Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 12-10-2012, 08:02 PM
matthewmia1 matthewmia1 is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Dec 2012
Location: ohio
Posts: 8
Likes: 2
Liked 0 Times in 0 Posts
Default reloading a 9mm

I'm thinking of starting to reload my own ammo.Does anyone known any good site to order from and maybe what site to say away from
Reply With Quote
  #2  
Old 12-10-2012, 08:08 PM
rsrocket1 rsrocket1 is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jun 2011
Location: DFW Texas, a free state!
Posts: 755
Likes: 42
Liked 326 Times in 197 Posts
Default

Most of the folks who reload recommend Powder Valley and while I can find stuff decently priced locally, if I had to order, this would certainly be worth checking out.

Realize that there is such a thing called hazardous material handling fee (hazmat) that adds $27.50 to your order whether you order 1 primer or up to 48 pounds of powder and primers so your costs get reduced if you order in bulk.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 12-10-2012, 08:20 PM
jepp2 jepp2 is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Feb 2010
Location: Rocky Mtns, CO
Posts: 986
Likes: 19
Liked 214 Times in 141 Posts
Default

If you are going to load 9mm, that is probably the round you can buy for the closest to reloaded ammo prices. Reloading offers many benefits of being able to create a load you cannot buy. To me, reloading adds to the shooting experience.

But, reloading equipment costs money. Reloading takes time. To produce the lowest cost reloads, you need to buy in quantity. So as long as you have the time and money to obtain the equipment that is best suited for you, go for it.

Reloading also requires attention to detail and care to avoid issues. It is best done without the distraction of kids, TV, and other competing activities. It is always best to know what you are getting ready to dive in to.
Reply With Quote
The Following 3 Users Like Post:
  #4  
Old 12-10-2012, 08:22 PM
Titegroups Titegroups is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Feb 2010
Location: Florida
Posts: 1,338
Likes: 65
Liked 247 Times in 166 Posts
Default

Look for a supplier locally.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 12-11-2012, 09:21 AM
fltbed's Avatar
fltbed fltbed is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jul 2011
Posts: 88
Likes: 344
Liked 44 Times in 27 Posts
Default

What are you planning on ordering, equipment or components?
Reply With Quote
  #6  
Old 12-11-2012, 10:05 AM
blujax01's Avatar
blujax01 blujax01 is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Aug 2010
Location: C-Bus
Posts: 6,335
Likes: 4,311
Liked 4,916 Times in 2,086 Posts
Default

My recommendation for the first site is www.Amazon.com. Put "The ABC's Of Reloading" in their search engine and buy a copy.
Reply With Quote
The Following 5 Users Like Post:
  #7  
Old 12-11-2012, 10:27 AM
Geno44 Geno44 is offline
Member
reloading a 9mm  
Join Date: Oct 2008
Location: S/W Illinois
Posts: 923
Likes: 554
Liked 1,152 Times in 445 Posts
Default

jepp2 makes a good point. I've beeen a reloader for 45 years but recently componants have risen dramatically in price and good reloading equipment has done the same. I'm still using bullets (.270) that I bought for a nickle but I noticed last weekend they are now twenty eight cents each! If 9mm is the only caliber you are plan to reload, check componant costs in the quantity you will buy and cost of all the equipment you will need, to see if it makes economic sense. It's a lifetime hobby and I enjoy it but 9mm and .223 are often on sale at prices that limit savings obtained by reloading. This is not so true with other calibers.
Reply With Quote
The Following User Likes This Post:
  #8  
Old 12-11-2012, 01:32 PM
1sailor 1sailor is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Dec 2011
Location: South Oregon Coast
Posts: 1,820
Likes: 89
Liked 1,648 Times in 584 Posts
Default

Using plated bullets from Berry's I can reload 9mm for about $6.50 for a box of 50. I can't even come close to that buying the cheapest ammo on sale in bulk. Actually I just redid my math. Since the price of primers has gone up it now costs me $6.75 per box of 50. Still about half of the cheapest 9mm I can buy across the counter or in bulk online.

Last edited by 1sailor; 12-11-2012 at 02:42 PM.
Reply With Quote
  #9  
Old 12-11-2012, 07:04 PM
Jamie Jamie is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Nov 2010
Posts: 383
Likes: 7
Liked 45 Times in 28 Posts
Default

Powder Valley is a good place, see if you know anyone who reloads, go in together to split up the shipping and hazmat fees, if not, try local, gun shows, Gander Mountain. Precision Delta, Bayou Bullets are two inexpensive bullets to reload, I've had good luck with both. The PDs are JHP, the Bayou Bullets are coated LRN. I bought/got a Lee 4 hole turret press for Christmas, loaded 1,000 rounds, (500 38 special, 500 9mm), compared to Wal Mart prices, saved enough to nearly pay for the press and dies.
Reply With Quote
  #10  
Old 12-11-2012, 07:11 PM
SMSgt's Avatar
SMSgt SMSgt is online now
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jul 2010
Location: Florida
Posts: 6,555
Likes: 3,343
Liked 9,152 Times in 3,432 Posts
Default

You got to do your homework. Where one site is a few bucks cheaper on its item, it may be a few bucks more on shipping. I use many sites.
Reply With Quote
  #11  
Old 12-11-2012, 10:17 PM
RichardF RichardF is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Mar 2011
Posts: 97
Likes: 3
Liked 4 Times in 4 Posts
Default

I've ordered equipment and reloading items from MidwayUSA, Natchez Shooters Supply and Mid South Shooters Supply. I also have a local sporting goods store that carries a good selection of reloading supplies to avoid the Haz mat fee.
Reply With Quote
  #12  
Old 12-11-2012, 10:36 PM
TSchuster TSchuster is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Oct 2012
Posts: 20
Likes: 0
Liked 3 Times in 3 Posts
Default

Dillon Precision for the best progressive machine with a no BS warranty.
Reply With Quote
The Following User Likes This Post:
  #13  
Old 12-12-2012, 12:23 AM
Fishslayer Fishslayer is offline
US Veteran
Absent Comrade
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
Default

Last time I looked X-treme bullets (plated, good stuff) had free shipping on 1K or more bullets.

Scrounge brass. No real reason to buy the stuff new. Maybe a batch of used to get started. Check the Swap & Sell board on Castboolits.com
Reply With Quote
  #14  
Old 12-12-2012, 04:51 AM
Argonnakid's Avatar
Argonnakid Argonnakid is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Mar 2011
Location: Virginia Beach,VA
Posts: 460
Likes: 85
Liked 126 Times in 92 Posts
Default

Welcome to the Forum, really great info to be found here. I load for 9mm too and as some of the others have said, it's one of the cheaper rounds to buy "preloaded". You need to be shooting alot to make it worth it. I go thru about 300 rounds a month myself. The kids love to shoot and the wife is a good shot too. I also reload for .380acp, which I use the same powder for. It helps to offset the cost of powder if you can use it for various calibers. If your not shooting that much, buy a box or two of factory ammo. Save your brass, it doesn't go bad sitting on a shelf. You can build up you brass supply as you build your know how on reloading.
Do you have any friends that reload? If so, ask them if you can try out their set-up. It would be ideal to try several different companies equipment out if you can. If you don't like it, your not going to use it. Start out with a simpler press. It's easy to make a mistake and someone can get hurt. The single stage and turret presses are a good place to start. You can watch what your doing with each round. If reloading is for you, then you can move up to something bigger, badder, faster(read more money). The Lee 4-hole turret is where I started and it acts as a single stage or an auto-indexing turret. You can get Lee products at a good price at FSreloading.com. You can get (complete) kits there.
Like Geno44 said, this is a life time hobby. Once you get going,it's hard to stop.
__________________
15T,15-22,5946 & some not S&W
Reply With Quote
The Following User Likes This Post:
  #15  
Old 12-12-2012, 07:06 AM
blujax01's Avatar
blujax01 blujax01 is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Aug 2010
Location: C-Bus
Posts: 6,335
Likes: 4,311
Liked 4,916 Times in 2,086 Posts
Default

I just noticed your location. Forget the Internet.

Go here: http://finfeatherfuroutfitters.com/c...tore-i-70.html

Seriously.
Reply With Quote
  #16  
Old 12-12-2012, 09:10 AM
matthewmia1 matthewmia1 is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Dec 2012
Location: ohio
Posts: 8
Likes: 2
Liked 0 Times in 0 Posts
Default

Thanks for the help everyone
Reply With Quote
  #17  
Old 12-12-2012, 12:47 PM
1sailor 1sailor is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Dec 2011
Location: South Oregon Coast
Posts: 1,820
Likes: 89
Liked 1,648 Times in 584 Posts
Default

Not sure why so many guys say it's barely worth reloading 9mm. True, you don't save as much as with a magnum caliber but if you plan to shoot a lot the savings can add up fast. Allowing for the cost of the equipment I broke even at about 2000 rounds. From that point on I started shooting quality 9mm for about half the price of the cheapest bargain ammo. If you only plan on shooting a couple of boxes a month it could take a couple of years to break even. However, you can still tailor your loads to the type of shooting you do and to what's most accurate to shoot in your pistol. In the past year I've put over 6000 rounds downrange so it has saved me quite a bit.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 12-12-2012, 01:42 PM
Fishslayer Fishslayer is offline
US Veteran
Absent Comrade
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
Default

Quote:
Originally Posted by 1sailor View Post
Not sure why so many guys say it's barely worth reloading 9mm. True, you don't save as much as with a magnum caliber but if you plan to shoot a lot the savings can add up fast.
How quickly people forget. During the Great Ammo Drought of '09 the problem was finding ammo at all. Except for Walmart the people who had it were gouging our eyes out. I have a couple boxes of .45ACP WWB under the bed for which I paid $55/100 at Big 5. Never used it because I started reloading.
Reply With Quote
The Following 3 Users Like Post:
  #19  
Old 10-12-2017, 02:46 PM
GranDoug's Avatar
GranDoug GranDoug is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jul 2017
Location: Homosassa, Fl
Posts: 16
Likes: 0
Liked 2 Times in 2 Posts
Default

try to purchase your powder and primers in a local gun store for a couple of reaseons:
1) good advice on a specific load instead of digging it out of a reloading manual, BUT the advice of getting a copy of The ABC's of Reloading is good advice, just as a refresher.
2) You will save a lot not having to pay the shipping for powder and primers. The premium is costly. If you live in an area without a gun shop, or big box sporting goods store, you'll have to bite the bullet (sorry) and order.
Reply With Quote
  #20  
Old 10-12-2017, 03:30 PM
rockquarry rockquarry is offline
Member
 
Join Date: Aug 2005
Posts: 7,552
Likes: 4
Liked 8,885 Times in 4,121 Posts
Default

You usually get what you pay for. If accuracy is not a priority, cheap commercial ammo will work fine, but you can handload better ammo, particularly if you are experimentally inclined and pay attention to detail.
This holds true regardless of whether you are loading rifle or handgun cartridges. It takes a while to learn the process and to do everything right, something many today have little interest in doing. However, most who expend the effort find the results are well worth it.
Reply With Quote
  #21  
Old 10-13-2017, 02:52 AM
hdwhit hdwhit is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Sep 2016
Location: North Texas
Posts: 804
Likes: 86
Liked 482 Times in 300 Posts
Default

Quote:
matthewmia wrote:
I'm thinking of starting to reload my own ammo.
As others have suggested, the first place to start is with a reloading manual. Many people like the Lee manual, others the Lyman manual. I personally prefer the Hornady manual. It doesn't matter which one you get so long as you thoroughly read the "How to Reload" section before you do anything else.

Then, thoroughly read it again. Seriously, you will be amazed what you missed the first time through.

Once you have read the manual twice, then set down and write out a set of reloading procedures based on what you have learned. It helps to make this in the form of a checklist that you can follow, checking off each step as you complete it. This will make sure you don't skip or overlook a step.
Reply With Quote
The Following User Likes This Post:
  #22  
Old 10-13-2017, 06:11 AM
292's Avatar
292 292 is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jun 2017
Location: Northeastern NC
Posts: 460
Likes: 1,195
Liked 629 Times in 228 Posts
Default

To really save money, cast your own bullets. Pretty cool to get the most expensive component for free. But the best reason to reload and cast is because it's fun and rewarding.
__________________
Do it outdoors
Reply With Quote
  #23  
Old 10-13-2017, 06:56 AM
gwpercle's Avatar
gwpercle gwpercle is online now
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,390
Liked 8,045 Times in 3,651 Posts
Default

Many of us got our "feet wet" with a Lee Classic Loader (aka whack-a-mole) $28.99 @ Midway. In 1967 it was $9.99 and got me started.
It's not a fast production method but teaches the basics well, good ammo can be produced and if the reloading bug bites you can move on. I still have mine and use it . If you loose interest in reloading you haven't lost an investment of hundred's of dollars .

A step up , but still reasonable in cost, is the Lee Hand Press Kit and a set of Lee dies. This is a small "C" press that you do not bolt to a bench .
Goes anywhere , operates with your two hands. I reload all my 9mm with one of these , they are "handy". The Hand Press Kit has everything except dies, Lee dies come with a shell holder , this + a loading manual, powder, primers and bullets is the basic's .
To me the disadvantage to the Classic (whack-a-mole) Loader is the noise....you tap everything in and out with a mallet (no press) loading inside the house can get some comments from others..."stop making all that racket" is common. The hand press is quite.

Get a loading block to hold the cases while loading.....I didn't and immediately realized you must have something to keep cases from falling over and rolling all over the place... MTM Universal Reloading Tray, my favorite.

If you try reloading and like it , it's a most fun and interesting hobby. Being the master of your own ammo supply is very satisfying and you can create ammo not available through dealers. Odd, obsolete or special loads (reduced power) are not a problem for the reloader.
I have been doing it for 50 years and it is still fascinating, fun and rewarding.
I don't know about saving money...you will shoot more.
Gary

Last edited by gwpercle; 10-13-2017 at 07:00 AM.
Reply With Quote
The Following User Likes This Post:
  #24  
Old 10-13-2017, 08:42 AM
joeintexas's Avatar
joeintexas joeintexas is offline
US Veteran
Absent Comrade
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Dec 2010
Location: Pensacola, Fl
Posts: 4,388
Likes: 9,733
Liked 7,187 Times in 2,603 Posts
Default

If you are talking components Xtreme Bullets makes very good plated ammo, watch for sales and you can save a little. For lead bullets which are cheaper, Summers Enterprises in Mississippi makes a very good bullet and shipping is that same day usually. Good selection and Donnie is easy to work with. Tell him Joe in Pensacola said hey. When I lived in Texas you could pick up any left brass at the range free, the gun club here in Florida requires each shooter to pick up all their brass so nothing is left to scrounge, fortunately I have buckets of the stuff. Pick up all you can if allowed. Primers I usually wait and buy at gun shows as it has been 10$ per thousand cheaper than locally. Powder the same way. That darn hazmat fee really hurts on primers and powder, buy in bulk when possible. Good luck, watch carefully, read, read, read and have fun.
Reply With Quote
  #25  
Old 10-13-2017, 11:52 PM
flyrobb's Avatar
flyrobb flyrobb is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Mar 2013
Location: N. Colorado
Posts: 675
Likes: 553
Liked 504 Times in 218 Posts
Default

I wonder after 5 years if the OP ever started reloading
Reply With Quote
The Following 3 Users Like Post:
  #26  
Old 10-14-2017, 08:26 AM
jhnttrpp jhnttrpp is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Nov 2016
Location: Sneads Ferry NC
Posts: 463
Likes: 575
Liked 509 Times in 195 Posts
Default

Quote:
Originally Posted by flyrobb View Post
I wonder after 5 years if the OP ever started reloading
I don't know about the OP but I'm in his shoes "today" so the thread was very opportune.
Reply With Quote
The Following 3 Users Like Post:
  #27  
Old 10-14-2017, 09:20 AM
kbm6893 kbm6893 is online now
SWCA Member
reloading a 9mm reloading a 9mm  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,625
Likes: 636
Liked 6,861 Times in 2,541 Posts
Default

Quote:
Originally Posted by Fishslayer View Post
How quickly people forget. During the Great Ammo Drought of '09 the problem was finding ammo at all. Except for Walmart the people who had it were gouging our eyes out. I have a couple boxes of .45ACP WWB under the bed for which I paid $55/100 at Big 5. Never used it because I started reloading.
After the Newtown shooting, ammo was impossible to find. And when you could, it was $18 for 50 Rounds at Walmart, and you had to wait on line at the counter to even hope to get it every morning. I started reloading soon after.

Reloading always saves you money, even in 9MM. $13 per hundred beats $20 of store bought. My equipment has already paid for itself and I am immune to the next drought. One pound of powder will load me nearly 2000 Rounds.
Reply With Quote
  #28  
Old 10-14-2017, 11:48 AM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

I reload 9mm for about 11c per at todays prices. With a good progressive, 400rds an hour min is very easy. So yes, that is substantial savings vs cheap factory, especially if you shoot a lot.
For powder/primers, PowderValley, Grafs, Midsouth, Natchez, Wideners, all good to go. For bullets, Xtreme, Berrys, RMR for plated. Bayou, Missouri for coated. Precision Delta for jacketed. If your local guy has decent prices, go there, save HM & shipping. If not order at least 10 units powder/primers to spread hm. A unit is 1k primers or 1# of powder.
__________________
NRA Cert. Inst. IDPA CSO

Last edited by fredj338; 10-14-2017 at 11:54 AM.
Reply With Quote
The Following User Likes This Post:
  #29  
Old 10-14-2017, 12:12 PM
GeoJelly GeoJelly is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Oct 2000
Location: NOVA
Posts: 1,380
Likes: 5,580
Liked 1,378 Times in 578 Posts
Default

Just thought I'd throw one idea onto the plate here - I don't get out to shoot much so I use a Lee hand press for my low-volume set up. One thing that I do (please feel free to laugh!) is take a photo once I've put powder in a batch of primed brass ... sometimes as few as 10 rounds to test a load. Then, I can go back later on - usually the next day - and re-check that I had powder in all the cases ... and no double-loads. My biggest concern is a no-powder case - since I use Power Pistol and a double-charge would be obvious. I dump the photos after I've fired the ammo. It's peace of mind for me since I am easily distracted - and so far, no surprises at the range ...

Understand, this does not apply to the high-volume/progressive reloaders out there.

Last edited by GeoJelly; 10-15-2017 at 06:58 PM. Reason: Spelling and grammar, as usual
Reply With Quote
The Following User Likes This Post:
  #30  
Old 10-14-2017, 12:43 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

If your gun(s) have standard rifling, lead bullets are much less expensive than copper jacketed. Buy in bulk.
Reply With Quote
  #31  
Old 10-14-2017, 05:58 PM
gwpercle's Avatar
gwpercle gwpercle is online now
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,390
Liked 8,045 Times in 3,651 Posts
Default

Quote:
Originally Posted by GeoJelly View Post
Just thought I'd throw one idea onto the plate here - I don't get out to shoot much so I use a Lee hand press for my low-volume set up. One thing that I do (please feel free to laugh!) is take a photo once I've put powder in a batch of primed brass ... sometimes as few as 10 rounds to test a load. Then, I can go back later on - usually the next day - and re-check that I had powder in all the cases ... and no double-loads. My biggest concern is a no-powder case - since I use Power Pistol and a double-charge would be obvious. I dump the photos after I've fired the ammo. It's peace of mind for me since I am easily distracted - and so far, no surprises at the range ...

Understand, this does not apply to the high-volume/progressive reloaders out there.
I'm not laughing !
Charging cases is the one aspect of this hobby that you can't be too careful it's the part that you have to get right.

I charge a case and check each 3 separate times before I seat the bullet with a hand press.
I haven't moved to progressives because I want to see the powder in the case and then double check again.
Very early in my learning how , I missed charging a case....bullet stuck in the forcing cone tying up the revolver, I was lucky !....happened 49 years ago but I learned...watch the powder !
Gary
Reply With Quote
The Following User Likes This Post:
  #32  
Old 10-15-2017, 11:08 AM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

Quote:
Originally Posted by gwpercle View Post
I'm not laughing !
Charging cases is the one aspect of this hobby that you can't be too careful it's the part that you have to get right.

I charge a case and check each 3 separate times before I seat the bullet with a hand press.
I haven't moved to progressives because I want to see the powder in the case and then double check again.
Very early in my learning how , I missed charging a case....bullet stuck in the forcing cone tying up the revolver, I was lucky !....happened 49 years ago but I learned...watch the powder !
Gary
There have probably been just as many squibs & doubles using loading blobks & ss press as progressives. Its the technique not the tool. I look into every case prior to placing a bullet. To me, safer than loading 50-100 in a block & trying to make sure all cases are charged correctly.
__________________
NRA Cert. Inst. IDPA CSO
Reply With Quote
The Following 3 Users Like Post:
  #33  
Old 10-15-2017, 11:19 AM
Carrier Carrier is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jul 2014
Posts: 375
Likes: 87
Liked 210 Times in 112 Posts
Default

I've had several close calls with powder no or double charge with single stage press and none with my progressive. For me it is far easier to make a mistake with a loading block with 25 or more cases on it than the 5 cases on the LNL shell plate.
Reply With Quote
  #34  
Old 10-15-2017, 03:10 PM
H Richard's Avatar
H Richard H Richard is offline
US Veteran
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Aug 2006
Location: West Central IL
Posts: 22,758
Likes: 18,437
Liked 22,313 Times in 8,245 Posts
Default

Your most important item is the "Loading Manual", and use several of them from the different powder manufacturers. And, "read" them.
__________________
H Richard
SWCA1967 SWHF244
Reply With Quote
The Following User Likes This Post:
  #35  
Old 10-15-2017, 03:26 PM
Mistered's Avatar
Mistered Mistered is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Dec 2016
Location: Wickiup Junction, OR
Posts: 874
Likes: 11
Liked 1,134 Times in 461 Posts
Default

Quote:
Your most important item is the "Loading Manual", and use several of them from the different powder manufacturers. And, "read" them.
I agree! And maybe the most important of all - Reloading should be taken up as an extension of your interest in shooting and firearms, and not as just a chore to save money. As previously stated you will save (eventually after initial costs are 'absorbed') but the ability to tailor ammo to your own needs or for better performance in your guns is priceless. Also once you get some supplies built up you will always have a ready supply of ammo whenever you want - this is what saved me on the first, and the latest go around of ammo availability which I only noticed when I saw the empty shelves, but was not affected by it. You do however need to understand reloading is a science as well as a hobby and requires dedicated concentration, reading and follow up study and, as stated before, you need to have the patience to perform repetitive tasks while maintaining a serious attention to detail. Reloading is not for everyone and you should find someone who does so you can assist and give it a try before investing in equipment.
Reply With Quote
The Following 2 Users Like Post:
  #36  
Old 10-15-2017, 05:13 PM
PPCSHOOTER PPCSHOOTER is offline
Member
reloading a 9mm reloading a 9mm  
Join Date: Jan 2005
Location: IL
Posts: 1,205
Likes: 9
Liked 673 Times in 272 Posts
Default

Quote:
Originally Posted by blujax01 View Post
I just noticed your location. Forget the Internet.

Go here: 404 Not Found

Seriously.
A YES TO THIS ADVICE. A GREAT PLACE TO DEAL WITH. JP
Reply With Quote
  #37  
Old 10-15-2017, 07:46 PM
tommy F tommy F is offline
Member
reloading a 9mm  
Join Date: Jun 2007
Posts: 702
Likes: 1,360
Liked 122 Times in 66 Posts
Default

Getting ready to retire and shooting more 9m then ever. Thinking of adding a Dillon Square deal set up for 9m. Currently buying from Freedomunitions
__________________
Tommy

Last edited by tommy F; 10-15-2017 at 07:49 PM.
Reply With Quote
  #38  
Old 10-15-2017, 09:57 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

Quote:
Originally Posted by GranDoug View Post
try to purchase your powder and primers in a local gun store for a couple of reaseons:
1) good advice on a specific load instead of digging it out of a reloading manual, BUT the advice of getting a copy of The ABC's of Reloading is good advice, just as a refresher.
2) You will save a lot not having to pay the shipping for powder and primers. The premium is costly. If you live in an area without a gun shop, or big box sporting goods store, you'll have to bite the bullet (sorry) and order.
Never seen anyone in a gunshop that knew poop aout reloading. Stick to good manuals.
If you only buy 1000 primers & a # of powder, local is best, even if the prices are retail. For most of us, ordering online, even paying hm & SH, saves a few $$ & i dont have to drive an hour each way to over pay for powder/primers. 8 units is about the break even point. Keep in mind you pay sales tax in most states buying local.
Example, 8# of WST local, after paying sales tax, cost me $8 more vs buying it from PowderValley & paying HM/SH. Throw in some primers, saving even more. Dont load a lot, buddy system works.
__________________
NRA Cert. Inst. IDPA CSO

Last edited by fredj338; 10-15-2017 at 09:59 PM.
Reply With Quote
  #39  
Old 10-15-2017, 10:23 PM
Mistered's Avatar
Mistered Mistered is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Dec 2016
Location: Wickiup Junction, OR
Posts: 874
Likes: 11
Liked 1,134 Times in 461 Posts
Default

Quote:
Never seen anyone in a gunshop that knew poop about reloading. Stick to good manuals.
Yep - it is rare - Ditto the manual or a KNOWN and TRUSTED friend who is already a seasoned reloader.
Find a local retailer for components. Even if you pay a buck or two more it's better to be able to see and identify what it is you are buying to get started until you learn and recognize components you will use again.
Start slow and follow the manual. Don't think you need to go for 'volume' but concentrate on the procedures and double check yourself along the way. Read (and re-read) the manual several times before you start. You will no doubt find things you overlooked the first time.
Proceed ONE STEP AT A TIME - eventually you will develop a system that works for you for all procedures and when you do try to stick to it and only make changes as they benefit you and/or your accuracy and safety.
Last but not least - a range report on your first reloads!
Reply With Quote
The Following User Likes This Post:
  #40  
Old 11-15-2017, 02:39 PM
Fishslayer Fishslayer is offline
US Veteran
Absent Comrade
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 9,238
Likes: 11,531
Liked 11,249 Times in 3,916 Posts
Default

Quote:
Originally Posted by flyrobb View Post
I wonder after 5 years if the OP ever started reloading
I started my 10 day wait (Kalifornistan) on a Ruger SR1911 at a black rifle shop on the 15th of that month. Due to the holidays I couldn't actually pick it up til the 2nd or 3rd of January. The walls had been completely stripped of black rifles. M855 was going for 1$ a round!
Reply With Quote
  #41  
Old 11-15-2017, 03:53 PM
JimBianchi's Avatar
JimBianchi JimBianchi is offline
Member
reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm reloading a 9mm  
Join Date: Mar 2017
Posts: 193
Likes: 75
Liked 274 Times in 104 Posts
Default

Three years, I bought my initial equipment from ebay, gun.deals, and Red's.

I also later bought my wet tumbler from Amazon.

After that I bought my first load of power/primers from Power valley. I got $500 worth to help mitigate hazmat fees. (10K SPP primers and a lot of Power Pistol!)

Then i found primers and powder locally at fair price nd haven;t had to buy again online.
__________________
USAF, Ret.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reloading the .40 S&W epj Reloading 42 11-17-2017 05:02 PM
Hodgdon Reloading Data Center VS Hornady Reloading Handbook gsparesa Reloading 48 02-10-2013 04:50 PM
Reloading 38/357 PARTSGUY53 Reloading 8 01-19-2013 02:54 PM
reloading the 12 Ga. Nevada Ed Reloading 2 01-17-2013 10:44 PM
Need help with reading the reloading chart in Lee's Modern Reloading book Gorenut Reloading 20 11-28-2012 11:51 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:33 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)