Need to load some nine for my Sons two new Shield's. Any problems loading for these guns? Don't have one of the guns on hand as he is in Alaska at the moment. THANKS!!

Same as any other gun except you can't as you don't have the barrel!

__________________
Still Running Against the Wind

I've shot my reloads through my shield 9, no problems. Used Xtreme 124g plated RN, oal 1.14.

I have shot several hundred reloaded rounds through my .40 shield without failures to feed or eject. I ran a hundred factory rounds (box of 165 and 180 gr) through it first then loaded both 165 and 180 gr plated bullets to match factory OAL length. You should of course begin with published start loads and work up but for reference I have found that 4.2 gr HP38 is very soft recoil and very accurate out of the shield.

Hope this helps
OG03

__________________
Shield 40&9, BG, P1345, G23/19

4.2 HP38 is also what I'm using . I set it up for my M&P FS 9, but also works fine in my Shield.

115 nosler JHP 6 grains of power pistol at 1.20 OAL