Will this setup work? From the research I've done, it appears it will. I am considering the Uniflow Powder Measure with a Case Activated Linkage Kit. Any other parts needed to make this work?

Will I use my existing powder thru expanding dies, or does the Uniflow screw directly into the press?

What about the Hornady Lock-n-Load with a Case Activated Powder Drop? Is anyone using this setup? Would I need any other parts?

What type press


Sent from my iPhone using Tapatalk

There's an adapter needed to use it with a powder thru expander die.I think I've seen them on eBay.

Just me but if a company sells an object and it is not ready to use out of the box.......................

before you have to buy another part or stand......
I pass.

One reason my set ups are "Green".

I use the Lee 4 die sets in the Lee Classic Turret Press.

I use the Lee Auto Drum and the Lee Pro Auto Disk powder measures attached to the expander die.The both work well but when I use Titegoup powder the least amount I can throw is 3.3gr without altering the smallest disk hole for the Pro Auto disk.

I can get everything working well without the use of the Lee auto disk riser added to the expander using the Pro Auto Disk Measure if I don't attach the Lee Safety Prime to the Classic Turret Press.

I usually decap with the Lee Universal Decapper and prime the cases with a Lee Hand Primer or RCBS Bench Primer.The sizing die in the turret has the decapping pin removed.

EDIT:there's a couple of Lee products I don't like.
#1 Lee Safety Prime
#2 Lee Adjustable Powder Disk

Attached Images

	IMG_20170207_134813.jpg (145.2 KB, 27 views)
	IMG_20170207_134829.jpg (77.3 KB, 24 views)
	IMG_20170207_134846.jpg (66.4 KB, 26 views)

__________________
NEVER GIVE UP YOUR GUN