Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 07-04-2017, 06:16 PM
Drill Sergeant Drill Sergeant is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Jun 2014
Posts: 27
Likes: 1
Liked 12 Times in 8 Posts
Default Favorite .38 SPL Snubbie loads?

How about it. What are your favorite loads for all steel, S&W snubbies?

Thanks!
Reply With Quote
  #2  
Old 07-04-2017, 07:48 PM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 3,296
Likes: 1,677
Liked 2,512 Times in 1,352 Posts
Default

A 160 grain cast lead wadcutter, Lyman #358432 or the NOE version 360-160-WC-PB(360432), sized .358.
Target load : 2.8 grains of bullseye...it's a tack driver, 700 fps. 15 shots grouped into 1 1/2 inch one ragged hole with I flyer...my fault.

General purpose: 5.7 grains AA #5...warmer, close to 900 fps and accurate. 10 shots grouped into 1 3/8 inches....one ragged hole !

Gary
Reply With Quote
The Following User Likes This Post:
  #3  
Old 07-04-2017, 08:24 PM
rg1 rg1 is offline
Member
 
Join Date: Oct 2008
Posts: 105
Likes: 1
Liked 43 Times in 29 Posts
Default

I prefer 110-125 grain bullets BUT since snubby .38 sights are calibrated for 158 grain bullets, my lighter bullets shoot low.
Reply With Quote
  #4  
Old 07-04-2017, 11:20 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2012
Location: Reno Nv
Posts: 6,513
Likes: 201
Liked 3,597 Times in 1,888 Posts
Default

Since a "All Steel" 38 will normally take more pressure than a standard J frame of old...........

you can up the fps a little to maybe get a load that works for you.
My AS 38 snub does well with the 148 with Bullseye but it also
does great with a lead 158gr RN from 572 to 648fps with several powders.
The 158gr Lswc works from 580 up to 740fps in the mild loads.
Medium hot loads up to 792fps are ok for a hand full of power
and any thing over 800fps is going to need your attention.

I just like the large 158gr since you have a lot of options with this bullet from powder puff
up to "Hang on" loads, which are fun for some of us.

Have fun.
Reply With Quote
  #5  
Old 07-04-2017, 11:58 PM
Eddietruett Eddietruett is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Dec 2016
Location: South Carolina
Posts: 419
Likes: 137
Liked 648 Times in 213 Posts
Default

For every day fun shooting I use 158gr Plated SWC or Target HP from Xtreme or Berrys over 3gr Bullseye. For serious work I like 125gr Speer GD HP over 7.5gr HS-6. This is a +P load and are very accurate in my K frame snubbies. Have not tried in a J frame but I think it would be a handful.
Reply With Quote
  #6  
Old 07-05-2017, 01:02 AM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 5,319
Likes: 262
Liked 1,689 Times in 1,034 Posts
Default

A replicate FBI Load using HS-6 and a magnum primer @+P pressures.
__________________
Freedom is never free!!
Reply With Quote
  #7  
Old 07-05-2017, 01:06 AM
38SPL HV 38SPL HV is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Apr 2016
Location: Northern Nevada
Posts: 494
Likes: 5
Liked 154 Times in 103 Posts
Default

Standard velocity - 158 gr rnl 3.5 grs Bullseye ("Police Service")
+P - 158 gr LSWC or LSWCHP:
5.6 grs Power Pistol
4.5 grs W231
5.0 grs Universal

Loads within Speer Manual parameters.
Reply With Quote
  #8  
Old 07-05-2017, 01:06 AM
Benchrest1 Benchrest1 is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Jun 2017
Location: SoCal
Posts: 120
Likes: 138
Liked 108 Times in 57 Posts
Default

158 LSWC and 3.4 grs. of 231.
Reply With Quote
  #9  
Old 07-05-2017, 01:37 AM
Walkingwolf's Avatar
Walkingwolf Walkingwolf is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Apr 2017
Posts: 1,204
Likes: 1,128
Liked 1,182 Times in 587 Posts
Default

138 grain Bayou Bullets wadcutter 5.5 grains longshot 900fps 2 inch barrel.
Reply With Quote
  #10  
Old 07-05-2017, 02:05 AM
TomkinsSP's Avatar
TomkinsSP TomkinsSP is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: May 2017
Location: E of America's Great Lake
Posts: 1,825
Likes: 1,013
Liked 2,475 Times in 997 Posts
Default

A hard cast, flat base, 150 grain wadcutter, dropped from a H&G 244 mold. (I don't cast them, I buy them from Matt in Ar-Kansas.) I like them better than the Lymans because of their sharp, rather than beveled corners. 3.2 grains of BE. Roll crimp into the groove thoughtfully provided.
__________________
Certified Curmudgeon
Reply With Quote
The Following 2 Users Like Post:
  #11  
Old 07-05-2017, 04:20 AM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 24,035
Likes: 28,524
Liked 20,414 Times in 9,972 Posts
Default Heavier lead bullets.....

The heavier cast bullets to me are most consistently accurate in all my guns. I shoot very few jacketed bullets these days but those are 125 to 140 grain.

I like 135 grain, short barrel, Gold Dots for SD. Pushed from warm to max.
__________________
"He was kinda funny lookin'"
Reply With Quote
The Following User Likes This Post:
  #12  
Old 07-08-2017, 06:10 PM
Qc Pistolero Qc Pistolero is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: May 2016
Location: 30min SE Montreal
Posts: 1,207
Likes: 135
Liked 791 Times in 453 Posts
Default

Can't suggest a load for a steel snubby,mine is alu framed(mod 37).+P is if not ''verbotten'' at least not recommended.I cast my own swc(150gr old NEI mould that comes out lubed at 154gr),Put it on top of 3.8 Titegroup(chronoed at a little above 900fps out of a couple of 6''tube;guess must be still doing around 800 from the Lilliput tube).Accuracy is good for a shorty.The kick is not objectionnable.It will kill a bear provided the bear is very close,very calm and doesn't weight more than 168#s!
Qc
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 07-08-2017, 06:12 PM
eb07 eb07 is online now
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Sep 2012
Location: Arizona
Posts: 1,372
Likes: 1,692
Liked 2,873 Times in 820 Posts
Default

135gr Speer GDHP Short Barrel 6.4 gr Power Pistol 38 +P
Reply With Quote
The Following User Likes This Post:
  #14  
Old 07-08-2017, 06:29 PM
Hang-Fire Hank Hang-Fire Hank is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Mar 2009
Location: Central AZ
Posts: 347
Likes: 7
Liked 239 Times in 109 Posts
Default COMFORTABLE, BUT NOT TOO LIGHT

S&W 66-1, 2 1/2"

SAECO 160gr SWC over 3.3 grs. of Titewad in a 357 case.

Hank M.
Reply With Quote
  #15  
Old 07-08-2017, 07:37 PM
lrrifleman's Avatar
lrrifleman lrrifleman is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Oct 2015
Location: Southern NJ
Posts: 2,941
Likes: 4,148
Liked 1,650 Times in 873 Posts
Default

For my 36-6, I have 2 fun loads that can serve a defensive role.

Load 1 is a 150gr quench cast BNWC over 3.1 WW231, general paper punching.
Load 2 is a 160gr quench cast SWC over 3.3-3.5gr WW231.

For concealed carry, I use Hornady Critical Defense ammo (not +P), since my 36-6 is not recommended for +P loads.
__________________
Judge control not gun control!
Reply With Quote
  #16  
Old 07-08-2017, 08:10 PM
mtgianni mtgianni is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Feb 2007
Location: SW MT
Posts: 3,213
Likes: 1,506
Liked 1,635 Times in 915 Posts
Default

150-160 gr cast and 3 gr Bullseye.
__________________
Front sight and squeeze
Reply With Quote
The Following User Likes This Post:
  #17  
Old 07-08-2017, 09:12 PM
Qc Pistolero Qc Pistolero is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: May 2016
Location: 30min SE Montreal
Posts: 1,207
Likes: 135
Liked 791 Times in 453 Posts
Default

Quote:
Originally Posted by mtgianni View Post
150-160 gr cast and 3 gr Bullseye.
Sounds good to me.Ever had it chronoed?Just curious here.
Qc
Reply With Quote
  #18  
Old 07-10-2017, 12:59 AM
mtgianni mtgianni is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Feb 2007
Location: SW MT
Posts: 3,213
Likes: 1,506
Liked 1,635 Times in 915 Posts
Default

Yea and it is written down somewhere. I am in the latter part of my last move preceding the funeral home and we were i a rental for 1 year previous. Take a bit to find it. IIRC it was just over 850 fps 6" K frame.
__________________
Front sight and squeeze
Reply With Quote
  #19  
Old 07-10-2017, 02:26 AM
LoboGunLeather's Avatar
LoboGunLeather LoboGunLeather is online now
US Veteran
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2008
Location: Colorado
Posts: 3,109
Likes: 799
Liked 8,118 Times in 1,581 Posts
Default

All time favorite is 158 LSWC with 5.0 Unique, standard primer. My 1976-vintage Model 19 has probably pushed out close to 100,000 of these and remains as tight and accurate as it was when new. Model 10 3" and Model 64 2" shoot very well with these as well.
Reply With Quote
The Following 2 Users Like Post:
  #20  
Old 07-10-2017, 02:51 AM
rockquarry rockquarry is online now
Member
 
Join Date: Aug 2005
Posts: 1,328
Likes: 2
Liked 942 Times in 538 Posts
Default

I'v chronographed some loads using a cast Hensley & Gibbs #51 160-grain SWC in a 2" barrel. My notes don't indicate whether these were fired in a Detective Special or a Chief, but I'm pretty sure it was a Chief.

3 Bullseye - 648
3.3 Bullseye - 683
3.5 Bullseye - 730 good accuracy
3.5 Titegroup - 702
4.3 231 - 729 good accuracy

Same loads also chronographed in a 6" K-38. Velocities are approximately 100 - 125 fps greater than in a 2" gun.
Reply With Quote
  #21  
Old 07-10-2017, 09:25 AM
cowboy4evr cowboy4evr is online now
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 1,171
Likes: 56
Liked 1,060 Times in 543 Posts
Default

My favorite 38spl load for many years was 5.0 grs of Unique w/158gr cast bullet . It was what Skeeter Skelton called a " good working mans load " . If I wanted a bit more power , 5.4grs / Unique did the trick . Before Unique I used Bullseye , even in 357 as it was the only powder I had / could afford at the time . I didn't get magnum performance but the accuracy was great and a bit more power too .
Reply With Quote
The Following User Likes This Post:
  #22  
Old 07-10-2017, 09:58 AM
at_liberty at_liberty is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Feb 2014
Location: upstate South Carolina
Posts: 1,030
Likes: 24
Liked 484 Times in 252 Posts
Default

4.2 HP-38 with 125 gr cast TCFP, BHN 12 shoots to POA from my 3 1/2" Stallion and Lightning. I don't make any distinction for my all steel 38 Snub carry, because I only use purchased SD ammo, invariably Winchester Train and Defend.

Last edited by at_liberty; 07-10-2017 at 10:07 AM.
Reply With Quote
  #23  
Old 07-10-2017, 02:39 PM
pete950's Avatar
pete950 pete950 is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Sep 2008
Posts: 1,172
Likes: 1,069
Liked 241 Times in 154 Posts
Default

3.2 of Bullsey with a 148 grain DEWC
2ND IS same bullet with 3.8 of BE86
Reply With Quote
The Following User Likes This Post:
  #24  
Old 07-10-2017, 07:10 PM
USSR USSR is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2010
Location: Finger Lakes Region of NY
Posts: 382
Likes: 0
Liked 175 Times in 87 Posts
Default

Quote:
Originally Posted by ArchAngelCD View Post
A replicate FBI Load using HS-6 and a magnum primer @+P pressures.
Bullet on the right is ArchAngelCD's load.

Don
__________________
NRA Cert. Reloading Instructor
Reply With Quote
  #25  
Old 07-13-2017, 04:49 PM
Service Rifleman1 Service Rifleman1 is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Dec 2016
Posts: 50
Likes: 1
Liked 6 Times in 5 Posts
Default

I have been duplicating the FBI load using some Hornady LSWCHP's with some Unique 5.1 grain and Titegroup loads. I shot up my supplies of Hornady and I have some 158 SWC from Hunter's Supply with Titegroup 3.8 grains standard pressure loads. I also loaded some Nosler 158 JHP with 3.9 Titegroup. Winchester 125 JHP with 4.5 gr Titegroup. The loads all were accurate at a range of 10 yards. The 642-2 is not all steel and the grips I had on were Factory J frame wood grips that are checkered. The Airlight was pretty snarky in recoil and I will drop down and work up to a load that shoots to the point of aim. I have spoken to Mr Craig Spegel about ordering some of his bootgrips and I have read great things about the shootability of his grips. I have alot of +p loads that I worked up for my 64-5 Smith but I think I will stick to regular pressure loads for awhile with this Airlight. Makes me wonder how the all steel versions shoot? Have to look for an original M49 or the 649, and 640 versions to compliment the 38's I have. Safe shooting.
Reply With Quote
  #26  
Old 08-07-2017, 05:55 PM
Bakebfr480 Bakebfr480 is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Jul 2017
Posts: 449
Likes: 35
Liked 302 Times in 172 Posts
Default

12.5 grs. of 2400 with Elmer's bullet.
Reply With Quote
The Following 2 Users Like Post:
  #27  
Old 08-12-2017, 05:37 PM
Fide686's Avatar
Fide686 Fide686 is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Dec 2016
Location: Near Rochester NY
Posts: 74
Likes: 4
Liked 139 Times in 29 Posts
Default

158 gr berrys 4.4 gr hp-38 nice load
Reply With Quote
  #28  
Old 08-12-2017, 07:00 PM
dubshooter dubshooter is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2010
Location: Arizona
Posts: 394
Likes: 71
Liked 825 Times in 231 Posts
Default

3.5 Bullseye under 158 SWC.


Defense I carry Gold Dot short barrels in my 640. Really pleasant to shoot
Reply With Quote
  #29  
Old 08-12-2017, 07:14 PM
oneounceload oneounceload is offline
Suspended
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Apr 2009
Location: FL
Posts: 1,162
Likes: 1,354
Liked 1,381 Times in 612 Posts
Default

A 158 gr LSWC for practice or JHP using Bullseye, 231, Universal, WST, Clays, and a few others.......
Reply With Quote
  #30  
Old 08-12-2017, 10:36 PM
riverrat38 riverrat38 is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2011
Location: La Conner, WA
Posts: 1,218
Likes: 1,827
Liked 658 Times in 373 Posts
Default

My snub is a M442.
125gr Xtreme plated flat point over 4.8 gr HP-38.
I also load the same bullets over 5.0 gr Trail Boss.

Best,
Rick
Reply With Quote
The Following User Likes This Post:
  #31  
Old 08-12-2017, 11:21 PM
Rpg Rpg is online now
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: May 2013
Location: Denver area
Posts: 3,334
Likes: 7,166
Liked 5,254 Times in 1,900 Posts
Default

My preference is 158 gr hard cast swc and Unique to a bit over 800 fps in my M38's.
Reply With Quote
  #32  
Old 08-17-2017, 12:25 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2012
Location: Reno Nv
Posts: 6,513
Likes: 201
Liked 3,597 Times in 1,888 Posts
Default

I just tried the 158gr Lwc in my 6" 38 special with the new BE-86.
There is not much data out there but I loaded up in the middle of Alliants data
to see what turned out on the drawing boards with the
148, 110,125 and 158 standard target bullets.

The 158gr lead with 5.2 grs of BE-86 out of the 6" 686 revolver
turned out 951fps and a POA group that I could live with.

In my 38 snub nose a full load of Bullseye with my new box of 148gr BBwc
hit at POA and was right at one inch, with no flyers, off a bag.
Sorry no chrony with this test.
Reply With Quote
  #33  
Old 10-23-2017, 02:58 PM
wrkerr's Avatar
wrkerr wrkerr is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Feb 2005
Location: Puget Sound, WA
Posts: 59
Likes: 2
Liked 116 Times in 23 Posts
Default

Favorite load for .38 Spl................

Cramer mold, 143 gr wadcutter sized .358" pushed by 2.7 gr of Bullseye.

This has been my load of choice for ALL .38's; steel, alloy, j,k,l, and n frame for the past 40 years. (Only recently tried powder coating---jury is still out.)

I haven't found anything that beats it.
Attached Thumbnails
Favorite .38 SPL Snubbie loads?-img_2894-640x480-jpg   Favorite .38 SPL Snubbie loads?-img_2895-640x480-jpg  
Reply With Quote
  #34  
Old 10-23-2017, 03:27 PM
Targets Guy's Avatar
Targets Guy Targets Guy is offline
US Veteran
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Jul 2013
Location: Southwest Iowa
Posts: 7,249
Likes: 1,445
Liked 11,375 Times in 3,460 Posts
Default

148 grain wadcutters

__________________
Mike
S&WCA #3065
Reply With Quote
  #35  
Old 10-23-2017, 03:55 PM
oneounceload oneounceload is offline
Suspended
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Apr 2009
Location: FL
Posts: 1,162
Likes: 1,354
Liked 1,381 Times in 612 Posts
Default

For you guys shooting the new plastic-coated bullets - are you seeing a lot of plastic residue in the barrels? At my indoor range the standard lubed lead swc smokes a LOT, but I'd put up with that over trying to remove melted plastic from my bore......
Reply With Quote
  #36  
Old 10-23-2017, 04:28 PM
mikld's Avatar
mikld mikld is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: May 2012
Location: S. Orygun
Posts: 1,268
Likes: 781
Liked 609 Times in 389 Posts
Default

I'm using max. loads of W231 under a cast DEWC. I keep this as my "house gun load". I may try this bullet with some CFE Pistol soon...

I've PCed and fired prolly 1,500 coated bullets in all my handguns and some PCed bullets in a couple of my rifles. I have experience no excessive residue nor any fouling from the powder coat, and clean up is about the same as jacketed...

Last edited by mikld; 10-23-2017 at 04:32 PM.
Reply With Quote
  #37  
Old 11-03-2017, 09:29 AM
old&slow old&slow is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Aug 2011
Location: central, Ohio
Posts: 1,097
Likes: 911
Liked 1,152 Times in 500 Posts
Default

I'm not sure if it's my favorite load yet. I just started working with it, but it looks promising.

A 145 gr. LSWCHP from GT Bullets with 4.7 grs of Unique.
Over my chrono it's averaging 800 to 820 fps out of a 2 1/8" barrel m60.
It went thru 3 one gallon milk jugs full of water and stopped in the 4th jugs.

Actually was planning on using these in my 642.
Attached Thumbnails
Favorite .38 SPL Snubbie loads?-img_0506-2-jpg  

Last edited by old&slow; 11-03-2017 at 09:35 AM.
Reply With Quote
  #38  
Old 11-03-2017, 08:55 PM
red1 red1 is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: May 2017
Posts: 49
Likes: 33
Liked 10 Times in 10 Posts
Wink Not S&W but still a snub

http://smith-wessonforum.com/139803114-post67.html
Reply With Quote
  #39  
Old 11-03-2017, 09:27 PM
nachogrande nachogrande is offline
Suspended
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Nov 2012
Location: Gods waiting room, W/C FL
Posts: 1,869
Likes: 1,613
Liked 2,005 Times in 929 Posts
Thumbs up NOT JUST FOR SNUBS.

Am glad I like the 148 gr dewc's cuz I bought 3,000 of them & may do it again unless I find a heavier dewc. 2.7ish grs of bullseye & I can't complain from the 640, 4" mdl 10, 4" mdl 681, or 2 3/4" speed six.
Reply With Quote
  #40  
Old 11-06-2017, 10:19 AM
sbrmike sbrmike is offline
Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Jul 2014
Location: Potter County, PA
Posts: 106
Likes: 19
Liked 65 Times in 24 Posts
Default

I see a few Unique loads listed here 4.7 - 5.0 grains with a 158 LSWC. I have always loaded 4.5 grains in my J-Frame 38's. I currently have an old Chiefs Special and a model 60, but used it in older Airweights as well. I never liked shooting the Airweights as I only like wood grips and the recoil felt like I was hitting a telephone pole with a baseball bat! Stung my hand! I may try bumping my Unique loads up a bit as I no longer own Airweights.
Reply With Quote
  #41  
Old 11-08-2017, 07:41 AM
Mule88's Avatar
Mule88 Mule88 is offline
SWCA Member
Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads? Favorite .38 SPL Snubbie loads?  
Join Date: Jul 2004
Location: Vandalia, Ohio
Posts: 1,722
Likes: 217
Liked 200 Times in 119 Posts
Default

Been using 135gn Gold Dot behind 5 gns of Universal, also same load behind 150 gn cast excellent accuracy.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
50 gr and 90 gr HP loads in 2" snubbie Newburydave S&W Revolvers: 1980 to the Present 16 11-06-2016 11:32 AM
148WC in snubbie target loads? Prof_Fate Reloading 19 08-13-2012 12:01 AM
Favorite N-frame snubbie CCW shoulder holster? hoser Concealed Carry & Self Defense 8 10-16-2010 01:08 AM
whats your favorite defensive h.p from a snubbie? 681ismyfavorite S&W Revolvers: 1980 to the Present 31 04-11-2010 04:31 AM
what are your favorite loads for your .38 snubbie? Crazy K38 Reloading 36 08-20-2009 01:30 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:19 PM.


S-W Forum, LLC 2000-2015
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)