brass. Anyway, hopefully someone will chime in later.
Reply With Quote
  #3  
Old 03-05-2012, 12:46 AM
Sebago Son's Avatar
Sebago Son Sebago Son is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Jul 2002
Location: Sebago Lake, Maine, USA
Posts: 5,435
Likes: 6,726
Liked 6,724 Times in 1,862 Posts
Default

Use a stiff .223 bore brush. You don't have to daub like would with a Q-tip.
Reply With Quote
  #4  
Old 03-05-2012, 12:52 AM
venomballistics's Avatar
venomballistics venomballistics is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Aug 2007
Location: between beers
Posts: 8,873
Likes: 4,772
Liked 6,925 Times in 3,301 Posts
Default

lay out the cases in a row with the mouths facing you make a pass with a can of one shot so that the angle of the spray gets some in the neck .. sweep your hand across them to roll em dry side up and spray another quick pass.
you need not bee too meticulous in your lube operation. That what gets into the die will take care of the missed dry sided cases
__________________
it just needs more voltage
Reply With Quote
The Following User Likes This Post:
  #5  
Old 03-05-2012, 01:26 AM
lebomm lebomm is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Dec 2008
Location: Seattle
Posts: 1,948
Likes: 38
Liked 821 Times in 490 Posts
Default

I use an oversize bore mop with a few drops of fine oil (gun oil, sewing machine oil, kerosene, ATF, etc.) applied. It lasts a long time, several hundred cases, before needing a drop to replenish, and one stroke in & out is all it takes to prevent a squeak at neck expand.

Larry
Reply With Quote
  #6  
Old 03-05-2012, 02:59 AM
Argonnakid's Avatar
Argonnakid Argonnakid is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Mar 2011
Location: Virginia Beach,VA
Posts: 460
Likes: 85
Liked 126 Times in 92 Posts
Default

Thank you all for the useful information, tried the bore mop method, much faster and my wife will be sending thank you cards for saving her q-tip's
__________________
15T,15-22,5946 & some not S&W
Reply With Quote
  #7  
Old 03-05-2012, 09:02 AM
FTG-05 FTG-05 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Feb 2011
Location: TN
Posts: 459
Likes: 62
Liked 150 Times in 78 Posts
Default

Aluminum baking pan from any store - about $3 or less.

A couple sheets of paper towels on the bottom - pennies.

A spray bottle of Dillon spray case lube - $9.

Dump the tumbled and cleaned cases into the pan on top of the paper towels. It should only be a couple cases deep, an inch or so. Spray the cases and wait a moment, then lightly tumble the pan to move the cases around a bit. Wait a couple minutes, then spray again, lightly tumble them again.

Start reloading. Should make the cases move through the resizing die like butter.

You can make your own Dillon case lube with some lanolin and 99% alcohol, there's several on-line instructions available, it's not hard.

I've been using Dillon spray case lube for rifle cases for decades, it works.

Good luck.
Reply With Quote
  #8  
Old 03-05-2012, 12:28 PM
TheTinMan TheTinMan is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Apr 2009
Location: Sorta Downeast
Posts: 933
Likes: 2,866
Liked 1,735 Times in 417 Posts
Default

Imperial Dry Neck Lube - don't forget to buy the little tub of "application media" too:
Imperial Lubricants | Redding Reloading Equipment: reloading equipment for rifles, handguns, pistols, revolvers and SAECO bullet casting equipment

It's dry, so no powder globbing up in the case mouth. Also, it's evenly distributed all around the inside of the case neck. Spray lube won't do that IME.

FWIW Imperial Sizing Wax works like a champ too - just don't use too much. I dab a finger in the wax every 2-4 cases and rub around the neck & shoulder every case. When you're done sizing, just lay the cases lengthwise in a row on a towel, fold it over the cases, and roll them clean.
Reply With Quote
  #9  
Old 03-05-2012, 03:01 PM
Forrest r Forrest r is offline
Member
 
Join Date: Feb 2007
Location: Ohio
Posts: 1,455
Likes: 170
Liked 1,636 Times in 681 Posts
Talking

I use powdered graphite, it doesn’t get any easier. I bought a tube (1#) of it years ago & have used it ever since.

I simply stick the end (mouth) of the case (neck area only/stop where the case shoulder begins) in the tub of graphite & give it a quick twist. Then I pull the case out, give it a tap on the side of the tub & give the case neck a wipe with a dry cloth to take the graphite off the outside of the case. Simple, it only takes a couple seconds to lube the inside of a case/case neck.

Reply With Quote
The Following User Likes This Post:
  #10  
Old 03-05-2012, 03:06 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

This looks pretty cool and easy. Of course I would knock it over and spill it.

Imperial Application Media - Sinclair Intl

I use this but mix my own liquid water based lube rather than the mica.

Lyman Case Neck Dipper - Sinclair Intl
__________________
Still Running Against the Wind
Reply With Quote
  #11  
Old 03-05-2012, 03:08 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by Forrest r View Post
I use powdered graphite, it doesn’t get any easier. I bought a tube (1#) of it years ago & have used it ever since.

I simply stick the end (mouth) of the case (neck area only/stop where the case shoulder begins) in the tub of graphite & give it a quick twist. Then I pull the case out, give it a tap on the side of the tub & give the case neck a wipe with a dry cloth to take the graphite off the outside of the case. Simple, it only takes a couple seconds to lube the inside of a case/case neck.

OK, where do you get it??
__________________
Still Running Against the Wind
Reply With Quote
  #12  
Old 03-05-2012, 03:31 PM
trauma1 trauma1 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Dec 2011
Location: central florida
Posts: 337
Likes: 3
Liked 84 Times in 42 Posts
Default

Lee liquid lube. water it down a bit, toss around in a ziploc bag, lay in sun to dry, reload away.
Reply With Quote
  #13  
Old 03-05-2012, 04:28 PM
rustysixgun rustysixgun is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Dec 2011
Location: Northern California
Posts: 23
Likes: 9
Liked 3 Times in 3 Posts
Default Carbide Expander Plug

I think there are carbide expanders available from Hornaday and other mfgrs. One of those would negate needing any case neck lube.
Reply With Quote
  #14  
Old 03-05-2012, 04:57 PM
trauma1 trauma1 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Dec 2011
Location: central florida
Posts: 337
Likes: 3
Liked 84 Times in 42 Posts
Default

Quote:
Originally Posted by rustysixgun View Post
I think there are carbide expanders available from Hornaday and other mfgrs. One of those would negate needing any case neck lube.
over $100 just for the die and they still say you have to lube some, per the web site. Have not tried one though.
Reply With Quote
  #15  
Old 03-05-2012, 06:16 PM
mkk41 mkk41 is offline
Banned
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Aug 2004
Location: South East , PA . USA
Posts: 5,027
Likes: 485
Liked 1,610 Times in 884 Posts
Default

I stand my cases up and give 'em a spritz from above at about a 45 degree angle. Some gets in the neck.

Carbide expander buttons work great too.
Reply With Quote
  #16  
Old 03-05-2012, 06:35 PM
Forrest r Forrest r is offline
Member
 
Join Date: Feb 2007
Location: Ohio
Posts: 1,455
Likes: 170
Liked 1,636 Times in 681 Posts
Default

I bought that at a local parts outlet for farm/tractors. Do a search on e-bay, it normally sells for $15 a # or $40 for 5#.
A pound of it will lasts for years, I also use it to make a graphite lube for a couple of different bullets.
Reply With Quote
  #17  
Old 03-05-2012, 07:03 PM
jepp2 jepp2 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Feb 2010
Location: Rocky Mtns, CO
Posts: 986
Likes: 19
Liked 214 Times in 141 Posts
Default

Quote:
over $100 just for the die and they still say you have to lube some, per the web site. Have not tried one though.
We are talking apples and oranges. Redding has a carbide expander available for their dies for $28 carbide size button kit.

Lyman makes one for $25 Lyman carbide expander.

And someone makes one for the RCBS sizing dies.

Not only will the carbide expander allow you to size without having to lube the inside of the neck, it will reduce how much your die pulls the neck off center.
Reply With Quote
  #18  
Old 03-05-2012, 07:07 PM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default

I am in a "BIG" learning curve on rifle reloading and was watching a video on how to lube rifle cases. This guy used synthetic motor oil. He poured some in a small container then put the case mouth in it. He then put the case in the shell holder on his press and lightly rubbed his fingers down the side of the case. He said he only lubed one case out of ten. I think you have to tumble them again to get the lube off. I might give that a try. I have found out that there is a lot of ways to lube cases and a lot of them are good. Don

PS I like the graphite idea too. It's only money.
__________________
"Don't worry be happy"
Reply With Quote
  #19  
Old 03-06-2012, 12:28 AM
jepp2 jepp2 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Feb 2010
Location: Rocky Mtns, CO
Posts: 986
Likes: 19
Liked 214 Times in 141 Posts
Default

Quote:
Originally Posted by HAWKEYE10 View Post
I am in a "BIG" learning curve on rifle reloading and was watching a video on how to lube rifle cases. This guy used synthetic motor oil. He poured some in a small container then put the case mouth in it. He then put the case in the shell holder on his press and lightly rubbed his fingers down the side of the case. He said he only lubed one case out of ten. I think you have to tumble them again to get the lube off. I might give that a try. I have found out that there is a lot of ways to lube cases and a lot of them are good. Don
I tried the YouTube case lube method you just watched. To me it wasn't enough to lube to go 10 cases. Sizing just got too hard for cases after the 4'th or 5'th. But I did use the concept and now I use synthetic oil for my case lube. I just apply it with a paper shop towel and roll the cases on it. It really does work well and you never dent cases with too much lube. YMMV
Reply With Quote
  #20  
Old 03-07-2012, 11:00 PM
Bart 44 Bart 44 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Sep 2003
Posts: 146
Likes: 4
Liked 78 Times in 21 Posts
Default

Carbide button, Hornady One Shot lube shot at angle in just some of the case necks. This lube works so well and is so easy to use I can't understand why one would use anything else....

Dennis.
Reply With Quote
  #21  
Old 03-07-2012, 11:21 PM
61woody 61woody is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Feb 2012
Location: Waterloo Ia.
Posts: 45
Likes: 1
Liked 3 Times in 3 Posts
Default

Quote:
Originally Posted by trauma1 View Post
over $100 just for the die and they still say you have to lube some, per the web site. Have not tried one though.
What you are talking about are carbide sizing dies which you do have to still lube the outside of the case. They are geared to high volume reloaders who want extended die life. With a carbide expander you do not need to lube the inside of the necks, just a shot of the hornady spray for the outside and you are good to go.
Reply With Quote
  #22  
Old 03-08-2012, 12:39 AM
gregintenn gregintenn is offline
Member
Fast and easy way to lube rifle cases  
Join Date: Jan 2008
Location: Lafayette, Tennessee
Posts: 6,926
Likes: 6,833
Liked 8,936 Times in 2,910 Posts
Default

I've never lubricated the inside of a case neck, and don't use carbide sizing buttons. I do lube one of every few cases on the outside, below the shoulder.
Reply With Quote
  #23  
Old 03-08-2012, 01:02 PM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

I'm going to try the graphite next time I load .223 cases. I mixed RCBS's lube with alcohol in a spray bottle and while that worked, it was getting a little too much on some and not enough on the rest. I sprayed them while standing up on the loading block and thought that was good enough. I guess I could try shaking them in a box afterwards.

I think most of my trouble comes from the hurry up mode I want to get in like I'm loading pistol ammo. Rifle ammo just isn't like that.
Reply With Quote
  #24  
Old 03-08-2012, 04:09 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by Maximumbob54 View Post
I'm going to try the graphite next time I load .223 cases. I mixed RCBS's lube with alcohol in a spray bottle and while that worked, it was getting a little too much on some and not enough on the rest. I sprayed them while standing up on the loading block and thought that was good enough. I guess I could try shaking them in a box afterwards.

I think most of my trouble comes from the hurry up mode I want to get in like I'm loading pistol ammo. Rifle ammo just isn't like that.
I did some searching for powdered graphite and found a lot of artist places sell it for pretty cheap.

I also read that graphite can cause corrosion on aluminum so if any dies have aluminum (what are Lee outsides made off?) it may be a problem for them or the turret???????

Asbury Carbons - The World's Carbon and Graphite Source - Amorphous Graphite

See other properties:

Graphite - Wikipedia, the free encyclopedia
__________________
Still Running Against the Wind
Reply With Quote
  #25  
Old 03-08-2012, 04:27 PM
Bomberman's Avatar
Bomberman Bomberman is offline
US Veteran
Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases Fast and easy way to lube rifle cases  
Join Date: Dec 2010
Location: Off the beaten path, PA
Posts: 136
Likes: 1
Liked 10 Times in 8 Posts
Default

Quote:
Originally Posted by gregintenn View Post
I've never lubricated the inside of a case neck, and don't use carbide sizing buttons. I do lube one of every few cases on the outside, below the shoulder.
Same here, no inside the neck lube. I do, however, lube all cases below the shoulder.
__________________
Have .44, will travel
Reply With Quote
  #26  
Old 03-08-2012, 07:05 PM
jimkim's Avatar
jimkim jimkim is offline
Member
 
Join Date: Mar 2009
Posts: 121
Likes: 16
Liked 12 Times in 12 Posts
Default

Get a small container. A film canister works well. Fill it 3/4ths full of #8 shot. Add some powdered graphite to the shot. Dip the case necks in and give them a twist. You don't need much graphite at all.
Reply With Quote
  #27  
Old 03-09-2012, 03:07 AM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

Stand them up in the block & use OneShot. It doesn't take much case neck lube.
Reply With Quote
Reply

Tags
223, hornady, rcbs

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cleaning bullet lube out of cases McGregor Reloading 18 11-03-2015 01:36 PM
Fast/Easy to Acquire scope for .22 rifle plate shooting? Emoto Smith & Wesson M&P 15-22 11 04-21-2011 10:08 AM
Lube for reloading 9mm cases retired2006 Reloading 12 04-25-2010 11:35 PM
WTT-Rifle ammo+primed Cases For Handgun cases/primers oldRoger Accessories/Misc - For Sale or Trade 2 05-06-2009 07:00 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:16 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)