Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 03-10-2012, 11:33 AM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default Lizard litter...

After hearing and reading about lizard litter for your tumbler I stopped at the pet store and bought a bag. I did mix it in with the Lyman corn cob media that I had in the tumbler. I's about half and half. The upside is it does get the brass cleaner quicker than straight corn cob media. The down side is the dust. I haven't been putting my top on the tumbler while running it so I can look in there and check the progress. Well I will tell you I put the top on now. All in all I think I will keep using it. Don
__________________
"Don't worry be happy"
Reply With Quote
  #2  
Old 03-10-2012, 11:39 AM
TheTinMan TheTinMan is online now
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Apr 2009
Location: Sorta Downeast
Posts: 933
Likes: 2,866
Liked 1,735 Times in 417 Posts
Default

How big are the pieces of lizard litter and what is it made of?

I got some bird/hamster corncob litter to mix with crushed walnut and it does shine cases better. Unfortunately, the chunks are big enough to clog .223 case mouths REALLY badly. Just make sure you get all of the junk out of your cases.
Reply With Quote
  #3  
Old 03-10-2012, 11:49 AM
Mike, SC Hunter Mike, SC Hunter is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,833
Likes: 13,927
Liked 13,636 Times in 4,936 Posts
Default

I use it all the time. NO MORE high priced media for me.
__________________
S&W Accumulator
Reply With Quote
  #4  
Old 03-10-2012, 12:20 PM
aphelion's Avatar
aphelion aphelion is offline
Member
Lizard litter... Lizard litter...  
Join Date: Sep 2007
Location: Idaho
Posts: 674
Likes: 960
Liked 792 Times in 266 Posts
Default

Quote:
Originally Posted by HAWKEYE10 View Post
I haven't been putting my top on the tumbler while running it so I can look in there and check the progress. Well I will tell you I put the top on now. All in all I think I will keep using it. Don
It doesn't matter which dry media you use, a lot of dust is generated during tumbling. Run it by a window with the sun shining through to see what I mean. It gets worse the more times the media is used. A lot of dust flies when dumping the brass out of the tumbler too. I empty the tumbler into the separator and work the separator outside the house. That dust has nothing in it you want to breathe.
Reply With Quote
  #5  
Old 03-10-2012, 12:37 PM
TAROMAN's Avatar
TAROMAN TAROMAN is offline
US Veteran
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 6,290
Likes: 8,789
Liked 7,778 Times in 2,375 Posts
Default

My tumbler lives in the garden shed. A couple times a year I blow the place out with my leaf blower. No way would I want this mess in my shop.
+ whatever on the lizard litter. Never stuck in a flash hole.
__________________
-jwk-
US Army '72-'95
Reply With Quote
  #6  
Old 03-10-2012, 01:39 PM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default

Quote:
Originally Posted by TheTinMan View Post
How big are the pieces of lizard litter and what is it made of?

I got some bird/hamster corncob litter to mix with crushed walnut and it does shine cases better. Unfortunately, the chunks are big enough to clog .223 case mouths REALLY badly. Just make sure you get all of the junk out of your cases.
The lizard litter is a little more coarse than sand and made of walnut shells. Don
__________________
"Don't worry be happy"
Reply With Quote
  #7  
Old 03-10-2012, 02:00 PM
mr mom mr mom is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Jun 2011
Location: s.w. lower michigan
Posts: 15
Likes: 0
Liked 0 Times in 0 Posts
Default

been useing lizard litter for about 2 years now. i like it cause it dosnt clog the flash hole. as for the dust try a used dryer sheet !!!! it helps alot !!!!
Reply With Quote
  #8  
Old 03-10-2012, 02:02 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Never run it without the top! You are spreading lead and other toxic nasty stuff all over. Primary means of lead poisoning is inhalation.

Use a USED dryer sheet in the tumbler of if you don't have them use a paper towel with some Nu Finish or mineral spirits on it.

Even the pet store bedding is expensive compared to Drill Spot online or Harbor Freight.
__________________
Still Running Against the Wind
Reply With Quote
  #9  
Old 03-10-2012, 04:56 PM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default

Quote:
Originally Posted by Rule3 View Post
Never run it without the top! You are spreading lead and other toxic nasty stuff all over. Primary means of lead poisoning is inhalation.

Use a USED dryer sheet in the tumbler of if you don't have them use a paper towel with some Nu Finish or mineral spirits on it.

Even the pet store bedding is expensive compared to Drill Spot online or Harbor Freight.
Thanks! Next time I buy some I will check those two places out. We are going to keep finding ways to reduce the cost of tumbling media till they pay us to use it. Don
__________________
"Don't worry be happy"
Reply With Quote
  #10  
Old 03-10-2012, 05:10 PM
PattonTime's Avatar
PattonTime PattonTime is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Sep 2007
Location: Minneapolis,MN
Posts: 668
Likes: 38
Liked 104 Times in 65 Posts
Default Tumbling

I have been using a Sonic cleaner for a couple of months now, no more tumbling for me.
I agree that the inhalation of lead dust is not good, my lead levels keep going up and I am trying everything I can to stop that.
I hope I do not have to quit shooting indoors .
But that is probably my next step.
Reply With Quote
  #11  
Old 03-10-2012, 06:22 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by HAWKEYE10 View Post
Thanks! Next time I buy some I will check those two places out. We are going to keep finding ways to reduce the cost of tumbling media till they pay us to use it. Don
Actually if you just wash it, that's as cheap as you can get. It's not as purty but completely functional.
__________________
Still Running Against the Wind
Reply With Quote
  #12  
Old 03-10-2012, 09:45 PM
dla dla is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 468 Times in 278 Posts
Default

Quote:
Originally Posted by HAWKEYE10 View Post
After hearing and reading about lizard litter for your tumbler I stopped at the pet store and bought a bag. I did mix it in with the Lyman corn cob media that I had in the tumbler. I's about half and half. The upside is it does get the brass cleaner quicker than straight corn cob media. The down side is the dust. I haven't been putting my top on the tumbler while running it so I can look in there and check the progress. Well I will tell you I put the top on now. All in all I think I will keep using it. Don
I tried it once.
Reply With Quote
  #13  
Old 03-10-2012, 09:53 PM
rsrocket1 rsrocket1 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Jun 2011
Location: DFW Texas, a free state!
Posts: 755
Likes: 42
Liked 326 Times in 197 Posts
Default

Ditto on the used dryer sheets. After several batches, you stop trapping the walnut dust and only trap the soot and primer dust which is Lead Styphnate (a big contributor to lead poisoning to careless reloaders) so trapping and disposing the dust is a good thing.

If you can't get used dryer sheets, raid the local laundromat or use cut up paper towels. The paper towels work, just not as well as the open weave of used dryer sheets.

If you have a feed store nearby, you can get crushed walnut cheap there. I got 50# for $17 which should last quite a while.
Reply With Quote
  #14  
Old 03-11-2012, 06:47 AM
papajohn428's Avatar
papajohn428 papajohn428 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: May 2004
Location: Coastal Missouri
Posts: 1,898
Likes: 899
Liked 977 Times in 467 Posts
Default

I pour a cup of water into my tumbler barrel right before I button it up to run a batch. It keeps the dust down by quite a bit, and seems to get the brass a little shinier, especially when the media is getting tired.
Reply With Quote
  #15  
Old 03-11-2012, 08:30 AM
novalty's Avatar
novalty novalty is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: May 2009
Location: Southern Maine
Posts: 13,611
Likes: 491
Liked 1,883 Times in 987 Posts
Default

Quote:
Originally Posted by Rule3 View Post
Never run it without the top! You are spreading lead and other toxic nasty stuff all over. Primary means of lead poisoning is inhalation.

Use a USED dryer sheet in the tumbler of if you don't have them use a paper towel with some Nu Finish or mineral spirits on it.

Even the pet store bedding is expensive compared to Drill Spot online or Harbor Freight.
Rule3, which type of media would you recommend from Drill Spot. They have so many different types. Looks like the 14/20 Corn Cob and the 20/20 Corn Cob are the way to go--40lbs for $32 shipped. According to the reviews it has gone up in price recently, one person posted $26 back in January.
Reply With Quote
  #16  
Old 03-11-2012, 12:10 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by novalty View Post
Rule3, which type of media would you recommend from Drill Spot. They have so many different types. Looks like the 14/20 Corn Cob and the 20/20 Corn Cob are the way to go--40lbs for $32 shipped. According to the reviews it has gone up in price recently, one person posted $26 back in January.
I bought the 20/40 Corn for around $28. It has gone up a bit but still a deal for 40 lbs delivered. The Walnut I got at Harbor Freight locally it is called, Fine 24 grit.

In the other thread, I mentioned that I really do not think it matters all that much between the two grades of Corn, there is not that much difference in size. Post #35

How long do you tumble brass?
__________________
Still Running Against the Wind
Reply With Quote
  #17  
Old 03-11-2012, 06:38 PM
novalty's Avatar
novalty novalty is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: May 2009
Location: Southern Maine
Posts: 13,611
Likes: 491
Liked 1,883 Times in 987 Posts
Default

Quote:
Originally Posted by Rule3 View Post
I bought the 20/40 Corn for around $28. It has gone up a bit but still a deal for 40 lbs delivered. The Walnut I got at Harbor Freight locally it is called, Fine 24 grit.

In the other thread, I mentioned that I really do not think it matters all that much between the two grades of Corn, there is not that much difference in size. Post #35

How long do you tumble brass?
Thanks for the advice!
Reply With Quote
  #18  
Old 03-12-2012, 10:59 AM
Romokid Romokid is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2012
Location: Central Massachusetts
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
Default

I just got a 50Lb bag of Zilla crushed walnut shells from Amazon for about $35 with free shipping. I figured I'd give it a try since I was almost out of corncob. So far so good.
Reply With Quote
  #19  
Old 03-12-2012, 01:43 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by Romokid View Post
I just got a 50Lb bag of Zilla crushed walnut shells from Amazon for about $35 with free shipping. I figured I'd give it a try since I was almost out of corncob. So far so good.
That's a good deal!. I have used it and it works great.
__________________
Still Running Against the Wind
Reply With Quote
  #20  
Old 03-12-2012, 02:03 PM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

Econoline 526020G-40 Blast Media, 40 Lbs, Corn Cob, 14/20 Grit

I'm another Drill Spot user.
Reply With Quote
  #21  
Old 03-12-2012, 02:37 PM
ol' geeser ol' geeser is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Aug 2009
Location: Wood Co., Texas
Posts: 394
Likes: 244
Liked 212 Times in 87 Posts
Default

You guys in the soouth should check with you local pecan sheller...mine lets me have all the shells I want and will usually give me a bag or two to sack 'em in.....a couple of minutes with a hammer when I get home and I'm ready to go
Reply With Quote
The Following User Likes This Post:
  #22  
Old 03-13-2012, 07:44 AM
SonnyCrockett's Avatar
SonnyCrockett SonnyCrockett is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Mar 2010
Location: Memphis,TN
Posts: 56
Likes: 0
Liked 5 Times in 4 Posts
Default

all I use is Zilla.....huge bag is cheap at Amazon
2 hours and im clean enough fo reloading...No drier sheets,not a fan of corn cobb
Reply With Quote
  #23  
Old 03-13-2012, 11:36 AM
Fishslayer Fishslayer is offline
US Veteran
Absent Comrade
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
Default

My blood lead level was 18Dl in February. I've started giving my brass a half hour in a Lemi Shine soak prior to tumbling. Gets a load of the bad stuff out of the cases.

An hour in the oven to dry.

The brass shines up a lot quicker and the media is staying much cleaner. Still using the drier sheets tho.

I've also started tumbling outdoors & wearing nitrile gloves EVERY time I handle the brass.

Gonna get tested again in May or June.
Reply With Quote
  #24  
Old 03-15-2012, 08:53 PM
tke861 tke861 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Mar 2012
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
Default

I use the Zilla with a used dryer sheet every batch and a cap full of Nu-Finish every 3000 rounds of 9mm or so. Nu-Finish isn't necessary but the cases are slick as wet frogs and pretty darn shiny after a two hour tumble. I highly recommend it and don't have any complaint about the dust. The deal from Amazon is killer and should last you a long long time as the media really doesnt deteriorate or require changing that often if you use Nu-Finish
Reply With Quote
  #25  
Old 03-15-2012, 09:24 PM
2hawk's Avatar
2hawk 2hawk is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2007
Location: Oregon
Posts: 2,403
Likes: 4,558
Liked 2,141 Times in 770 Posts
Thumbs up tke861, Welcome to the Forum!

I may have to look into the Zilla, but I think I have enough media to last a looong while. I bought the Lizard Litter and noticed the dust issue as I was transferring it to a 5-gal. bucket. So, I got my high velocity air mover (fan), another bucket, and proceeded to pour it from one bucket to the other while in the air stream, and it did a pretty good job of getting the dust out. The yard looked a little brown until ran the sprinkler, though.
__________________
ΜΟΛΩΝ ΛΑΒΕ
Reply With Quote
  #26  
Old 03-15-2012, 09:58 PM
Avery11's Avatar
Avery11 Avery11 is offline
US Veteran
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Dec 2010
Location: Location Location
Posts: 717
Likes: 335
Liked 414 Times in 175 Posts
Default

Try this:

Start in walnut to clean - add cut up used dryer sheets to soak up the dirt. It really does make a difference.

Follow with the superfine nut media from grainger (sp). It's like sand and geta every little nook and cranny but never gets stuck in the cases.

A guy at my club turned me onto it and it's fantastic. I add a little Nu Finish to make them shine.

Here's a link Nut-Based Media, Random, 5 Lbs. - Tumbler Media - Tumblers and Media - 5UKA8 : Grainger Industrial Supply
Reply With Quote
  #27  
Old 03-16-2012, 02:04 AM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default

Quote:
Originally Posted by Avery11 View Post
Try this:

Start in walnut to clean - add cut up used dryer sheets to soak up the dirt. It really does make a difference.

Follow with the superfine nut media from grainger (sp). It's like sand and geta every little nook and cranny but never gets stuck in the cases.

A guy at my club turned me onto it and it's fantastic. I add a little Nu Finish to make them shine.

Here's a link Nut-Based Media, Random, 5 Lbs. - Tumbler Media - Tumblers and Media - 5UKA8 : Grainger Industrial Supply
$58.85 seems like a lot for 5lbs. of walnut shells. Is there something different about this? At the pet store I paid $13 and change for lizard litter. Don
__________________
"Don't worry be happy"
Reply With Quote
  #28  
Old 03-16-2012, 06:40 AM
pdcampy pdcampy is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Apr 2010
Location: Lower Michigan
Posts: 99
Likes: 9
Liked 52 Times in 15 Posts
Default

I've been using corn cob mixed 50/50 with Harbor Freight coarse walnut media and a dryer sheet, and after a couple of hours the cases come out clean and shinny as factory brass.
Reply With Quote
  #29  
Old 03-16-2012, 09:15 AM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by HAWKEYE10 View Post
$58.85 seems like a lot for 5lbs. of walnut shells. Is there something different about this? At the pet store I paid $13 and change for lizard litter. Don
That's insane Must have Titanium, Kryptonite and Dilithium crystals
__________________
Still Running Against the Wind
Reply With Quote
  #30  
Old 03-19-2012, 07:15 AM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Oct 2010
Posts: 7,202
Likes: 9,079
Liked 1,921 Times in 1,043 Posts
Default

If you think that's bad, check out the price on the same brand's tumbler:

Vibratory Tumbler, 115V, 0.18 Cu. Ft. - Vibratory Tumblers - Tumblers and Media - 5UJG5 : Grainger Industrial Supply
Reply With Quote
  #31  
Old 03-19-2012, 09:35 AM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by Maximumbob54 View Post
For polishing your precious GEMS

Raytech Gem Processing
__________________
Still Running Against the Wind
Reply With Quote
  #32  
Old 03-19-2012, 10:09 AM
Hammerdown77 Hammerdown77 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Jul 2010
Location: North Alabama
Posts: 228
Likes: 0
Liked 28 Times in 15 Posts
Default

Quote:
Originally Posted by Fishslayer View Post
My blood lead level was 18Dl in February. I've started giving my brass a half hour in a Lemi Shine soak prior to tumbling. Gets a load of the bad stuff out of the cases.

An hour in the oven to dry.

The brass shines up a lot quicker and the media is staying much cleaner. Still using the drier sheets tho.

I've also started tumbling outdoors & wearing nitrile gloves EVERY time I handle the brass.

Gonna get tested again in May or June.
Most of your exposure is coming from the airborne dust. It is orders of magnitude easier to absorb the lead dust particles through the membranes in your lungs than through your skin. The biggest benefit of the nitrile gloves is that you can strip them off before touching doorknobs and doors and such to get back in the house.

If you really want to reduce your exposure, wear a mask when dealing with the tumbling media.
Reply With Quote
  #33  
Old 03-19-2012, 01:25 PM
Rule3's Avatar
Rule3 Rule3 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: Feb 2008
Location: Florida
Posts: 22,063
Likes: 10,777
Liked 15,463 Times in 6,787 Posts
Default

Quote:
Originally Posted by Fishslayer View Post
My blood lead level was 18Dl in February. I've started giving my brass a half hour in a Lemi Shine soak prior to tumbling. Gets a load of the bad stuff out of the cases.

An hour in the oven to dry.

The brass shines up a lot quicker and the media is staying much cleaner. Still using the drier sheets tho.

I've also started tumbling outdoors & wearing nitrile gloves EVERY time I handle the brass.

Gonna get tested again in May or June.
Put them on a old sheet pan and lay them outside in the Sun. Don't put them in the oven!

You must not be married.
__________________
Still Running Against the Wind
Reply With Quote
  #34  
Old 03-20-2012, 12:13 AM
papajohn428's Avatar
papajohn428 papajohn428 is offline
Member
Lizard litter... Lizard litter... Lizard litter... Lizard litter... Lizard litter...  
Join Date: May 2004
Location: Coastal Missouri
Posts: 1,898
Likes: 899
Liked 977 Times in 467 Posts
Default

Quote:
Originally Posted by Maximumbob54 View Post
That makes the Thumler Model B look like a real bargain!
Reply With Quote
Reply

Tags
223, primer, smith-wessonforum.com, titanium, walnut

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Finally shot this lizard LVSteve The Lounge 22 03-30-2015 10:24 PM
Lizard litter for tumbling. HAWKEYE10 Reloading 14 11-25-2013 08:50 PM
Can you ID this Lizard? SW CQB 45 The Lounge 38 01-28-2013 02:42 PM
I have gone 100% lizard litter and have a tip. HAWKEYE10 Reloading 17 04-30-2012 03:15 PM
Florida Lizard S&W forever The Lounge 23 07-21-2011 07:52 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:21 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)