I bought a bag of Winchester 115gr jhp bullets for my 9mm. I can not find a load for these specific bullets. Should i use the load that my hornady book says for the 115gr xtp? Or does anyone have a load for these?

You can use the data for any 115gr jacketed bullet.

Just start with the minimum load and work up, carefully.

Pay particular attention to the COL, as the 9mm is sensitive
to bullet seating depth.

The deeper the bullet is seated, the higher the pressure.

thank you exactly what i needed to know!

http://data.hodgdon.com/main_menu.asp

Lotta good info here.