Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 08-30-2015, 05:43 PM
Green Frog Green Frog is offline
Member
Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets  
Join Date: Jul 2010
Location: Central VA
Posts: 8,598
Likes: 1,551
Liked 9,322 Times in 4,182 Posts
Default Loading Data for 32 Plated Bullets

At the gun show in Roanoke, VA this weekend, I got a bag of 188 Ranier plated bullets... they are 100 grain, .312" diameter hollow points. The Ranier website says to use published load data (for jacketed bullets) from the powder manufacturer, but I can't find much for a 100 grain bullet in 327 Fed Mag. Is anybody loading this bullet with say, Accurate #7 or #9? How about WW 231 or 296? Any and all tested loads you are willing to share would be most highly appreciated.

Froggie
Reply With Quote
  #2  
Old 08-30-2015, 06:14 PM
Alk8944's Avatar
Alk8944 Alk8944 is online now
Member
Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,617
Likes: 1,554
Liked 8,615 Times in 3,452 Posts
Default

From Hodgdon's site. took all oof 30 seconds!

BULLET WEIGHT
100 GR. HDY XTP
Starting Loads Maximum Loads
Manufacturer Powder Bullet Diam.
C.O.L.
Grs.
Vel. (ft/s)
Pressure
Grs.
Vel. (ft/s)
Pressure
Hodgdon Lil'Gun .312" 1.450" 12.7 1,347 25,600 PSI 14.0 1,431 27,900 PSI
Hodgdon Longshot .312" 1.450" 6.0 1,287 35,400 PSI 6.7 1,400 43,500 PSI
Hodgdon HS-6 .312" 1.450" 7.0 1,289 34,100 PSI 7.7 1,384 42,000 PSI
Hodgdon CFE Pistol .312" 1.450" 5.9 1,298 31,800 PSI 7.0 1,451 42,300 PSI
Hodgdon Universal .312" 1.450" 4.5 1,087 28,000 PSI 5.4 1,250 40,800 PSI
__________________
Gunsmithing since 1961
Reply With Quote
  #3  
Old 08-30-2015, 07:55 PM
Green Frog Green Frog is offline
Member
Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets  
Join Date: Jul 2010
Location: Central VA
Posts: 8,598
Likes: 1,551
Liked 9,322 Times in 4,182 Posts
Default

Thanks, Alk8944. I must admit I missed the Hodgdon site since I was looking for data for powder I already have (in this day and time, that's an important consideration!) I'm still hoping I can find data for one of the powders I have on hand, but I may have to go look for some CFE Pistol or Li'l Gun.

Froggie
Reply With Quote
  #4  
Old 08-30-2015, 08:16 PM
Alk8944's Avatar
Alk8944 Alk8944 is online now
Member
Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 8,617
Likes: 1,554
Liked 8,615 Times in 3,452 Posts
Default

Well, IMR and Winchester are on the Hodgdon site too.

Hodgdon - The Gun Powder People

And Alliant:

Alliant Powder - Home

And Accurate:

Accurate Powders

It really isn't that difficult.
__________________
Gunsmithing since 1961
Reply With Quote
  #5  
Old 08-30-2015, 09:04 PM
Green Frog Green Frog is offline
Member
Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets  
Join Date: Jul 2010
Location: Central VA
Posts: 8,598
Likes: 1,551
Liked 9,322 Times in 4,182 Posts
Default

Thanks again. I was looking for this stuff on my iPad and didn't navigate it very well. I'm still looking for some data for a couple of other powders, but you got me enough info to make a good start.

Regards,
Froggie
Reply With Quote
The Following User Likes This Post:
  #6  
Old 08-30-2015, 09:24 PM
george_lehr george_lehr is offline
Member
Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets  
Join Date: Jan 2011
Location: CT
Posts: 592
Likes: 1,051
Liked 731 Times in 216 Posts
Default

Froggie,
For information, in addition to what's on the powder company sites, the February 2015 issue of "Handloader" magazine published .327 Federal Magnum loads developed using a Ruger 7 1/2" barreled Single Seven. There's data for 100 gr. Speer Gold Dot HP, 100 gr. Hornady XTP, A-7 and A-9. If you're interested, give me your email address and I'll send you that data.
George
Reply With Quote
  #7  
Old 08-31-2015, 08:11 AM
Green Frog Green Frog is offline
Member
Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets Loading Data for 32 Plated Bullets  
Join Date: Jul 2010
Location: Central VA
Posts: 8,598
Likes: 1,551
Liked 9,322 Times in 4,182 Posts
Default

Thanks George. I obviously started typing before I started thinking... I do that sometimes. I was so pleased to find these plated bullets, which I have never reloaded before that I didn't think to go back to the pages I had gleaned for lead bullet data. That article will be a good one and I even have a digital copy of it sent to me by Dale53 when it was first published. Thanks to both of you who responded with such spot-on info, and now I'll be able to try to get something going on the bench in the next day or two.

Froggie
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Loading data for copper plated bullets skrazo Reloading 27 02-07-2014 01:14 AM
Rainier .40 135gr plated loading data jim02ss Reloading 5 05-02-2013 04:03 PM
Load Data for Plated Bullets Spartikus Reloading 5 08-23-2012 03:23 PM
Plated Bullets loading advice bobbyd Reloading 9 07-10-2010 06:42 PM
Which data to use for plated bullets? PDL Reloading 5 12-27-2009 04:26 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 03:51 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)