Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 04-02-2012, 08:38 PM
thndrchiken's Avatar
thndrchiken thndrchiken is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Apr 2011
Location: People's Republic of NJ
Posts: 856
Likes: 8
Liked 88 Times in 66 Posts
Default Preferred powders for 5.56

Hello all, I recently put together an AR. I am looking for suggestions on what your preferred powders are for 55 gr and 62 fmj. I currently have W748, I3031, I4895, RE15, Benchmark and I4064 on hand that would work, or should I consider something like H335/W844. I'm not really concerned about velocity, but would like to keep carbon build up to a minimum with an accurate load. I'd be using LC brass and bulk pulled bullets.

Thanks, Rick
Reply With Quote
  #2  
Old 04-02-2012, 08:51 PM
JohnK JohnK is offline
US Veteran
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Oct 2002
Location: Tennessee., USA
Posts: 749
Likes: 2
Liked 384 Times in 170 Posts
Default

Would like to hear opinions on this.

I grew up on IMR powders, and Hercules powders.

I have a 5.56 Smith MP 15. IMR 4895 is a bit slow burning (50-55 gr bullets), at least it seems so.

Varget ?

I used to have a Powley computer, slide rule thingy, for IMR powders, that was great for picking the "correct" powder for various calibers, my ex, now has it, though haven't a clue what she will use it for.
__________________
NRA Instructor

Last edited by JohnK; 04-02-2012 at 08:55 PM.
Reply With Quote
  #3  
Old 04-02-2012, 08:53 PM
Tom Beavert's Avatar
Tom Beavert Tom Beavert is offline
US Veteran
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Mar 2007
Location: Congress, AZ
Posts: 1,188
Likes: 2,321
Liked 1,255 Times in 538 Posts
Default 5.56

W748 works fine, an OK place to start.
tb
__________________
frontsightnsqueaz
Reply With Quote
  #4  
Old 04-02-2012, 09:25 PM
imashooter2's Avatar
imashooter2 imashooter2 is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: May 2003
Location: PA
Posts: 1,215
Likes: 144
Liked 445 Times in 188 Posts
Default

Concur. Nothing wrong with the 748 that you already have.
Reply With Quote
  #5  
Old 04-02-2012, 09:45 PM
thndrchiken's Avatar
thndrchiken thndrchiken is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Apr 2011
Location: People's Republic of NJ
Posts: 856
Likes: 8
Liked 88 Times in 66 Posts
Default

Yeh, I figured that the 748 would do well, it's what I use for 223 and 223AI bolt guns. Just wasn't sure how well it would work pressure wise for a semi auto.
Reply With Quote
  #6  
Old 04-02-2012, 09:58 PM
cjw3 cjw3 is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Dec 2009
Location: Georgia
Posts: 858
Likes: 14
Liked 82 Times in 52 Posts
Default

I use H335 most of the time in my AR. I did have a little 3031 I needed to use up so gave it a try. Except for crunching in the measure, it grouped as well as the 335.
Reply With Quote
  #7  
Old 04-02-2012, 10:03 PM
ILLWIND ILLWIND is offline
Member
Preferred powders for 5.56  
Join Date: Feb 2004
Location: Western Wisconsin
Posts: 337
Likes: 181
Liked 98 Times in 64 Posts
Thumbs up

I use H335, BLC2, 2015, 2460, and Varget. I use each one with a different bullet; 5 powders, 5 different bullet combo's. 2015 has very small velocity variation. H335 and a 50gr Nosler BalTip has been the most accurate for me. I shoot a pair of AR's and on a good day I have had 5 shot ragged hole groups at 100 meters. Sold my A-bolt and Rem .223 because they couldn't come close to that accuracy. Even the inexpensive Hornady 55gr SP will shoot 1/2 moa at 100 meters. Love the AR! My brother uses 748...works OK for him.
Reply With Quote
  #8  
Old 04-02-2012, 10:04 PM
TNDave TNDave is offline
Member
 
Join Date: May 2005
Posts: 1,063
Likes: 310
Liked 405 Times in 105 Posts
Default

Varget is a great powder.
Reply With Quote
  #9  
Old 04-02-2012, 10:08 PM
mosquito mosquito is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Mar 2012
Posts: 267
Likes: 50
Liked 132 Times in 59 Posts
Default

I just loaded 1000 rounds of .223 tonight with H335. I have used a few different powders but H335 meters so well through my Dillon 550B, that it just works!!!!! I just picked up 2 pounds of CFE223 (Hodgden's new Copper Fouling Eliminator ) powder and am looking forward to giving that a try. Anything that minimizes cleaning, can't be bad.....as long as it works!

G
Reply With Quote
  #10  
Old 04-02-2012, 10:48 PM
Fkimble Fkimble is offline
Member
Preferred powders for 5.56  
Join Date: Jul 2009
Location: Georgia
Posts: 476
Likes: 1
Liked 53 Times in 39 Posts
Default

W748, I3031, I4895, RE15, Benchmark all are suitable for 223. Just use a manual or 2 to check for the correct amount for your bullet weight.
Reply With Quote
  #11  
Old 04-02-2012, 11:26 PM
lmcgust lmcgust is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Aug 2009
Location: Montreal, Canada
Posts: 124
Likes: 32
Liked 5 Times in 5 Posts
Default

Benchmark powder is supposed to be optimal for smaller cases like 223. Since you already have it, have you tried it before in 223 or other applications?
Regards,
Guy-
Reply With Quote
  #12  
Old 04-03-2012, 12:00 AM
BUFF BUFF is offline
SWCA Member
Absent Comrade
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Nov 2002
Location: SLC, Utah
Posts: 5,062
Likes: 739
Liked 3,271 Times in 1,282 Posts
Default

Winchester's handloading component and data guidebook says to use 748 with 55 grain bullets for their factory load duplication. I like it very much in .223.
Reply With Quote
  #13  
Old 04-03-2012, 12:18 AM
Homie Homie is offline
US Veteran
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Jul 2005
Posts: 776
Likes: 574
Liked 271 Times in 181 Posts
Cool

FWIW, Hodgdon's CFE223 proved to give EXCELLENT accuracy and velocity
in my bolt guns.

Good shooting.
Reply With Quote
  #14  
Old 04-03-2012, 08:36 AM
thndrchiken's Avatar
thndrchiken thndrchiken is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Apr 2011
Location: People's Republic of NJ
Posts: 856
Likes: 8
Liked 88 Times in 66 Posts
Default

Quote:
Originally Posted by lmcgust View Post
Benchmark powder is supposed to be optimal for smaller cases like 223. Since you already have it, have you tried it before in 223 or other applications?
Regards,
Guy-
I picked it up for use in my 223AI, but couldn't get to produce grooups like the 748, haven't tried it in the 223 yet.
Reply With Quote
  #15  
Old 04-03-2012, 08:39 AM
thndrchiken's Avatar
thndrchiken thndrchiken is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Apr 2011
Location: People's Republic of NJ
Posts: 856
Likes: 8
Liked 88 Times in 66 Posts
Default

Quote:
Originally Posted by Fkimble View Post
W748, I3031, I4895, RE15, Benchmark all are suitable for 223. Just use a manual or 2 to check for the correct amount for your bullet weight.
I hear you, the manual is just that a manual, it don't tell you what happens in the real world, especially when dealing with semi auto's. I have 12 manuals and only 1 the Lyman # 47 uses a colt AR as their test barrel. All the others use pressure barrels or bolt guns.
Reply With Quote
  #16  
Old 04-03-2012, 11:05 AM
HAWKEYE10's Avatar
HAWKEYE10 HAWKEYE10 is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Apr 2009
Location: MURFREESBORO TN.
Posts: 5,384
Likes: 90
Liked 402 Times in 177 Posts
Default

I am new to rifle reloading and started out with Ramshot TAC. It meters good so I like that. I want to try some different powders like H335 and W748. Don
__________________
"Don't worry be happy"
Reply With Quote
  #17  
Old 04-04-2012, 09:27 AM
safarihunter safarihunter is offline
Member
Preferred powders for 5.56  
Join Date: Nov 2003
Location: Northern Indiana
Posts: 120
Likes: 1
Liked 4 Times in 2 Posts
Default

Just to keep things simple, I use WW 748 in all my 223's
I have shot sub 2's with my HB varmint rifles so you aren't giving up any accuracy
Reply With Quote
  #18  
Old 04-04-2012, 09:47 AM
kb1903 kb1903 is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Apr 2011
Posts: 172
Likes: 6
Liked 148 Times in 47 Posts
Default

I use WC844, which is similiar to H335. Meters well, I use 25 grains with the 52 SMK, and 23.5 with 69SMK. Very accurate in my match grade AR. 1 1/2 groups at 200 yards are common.
Reply With Quote
  #19  
Old 04-05-2012, 12:06 AM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

If you are loading on a progressive, a ball or spherical powder will be easier. I use AA2520 because I also use it in my 308. It offers a near comrpessed load & accuracy is quite good, vel is fine too, all w/ slightly lower pressures.
Reply With Quote
The Following User Likes This Post:
  #20  
Old 04-05-2012, 03:34 AM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

Quote:
Originally Posted by thndrchiken View Post
Hello all, I recently put together an AR. I am looking for suggestions on what your preferred powders are for 55 gr and 62 fmj. I currently have W748, I3031, I4895, RE15, Benchmark and I4064 on hand that would work, or should I consider something like H335/W844. I'm not really concerned about velocity, but would like to keep carbon build up to a minimum with an accurate load. I'd be using LC brass and bulk pulled bullets.

Thanks, Rick
I like H335 best for AR ammo but I do use other powders for my .223 ammo used in a bolt action rifle. W748 also works well and since it's also a ball powder meters well too.
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
  #21  
Old 04-05-2012, 10:00 AM
Beans Beans is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Jun 2004
Location: Southern Az Territory, Border County
Posts: 494
Likes: 16
Liked 50 Times in 21 Posts
Default

Although many have had good results with W748 powder I never did.
My Colt H-bar produces less then 1/2 inch groups at 100 yards using Accurate 2230 powder. I have also gotten good results with Varget and RE15.
__________________
Semper FI
Reply With Quote
  #22  
Old 04-05-2012, 10:19 AM
rasmith3442's Avatar
rasmith3442 rasmith3442 is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Mar 2011
Location: Central Ohio
Posts: 186
Likes: 68
Liked 130 Times in 47 Posts
Default

I agree with Beans on all 3 powders.

AA2230 for my M4, shooting 62 gr. M855's and Sierra 65 BT's. Meters like water through a progressive (I now hate that word) press.

RE15 for my Remington 700 VTR, shooting 70 gr. Bergers.

Varget for my custom Kimber shooting 80gr. Bergers.

S/F,

RAS
Reply With Quote
  #23  
Old 04-05-2012, 10:21 AM
CookE CookE is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Sep 2010
Location: HAYS, KANSAS
Posts: 116
Likes: 1
Liked 2 Times in 2 Posts
Default .223 Powder..........

I used "ACCURATE 2230" for years with absolutely no problems.

CookE..
Reply With Quote
  #24  
Old 04-05-2012, 01:22 PM
arc2x4 arc2x4 is offline
Member
 
Join Date: Apr 2005
Posts: 125
Likes: 2
Liked 30 Times in 11 Posts
Default

24.5 grains of varget, 69gr Sierra HPBT match King, and a federal match primer shoots consistently small groups in my AR's.
Reply With Quote
  #25  
Old 04-05-2012, 01:40 PM
rck281 rck281 is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Feb 2010
Location: Kansas City area
Posts: 1,106
Likes: 161
Liked 517 Times in 168 Posts
Default

My first choice is W748. I have used a lot of H335 but have found it more sensitive to temperature than I like. I intend to try the new Hodgdon CFE223 powder. I think H322 is too fast for those bullet weights and is better suited to slightly smaller cartridges as the 222 and 6mmPPC. Varget is a little slow but I use it in my 22-250. Not sure how it would work in the 223.
__________________
Dick
Reply With Quote
  #26  
Old 04-05-2012, 07:15 PM
kbox kbox is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Dec 2009
Location: Alabama
Posts: 39
Likes: 0
Liked 0 Times in 0 Posts
Default

BLC-2 works great and drops dead on. Also use it in my 308.
Reply With Quote
  #27  
Old 04-26-2012, 08:25 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

Hi guys my first post in this forum...I have been loading my 8x57's with IMR4895 and have it on hand. I started reloading for my Sport in .223rem, Hodgdon's reloading data said I could use it with the 55grain and 69 grain (I have hornady 68grain BTHP Match). I wasnt very happy with the performance. Yesterday I picked up 2 pounds of CFE223 and going to start loading with it tonight. Are there any particulars that I should look out for? How has it performed for any of you who use it? Thanks Alot.
__________________
Grover Oathkeeper

Last edited by oneyeopn; 04-26-2012 at 08:27 PM.
Reply With Quote
  #28  
Old 04-26-2012, 08:41 PM
Curt Blunt Curt Blunt is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Apr 2009
Location: Sacramento CA
Posts: 73
Likes: 1
Liked 25 Times in 15 Posts
Default

Quote:
Originally Posted by oneyeopn View Post
Hi guys my first post in this forum...I have been loading my 8x57's with IMR4895 and have it on hand. I started reloading for my Sport in .223rem, Hodgdon's reloading data said I could use it with the 55grain and 69 grain (I have hornady 68grain BTHP Match). I wasnt very happy with the performance. Yesterday I picked up 2 pounds of CFE223 and going to start loading with it tonight. Are there any particulars that I should look out for? How has it performed for any of you who use it? Thanks Alot.
In what way was the performance lacking? Cuz I'm thinking of starting with H-4895, which I know is close but not identical.
Reply With Quote
  #29  
Old 04-26-2012, 08:55 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

I wasnt getting the performance that I thought I should. my groups were good but really no better than the federal xm193 5.56 that I have been shooting, plus I was having bridging problems in my Perfect Powder Measure, which I didnt have with the 8mm Mausers.
__________________
Grover Oathkeeper
Reply With Quote
  #30  
Old 04-29-2012, 09:12 PM
oneyeopn's Avatar
oneyeopn oneyeopn is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Feb 2012
Location: Ford, Ks
Posts: 4,216
Likes: 5,343
Liked 2,270 Times in 1,273 Posts
Default

Ok I loaded 100 55gr Hornady Zmax and 50 55gr Hornady Vmax 26.8 grains of CFE223, toward the low end of the recommended loading scale, Misc. Brass and CCI #41 5.56 primers. The Zmax cost me $.25 to load and the Vmax cost me $.27 per bullet. I saw the Zmax at our local wallyworld for a buck a round so I feel pretty good for the cost.
__________________
Grover Oathkeeper
Reply With Quote
  #31  
Old 04-30-2012, 11:55 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

Quote:
Originally Posted by arc2x4 View Post
24.5 grains of varget, 69gr Sierra HPBT match King, and a federal match primer shoots consistently small groups in my AR's.
AA bills their AA2520 as a ball equiv to Varget. I have to say, accuracy in my 16" M+P is quite a bit better than TAC or H322. I have other powder to paly w/ but they have to be ball/spherical for my 550B.
Reply With Quote
  #32  
Old 05-01-2012, 01:59 AM
Frank46 Frank46 is offline
US Veteran
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Sep 2010
Location: New Iberia, Louisiana
Posts: 4,588
Likes: 25,427
Liked 3,380 Times in 1,736 Posts
Default

Used to use H335 when loading 223 with 55 grain bullets. When I went to the 62 grain bullets switched to WW748. Frank
Reply With Quote
  #33  
Old 05-05-2012, 12:28 PM
M_E_'s Avatar
M_E_ M_E_ is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: May 2012
Location: Phoenix, Arizona
Posts: 83
Likes: 2
Liked 15 Times in 9 Posts
Default

What ever powder you use MAKE SURE IT IS TEMPERATURE INSENSITIVE!!! That way you get same point of impact any time of year. Some powders point of impact have been tested by the NRA where the point of impact MOVES up to 10 inches with just temperature changes.
Reply With Quote
  #34  
Old 05-05-2012, 11:59 PM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

Just an addition to my original answer, a friend just bought some of that new Hodgdon CFE223 powder and loaded up some AR ammo. Well let me tell you I was very impressed. Not only is that powder as clean as advertised it also delivered superior accuracy and velocity than most anything else I've ever tried. Sorry I can't tell you what the charge weight is because I forgot what he said but I do know it was used with a 55gr bullet.

I will be buying some soon and doing some tests of my own. I have had good success with H335 or WC844 in my AR ammo and with Varget, W748 and H4895 for bolt action rifle ammo but if all works out like I think it will I just might be switching over to CFE223 for both, soon...
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
  #35  
Old 05-06-2012, 09:02 AM
philevans philevans is offline
Member
Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56 Preferred powders for 5.56  
Join Date: Nov 2004
Location: austin, texas
Posts: 108
Likes: 17
Liked 58 Times in 36 Posts
Default

Quote:
Originally Posted by oneyeopn View Post
Ok I loaded 100 55gr Hornady Zmax and 50 55gr Hornady Vmax 26.8 grains of CFE223, toward the low end of the recommended loading scale, Misc. Brass and CCI #41 5.56 primers. The Zmax cost me $.25 to load and the Vmax cost me $.27 per bullet. I saw the Zmax at our local wallyworld for a buck a round so I feel pretty good for the cost.
my initial trials with S&W M&P Sport:
27.5CFE, Hornaday 55gr hpbt, .651moa.
25.0CFE, Sierra 69gr hpbt MK, .905moa.
24.0Varget, 60gr A-max, .668moa = best 5 shot groups so far.
powder individually weighed by rcbs balance beam.
~ >20yr old cci blue box bench rest primers.
__________________
A&M'61,NRAlife'61.
Reply With Quote
Reply

Tags
223, colt, fouling, hornady, kimber, nosler, nra, primer, rcbs, remington, smith & wesson, smith and wesson, winchester

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Preferred Speedloaders? Brooklynite S&W Revolvers: 1961 to 1980 23 07-05-2014 07:28 PM
Preferred Pistol Powders jayman9207 Reloading 18 03-22-2013 05:01 AM
Preferred Sight JayMarshall Smith & Wesson M&P 15-22 14 07-24-2011 11:05 PM
WTB: S&W Mod 60, 36 FTF in Nevada Preferred zebrajeb WANTED to Buy 0 04-20-2010 10:07 PM
PREFERRED 29 DASH? Northrunner S&W Revolvers: 1980 to the Present 4 03-04-2010 04:00 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:30 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)