Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 09-17-2016, 11:06 AM
slickracer slickracer is offline
Member
.357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7?  
Join Date: Oct 2012
Location: Pennsylvania
Posts: 498
Likes: 1,759
Liked 278 Times in 151 Posts
Default .357 loads with HS-7?

I have a neighbor that gave me a sealed pound of HS-7. Hodgdon no longer lists .357 loads since the powder was discontinued. Does anyone have load data for 158 grain bullets, both lead and jacketed?
Reply With Quote
  #2  
Old 09-17-2016, 01:59 PM
Calliope Calliope is offline
Member
.357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7?  
Join Date: Jul 2011
Location: On the Mississippi.
Posts: 264
Likes: 29
Liked 81 Times in 50 Posts
Default

My Speer #11 manual lists 11.2 to 12.1 grains of HS-7 with a 158 JHP in .357 with a magnum primer.
My buddy bought 8 pounds of HS-7 when it was going obsolete and one thing we learned was it needs a good crimp and a magnum primer. He had trouble with squibs & poor ignition in .38 spl with standard primers and a light crimp.
I would recommend a google search to confirm the data if you can't find printed data for HS-7.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 09-17-2016, 06:21 PM
USSR USSR is offline
Member
.357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7?  
Join Date: Nov 2010
Location: Finger Lakes Region of NY
Posts: 340
Likes: 0
Liked 142 Times in 70 Posts
Default

Hodgdon's #26 manual lists 10.0gr for both lead and jacketed 158gr bullets. Magnum primers are pretty much required with HS-7. I just bought a couple of pounds of it myself, so that is what I am doing.

Don
__________________
NRA Cert. Reloading Instructor
Reply With Quote
  #4  
Old 09-17-2016, 08:20 PM
Skeet 028 Skeet 028 is offline
Member
.357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7?  
Join Date: Feb 2010
Location: Wyoming
Posts: 1,829
Likes: 569
Liked 1,375 Times in 686 Posts
Default

If you also have some Winchester data..look at Win 571. Same powder. I have many pounds of it as I used to load it in 28 ga shotshells. I have also found it likes a good crimp and heavier bullets...Mag primers seem to work better. I more often use it in upper level 41 and 44 loads
Reply With Quote
  #5  
Old 05-13-2017, 02:04 PM
nitro-express nitro-express is offline
Member
.357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7?  
Join Date: Apr 2012
Posts: 10
Likes: 0
Liked 1 Time in 1 Post
Default

I've used 9 gr of W-W 571 (same as or similar to HS-7) with cast in the 357. Works especially well with 358156 GC. I can't remember what source I used for this data.

Lots of variance in recommended max. Also, I've used a CCI SPM for all 571 loads in the 357 Mag.

I've used it with the 44 Mag as well, with cast, and it works OK. I finally settled on a CCI 300 LP primer and 12.5 gr. Somewhere around 10.5 and you will have smokey cases, not enough pressure to seal in the chamber. 12.5 gr will give you about 1000 fps. Increasing the powder charge and the gun will start to dance. Works best with a Gas Checked bullet. My goto is a 429434 GC, at about 225 gr, an old 44-40 rifle design. I've sub'd a 429244 @ 12.5 and at 1 gr less.

W-W 571 doesn't seem to be very kind to plain based cast, 2400 works better for that.

I don't think that W-W 571 would be my first choice for the 357, or 44 Mag. but I was given about 10#, and it works well enough for 1000 fps loads. I meters well. At 9 > 13 gr a round, I'll be shooting it for a while.

Last edited by nitro-express; 05-13-2017 at 02:05 PM.
Reply With Quote
  #6  
Old 05-13-2017, 02:09 PM
Abflyboy Abflyboy is offline
Member
 
Join Date: Jan 2009
Posts: 188
Likes: 399
Liked 83 Times in 48 Posts
Default

Quote:
Originally Posted by Calliope View Post
My Speer #11 manual lists 11.2 to 12.1 grains of HS-7 with a 158 JHP in .357 with a magnum primer.
My buddy bought 8 pounds of HS-7 when it was going obsolete and one thing we learned was it needs a good crimp and a magnum primer. He had trouble with squibs & poor ignition in .38 spl with standard primers and a light crimp.
I would recommend a google search to confirm the data if you can't find printed data for HS-7.
+1 to heavy crimp and magnum primer with HS-7.
Reply With Quote
  #7  
Old 05-13-2017, 03:28 PM
muddocktor's Avatar
muddocktor muddocktor is offline
Member
.357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7? .357 loads with HS-7?  
Join Date: Oct 2014
Location: South Louisiana
Posts: 1,910
Likes: 3,109
Liked 2,170 Times in 894 Posts
Default

I used up a couple of pounds of Win 571, which is the same powder, in 357 with pretty good results. I had originally bought it in the 80's for loading 10 gauge duck and goose loads and then they did away with lead shot for hunting migratory birds. I will also recommend using magnum primers with it too.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Are todays .38 +P loads closer to .357 loads? Photoman44 Ammo 34 07-05-2016 11:07 PM
Recommendations? Easy 44 Special loads and Quality 22 LR loads dacoontz Ammo 19 05-30-2015 07:13 PM
Loads for a S&W 642 Nevada Ed Reloading 0 11-23-2014 02:20 PM
B-78 45-70 loads? Finn McCool Reloading 7 11-08-2012 11:14 AM
460 loads...440-460gr loads marine247 Reloading 1 01-15-2009 10:27 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:26 AM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)