Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 01-06-2014, 01:10 PM
retired2006 retired2006 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jan 2007
Location: SE Kansas
Posts: 649
Likes: 4
Liked 159 Times in 105 Posts
Default Reloading 40 S&W ?

I have never owned a 40S&W, and I am thinking about getting a M&P Pro 5".
My question for those of you who reload 40S&W, is it an easy cartridge to reload ?
I would like to use cast bullets, and want to load target loads (reduced velocity).
Is the 40S&W like the 45acp, which is easy to reload with good results, or more like the 9mm, which I find to be hard to load and get good accuracy?
Any suggestions as to good bullet weights, styles ?
I usually load Missouri Bullet Company bullets.

Thanks
John
Reply With Quote
  #2  
Old 01-06-2014, 01:13 PM
dkelly27 dkelly27 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Aug 2012
Posts: 150
Likes: 14
Liked 66 Times in 38 Posts
Default

Easy to reload just like the 45 acp. Just pay attention to what your doing.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 01-06-2014, 01:31 PM
S&W1006 S&W1006 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: May 2009
Location: Mooresville NC
Posts: 598
Likes: 234
Liked 249 Times in 131 Posts
Default

Yes it is easy to load and downloads are not a problem. The biggest problem I have ran into is most commercial lead bullet manufacturers make all the .40 bullets hard for higher velocity. That isn't a problem until you make some powder puff loads and you get leading because the bullet doesn't expand properly to fit the bore. I found switching powders solved this problem for me. My buddy had the same problem with .45 but it is easier to find softer .45 bullets for target velocities.

Missouri makes good .40 bullets but they are hard and Dardas cast bullets also make good cast bullets.
Reply With Quote
  #4  
Old 01-06-2014, 02:28 PM
ILLWIND ILLWIND is offline
Member
Reloading 40 S&W ?  
Join Date: Feb 2004
Location: Western Wisconsin
Posts: 337
Likes: 181
Liked 98 Times in 64 Posts
Thumbs up

I cast my own (Lee 180gr TC-Flat point) and use AA#5 powder. They are great loads for my 4053/4014; they aren't loaded too hot...825/850fps. If you buy range brass for reloading, make sure there is no Glock brass. Their brass is oversized at the base and cannot be resized by normal means. (I found out the hard way).
Flare the case enough so that it doesn't shave lead when seating bullet and a good crimp. Other than that, they seem to be just as easy as any other cartridge.
Reply With Quote
  #5  
Old 01-06-2014, 03:07 PM
N1YDP N1YDP is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jan 2014
Posts: 11
Likes: 0
Liked 0 Times in 0 Posts
Default

the only powder i can find here is red dot.guess i will have to give it a try.i'm using 145 gr. lead flat nose.i will start out with 5gr. and see how that goes.
Reply With Quote
  #6  
Old 01-06-2014, 03:50 PM
OKFC05 OKFC05 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,158
Likes: 3,605
Liked 5,199 Times in 2,172 Posts
Default

The only problem I've found with .40 S&W loading is where you get your brass. If you buy new brass, and only shoot it in your M&P, no problem.
If you shoot range trash brass shot in who knows what, expect to get some overexpanded heads that an ordinary die will not size down. Then you can either use a push-through sizer or discard the brass. In addition to older Glocks, many USPSA guns have fat chambers and can overexpand the case heads.

I load 180 gr bullets, and use HP38 for lead bullets. If you load down too much, your M&P will not eject properly, and you will need to get a reduced power ISMI recoil spring from Brownells.
__________________
Science plus Art

Last edited by OKFC05; 01-06-2014 at 03:52 PM.
Reply With Quote
  #7  
Old 01-06-2014, 04:14 PM
Engineer1911's Avatar
Engineer1911 Engineer1911 is offline
US Veteran
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Aug 2007
Location: Augusta, GA
Posts: 6,113
Likes: 6,644
Liked 6,156 Times in 2,666 Posts
Default

Successful reloading 40 S&W ends with a Lee Carbide Factory Crimp Die. 95% of my 40 S&W is once fired from Glocks and I have never had a chambering problem after I bought the LCFC die. I have one for 9 MM, 38/357, 40 S&W, 44 mag, and 45 acp. I use Dillon 550 progressive press.
__________________
S&WHF 366
Reply With Quote
The Following 3 Users Like Post:
  #8  
Old 01-07-2014, 07:28 PM
roundgunner's Avatar
roundgunner roundgunner is offline
US Veteran
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Mar 2004
Location: Rural, CT
Posts: 1,721
Likes: 578
Liked 1,390 Times in 324 Posts
Default

I think the 40 gives me less hassle than any other in my Dillon 650.
I run 180 TC cast and make some very light and some almost full power but not quite. 965 fps.
__________________
Shoot fast & live long
Warren
Reply With Quote
  #9  
Old 01-07-2014, 09:41 PM
bedbugbilly bedbugbilly is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Nov 2010
Posts: 381
Likes: 0
Liked 153 Times in 88 Posts
Default

Not trying to steal thread - but I'm also thinking of getting a 40 S& W and adding that cartridge to my reloading. I can easily get once shot police brass from a neighbor of mine who offered it to me anytime I wanted it. I've never fired a 40 but have watched others. Not sure of the pistol yet - probably either a Smith or a Ruger since I have an SR9 that love my reloads. Anyway . . . what size primer does the 40 use? Small pistol the same as 9mm?

I use the Lee 4 die set for my 9mm and cast my own - I have had great luck with the dies and like the FCD as well so I'm probably going to go that route with the 40.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 01-07-2014, 09:59 PM
x10x10's Avatar
x10x10 x10x10 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jan 2013
Posts: 62
Likes: 0
Liked 25 Times in 13 Posts
Default

40 brass seems to be pretty easy to get and the small pistol primer is correct.

I've loaded a bunch of the 175 TC and 175 SWC and the 180 SWC to great success Like many I have to use the powder that I can get, I concentrate on W231 and Clay's and really like it, At one 3 day training event I shot 1700 rounds in 3 days after the second day I had to clean and all things considering leading was minimal

I did use some autocomp and it just seemed very loud in relationship to other loadings, I had some flyers that I couldn't explain, I didnt use enough of it to blame the powder or if it was conditions for the couple days that I shot with it. I won't knock the powder but I would pick my 231 over autocomp.

All in all, I put the easiest calibers to load for as 38, 40, and 45 acp with now rank among those
Reply With Quote
  #11  
Old 01-07-2014, 10:14 PM
jepp2 jepp2 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Feb 2010
Location: Rocky Mtns, CO
Posts: 986
Likes: 19
Liked 214 Times in 141 Posts
Default

Quote:
I would like to use cast bullets, and want to load target loads (reduced velocity).
I find the 40 to be easier to reload than the 9mm's. Just a little bigger case to handle. Less variation of OAL of loads. I would suggest a slower powder than Red Dot.

For lead a couple of things to keep in mind. I don't know of any commercial casters that have any softer lead bullets. All are 16 to 18 BHN. On my M&P and my Lone Wolf barrels, they all slug >.402", so I end up using .403" diameter. Not everyone will size that large. Dardas does.

Hard lead bullets that are undersize isn't a good recipe.
Reply With Quote
  #12  
Old 01-07-2014, 10:14 PM
johnnymg's Avatar
johnnymg johnnymg is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jan 2013
Location: Az
Posts: 67
Likes: 23
Liked 8 Times in 8 Posts
Default

Quote:
Originally Posted by retired2006 View Post
I have never owned a 40S&W, and I am thinking about getting a M&P Pro 5".
My question for those of you who reload 40S&W, is it an easy cartridge to reload ?
I would like to use cast bullets, and want to load target loads (reduced velocity).
Is the 40S&W like the 45acp, which is easy to reload with good results, or more like the 9mm, which I find to be hard to load and get good accuracy?
Any suggestions as to good bullet weights, styles ?
I usually load Missouri Bullet Company bullets.

Thanks
John
YES, the 40 is "easy" to reload. I've had excellent results with 'Black' bullets and 231 or Universal. If it was more available I'd say stick with 231 as it seems to work the best for light-heavy loads. Universal seems to only perform well (for me) at the heavy end of things.

cheers
JohnG
Reply With Quote
  #13  
Old 01-07-2014, 10:23 PM
Fuzzyhead Fuzzyhead is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jan 2014
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

What do you think the average cost of 1,000 rounds is with reloading .40 S&W? Not including the initial equipment purchase.


Sent from my iPhone using Tapatalk
Reply With Quote
  #14  
Old 01-08-2014, 01:15 AM
Steelhead's Avatar
Steelhead Steelhead is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Feb 2010
Location: Central Wa
Posts: 49
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by Fuzzyhead View Post
What do you think the average cost of 1,000 rounds is with reloading .40 S&W? Not including the initial equipment purchase.


Sent from my iPhone using Tapatalk
I'm at about $125 currently per 1000.
Reply With Quote
  #15  
Old 01-08-2014, 01:36 AM
J. R. WEEMS J. R. WEEMS is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Nov 2010
Location: WINCHESTER, VIRGINIA
Posts: 3,356
Likes: 4,437
Liked 4,433 Times in 1,463 Posts
Smile

Quote:
Originally Posted by Fuzzyhead View Post
What do you think the average cost of 1,000 rounds is with reloading .40 S&W? Not including the initial equipment purchase.


Sent from my iPhone using Tapatalk
While I haven't loaded any as of yet, I have been gathering components for years, just in case. A couple years ago I picked up a SIG 250C and will load for it/357SIG as well. I expect my cost to be less than $5.00 per box of fifty.
Reply With Quote
  #16  
Old 01-08-2014, 07:56 AM
Engineer1911's Avatar
Engineer1911 Engineer1911 is offline
US Veteran
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Aug 2007
Location: Augusta, GA
Posts: 6,113
Likes: 6,644
Liked 6,156 Times in 2,666 Posts
Default

Simple math: 1# powder, 1,000 primers, bullet cost = low of $65 with home made cast bullets to $150 with store bought bullets. This based on free range brass.

Now if you have pre-Obama powder and primers, cost ~$35 per thousand with home cast bullets. Boy Scouts WIN -- be prepared !
__________________
S&WHF 366
Reply With Quote
  #17  
Old 01-08-2014, 08:52 AM
Fuzzyhead Fuzzyhead is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jan 2014
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

Quote:
Originally Posted by Steelhead View Post
I'm at about $125 currently per 1000.

Wow! I need to start reloading!


Sent from my iPhone using Tapatalk
Reply With Quote
  #18  
Old 01-08-2014, 08:52 AM
Fuzzyhead Fuzzyhead is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jan 2014
Posts: 12
Likes: 0
Liked 1 Time in 1 Post
Default

Thanks for the info guys.


Sent from my iPhone using Tapatalk
Reply With Quote
  #19  
Old 03-11-2018, 05:18 PM
rush65 rush65 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Mar 2018
Location: utah
Posts: 3
Likes: 3
Liked 2 Times in 1 Post
Default

Quote:
Originally Posted by bedbugbilly View Post
Not trying to steal thread - but I'm also thinking of getting a 40 S& W and adding that cartridge to my reloading. I can easily get once shot police brass from a neighbor of mine who offered it to me anytime I wanted it. I've never fired a 40 but have watched others. Not sure of the pistol yet - probably either a Smith or a Ruger since I have an SR9 that love my reloads. Anyway . . . what size primer does the 40 use? Small pistol the same as 9mm?

I use the Lee 4 die set for my 9mm and cast my own - I have had great luck with the dies and like the FCD as well so I'm probably going to go that route with the 40.
i too use a Lee tl175 grain cast bullet with a 4 die set. my pet load is 5.8 grains of unique in my s&w m&p 2.0 .40 compact. A very accurate and pleasant to shoot load.
Reply With Quote
  #20  
Old 03-11-2018, 05:42 PM
Abflyboy Abflyboy is offline
Member
 
Join Date: Jan 2009
Posts: 338
Likes: 1,109
Liked 255 Times in 131 Posts
Default

Quote:
Originally Posted by Fuzzyhead View Post
What do you think the average cost of 1,000 rounds is with reloading .40 S&W? Not including the initial equipment purchase.


Sent from my iPhone using Tapatalk
I am at $100 per 1000 rounds utilizing range brass, plated bullets and light target loads that make major power factor. I could probably trim that down some more by using coated bullets but it's been a bit of a long road getting a good load developed that doesn't have issues.

If I step up to XTP's at max velocity in sorted FC cases, I'm at about $165-170 per 1000 rounds.
Reply With Quote
  #21  
Old 03-11-2018, 05:52 PM
serger's Avatar
serger serger is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Dec 2014
Location: North Dakota
Posts: 824
Likes: 2,268
Liked 1,180 Times in 434 Posts
Default

Hey Fuzzy,

You are deluding yourself if you think reloading is going to save
you money. What actually happens is you shoot more. Then you
reload more. Then....

It happens all the time.
__________________
never get out of the boat

Last edited by serger; 03-11-2018 at 05:52 PM. Reason: edited for brevity
Reply With Quote
The Following 3 Users Like Post:
  #22  
Old 03-11-2018, 06:35 PM
scattershot's Avatar
scattershot scattershot is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Oct 2008
Location: Denver, CO
Posts: 1,812
Likes: 166
Liked 977 Times in 489 Posts
Default

No problem loading for the .40. 175-180 cast bullet for about 850 fps. Nice easy shooting load, accurate as I am, anyway. Small pistol primers. Be aware that the .40 spikes pressure rapidly at the upper end, so be careful with hot loads.

Good luck!

Last edited by scattershot; 03-12-2018 at 08:18 PM.
Reply With Quote
  #23  
Old 03-11-2018, 10:39 PM
Rule3's Avatar
Rule3 Rule3 is online now
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Feb 2008
Location: Florida
Posts: 22,065
Likes: 10,777
Liked 15,465 Times in 6,787 Posts
Default

Why are people posting in the "present tense"

Think he has loaded any since 2014??
__________________
Still Running Against the Wind
Reply With Quote
  #24  
Old 03-13-2018, 03:45 PM
rsrocket1 rsrocket1 is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jun 2011
Location: DFW Texas, a free state!
Posts: 755
Likes: 42
Liked 326 Times in 197 Posts
Default

I'm at $40/1000 rounds using $1/# lead, $20/lb powder purchased in 8# jugs and $30/k primers. Brass is free and plentiful at my range so I often come home with more cases than I shoot.

Red Dot is a very good powder for low recoil slow to mid range loads in 180g. 2.7g will get you about 760 fps and feel just like a 9mm round. 4g will get you in the 900 fps range which is a great feeling 40 round. I prefer closer to 1000 fps so my pet load is 5.6g BE-86 but thats simply because Red Dot was so scarce during the big powder shortage a couple of years ago and I committed to an 8# jug of BE-86.

40 is a purely straight walled case unlike the tapered 9 and many more guns are consistenly 0.400" grooved unlike 9's which can be anywhere from 0.355" to 0.358"+
Reply With Quote
  #25  
Old 03-20-2018, 12:52 PM
yeti's Avatar
yeti yeti is offline
US Veteran
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Mar 2012
Location: Illinois
Posts: 2,350
Likes: 2,854
Liked 2,765 Times in 1,160 Posts
Default

Quote:
Originally Posted by Rule3 View Post
Think he has loaded any since 2014??
Zombie thread. It liiiives! Since Rush65 resurrected it...

40S&W is quite pleasant to reload and it can be loaded Minor PF successfully for steel matches and Major for IDPA/USPSA or hotter for defensive loads. It is a pretty versatile round with a decent selection of coated, plated, lubed & jacketed bullet weights & profiles available. You can load it longer than SAAMI for 1911/2011's or run it shorter for CZ's. Ya, I'm a fan. Not to mention you can score really attractive deals now (2018 ) on good used pistols in 40S&W.
Reply With Quote
  #26  
Old 03-20-2018, 01:02 PM
RGVshooter RGVshooter is offline
Banned
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jun 2016
Location: USA
Posts: 1,285
Likes: 1,112
Liked 1,609 Times in 660 Posts
Default

I reload 40s&w for target shooting & steel plates. I download my 40's. meaning that they're nowhere near full power. This is my favorite load for 40s&w.

Hornady 180gr XTP
3.2gr Titegroup
OAL (overall length of cartridge) 1.135"

This load gives an average fps of 738 with a power factor of 132.

Recoil feels like a whimpy 9mm but still good enough to knock over bowling pins and ring steel. Accuracy is very good out of a Glock 23.
Reply With Quote
  #27  
Old 03-20-2018, 03:09 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

I find all the service calibers the same for reloading, except for the 357sig. It requires a little more attention to flare & crimp & most importantly bullet selection. 9, 40 & 45 all load the same.
__________________
NRA Cert. Inst. IDPA CSO
Reply With Quote
  #28  
Old 03-20-2018, 05:53 PM
SMSgt's Avatar
SMSgt SMSgt is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Jul 2010
Location: Florida
Posts: 6,555
Likes: 3,343
Liked 9,152 Times in 3,432 Posts
Default

I don't find 9mm to be any different to reload than anything else. What's with that?
Reply With Quote
  #29  
Old 03-20-2018, 09:27 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 30,907
Likes: 41,495
Liked 29,149 Times in 13,779 Posts
Default I'd say there are some differences.....

Quote:
Originally Posted by SMSgt View Post
I don't find 9mm to be any different to reload than anything else. What's with that?
I'd say that the 9mm has a few differences from revolvers, seating depth and crimp are critical and a bunch of semi autos are pickier on ammo than the same number of revolvers.Any shape of bullet can be loaded and fired in a revolver but not always so in semis.
__________________
"He was kinda funny lookin'"

Last edited by rwsmith; 03-20-2018 at 09:30 PM.
Reply With Quote
  #30  
Old 03-21-2018, 10:33 AM
yeti's Avatar
yeti yeti is offline
US Veteran
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Mar 2012
Location: Illinois
Posts: 2,350
Likes: 2,854
Liked 2,765 Times in 1,160 Posts
Default

The taper and freebore on production 9mm pistol chambers seems to be kind of diverse. Much more so than other calibers.
Some bullet styles won't play nice with some chambers at perfectly reasonable OAL's.
Reply With Quote
  #31  
Old 04-05-2018, 08:00 AM
sparkyvega's Avatar
sparkyvega sparkyvega is offline
Member
Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ? Reloading 40 S&W ?  
Join Date: Apr 2018
Location: Texas
Posts: 258
Likes: 1,389
Liked 233 Times in 117 Posts
Default

Quote:
Originally Posted by SMSgt View Post
I don't find 9mm to be any different to reload than anything else. What's with that?
I agree; for me, resizing straight-walled is a little smoother/easier than tapered.

Like yeti said, quite pleasant to load.
__________________
Μολὼν λαβέ
NRA Life Member
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reloading the .40 S&W epj Reloading 42 11-17-2017 05:02 PM
Hodgdon Reloading Data Center VS Hornady Reloading Handbook gsparesa Reloading 48 02-10-2013 04:50 PM
Reloading 38/357 PARTSGUY53 Reloading 8 01-19-2013 02:54 PM
reloading the 12 Ga. Nevada Ed Reloading 2 01-17-2013 10:44 PM
Need help with reading the reloading chart in Lee's Modern Reloading book Gorenut Reloading 20 11-28-2012 11:51 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 02:51 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)