Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 12-10-2015, 12:53 PM
S&W HE's Avatar
S&W HE S&W HE is offline
SWCA Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Mar 2011
Location: Nevada, USA section
Posts: 334
Likes: 343
Liked 126 Times in 58 Posts
Default .38 Special Red Dot Loads - Update

An old Hercules loading manual shows 4.0 grains of Red Dot under a 158 grain lead round nose projectile. It also shows 4.0 grains for jacketed projectiles.

I've been using this 4.0gr/158gr hard cast lead and plated bullet load with no over pressure indications in K frame revolvers for many years.

Todays Alliant recipes are 3.4 grains for a 158 grain .38 special and 3.8 grains for a .38 special +P load.

Are today's loads that lawyered up or have you seen pressure indications?

Update: As in the past both the lead and plated 4.0gr/158gr Alliant Red Dot loads proved accurate with no over-pressure indications when shot from two Model 66 S&Ws -1974 & 1984 vintage - K frames.
__________________
Dave
SWCA #2465

Last edited by S&W HE; 12-11-2015 at 02:33 AM.
Reply With Quote
  #2  
Old 12-10-2015, 01:09 PM
NYlakesider's Avatar
NYlakesider NYlakesider is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Apr 2012
Location: Northern NY-AdirondackMts
Posts: 7,996
Likes: 12,855
Liked 13,379 Times in 5,042 Posts
Default

Quote:
Originally Posted by S&W HE View Post
An old Hercules loading manual shows 4.0 grains of Red Dot under a 158 grain lead round nose projectile. It also shows 4.0 grains for jacketed projectiles.

I've been using this 4.0gr/158gr hard cast lead and plated bullet load with no over pressure indications in K frame revolvers for many years.

Todays Alliant recipes are 3.4 grains for a 158 grain .38 special and 3.8 grains for a .38 special +P load.

Are today's loads that lawyered up or have you seen pressure indications?



Looking in my old Speer dated 1974 I see a few loads using red dot
3 in 148 lead wadcutter (.358 D)
1 in 158 lead semi wadcutter.(358D) They listed 3.5 to 3.9
And 1 in 110gr, 357 diameter loads
__________________
14 S&W Revs none with locks!
Reply With Quote
  #3  
Old 12-10-2015, 02:57 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
Default

There could be a minor change in powder configuration or just lot to lot variations at time of testing. If things look fine in your gun, all that matters, regardless of what book data says.
__________________
NRA Cert. Inst. IDPA CSO
Reply With Quote
  #4  
Old 12-10-2015, 03:18 PM
shotgun693 shotgun693 is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Sep 2015
Location: Texas
Posts: 497
Likes: 82
Liked 681 Times in 236 Posts
Default

I contacted the factory about a .38 spl load, to be fired in a .357, using Red Dot and a 158 gr LSWC. They recommended 5.0 gr. I do not have a .38spl to try it in and might not if I did.
Reply With Quote
  #5  
Old 12-10-2015, 10:19 PM
Yorkie Man Yorkie Man is offline
Member
 
Join Date: Sep 2008
Posts: 562
Likes: 4
Liked 260 Times in 134 Posts
Default

I use 2.5 grains of Red dot with a PD 148 HBWC and it is a very accurate load.
Reply With Quote
  #6  
Old 12-10-2015, 11:46 PM
bluetopper's Avatar
bluetopper bluetopper is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Feb 2008
Location: Northeast TX
Posts: 1,268
Likes: 614
Liked 987 Times in 409 Posts
Default

I have a Lyman manual from 1973 and it states 3.9gr of Red Dot for a 158gr lead bullet. Been shooting that load for years with wonderful results.
No need to neuter the 38 to today's standards!
__________________
Where we go one, we go all
Reply With Quote
The Following User Likes This Post:
  #7  
Old 12-11-2015, 12:47 AM
rwsmith's Avatar
rwsmith rwsmith is online now
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 30,907
Likes: 41,495
Liked 29,149 Times in 13,779 Posts
Default Unless data is known to be faulty...

Unless published data is known to be faulty, I don't hesitate to use it. S&Ws in good shape are not like junkers that they have to allow for. If I have a problem I expect it would be from shooting too many hot loads (which I don't do except a cylinder for 'fun) or a goof in reloading, for which there is no help whether it's a strong gun or not.

I found a +P load for 125 gr jph .38 special in an old Sierra book. The MINIMUM load was .4 of a grain (I think it was Unique) above the recommended 6 grain maximum nowadays. I tried a starting load and WOW. I didn't care to work toward the maximum load of 7 grains. I didn't think that it was dangerous, but I thought I'd drop back to 6.2 grains for normal use.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #8  
Old 12-11-2015, 12:58 AM
Big Cholla Big Cholla is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 3,428
Likes: 5,932
Liked 5,259 Times in 1,732 Posts
Default

Before WW 231 came out I tried several shotgun powders trying to find a cleaner burning one to use instead of Unique. I did try Red Dot for very long finding that it didn't meter very true and very small variations made for wild changes in pressure. The WW 231 data for 45 acp and 38 Super came out and I found my go to powder for years of IPSC and IDPA competition. I then found for my today's range loads that I liked Universal Clays very much. UC is now called just "Clays". I regard Clays as my clean burning modern day Unique. .............
Reply With Quote
  #9  
Old 12-11-2015, 07:38 AM
slickracer slickracer is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Oct 2012
Location: Pennsylvania
Posts: 746
Likes: 2,968
Liked 560 Times in 272 Posts
Default

Quote:
Originally Posted by Big Cholla View Post
Before WW 231 came out I tried several shotgun powders trying to find a cleaner burning one to use instead of Unique. I did try Red Dot for very long finding that it didn't meter very true and very small variations made for wild changes in pressure. The WW 231 data for 45 acp and 38 Super came out and I found my go to powder for years of IPSC and IDPA competition. I then found for my today's range loads that I liked Universal Clays very much. UC is now called just "Clays". I regard Clays as my clean burning modern day Unique. .............
Universal Clays is NOT the same powder as Clays!
Reply With Quote
The Following 4 Users Like Post:
  #10  
Old 12-11-2015, 10:48 AM
LAH LAH is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Dec 2002
Location: WV
Posts: 459
Likes: 483
Liked 343 Times in 112 Posts
Default

I'm using 3.5 grains of Promo with a 158/160 SWC with no ill effects.
__________________
Joshua 1:9
Reply With Quote
  #11  
Old 12-11-2015, 12:02 PM
SLT223's Avatar
SLT223 SLT223 is offline
Member
.38 Special Red Dot Loads - Update  
Join Date: Jan 2009
Posts: 3,304
Likes: 2,719
Liked 5,046 Times in 1,439 Posts
Default

Quote:
Originally Posted by Big Cholla View Post
Before WW 231 came out I tried several shotgun powders trying to find a cleaner burning one to use instead of Unique. I did try Red Dot for very long finding that it didn't meter very true and very small variations made for wild changes in pressure. The WW 231 data for 45 acp and 38 Super came out and I found my go to powder for years of IPSC and IDPA competition. I then found for my today's range loads that I liked Universal Clays very much. UC is now called just "Clays". I regard Clays as my clean burning modern day Unique. .............
Universal Clays and Clay are two very different products. The prior is of similar burn rate to Unique. That latter is extremely fast burning; on par with Bullseye.

I do second the use of Clays as an OUTSTANDING low velocity target load propellant. It is by far the cleanest powder I've worked with.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 12-11-2015, 01:10 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

Those old manuals had loads that went into the +P areas........
while some of the newer data is only for standard 38 special loads.

The old manuals top loading in my M19 and 686 6" barrels would get at least 890 fps with 4.0gr of Red Dot.
In my M49 snub this load just gets past the 800 fps area with the 158gr lead FBI style bullet.

If you have a 6" 38 J frame, or more...........
you might want to try a 158 Lswc with a medium crimp, cci 500 primer and just 3.5 grs of Red Dot, at 755 fps.
It out shot my long time accuracy load of Bullseye last year with just 1/2" right of POA.
Reply With Quote
  #13  
Old 12-11-2015, 01:22 PM
Big Cholla Big Cholla is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 3,428
Likes: 5,932
Liked 5,259 Times in 1,732 Posts
Default Correction!

Quote:
Originally Posted by slickracer View Post
Universal Clays is NOT the same powder as Clays!
I stand corrected. This is why I don't care to talk reloading on the internet very much. I'm just repeating a blurb I read about six months ago about the change in name of "Universal Clays" by a person that I thought knew what they were talking about. I repeated without verifying the facts. I have never even seen a jug of "Clays" as my in-house supply of UC is large enough that I will never have to purchase it again. Mea Culpa ...........
Reply With Quote
  #14  
Old 12-11-2015, 01:37 PM
old&slow old&slow is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Aug 2011
Location: central, Ohio
Posts: 1,165
Likes: 1,038
Liked 1,305 Times in 542 Posts
Default

Quote:
Originally Posted by Big Cholla View Post
I stand corrected. This is why I don't care to talk reloading on the internet very much. I'm just repeating a blurb I read about six months ago about the change in name of "Universal Clays" by a person that I thought knew what they were talking about. I repeated without verifying the facts. I have never even seen a jug of "Clays" as my in-house supply of UC is large enough that I will never have to purchase it again. Mea Culpa ...........
It was one of those very confusing ,,, and IMO not very smart ,, things done by a Mfg.
Clays ,,, Universal Clays ,, International Clays. similar names ,, different powders..
.308 Winchester and a .308 Marlin is another one that IMO was confusing..
Reply With Quote
  #15  
Old 12-11-2015, 01:37 PM
FlyFish FlyFish is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Jun 2007
Location: New Hampshire
Posts: 646
Likes: 522
Liked 968 Times in 319 Posts
Default

I believe it was just this sort of confusion that prompted Hodgdon (some might say "finally!") to drop the word "Clays" from International Clays and Universal Clays - on their website now they list Clays, International, and Universal. Smart move, I think.
Reply With Quote
The Following User Likes This Post:
  #16  
Old 12-11-2015, 02:18 PM
Big Cholla Big Cholla is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 3,428
Likes: 5,932
Liked 5,259 Times in 1,732 Posts
Default

OK, with just a little Google Foo I find that my reference got the name change exactly backwards...... In 1962 Hodgdon came out with a new powder for shotgunners called; "Clays". They quickly followed up with " International Clays and then Universal Clays. All these 'clays' floating around on labels caused some confusion (well, duh). So, Hodgdon dropped the "Clays" part of the name on both International Clays and Universal Clays. The poster I read got it wrong about which portion of the name was dropped and I made the mistake of following blindly. That is a very dangerous thing to do when it comes to reloading. I'm now firmly resolved to never again post about reloading. It is potentially just too dangerous to make mistakes in this area of being a 'gunny'.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 12-11-2015, 02:58 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

Hang in there Big guy...........

Keep posting but just leave Hodgdon powders out of it..........
Done deal.
Reply With Quote
The Following 2 Users Like Post:
  #18  
Old 12-11-2015, 08:38 PM
mtgianni mtgianni is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Feb 2007
Location: SW MT
Posts: 6,690
Likes: 10,392
Liked 5,972 Times in 2,942 Posts
Default

Quote:
Originally Posted by mike campbell View Post
This thread makes me wonder...

What "over pressure" signs do you look for in a 38 spl?.
Hard extraction, excessive expansion, primer pocket loosening and primer visuals will all give you signs before a cylinder lets go.
__________________
Front sight and squeeze
Reply With Quote
  #19  
Old 12-11-2015, 08:38 PM
Moe Mentum Moe Mentum is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Apr 2014
Location: Central Florida
Posts: 798
Likes: 582
Liked 470 Times in 273 Posts
Default

In .38 special I use 3.0 grains of Red Dot under a 158 grain plated bullet. Nice mild target load.
Reply With Quote
  #20  
Old 12-12-2015, 04:37 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

One reason that I shoot target loads 95% of the time.
Not that I don't like full loads in my 38 and 357 revolvers,
just that you never know when you might come into some bad
or weakened brass if reloading or even with new factory cases.

There can be bad cases right from the factory but this picture
shows a Factory case that was only reloaded twice with a full load with a 158gr XTP.
The bottom half ejected but I needed a pen to get the front half
to move back, out of the cylinder.
Never had it happen to a 38 case yet, just rim cracks and side splits, on weak cases.
They sit just above my PC as a reminder...........

Reply With Quote
  #21  
Old 12-12-2015, 06:42 PM
Kinman's Avatar
Kinman Kinman is offline
Member
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Jul 2010
Location: Spokantucky
Posts: 4,098
Likes: 10,349
Liked 6,901 Times in 2,335 Posts
Default

From memory I'm recalling that back in the mid 70's while I was shooting with Fairchild AFB's security guys they used a load in their service pistols that was 3.5gr of Red Dot with a 158grn hollow based wad cutter. They showed me that if I wanted to make a real "manstopper" out of that load just reverse the loading of the bullet so that the hollow base is pointed out, sure looked wicked enough. It was a very accurate load in a 6" Colt Trooper.
Reply With Quote
  #22  
Old 12-13-2015, 12:20 AM
crsides crsides is offline
US Veteran
SWCA Member
Absent Comrade
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Nov 2009
Location: upstate SC / Mtns SW Va
Posts: 4,789
Likes: 3,064
Liked 9,875 Times in 1,986 Posts
Default

Quote:
Originally Posted by Kinman View Post
From memory I'm recalling that back in the mid 70's while I was shooting with Fairchild AFB's security guys they used a load in their service pistols that was 3.5gr of Red Dot with a 158grn hollow based wad cutter. They showed me that if I wanted to make a real "manstopper" out of that load just reverse the loading of the bullet so that the hollow base is pointed out, sure looked wicked enough. It was a very accurate load in a 6" Colt Trooper.
The downside to this man stopper load - that I used to load and carry - is that penetration tests of various 38 spl loads showed that heavy clothing ( leather jacket etc) could clog the hollow point, slowing the bullet down to the point of losing the effectiveness of the round. I don't know where these tests were reported, but I do remember reading this. Hey it was on the net. Something to think about.

Charlie
Reply With Quote
  #23  
Old 12-13-2015, 03:58 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
.38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update .38 Special Red Dot Loads - Update  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

oldie but goodie on 38 special loads............
maybe for ..... "the keeper page" ?

148 HBwc loaded backwards near the bottom of the article.



Loads for Short-Barrel Handguns
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Recommendations? Easy 44 Special loads and Quality 22 LR loads dacoontz Ammo 19 05-30-2015 07:13 PM
44 special loads arjay Reloading 20 05-08-2014 12:10 PM
.44 Special Loads smousefam5 Reloading 9 11-30-2013 03:47 AM
38 Special Loads beaverislander Reloading 21 05-06-2013 10:50 AM
.38 Special loads tgwillard Reloading 15 12-02-2009 02:13 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 02:15 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)