Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >

Notices


Reply
 
Thread Tools Display Modes
  #1  
Old 01-05-2017, 11:09 AM
smokindog's Avatar
smokindog smokindog is online now
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Mar 2013
Location: The Great State of Texas
Posts: 1,813
Likes: 2,029
Liked 1,322 Times in 689 Posts
Default Crushed Glass Blast Media for tumbling

Anyone ever try Crushed Glass Blast Media for tumbling? Saw this at Northern Tool and was curious!


http://www.northerntool.com/shop/too...BYblFmB9WytUL0
__________________
Really? U saw it in Wikipedia?
Reply With Quote
  #2  
Old 01-05-2017, 11:16 AM
Alk8944's Avatar
Alk8944 Alk8944 is online now
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Jan 2007
Location: Sandy Utah
Posts: 5,743
Likes: 491
Liked 3,119 Times in 1,503 Posts
Default

Only if you want your brass to have a bead-blasted look instead of being bright. You could use sand and get the same effect. Don't know why anyone would want to do this.

It would also eat up the inside of the tumbler drum much faster than the conventional corn cob or groung walnut shell media.
__________________
Gunsmithing S&W since 1961

Last edited by Alk8944; 01-05-2017 at 11:17 AM.
Reply With Quote
The Following 3 Users Like Post:
  #3  
Old 01-05-2017, 11:17 AM
smokindog's Avatar
smokindog smokindog is online now
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Mar 2013
Location: The Great State of Texas
Posts: 1,813
Likes: 2,029
Liked 1,322 Times in 689 Posts
Default

Like I said, just curious and thought I'd ask the experts! Ya just never know.....
Quote:
Originally Posted by Alk8944 View Post
Only if you want your brass to have a bead-blasted look instead of being bright. You could use sand and get the same effect. Don't know why anyone would want to do this.
__________________
Really? U saw it in Wikipedia?
Reply With Quote
The Following User Likes This Post:
  #4  
Old 01-05-2017, 01:46 PM
Big Cholla Big Cholla is offline
SWCA Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 2,961
Likes: 4,404
Liked 3,798 Times in 1,348 Posts
Default

IMHO, DON'T use the glass. There WILL be glass dust created. Unless you know 'clean shop' procedures and are set up to handle your cleaned brass that way and only that way, you are handling very harmful to your health items.

It is possible with good vibratory tumblers and media from walnut shells, corn cobs or stainless steel to get as good of a cleaning job as is necessary without risking your health. ....
Reply With Quote
The Following 4 Users Like Post:
  #5  
Old 01-05-2017, 02:00 PM
quinn's Avatar
quinn quinn is offline
SWCA Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Sep 2009
Location: San Antonio, TX
Posts: 1,910
Likes: 4,230
Liked 4,063 Times in 764 Posts
Default

BTW: Glass is harder than brass and would thin your cases over time as the glass beads removed brass. JMHO, that's why I'm not fond of steel media, too.
__________________
Randy
Lost in the N zone

Last edited by quinn; 01-05-2017 at 02:02 PM.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 01-05-2017, 02:24 PM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 2,639
Likes: 1,037
Liked 1,812 Times in 1,009 Posts
Default

I haven't heard of this being used ....yet.
It's an abrasive and I don't know how abrasive it would be.
Rock tumbling begins with a course abrasive and ends with a fine polishing abrasive...but rocks are a lot harder than brass.

Try it with a fine grit and check often , stainless steel pins are all the rage now. Be sure to use it in a rubber lined unit like the Thumbler Tumbler , water may be needed like the stainless steel pins .

I still use polishing treated walnut shell media in a vibrating unit for mine , the water and drying makes a mess .

Gary

Last edited by gwpercle; 01-05-2017 at 02:29 PM.
Reply With Quote
The Following User Likes This Post:
  #7  
Old 01-05-2017, 02:30 PM
smokindog's Avatar
smokindog smokindog is online now
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Mar 2013
Location: The Great State of Texas
Posts: 1,813
Likes: 2,029
Liked 1,322 Times in 689 Posts
Default

For the record, I use walnut or corn cob now. I was just curious about this product. THANKS for the info, interesting responses. I've had similar reservations with the pins but am always open to new ideas. I've often thought of trying play sand as mentioned earlier.

Again, just one of those "what if" discussions!
__________________
Really? U saw it in Wikipedia?
Reply With Quote
  #8  
Old 01-05-2017, 02:36 PM
rck281 rck281 is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Feb 2010
Location: Kansas City area
Posts: 988
Likes: 140
Liked 384 Times in 126 Posts
Default

I use stainless pins in the Franklin Arsenal equipment. Works very well ad the brass is CLEAN, including primer pockets. Does it shoot better? No. Just looks better for whatever that's worth.
__________________
Dick
Reply With Quote
  #9  
Old 01-05-2017, 02:46 PM
mikld's Avatar
mikld mikld is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: May 2012
Location: S. Orygun
Posts: 1,109
Likes: 653
Liked 504 Times in 327 Posts
Default

BTDT I tried everything I could think of to tumble brass. Glass beads (from my bead blaster, medium fine) are very aggressive when used in a rotary, but in my wobbler it did nuttin'. In my rotary glass beads produced a matt finish, not shiny like seems to be the fad today, but very clean and even finish...
Reply With Quote
  #10  
Old 01-05-2017, 03:08 PM
Big Cholla Big Cholla is offline
SWCA Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 2,961
Likes: 4,404
Liked 3,798 Times in 1,348 Posts
Default

A BTW: You people getting into needing to clean large quantities of brass might consider going to Lowes or Home Depot and purchasing one of their smallest polyurathane drum concrete mixers. Every once in a while my local Lowes puts the demo unit on sale for a little under $150. Back in my competition days I would have bought one then. Today, I really don't need it. Fill one with walnut shells and an ounce or two of any of the common 'cleaners'. Run it with up to 2000 brass and then dump the load out into a wheelbarrow with a wire mesh over it. A friend is a commercial re-loader and this is the method he uses. Slick, effortless and low maintenance. .....
Reply With Quote
The Following 3 Users Like Post:
  #11  
Old 01-05-2017, 04:37 PM
smokindog's Avatar
smokindog smokindog is online now
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Mar 2013
Location: The Great State of Texas
Posts: 1,813
Likes: 2,029
Liked 1,322 Times in 689 Posts
Default

Same with Harbor Fright and Northern Tool!

Great minds! This thread is the result of such a search. I actually need to fix a portion of a walk. I COULD mix what I need by hand in my large tub (multiple) OR I could buy a small mixer and then have it for cleaning "things". I was looking for options on bulk media!!!! I also remember either a thread or a video where someone fitted a 5 gallon bucket into one of these mixers to give a small batch/large batch option!
Quote:
Originally Posted by Big Cholla View Post
A BTW: You people getting into needing to clean large quantities of brass might consider going to Lowes or Home Depot and purchasing one of their smallest polyurathane drum concrete mixers. Every once in a while my local Lowes puts the demo unit on sale for a little under $150. Back in my competition days I would have bought one then. Today, I really don't need it. Fill one with walnut shells and an ounce or two of any of the common 'cleaners'. Run it with up to 2000 brass and then dump the load out into a wheelbarrow with a wire mesh over it. A friend is a commercial re-loader and this is the method he uses. Slick, effortless and low maintenance. .....
__________________
Really? U saw it in Wikipedia?

Last edited by smokindog; 01-05-2017 at 04:38 PM.
Reply With Quote
  #12  
Old 01-06-2017, 03:38 AM
Frank46 Frank46 is offline
US Veteran
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Sep 2010
Location: New Iberia, Louisiana
Posts: 3,056
Likes: 15,626
Liked 1,432 Times in 860 Posts
Default

Avoid the glass media and it could lead to silicosis which is a bad lung disease mostly caused when using crushed glass,sand and and other types of blasting media. Stick to corn cobs media, crushed walnut media and the new stainless steel pins with lemishine. Frank
Reply With Quote
The Following User Likes This Post:
  #13  
Old 01-06-2017, 11:22 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 2,639
Likes: 1,037
Liked 1,812 Times in 1,009 Posts
Default

Quote:
Originally Posted by smokindog View Post
For the record, I use walnut or corn cob now. I was just curious about this product. THANKS for the info, interesting responses. I've had similar reservations with the pins but am always open to new ideas. I've often thought of trying play sand as mentioned earlier.

Again, just one of those "what if" discussions!
One thing I know will NOT work is dry clay kitty litter , it is just a bad idea. Dusty and doesn't polish worth a hoot.
Rice works at first but breaks down fast and doesn't put on a high polish.
Play sand would be similar to the glass media. I haven't tried sand.
For myself , who likes bright and shiney brass , the nut shell treated with polishing rouge works best. Flitz now makes a media additive that will rejuvenate old media or can be used to treat plain media, I'm trying some in walnut shells now and seems to be working .
Gary
Reply With Quote
  #14  
Old 01-06-2017, 12:20 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Sep 2003
Location: Indiana
Posts: 1,606
Likes: 343
Liked 759 Times in 378 Posts
Default

Ground walnut shells with a little liquid Flitz or other polish are hard to beat. Often the flash holes have a piece of media that needs to be poked out. That is the only drawback I find.
Reply With Quote
  #15  
Old 01-06-2017, 12:32 PM
Mikeinkaty Mikeinkaty is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Sep 2016
Posts: 282
Likes: 6
Liked 112 Times in 52 Posts
Default

You want a cheap way to clean your brass? Get a wide mouth plastic jug and use zip ties to strap it inside your clothes dryer using a no heat setting. I can do about 150 rounds per jug. Takes about 2 hours. Use limi shine and liquid soap. I generally deprime first. Takes about 2 hours. I can do 3 jugs at one time. I don't use steel pins. Don't need to.
Reply With Quote
  #16  
Old 01-06-2017, 01:47 PM
lebomm lebomm is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Dec 2008
Location: Seattle
Posts: 1,629
Likes: 27
Liked 545 Times in 326 Posts
Default

smokindog,
+1 stay away from the glass !

Larry
Reply With Quote
The Following User Likes This Post:
  #17  
Old 01-06-2017, 03:08 PM
fredj338's Avatar
fredj338 fredj338 is offline
Member
 
Join Date: Feb 2006
Location: Kalif. usa
Posts: 4,170
Likes: 784
Liked 1,772 Times in 1,153 Posts
Default

Quote:
Originally Posted by Big Cholla View Post
A BTW: You people getting into needing to clean large quantities of brass might consider going to Lowes or Home Depot and purchasing one of their smallest polyurathane drum concrete mixers. Every once in a while my local Lowes puts the demo unit on sale for a little under $150. Back in my competition days I would have bought one then. Today, I really don't need it. Fill one with walnut shells and an ounce or two of any of the common 'cleaners'. Run it with up to 2000 brass and then dump the load out into a wheelbarrow with a wire mesh over it. A friend is a commercial re-loader and this is the method he uses. Slick, effortless and low maintenance. .....
My buddy did just that but built a drum from a 5gal bucket to fit inside. I think he can do something like 10k at a pop with ss pins.
__________________
NRA Cert. Inst. IDPA CSO
Reply With Quote
  #18  
Old 01-06-2017, 08:41 PM
Houlton Houlton is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Aug 2015
Posts: 324
Likes: 1
Liked 438 Times in 143 Posts
Default

The best thing I have come across for straight wall cases in my Lyman tumbler is Lizard Litter. Big bag at the pet shop $3. Cleans very well but is a B---h to get out of bottle neck cases.
Reply With Quote
  #19  
Old 01-06-2017, 11:01 PM
bluetopper's Avatar
bluetopper bluetopper is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Feb 2008
Location: Northeast TX
Posts: 687
Likes: 210
Liked 170 Times in 97 Posts
Default

I tried glass beads that they mix in highway striping paint for reflectivity.
It didn't do worth a durn, just gave a dull sheen. Never again.
Reply With Quote
  #20  
Old 01-09-2017, 09:08 PM
Maximumbob54's Avatar
Maximumbob54 Maximumbob54 is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Oct 2010
Posts: 7,208
Likes: 8,759
Liked 1,874 Times in 1,022 Posts
Default

Whatever you use, buy a Dillon media separator and you won't regret it. I tried three different models and once I bought the Dillon I threw the rest away. And I am NOT on the blue kool aid band wagon. This is just a product that Dillon makes hands down the best. If anyone wants to beat them then make the same thing with a lid so dust stops flying everywhere. I've tried several tote bins with slots cut for the handle but something made for a perfect fit sure would be nice.
Reply With Quote
  #21  
Old 01-09-2017, 09:30 PM
patrickd patrickd is offline
Member
Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling Crushed Glass Blast Media for tumbling  
Join Date: Aug 2014
Posts: 333
Likes: 248
Liked 388 Times in 169 Posts
Default

Quote:
Originally Posted by Maximumbob54 View Post
Whatever you use, buy a Dillon media separator and you won't regret it. I tried three different models and once I bought the Dillon I threw the rest away. And I am NOT on the blue kool aid band wagon. This is just a product that Dillon makes hands down the best. If anyone wants to beat them then make the same thing with a lid so dust stops flying everywhere. I've tried several tote bins with slots cut for the handle but something made for a perfect fit sure would be nice.
I use my Hornady vibratory case cleaner. It came with two lids. One is slotted. I just put the slotted lid on, turn it upside down over a bucket and turn it on. 30 seconds later it has shaken out all the media from the brass. Then dump the clean brass in a separate container. No need for a separator. I let the machine do it all for me.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
tumbling media hotrod150 Reloading 26 09-04-2013 08:53 AM
Tumbling media jkmo Reloading 10 11-25-2012 09:17 PM
What tumbling media can be used? Practical Reloading 7 07-20-2011 08:13 AM
Tumbling Media Charliee Reloading 17 07-27-2010 05:04 PM
tumbling media 6shot Reloading 12 12-20-2009 01:00 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:33 AM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)