Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #51  
Old 01-01-2017, 12:47 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default I guess I'm just being silly....

Quote:
Originally Posted by alwslate View Post
It's hard to believe that anyone who is a serious handgunner
still wants to argue the supposed vast superiority of the 230
FMJ .45 at the lumbering velocity of 830 fps over a warm 124
gr 9mm at 1200 fps. Numerous tests, including real world
shooting results indicate that there is little difference between
the two. So you hear and read all the time "where people say"
fill in the blank space here. Where you're mistaken here is in
the quality of your reading material. What isn't nonsense? The
9mm is the NATO handgun round and is likely to be so for
some time to come. Shot placement and penetration trumps
bullet dia 100% of the time. Shoot what you like and shoot
well.
I thought that I made a pretty good case in spite of the pulpy gun magazines that I read. 'True Detective' is a main source of any ideas that I may have. It is highly criticizes the 9mm NATO round.

Sorry, but I like to think and experiment. I was a mechanical designer in a research laboratory. Curiosity, questioning and experimenting are part of my nature. My reloading experience has been mostly experimental. Even if it flops, at least I will be able to say that I found out.

I never said that changes in the bullet would render shot placement less important. My idea has extra weight for adequate penetration as well as making a wound channel that is close to .6" diameter.

And yeah, NATO use a 9mm 124 gr. round all of my 9mm are loaded with it. I'm not arguing with its effectiveness, just wondering if it could be made even more effective, at least for close up work.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #52  
Old 01-01-2017, 07:04 PM
Qc Pistolero Qc Pistolero is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: May 2016
Posts: 459
Likes: 120
Liked 216 Times in 146 Posts
Default

Well,your question certainly did raise quite a few opinions;I bet you've reached your goal;having the subject developped.If I may add my 2 cents worth of rethorics about it...
While the debate 9mm vs .45ACP began a few decades ago,I think that both party having its advocates, we are far from seing the end of it.I remember reading about it in the early '70s and it still will get feelings flowing like hot lava!But while I admit that the expanding bullets have improved from a long way back,bullet expansion is still an ''if''thing.I mean,I shoot a .355 projectile and hope it will end up .452 or larger That speaks for itself.
Funny how people get their feelings tickled when the 9mm vs .45 question is raised but I bet that the same question slightly modified like .38 Spl+P vs .45 wouldn't probably get 33% of the same feedback..38 Spl and 9mm=same bullet diameter(.355 vs .357 I don't think it matters much).While the 9 will beat the heck out of and regular .38Spl load,the latter catches up quite rapidly with heavier bullets(158+gr).
Guess I might have opened another can of worms here....have I?
Qc

Last edited by Qc Pistolero; 01-01-2017 at 07:07 PM.
Reply With Quote
The Following User Likes This Post:
  #53  
Old 01-01-2017, 09:34 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default

Quote:
Originally Posted by Qc Pistolero View Post
Well,your question certainly did raise quite a few opinions;I bet you've reached your goal;having the subject developped.If I may add my 2 cents worth of rethorics about it...
While the debate 9mm vs .45ACP began a few decades ago,I think that both party having its advocates, we are far from seing the end of it.I remember reading about it in the early '70s and it still will get feelings flowing like hot lava!But while I admit that the expanding bullets have improved from a long way back,bullet expansion is still an ''if''thing.I mean,I shoot a .355 projectile and hope it will end up .452 or larger That speaks for itself.
Funny how people get their feelings tickled when the 9mm vs .45 question is raised but I bet that the same question slightly modified like .38 Spl+P vs .45 wouldn't probably get 33% of the same feedback..38 Spl and 9mm=same bullet diameter(.355 vs .357 I don't think it matters much).While the 9 will beat the heck out of and regular .38Spl load,the latter catches up quite rapidly with heavier bullets(158+gr).
Guess I might have opened another can of worms here....have I?
Qc
A few good worms don't make the whole can bad. In the video the 147 grain Gold Dot did expand about that big, so I'd expect that a 165 grain 'Gold Dot' could do the same thing if constructed for the job like the 'short barrel 135 gr. Gold Dots do. I see that they make and have data for a 180 gr. .38 bullet. And if what you say about heavier bullets approaching 9mm effectiveness MAY hold true for 9mm approaching the .45. So that is encouraging enough to work on this for a while.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #54  
Old 01-01-2017, 09:39 PM
Rpg Rpg is online now
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: May 2013
Location: Denver area
Posts: 2,246
Likes: 3,851
Liked 2,578 Times in 1,113 Posts
Default

Simplky: start with a 4
Reply With Quote
  #55  
Old 01-01-2017, 09:47 PM
venomballistics's Avatar
venomballistics venomballistics is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Aug 2007
Location: Escaped WI, Omaha NE
Posts: 7,192
Likes: 3,382
Liked 4,021 Times in 2,107 Posts
Default

Quote:
Originally Posted by rwsmith View Post
I hope that the extra expansion from a heavier bullet that is designed to 'blow up' at that velocity will make up for bore. And pretty much limiting this to close range, SD work makes the math much easier.

I think in a battle situation it should have the effective range of a .45, being that it's moving at the same velocity and it's only proportioned a little longer than a typical bullet. i think that the long 'waterline' should actually help. That's a good point though. If this is viable, it would be cool to work out the SD and BC. Most importantly I expect that it would be effective in practical, real life encounters.

I should be able to work out a profie fairly easily. And make it look like a Gold Dot in the nose.
BC isn't a real factor until significant range variations are part of the equation ... contact to 25Y really isn't significant as the velocity loss is within the extreme spread of most pistol loads.
Sectional density is a huge player in governing penetration.

I found three different formulas that I rendered in C++ software years ago that supposedly tried to determine the best load for a given application.
Taylor Knockout was one and two other systems ...
they may agree on things like mass, SD, velocity and bore being part of the equation, but none agree on how they are to be structured into the equation. As such, they give three different opinions.
in actual testing, one can see how they all do try to conjure up a straight answer but really end up forming an over intellectualized caliber war.
Its not unlike a Ford vs Chevy debate ...
best way to end one is to drive away in a Ferrari
While I favor 45, if the difference between them really becomes make or break ... you really need a rifle
__________________
it just needs more voltage

Last edited by venomballistics; 01-01-2017 at 09:50 PM.
Reply With Quote
The Following User Likes This Post:
  #56  
Old 01-01-2017, 09:55 PM
TAROMAN's Avatar
TAROMAN TAROMAN is offline
US Veteran
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 5,071
Likes: 4,809
Liked 4,506 Times in 1,564 Posts
Default

Shoot that 9mm 147 at 1200 FPS from your 357 Sig.
Expansion should not be an issue.
__________________
-jwk-
US Army '72-'95
Reply With Quote
  #57  
Old 01-01-2017, 10:25 PM
eahicks eahicks is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Oct 2016
Posts: 32
Likes: 7
Liked 29 Times in 12 Posts
Default How do you make a 9mm bullet act more like a .45

Do what I do... carry with Liberty Civil Defense rounds, 2000 fps, 450 ft lbs....blows a 3.5" hole and doesn't penetrate past 12". All with a 50 gr. Copper bullet.


Sent from my iPhone using Tapatalk

Last edited by eahicks; 01-01-2017 at 10:26 PM.
Reply With Quote
The Following User Likes This Post:
  #58  
Old 01-01-2017, 10:50 PM
BigBill's Avatar
BigBill BigBill is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Jan 2011
Location: north america
Posts: 9,201
Likes: 972
Liked 7,407 Times in 3,069 Posts
Default

The 9mm Luger round is questionable in stopping and killing power. But most of the negative stuff I read comes from the sandbox in close quarters when you want to dispatch the bad guy quickly. It takes multiple rounds.
The 9mm will never match the stopping power of the 45acp. I feel when in doubt if I second guess myself I ccw the 357,41,44 magnum. When your life depends on stopping power offer the bad guy the very best.

Don't underestimate the 1911/45acp loaded with those Speer 200gr jhp soup bowel hollow points. I did a lot of wet sand testing before I pick a round to carry.

Last edited by BigBill; 01-01-2017 at 10:52 PM.
Reply With Quote
The Following User Likes This Post:
  #59  
Old 01-01-2017, 11:02 PM
Skeet 028 Skeet 028 is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Feb 2010
Location: Wyoming
Posts: 1,652
Likes: 506
Liked 1,200 Times in 608 Posts
Default

What someone said about using the 357 Sig. You can get the velocity you need with heavier bullets. But with the original 9mm..agin the laws of physics kinda interfere. The case is so small it is hard to generate the velocities with a heavy bullet in the 9. If it was such a GREAT idea don't you think the ammo companies would have already done it. To get a good heavy bullet in the 9 to work the way you want it to..some things would have to be changed. I'm not saying it can't be done..I'm just saying it hasn't been done by the people who could make money out of the idea. And if the 45 is as bad as so many people want to think it is...why compare the 9 to it?? I have some +P rated 45 factory ammo that does what you all are trying to get the 9mm to do in spades. Physics still raises it's head again with the increase in recoil factor. If I have to shoot the 9 it is going to be with a factory 147 gr HP like the Federal or something with the Gold Dot(a very good bullet IMO). Seriously..if what we all might like to have with the 9mm was possible don't you think it would already have been done? Either it isn't safely possible or not economically feasible. The 10mm is a good round as is the 40 S&W...but they were developed for a perceived problem that was flawed from the beginning. So here we are today with two stepchildren. Gonna make another? Just trying to be the devil's advocate.
Reply With Quote
The Following User Likes This Post:
  #60  
Old 01-01-2017, 11:50 PM
Duckford Duckford is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Nov 2013
Posts: 263
Likes: 324
Liked 355 Times in 124 Posts
Default

If the FBI standardized BB pellet air guns tomorrow we would get a big promotional work about how the low recoil and large capacity would make it the theoretical best choice out there, and gets rid of all that risk of under penetration. If they switched to 500 S&W tomorrow, we'd get a big press statement about its superior killing power and ability to pierce the armor or terrorists and hard barriers. The FBI's real reasoning won't be released, you'll get a press release that satisfies people. The new round is going to be perfect, all others are poor choices. So those statements aren't worth as much as one would think.

Besides, the 9mm Luger fanbois, man on this forum, sat around and called the FBI terrible, terrible names for decades after replacing the 9mm Luger. 9mm bois hated the FBI, called them no nothings, desk jockeys, said the choice to go 40 was political, backwards, stupid. The MOMENT they went back to 9mm, suddenly the bois said "The FBI is the world's most prominent law enforcement agency,and their word is FACT", a turnover that took about all of 1/2 of a second. You can't have ti both ways.

When the 9mm was doing better in the junks science 20% gel tests of the 70's and early 80's, gel tests were irrefutable FACT. The second that they fixed the gel tests to 10% with better criteria and other calibers did better than 9mm, then suddenly "Those are just a bunch of idiots with jello blocks". You can't have it both ways.

When 9mm was touting superior expansion with high velocity early hollow points, its high expansion was a sign of its vast superiority. Now that 45 ACP hollow points in slow 230 grain offerings are offering superior damage in greater expansion and better, repeatable penetration, suddenly terminal ballistics doesn't matter and superior wound channels are worthless. Imagine that.

The 9mm is inferior terminal ballistics wise, that's fact. Optimized, the heavier bullet at same energy will end up pushing a wider faced expanded bullet deeper. Just like they've been doing since the big hit job to make 45 look bad to push a new caliber nobody wanted decades ago, 9mm doesn't actually stand on any one point to make a point, it just keeps changing goal posts, outright lying, junk science, and most tellingly, contradicting itself every 2 seconds when results change. Anyone who does that is not being objective and scientific, they are just trying to push a bias against all reason.

When the 5.7 was going to replace the 9mm, suddenly we got to see this whole thing play out again: the 5.7 was better than the 9mm because it had lower recoil, higher capacity, better hard barrier penetration, and of course, by the very logic of the 9mm crowd used to replace the 45 ACP. Suddenly instead of old GI's defending the 45 on the basis of heavier bigger caliber is better, the 9mm people, now the old guys in military and law enforcement, were the old fogies shaking their canes at the kids and using the same exact arguments the 45 people used against the 9mm. it was a repeat of the 70's all over again, and the same young bucks were now the old stalwarts. What irony. What a joke.

45 fan bois are pukish people. But no rabid fan base in this field is worse the 9mm bois. Little better than North Korea is best Korea nonsense; the 9mm has the BEST terminal performance, even as good or better than 357 magnum or 45 ACP, 9mm has BEST penetration, 9mm has BEST capacity, of course, when smaller calibers can do those better, sundenly a slower heavier 9mm is better. Why? Because of any real proof or reason? No. Because 9mm is best. BEST. No matter what. And we can rationalize it no matter what. Because 9mm is BEST. Repeat that. Again and again.

Kanew paddle wrote on here some time that 115 +p+ was just as good as 357 Magnum. That was when I realized that there is no objectivity or honesty in any of this. 9mm is BEST. You can't argue against that. its inferior ballistics are now superior. The 9mm magically hast he recoil of 9mm low target loads yet the power of a +P+ load. Absolute truth doesn't matter. We'll just take every other caliber and magically negate its actual ability while magically stretching the ability of the cartridge we like. We close the very real gaps. Magically. By just saying close enough, then implying the gaps don't matter, or say "even with the gaps its better anyways". Because 9mm is BEST. And no amount of anything can change our preconceived notion, because we only come to argue and win over people our preconceived notion.

I come to boards for a lot of good information, which there is a lot of. But there is a lot of this is a big farce, and you can only come here to chuckle. Indeed, these boards amuse me greatly.
Reply With Quote
  #61  
Old 01-02-2017, 12:43 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default That's what I decided.....

Quote:
Originally Posted by venomballistics View Post
Its not unlike a Ford vs Chevy debate ...
best way to end one is to drive away in a Ferrari
While I favor 45, if the difference between them really becomes make or break ... you really need a rifle
I came to the same conclusion about the Miami shoot out. It started tremendous caliber wars that ended up waffling between at least three cartridges when what the agents really needed was a rifle.
__________________
"He was kinda funny lookin'"
Reply With Quote
The Following 3 Users Like Post:
  #62  
Old 01-02-2017, 12:47 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default Interesting......

Quote:
Originally Posted by eahicks View Post
Do what I do... carry with Liberty Civil Defense rounds, 2000 fps, 450 ft lbs....blows a 3.5" hole and doesn't penetrate past 12". All with a 50 gr. Copper bullet.


Sent from my iPhone using Tapatalk
Well, there's something new for you. it must be a small rail gun.

One that really made even me look askance is the one with the bullet shaped like an impeller to increase hydrostatic pressure shock.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #63  
Old 01-02-2017, 01:30 AM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Nov 2012
Location: Reno Nv
Posts: 5,375
Likes: 138
Liked 2,573 Times in 1,389 Posts
Default

. I believe that a 165 gr. bullet or maybe slightly heavier would be able to do this. ( per #1 post )

Actually the 158gr plated RN is the largest bullet that fits in the 9mm case with a maximum seating of .300", if used.

Some 165gr bullets are .733" in length and need 1.185" OAL for safe case pressures.
Plus I don't see where the little 9mm case would gain that much with the added 10grs of weight.

Then there is getting the lead soft enough and the jacket thin enough to expand at 850fps out of a 4" barrel or less.

I am waiting to see how the 158gr Fiocchi does, if used enough or put to the gel test and posted on youtube.
Reply With Quote
The Following User Likes This Post:
  #64  
Old 01-02-2017, 11:56 AM
alwslate alwslate is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2009
Location: Indiana
Posts: 3,847
Likes: 1,021
Liked 2,451 Times in 1,306 Posts
Default

Quote:
Originally Posted by rwsmith View Post
'True Detective' is a main source of any ideas that I may have. It is highly criticizes the 9mm NATO round.
Sorry, but I like to think and experiment. I was a mechanical designer in a research laboratory. Curiosity, questioning and experimenting are part of my nature.
And yeah, NATO use a 9mm 124 gr. round all of my 9mm are loaded with it. I'm not arguing with its effectiveness, just wondering if it could be made even more effective, at least for close up work.
True detective? I'll give you the benefit of the doubt and
assume you're joking :-) If you want to use your design
experience to make 9mm ball more effective for close up
work then then learn from history and the Government military
ammo designers around the world. Create a 9mm 124 gr FMJ
design that tumbles in soft tissue quicker than the current
design. A 124 gr 9mm FMJ bullet is a good bit longer than
.45" I do believe.
Reply With Quote
The Following User Likes This Post:
  #65  
Old 01-02-2017, 03:16 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 3,947
Likes: 674
Liked 1,628 Times in 1,059 Posts
Default

Quote:
Originally Posted by BigBill View Post
The 9mm Luger round is questionable in stopping and killing power. But most of the negative stuff I read comes from the sandbox in close quarters when you want to dispatch the bad guy quickly. It takes multiple rounds.
The 9mm will never match the stopping power of the 45acp. I feel when in doubt if I second guess myself I ccw the 357,41,44 magnum. When your life depends on stopping power offer the bad guy the very best.

Don't underestimate the 1911/45acp loaded with those Speer 200gr jhp soup bowel hollow points. I did a lot of wet sand testing before I pick a round to carry.
Except you are talking ball ammo. A jhp hitting 60cal. Doesnt really matter where it started.
FWIW, wet sand testing tells you little about a bullets ability to expand in flesh. Wetpack or bal gel are really the only semi valid testing medium. Even water isnt correct.
__________________
NRA Cert. Inst. IDPA CSO

Last edited by fredj338; 01-02-2017 at 03:19 PM.
Reply With Quote
  #66  
Old 01-02-2017, 03:20 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 3,947
Likes: 674
Liked 1,628 Times in 1,059 Posts
Default

Quote:
Originally Posted by rwsmith View Post
I came to the same conclusion about the Miami shoot out. It started tremendous caliber wars that ended up waffling between at least three cartridges when what the agents really needed was a rifle.
Or just shoot better under stress. Itwas as much a training/skill failure as 9mm bullet failure.
__________________
NRA Cert. Inst. IDPA CSO
Reply With Quote
  #67  
Old 01-02-2017, 03:25 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 3,947
Likes: 674
Liked 1,628 Times in 1,059 Posts
Default

Quote:
Originally Posted by Nevada Ed View Post
. I believe that a 165 gr. bullet or maybe slightly heavier would be able to do this. ( per #1 post )

Actually the 158gr plated RN is the largest bullet that fits in the 9mm case with a maximum seating of .300", if used.

Some 165gr bullets are .733" in length and need 1.185" OAL for safe case pressures.
Plus I don't see where the little 9mm case would gain that much with the added 10grs of weight.

Then there is getting the lead soft enough and the jacket thin enough to expand at 850fps out of a 4" barrel or less.

I am waiting to see how the 158gr Fiocchi does, if used enough or put to the gel test and posted on youtube.
The 38sp+p with 158gr lswchp is an acceptably fighting round. Putting the same design into a 9mm would yield slightly less vel, so not seeing how it could improve on something like the 147gr hst +p currently made in 9mm. I'm still in favor of a good 124gr jhp at 1250fps. If the bullet is designed well. It will reach desired penetration with decent 50-60cal expansion.
__________________
NRA Cert. Inst. IDPA CSO
Reply With Quote
The Following User Likes This Post:
  #68  
Old 01-02-2017, 09:42 PM
S&W HE's Avatar
S&W HE S&W HE is offline
SWCA Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Mar 2011
Location: Nevada, USA section
Posts: 276
Likes: 263
Liked 76 Times in 42 Posts
Default

The little bullet going fast, big bullet going slow argument started in 1896 after the Army replaced the 1873 single action Peacemakers in 45 Colt with the new double action Model 1896 Colt 38. Due to failures to stop, the Army re-issued the 45 Col Peacemakers. The results from 1904 Thompson-LeGarde tests and the 1907 Pistol Trails reinforced the big bullet performance. (PM me with your email if you'd like copies of these historical documents. Warning: The Thompson-LeGarde Tests are gruesome.)

An interesting side note, the attached 1933 Bureau of Investigation letter supports the little bullet theory. Of course to write this letter Special Agent J.M. Keith had to ignore the results of the Thompson-LeGarde tests and the Pistol Trails as well as the 1911 45 ACP World War I track record. And he cites bullet weight in grams, not grains. Might want to convert 158 grams and 200 grams into pounds.

After 40 years the ammo manufacturers have developed 9mm cartridges that meet the 1975 (updated in 1985) National Institute of Justice's Relative Incapacitation Index findings. A study based on hypothetical assumptions and a computer-generated man and rated the 115-grain, 9 mm FMJ round twice as effective as a 230-grain .45 ACP FMJ.

So what's this all mean. You can find lots of information to support your side of the 121 year argument... and carry the round you trust and are most comfortable with.
Attached Thumbnails
How do you make a 9mm bullet act more like a .45-handgun-stopping-power-pdf   How do you make a 9mm bullet act more like a .45-1933-bureau-investigation-38-spl-letter-pdf  
__________________
Dave
SWCA #2465

Last edited by S&W HE; 01-04-2017 at 01:48 PM.
Reply With Quote
  #69  
Old 01-02-2017, 11:35 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 3,947
Likes: 674
Liked 1,628 Times in 1,059 Posts
Default

Quote:
Originally Posted by S&W HE View Post
The little bullet going fast, big bullet going slow argument started in 1896 after the Army replaced the 1873 single action Peacemakers in 45 Colt with the new double action Model 1896 Colt 38. Due to failures to stop, the Army re-issued the 45 Col Peacemakers. The results from 1904 Thompson-LeGarde tests and the 1907 Pistol Trails reinforced the big bullet performance. (PM me with your email if you'd like copies of these historical documents. Warning: The Thompson-LeGarde Tests are gruesome.)

And interesting side note, the attached 1933 Bureau of Investigation letter supports the little bullet theory. Of course to write this letter Special Agent J.M. Keith had to ignore the results of the Thompson-LeGarde tests and the Pistol Trails as well as the 1911 45 ACP World War I track record. And he cites bullet weight in grams, not grains. Might want to convert 158 grams and 200 grams into pounds.

After 40 years the ammo manufacturers have developed 9mm cartridges that meet the 1975 (updated in 1985) National Institute of Justice's Relative Incapacitation Index findings. A study based on hypothetical assumptions and a computer-generated man and rated the 115-grain, 9 mm FMJ round twice as effective as a 230-grain .45 ACP FMJ.

So what's this all meammn. You can find lots of information to support your side of the 121 year argument... and carry the round you trust and are most comfortable with.
Well not unlike global warming computer models, you can configure the model to achieve a desired result. Years of military conflict i believe shows 9mm ball to be slightly inferior to 45, not twice as effective. Computer models alWays seem to ignore history. Totally agree with your final statement.
__________________
NRA Cert. Inst. IDPA CSO

Last edited by fredj338; 01-02-2017 at 11:36 PM.
Reply With Quote
  #70  
Old 01-02-2017, 11:35 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default I MAY....

Quote:
Originally Posted by Nevada Ed View Post
. I believe that a 165 gr. bullet or maybe slightly heavier would be able to do this. ( per #1 post )

Actually the 158gr plated RN is the largest bullet that fits in the 9mm case with a maximum seating of .300", if used.

Some 165gr bullets are .733" in length and need 1.185" OAL for safe case pressures.
Plus I don't see where the little 9mm case would gain that much with the added 10grs of weight.

Then there is getting the lead soft enough and the jacket thin enough to expand at 850fps out of a 4" barrel or less.

I am waiting to see how the 158gr Fiocchi does, if used enough or put to the gel test and posted on youtube.
I'll be looking forward to that. I MAY stop short of 165, I mainly want a heavier bullet than is out there. I just figure that it needs to do 830 or better. And yeah, COAL and bullet depth are big consideration. I'll probably seat them out as much as possible until I get a handle on what's going on. And if Fiochi has a 158 I'd like to look at it myself, because it may save some incremental steps before I get to the UNKNOWN.

I worked 14 hours today trying to replace front doors to the point where I could secure them. Not much time for dreaming and testing today.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #71  
Old 01-02-2017, 11:53 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default Whether it' aided by a computer or not....

Quote:
Originally Posted by fredj338 View Post
Well not unlike global warming computer models, you can configure the model to achieve a desired result. Years of military conflict i believe shows 9mm ball to be slightly inferior to 45, not twice as effective. Computer models alWays seem to ignore history. Totally agree with your final statement.
... The proof is only in the pudding. If it works, great. If not back to the old drawing screen.

PS: I haven't use drawing board in 30 years. You couldn't drag me back to one.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #72  
Old 01-03-2017, 12:03 AM
armorer951's Avatar
armorer951 armorer951 is online now
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 2,520
Likes: 99
Liked 2,112 Times in 953 Posts
Default

All the debate and dispute over caliber, bullet weight and such reminds me of a quote by Allen Iverson........

"When you are not practicing, someone else is getting better."
__________________
Ret LE, FA Instr, S&W Armorer
Reply With Quote
The Following User Likes This Post:
  #73  
Old 01-03-2017, 12:24 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default

Quote:
Originally Posted by Skeet 028 View Post
What someone said about using the 357 Sig. You can get the velocity you need with heavier bullets. But with the original 9mm..agin the laws of physics kinda interfere. The case is so small it is hard to generate the velocities with a heavy bullet in the 9. If it was such a GREAT idea don't you think the ammo companies would have already done it. To get a good heavy bullet in the 9 to work the way you want it to..some things would have to be changed. I'm not saying it can't be done..I'm just saying it hasn't been done by the people who could make money out of the idea. And if the 45 is as bad as so many people want to think it is...why compare the 9 to it?? I have some +P rated 45 factory ammo that does what you all are trying to get the 9mm to do in spades. Physics still raises it's head again with the increase in recoil factor. If I have to shoot the 9 it is going to be with a factory 147 gr HP like the Federal or something with the Gold Dot(a very good bullet IMO). Seriously..if what we all might like to have with the 9mm was possible don't you think it would already have been done? Either it isn't safely possible or not economically feasible. The 10mm is a good round as is the 40 S&W...but they were developed for a perceived problem that was flawed from the beginning. So here we are today with two stepchildren. Gonna make another? Just trying to be the devil's advocate.
I didn't say it was a GREAT idea, but it is an interesting idea. And yeah, I wonder the same things. Has anybody not gone that way because they've tried it and it doesn't work, or just figured it was a stupid idea, or that it just wouldn't sell. The things is that I 'think' it would work, but I don't really know. This wouldn't be a stepchild caliber, it's a plain, common, cheap 9mm. And the Sig has been out there but it's not in common use. I wonder what it is about it? Too expensive? People don't want a bottleneck pistol cartridge? The round is as big as a .40? Maybe that has something to do with it. it may be a compressed load. But yeah, that little 9mm case fills up a LOT faster than a .38. I One thing I have in my favor is that bigger bullets take less powder than their smaller, faster velocity counterparts.

What's not in my favor is that in the small case, the pressure may build exponentially and really draw the line. The 158 grain that is already manufactured, isn't a common or popular round, so that indicates that this wouldn't be all that popular, which is probably why companies don't produce this round.

Anyway, if it proves to be useless, impractical or impossible at least we'll know.
__________________
"He was kinda funny lookin'"

Last edited by rwsmith; 01-03-2017 at 12:38 PM.
Reply With Quote
  #74  
Old 01-03-2017, 12:54 PM
sodacan sodacan is online now
Member
 
Join Date: Feb 2006
Posts: 1,751
Likes: 63
Liked 1,066 Times in 523 Posts
Default

The simple answer to the OP's question is, you can't.

Last edited by sodacan; 01-03-2017 at 01:43 PM.
Reply With Quote
The Following 2 Users Like Post:
  #75  
Old 01-03-2017, 02:08 PM
Skeet 028 Skeet 028 is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Feb 2010
Location: Wyoming
Posts: 1,652
Likes: 506
Liked 1,200 Times in 608 Posts
Default

Quote:
Originally Posted by rwsmith View Post
But yeah, that little 9mm case fills up a LOT faster than a .38. I One thing I have in my favor is that bigger bullets take less powder than their smaller, faster velocity counterparts.

What's not in my favor is that in the small case, the pressure may build exponentially and really draw the line. The 158 grain that is already manufactured, isn't a common or popular round, so that indicates that this wouldn't be all that popular, which is probably why companies don't produce this round.

Anyway, if it proves to be useless, impractical or impossible at least we'll know.
This part of the post is the most relevant. I think what was proposed is possible. Is it a worthwhile idea. Maybe not. With all the niche companies and the big ones too there would be loads commercially available. The small 9mm case and the length of the magazines conspire against heavy long bullets in the caliber. The debate on the 9mm and 45 has been raging for decades(well maybe not raging). If it were economically and physically possible it would already be done. Develop a new case and a new gun or two do some realistic work and you could get the 9mm to almost equal the 45 loaded with the same style bullets at about the same velocity. Again physics raises it's ugly head. Remember the Winchester 9mm mag?? it could maybe be used as a basis for this. But then again..they made the 45 Win Mag at the same time. I'm not saying the 9mm is useless. I'm just saying anything you do to the 9mm to make it more effective and "equal" the 45 can also be done to the 45 to make it a "better" round. The debate will still continue. Part of the biggest problems facing both is the fact that because of the Geneva Convention militaries have to use FMJs. The 9 will never be able to equal anything larger with those restrictions. But then again..the 45 is hampered by the same rules. Which raises some questions about modern warfare I think I want to address in a different post
Reply With Quote
The Following User Likes This Post:
  #76  
Old 01-04-2017, 12:39 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default I'm not really indulging in caliber wars......

I didn't say it would be as good or better than a .45, but the philosophy behind the idea of the .45 obviously works and works well and maybe that same philosophy would make a 9mm CLOSER to what a .45 does that would make it a more effective round than it already is.

I guess I'm a little different from most reloaders. I do have pet rounds that I've loaded repeatedly, but a lot of my time is testing new rounds just to see how they shoot. It is also economical, and I use .30 110 gr carbine bullets in my rifle because they are cheap as dirt. I'm on a tight budget and can't buy a gun for every kind of shooting I want to do.

Believe me, I'm not planning on giving up my 124 XTPs any time soon unless something is proven all the way to doing a great job in the field. Even that is a choice, as would probably be any new combo that came in the picture, many people wouldn't buy it, as the 158 gr. 9mm isn't a hot seller. Like many other people, I compromise and try to stay away from 115 and 147 grain jhps unless for a special purpose. Though I'm a middle of the road guy, my alter ego wants to explore the edges.

I've made extremely reduced 30-06 because they are fun as the dickens to shoot, and an extremely soft 9mm to introduce my wife to the 9mm. In that case was a heavy (147 grain) bullet for various reasons, including operating the action. I was suggested to me to try reduced (well under the book) loads of Acc #7. Besides working like a champ in producing a soft and reliable round, it was an amazingly accurate combination. People might say, well go get a 6mm rifle but that isn't getting the full range of potential out of any gun. It doesn't cost me anything to make the kinds of rounds I want to shoot out of any gun.

As has been said, yeah, the 9mm may well be self limiting. But I want find out where that limit is in getting a heavy projectile to go at least 830 fps out of a typical 9 mm gun without overloading it beyond the range that it was designed for. It may not even be a '+P' type round.

I'd like to thank everybody again who participated, lent ideas and gove thoughts on possible limitations, even acceptance by the industrly. I think we've beat it as far as we can until we get some data. If you have a brainstorm, though, don't hesitate to bring it up. =8^ )
__________________
"He was kinda funny lookin'"

Last edited by rwsmith; 01-04-2017 at 01:00 AM.
Reply With Quote
The Following User Likes This Post:
  #77  
Old 01-04-2017, 01:16 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default Well somebody has been here...

I found reloading data for 165 grain X-treme bullets:

Power pistol - 4.2 grain at 34,686 psi (estimated) for 851 fps

Accurate #7 - 5.3 grains at 32,683 psi (estimated) for 894 fps

This suggests that a slightly heavier bullet with Acc #7 powder could get the 830 fps velocity that I'm looking for.

The doesn't address the TYPE of bullet that would easily expand at that velocity.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #78  
Old 01-04-2017, 02:55 AM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Nov 2012
Location: Reno Nv
Posts: 5,375
Likes: 138
Liked 2,573 Times in 1,389 Posts
Default

Right now I can only find three 165gr factory loadings.

Double Tap: 165gr JHP at +/- 900fps depending on...... (Midway)

Freedom Munitions: 165gr RN at a published 800fps.

United Nations ammo: 165gr ball, 850fps c/o a 5" barrel, but.....
ammo comes in a GI can of 1,000.

For a quick test, the Freedom RN might be the way to go, for
your pistol.

The main thing with the 165gr bullet is its ogive and over all length,
which has a lot of bearing on what the OAL can be and if it will work in your pistol and magazine.
Reply With Quote
The Following User Likes This Post:
  #79  
Old 01-04-2017, 01:47 PM
S&W HE's Avatar
S&W HE S&W HE is offline
SWCA Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Mar 2011
Location: Nevada, USA section
Posts: 276
Likes: 263
Liked 76 Times in 42 Posts
Default

Special Agent J.M. Keith's 1933 Bureau of Investigation letter cites bullet weight in grams, not grains. This means his 158 gram 38 Special round would weigh in at just over one third of a pound (0.3483268 lbs.) and his 200 gram 45 APC bullet will weigh almost half a pound (0.44 lbs.).

Based upon the FBI's firearms/ammo selection track record, many people, myself included, don't have much faith in their decisions.

And what's sad is, what the FBI does is copied by hundreds, if not thousands, of local law enforcement agencies.
__________________
Dave
SWCA #2465

Last edited by S&W HE; 01-04-2017 at 03:09 PM.
Reply With Quote
  #80  
Old 01-04-2017, 06:27 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default You think that report is faulty?

Quote:
Originally Posted by S&W HE View Post
Special Agent J.M. Keith's 1933 Bureau of Investigation letter cites bullet weight in grams, not grains. This means his 158 gram 38 Special round would weigh in at just over one third of a pound (0.3483268 lbs.) and his 200 gram 45 APC bullet will weigh almost half a pound (0.44 lbs.).

Based upon the FBI's firearms/ammo selection track record, many people, myself included, don't have much faith in their decisions.

And what's sad is, what the FBI does is copied by hundreds, if not thousands, of local law enforcement agencies.
I'd say a 1/2 lb. bullet at 850 fps would knock the stuffings out of somebody and would knock the stuffings out of the shooter too.

You really caught me off guard. I was casually reading through your post and WHAAAAAA????

One thing the FBI considers that doesn't much apply to us is car door penetration. Even with good data you have to take it with a grain of rock salt.
__________________
"He was kinda funny lookin'"

Last edited by rwsmith; 01-04-2017 at 06:28 PM.
Reply With Quote
  #81  
Old 01-04-2017, 06:47 PM
Amp's Avatar
Amp Amp is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Aug 2012
Location: Southwestern Pennsylvania
Posts: 329
Likes: 31
Liked 246 Times in 114 Posts
Default

I have always liked my 9mm's better than my 45's.
The 9 is lighter so I can carry more of them and hide them better. And the gun the shoots them is smaller.
Oh, and they cost less.
__________________
Plastic... On a gun??
Reply With Quote
The Following User Likes This Post:
  #82  
Old 01-04-2017, 08:04 PM
old tanker old tanker is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Feb 2007
Location: Fort Knox, Kentucky
Posts: 322
Likes: 943
Liked 368 Times in 159 Posts
Default

Quote:
Originally Posted by Rule3 View Post
...Somewhere there is something that will work if you actually hit the target!
Still tough to miss fast enough to win, regardless of caliber.
Reply With Quote
  #83  
Old 01-05-2017, 03:52 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default Well, with this info.....

With this info I can go right into terminal testing. I've seen a recipe for cheap ballistic gelatin somewhere. And if I get the xtreme plated 165 grain jobs, I'll have to modify the noses to approximate an expanding round. Oh boy, have we got fun?
__________________
"He was kinda funny lookin'"
Reply With Quote
  #84  
Old 01-05-2017, 04:45 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default I read that....

Quote:
Originally Posted by BigBill View Post
T

Don't underestimate the 1911/45acp loaded with those Speer 200gr jhp soup bowel hollow points. I did a lot of wet sand testing before I pick a round to carry.
I read that the idea behind the Gold Dots was a semi wadcutter with a huge hole they referred to as the 'flying ashtray'.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #85  
Old 01-05-2017, 11:18 AM
S&W HE's Avatar
S&W HE S&W HE is offline
SWCA Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Mar 2011
Location: Nevada, USA section
Posts: 276
Likes: 263
Liked 76 Times in 42 Posts
Default

Quote:
Originally Posted by rwsmith View Post
With this info I can go right into terminal testing. I've seen a recipe for cheap ballistic gelatin somewhere. And if I get the xtreme plated 165 grain jobs, I'll have to modify the noses to approximate an expanding round. Oh boy, have we got fun?
X-Treme offers a double plated 165 grain hollow point that I use in my 10mm loads. I don't use the HP bullet in the 40 because my "hot" loads are under 1200 fps and a HP bullet is not needed to shot cardboard or steel.

Assuming your discussing the 10mm short (40 S&W) loadings, here's one of my favorites:

Pistol: Para Ltd 40/6 / 5.0" Barrel
Caliber: 40 S&W
Bullet: X-Treme 165 gr. P-RNFP / 1.125" OAL
Powder / Charge: Accurate #7 / 9.2 grains (9.3 Max)
Primer: Federal 200
Brass:: A-USA
Chrono: Ave: 1160 fps ES: 33 SD: 12
Comment: Very little 40 S&W "Snap"

Suggestion: Spend some time here. Check out their methods and results. My 45 ACP carry load for the 3.0" 25 ounce 1911 is included and this data reinforced my tests as well as other available info.

http://www.luckygunner.com/labs/self...llistic-tests/
__________________
Dave
SWCA #2465

Last edited by S&W HE; 01-05-2017 at 11:20 AM.
Reply With Quote
The Following User Likes This Post:
  #86  
Old 01-06-2017, 11:29 PM
Qc Pistolero Qc Pistolero is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: May 2016
Posts: 459
Likes: 120
Liked 216 Times in 146 Posts
Default

Quote:
Originally Posted by rwsmith View Post
A few good worms don't make the whole can bad. In the video the 147 grain Gold Dot did expand about that big, so I'd expect that a 165 grain 'Gold Dot' could do the same thing if constructed for the job like the 'short barrel 135 gr. Gold Dots do. I see that they make and have data for a 180 gr. .38 bullet. And if what you say about heavier bullets approaching 9mm effectiveness MAY hold true for 9mm approaching the .45. So that is encouraging enough to work on this for a while.
Well,considering jacketted bullets,I must admit that I don't have experience enough to discuss the matter.I guess on that one I must concede.
Cast bullets,which are the only projectiles I use(and never happened to use them in sd I must add)have more penetration.I will not indulge with expansion experience about cast vs jacket bullets since I do not have any scientific or ''from the bottom of my pants''experience with jacketed bullets.I'm a firm believer of
A)penetration
B)by a large bullet
C)that will exit so as to dump as much blood from both ends of the wound.
The 9 is a good penetrator,being smaller than the .45(all else being equal)But it is the nose shape that counts;a large nose SWC in .38(like the Keith,Thompson or better,hard cast WC bullet) will do more damage.
Please read me right;the 9 is good but still only a 9mm or only as good as a .38 Spl +p or +p+ depending on the weight of the bullet.
But you could blame me of being a large caliber lover and to this,I could only bow down and thank you for.
Qc
Reply With Quote
The Following User Likes This Post:
  #87  
Old 01-07-2017, 12:38 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45 How do you make a 9mm bullet act more like a .45  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 19,209
Likes: 22,397
Liked 14,475 Times in 7,453 Posts
Default Usually over penetration is undesireable....

If you shoot through a perp in a defensive situation you may hit somebody behind the perp that you don't want to.

This to me is kind of a 'best of both worlds' approach. While having enough weight for good penetration and the ballooning design increases the diameter of the wound channel. 135 gr. Gold Dots are designed to expand at the 830 fps I'm looking for in 'my' bullet/cartridge combination. A heavy bullet designed to do the same i believe would be devastating. Kind of a 'best of both worlds' approach, or maybe a 'not as good as either cartridge' approach.
__________________
"He was kinda funny lookin'"

Last edited by rwsmith; 01-07-2017 at 12:42 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bad shape don't make it old, old don't make it valuable cussedemgun The Lounge 12 02-05-2015 07:02 PM
Does modifying a RNL bullet potentially make it a better stopper? GatorFarmer Ammo 9 06-13-2012 12:16 AM
Does a bullet button make the M&P 15 California compliant? Sierra Steve 2nd Amendment Forum 4 12-01-2011 11:21 AM
Bullet strikes that make sparks in movies/TV P&R Fan The Lounge 30 05-23-2011 08:48 PM
Clothes make the man, but stocks make the revolver! PALADIN85020 The Lounge 3 12-12-2009 11:33 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:53 AM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)