I drill a small hole in the side of the case (for a quick visual).
Fill Primer Pocket with Permatex Blue RTV Silicon, (hump it up) let it dry and use a razor blade to cut to flush.
Silicon can be cut out and redone when worn.
You can COLOR CODE the case with a COLOR PERMANENT MARKER if you so choose.
Load what ever bullet you choose
MINUS THE POWDER PLEASE!!!!
You should be good to go.
***** For 22LR Revolvers ****, you can use #4 DRYWALL ANCHORS, THEY ARE ABOUT 7/8" LONG.
The little plastic things you put in the drywall for a screw to hold a framed picture. Mine are Yellow in color.
They are CHEAPER than 22 snap caps and LAST LONGER, YEA!!!!!
Good Luck!
MOONMAN