Smith & Wesson Forum

Go Back   Smith & Wesson Forum > >


Reply
 
Thread Tools Display Modes
  #1  
Old 03-24-2018, 01:49 PM
Shotgun64 Shotgun64 is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Feb 2018
Location: Manitoba
Posts: 5
Likes: 0
Liked 3 Times in 3 Posts
Default 44 magnum bullets

I just bought 44 mag dies and was wondering what was the most accurate bulk bullet for reloading, guys are shooting out of a smith? I just bought a S&W 629 hunter 7.5 brl. Was going to try 2400 powder first?? Thx
Reply With Quote
  #2  
Old 03-24-2018, 02:12 PM
mikld's Avatar
mikld mikld is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: May 2012
Location: S. Orygun
Posts: 1,362
Likes: 851
Liked 688 Times in 425 Posts
Default

I'm not an expert on jacketed bullets as my 44 Magnums digest a largely cast bullet diet. Some haven't seem a jacketed bullet as long as they have been in my possession. Early on, in '88, I fed my 629 loads of Nosler 240 JSP with 2400 and AA9 and they worked exceptionally well. I soon discovered bullet casting and now 99% of my 44 Magnum reloads use cast lead bullets. The all around best bullet for my 5, 44 Magnums is Ranch Dog's design 240 gr. RNFP which feeds 100% in my Puma and is accurate in my Ruger SBH, Dan Wesson 44H, S&W 629 and sometimes I shoot in my 10" Contender...

If you're not a seasoned reloader try a load right out of your manual with a 240-250 gr JHP (or LSWC) and 2400. This load combo has prolly been used 3 bizillion times...

Last edited by mikld; 03-24-2018 at 02:15 PM.
Reply With Quote
  #3  
Old 03-24-2018, 02:18 PM
Dieseltech56's Avatar
Dieseltech56 Dieseltech56 is offline
SWCA Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jul 2017
Location: Pittsburgh PA
Posts: 498
Likes: 401
Liked 630 Times in 274 Posts
Default

I shoot mostly cast bullets too but before I started casting my own I found the 250gr Sierra FPJ was a very accurate bullet in my 629-4 and my Rossi 92. With that accuracy comes price though.
Reply With Quote
  #4  
Old 03-24-2018, 02:42 PM
Fishinfool Fishinfool is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Feb 2011
Location: Central PA
Posts: 2,349
Likes: 2,858
Liked 4,144 Times in 1,324 Posts
Default

Problem with a lot of load combinations is what may shoot well out of one gun may not be so hot out of another.

Most all major brands of jacketed 240 grain bullets should shoot well once a good load is found. I have usually had good success with Nosler, Hornady, and Sierra bullets to name a few. The 240 XTP is an excellent deer bullet. A lot of shooters have reported, in general, that plated bullets seem a little less accurate than a jacketed or good cast bullet. Coated cast are becoming very popular, and reportedly seem a little more accurate overall than plated as well.

When it comes to cast, it is important to match the bullet with the chamber throats for good accuracy and reduced leading. Most newer Smiths have relatively tight specs, so .430 / .431 should work well. Check yours by pushing a bullet through each throat by hand. They should be tight.

2400 is an excellent upper mid-range / full power powder. For cast bullets at fun level velocities, I have always had good luck with Red Dot and Win-231.

Larry

Last edited by Fishinfool; 03-24-2018 at 02:47 PM.
Reply With Quote
The Following 2 Users Like Post:
  #5  
Old 03-24-2018, 03:06 PM
Joni_Lynn's Avatar
Joni_Lynn Joni_Lynn is offline
US Veteran
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Mar 2005
Location: Some place else.
Posts: 2,852
Likes: 69
Liked 404 Times in 146 Posts
Default

I've found both Sierra and Hornady bullets to be quite accurate. My bullet of preference is the Sierra 210. Not available in bulk however. My cheaper substitute is the Remington 210 which I can get in 1k boxes. They aren't quite as accurate but close enough for what I do with them. When I was hunting I'd switch back to the 210 Sierra then. They both hit the same place with no sight adjustment needed. I use WW296 in my higher power loads.
__________________
Lynnie, Professional Pest

Last edited by Joni_Lynn; 03-24-2018 at 03:09 PM.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 03-24-2018, 07:46 PM
cowboy4evr cowboy4evr is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 1,313
Likes: 60
Liked 1,170 Times in 604 Posts
Default

A good 240 gr bullet , cast , plated , jacketed works well with 8.5 grs of Unique for a good " everyday " load in Smith 29's . It has plenty of power for most needs including target shooting . If you want something a little lighter , 6.5 -- 7.0 grs of 700X is real nice for about 900 fps . For long distance , flatter shooting , or for less recoil a 215 gr bullet works well .
Regards , Paul
Reply With Quote
  #7  
Old 03-24-2018, 07:56 PM
rwsmith's Avatar
rwsmith rwsmith is online now
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 25,218
Likes: 30,255
Liked 21,727 Times in 10,586 Posts
Default If you want just accuracy....

A heavy bullet with a light to warm load of a fast powder should get good results as a target load. You can move into 2400 or other magnum powder as you go up in the power scale. Magnum powders usually aren't quite as consistent as non magnum powders, especially at lighter loads.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #8  
Old 03-24-2018, 09:49 PM
loc n load loc n load is offline
SWCA Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jan 2013
Location: S/W Indiana
Posts: 1,189
Likes: 1,191
Liked 1,628 Times in 628 Posts
Default

A cast 245 gr SWC over 8 or 9 gr of Unique for everyday use, same bullet over 18 gr of 2400 for hunting or a 240 gr JHP with same charge of 2400. These loads have worked for me for 40 years, doing everything I needed done from flattening metallic sil. steel targets out to 200 yards or putting venison in the freezer.
Reply With Quote
The Following 3 Users Like Post:
  #9  
Old 03-24-2018, 10:01 PM
BigMoneyGrip BigMoneyGrip is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jan 2015
Location: Oxford, MS
Posts: 207
Likes: 72
Liked 148 Times in 79 Posts
Default

My Super Redhawk loves the 260gr Keith by Rim Rock over 18.5gr of 2400. They clock 1280fps and shoot really good.
Reply With Quote
The Following User Likes This Post:
  #10  
Old 03-25-2018, 12:53 AM
Benchrest1 Benchrest1 is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jun 2017
Location: SoCal
Posts: 166
Likes: 238
Liked 157 Times in 85 Posts
Default

I also use 8.5 grs. of Unique with 240 gr bullets. I've used
that combo for over 30 years.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 03-25-2018, 03:49 AM
rwsmith's Avatar
rwsmith rwsmith is online now
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 25,218
Likes: 30,255
Liked 21,727 Times in 10,586 Posts
Default PS: I forgot...

You can use .44 Special loads in a .44 magnum if you want a REALLY light load.
__________________
"He was kinda funny lookin'"
Reply With Quote
  #12  
Old 03-25-2018, 07:44 AM
cadmike cadmike is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: May 2006
Location: Southern Maine
Posts: 278
Likes: 35
Liked 525 Times in 168 Posts
Default

What loc n load said. I like Berry’s 240 grain hard cast LSWC over 8 to 9 grains of unique or universal.
Reply With Quote
  #13  
Old 03-25-2018, 07:48 AM
stansdds stansdds is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Apr 2007
Location: Virginia
Posts: 555
Likes: 57
Liked 485 Times in 287 Posts
Default

Quote:
Originally Posted by Shotgun64 View Post
I just bought 44 mag dies and was wondering what was the most accurate bulk bullet for reloading, guys are shooting out of a smith? I just bought a S&W 629 hunter 7.5 brl. Was going to try 2400 powder first?? Thx
Every firearm is a rule unto itself when it comes to accurate ammo and accurate reloaded ammo. What works well in mine, might be horrible in yours.

The first question I would ask of you, are you new to reloading?
Reply With Quote
  #14  
Old 03-25-2018, 10:11 AM
Harbinger_of_lead Harbinger_of_lead is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jul 2016
Location: Colorado
Posts: 93
Likes: 30
Liked 71 Times in 40 Posts
Default My Favorite

For 2400, I like to load 300gr XTP from hornady. I load in the middle of the range for Hornady load data.

Works amazingly well out of my 629 classic 5.5".

2400 is my current favorite for .44 mag
Reply With Quote
  #15  
Old 03-25-2018, 10:30 AM
jdlii's Avatar
jdlii jdlii is offline
Member
44 magnum bullets 44 magnum bullets  
Join Date: Jun 2009
Location: TN
Posts: 1,126
Likes: 1,324
Liked 1,609 Times in 561 Posts
Default

Good sound advice has been given by those who have responded. I just finished loading over 100 rounds to .44 special specifications yesterday and can't wait to make empty brass.

Follow the loads recommended in a current reloading manual and you won't go wrong. Try different loads to see what your revolver likes best. The Hornady XTP bullets, as previously stated, provide excellent accuracy and are my favorite for hunting with my .44 magnums and .357 revolvers.

Although I have only taken one deer, a 5 point buck, with my Classic DX, I always carry a .44 magnum with me with deer season is open in TN. I limit my shots to deer within 50 yards anything beyond that, and most are, receive the attention of one of my designated deer rifles.

Good luck and have fun!
Reply With Quote
  #16  
Old 03-25-2018, 11:31 AM
yfdcap's Avatar
yfdcap yfdcap is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jan 2012
Location: AZ
Posts: 380
Likes: 310
Liked 319 Times in 124 Posts
Default

Quote:
Originally Posted by loc n load View Post
A cast 245 gr SWC over 8 or 9 gr of Unique for everyday use, same bullet over 18 gr of 2400 for hunting or a 240 gr JHP with same charge of 2400. These loads have worked for me for 40 years, doing everything I needed done from flattening metallic sil. steel targets out to 200 yards or putting venison in the freezer.
Same here for almost the same amount of time. I did switch to powder coated bullets a while back. I am still amazed at the ease of clean-up after a good shooting session.
Reply With Quote
  #17  
Old 03-25-2018, 12:04 PM
StakeOut's Avatar
StakeOut StakeOut is offline
US Veteran
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Feb 2016
Location: NW of Austin Texas
Posts: 2,299
Likes: 925
Liked 3,410 Times in 1,228 Posts
Default

240gr LSWC bullets coated or lubed from Summers Enterprises

5.0gr of Bullseye or 8.5gr of Unique

Standard LP primer

44 Magnum case

1.600" OAL
__________________
NEVER GIVE UP YOUR GUN
Reply With Quote
  #18  
Old 03-25-2018, 12:22 PM
silentflyer silentflyer is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jan 2012
Location: Roanoke, Va
Posts: 1,599
Likes: 1,219
Liked 976 Times in 527 Posts
Default

What would Skeeter shoot?
Reply With Quote
  #19  
Old 03-25-2018, 12:27 PM
reddog81 reddog81 is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Sep 2014
Location: IA
Posts: 917
Likes: 221
Liked 709 Times in 374 Posts
Default

240 grain coated lead and sized to fit the throat.
Reply With Quote
  #20  
Old 03-25-2018, 12:35 PM
amazingflapjack amazingflapjack is offline
US Veteran
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: May 2010
Location: North Central Florida
Posts: 4,988
Likes: 18,321
Liked 4,482 Times in 1,956 Posts
Default

I like some of the above, but I have settled on a 240 grain hard cast led semi wad cutter over 10-12 grains of Unique with a Winchester large pistol primer, which is the only one rated for both standard and magnum loads. This is the load I would use universally, because I practice with what I carry, but if you want a milder round to target shoot with, the above recommendations of 8.5 grains of Unique would work well with this same combination. Go safely.
Reply With Quote
  #21  
Old 03-25-2018, 08:39 PM
Qc Pistolero Qc Pistolero is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: May 2016
Location: 30min SE Montreal
Posts: 1,356
Likes: 137
Liked 899 Times in 523 Posts
Default

I'd say try to find a caster in your area(freight cost being what it is and lead is heavy,the closer you find the better).If you can get a bullet in the 215/225gr range,10gr Unique will give you around 1150/1200fps and ,while you will know it when you touch one off,it is easy on both the gun and the shooter.
If you want something with more ''gusto'',a full charge of H110 developped for a 255 or 265 gr bullet will yield you above 1300fps and will draw attention on the firing line.Not recommanded for indoor ranges though!
Have fun.
Reply With Quote
  #22  
Old 03-26-2018, 11:20 AM
BigBill's Avatar
BigBill BigBill is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jan 2011
Location: north america
Posts: 11,095
Likes: 1,417
Liked 9,782 Times in 4,080 Posts
Default

For 357 magnum, 41 magnum, 44 magnum jacketed bullets I use 2400 powder. For leadcast in all of them it’s Unique powder in all of them. I keep it simple down to two powders. My 45acp uses Unique also.
Reply With Quote
  #23  
Old 03-26-2018, 11:48 AM
snowman snowman is offline
Member
44 magnum bullets  
Join Date: Jan 2003
Location: Rural NW Ohio
Posts: 2,746
Likes: 2,823
Liked 1,204 Times in 645 Posts
Default

Like Joni Lynn, I've used Remington 210 SJHPs, and my Classic DX will cloverleaf them from a rest at 50yds if my eyes function properly. I use a near-max charge of H110. I'm satisfied with that sort of accuracy. As others have said, different guns often give different results, so testing is advisable.

Best wishes,
Andy



P.S. Zero bullets are very consistent and less expensive than the major manufacturers. I have used their .357s for a number of years and been more than satisified -you might give their .44s a try.
Reply With Quote
  #24  
Old 03-26-2018, 12:59 PM
TAROMAN's Avatar
TAROMAN TAROMAN is offline
US Veteran
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 5,873
Likes: 6,961
Liked 6,461 Times in 2,074 Posts
Default

OP doesn't mention the intended use for his .44 Magnum.
As mentioned, a 240 grain lead semiwadcutter over 8.5 Grains of Unique will do it all. Target, pins, up to deer.
If he's going after big bears or IHMSA silhouettes, that's where the specialist loads come in.

Two of my favorite loads:
LSWC 240 Unique 8.5 LO:1029 HI:1064 AVG:1048 ES:38 SD:9.84
LRNFP 185 Red Dot 6.5 LO:829 HI:842 AVG:836 ES:13 SD:4.43
__________________
-jwk-
US Army '72-'95
Reply With Quote
  #25  
Old 03-30-2018, 06:28 AM
Mule88's Avatar
Mule88 Mule88 is offline
SWCA Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jul 2004
Location: Vandalia, Ohio
Posts: 1,726
Likes: 223
Liked 207 Times in 122 Posts
Default

For Whitetails I've used Speer 210 Gold Dot behind H110, from my Smiths its doing 1 1/2 to 2" from a rest at 50 yds.
Reply With Quote
The Following 2 Users Like Post:
  #26  
Old 03-30-2018, 02:02 PM
jcelect jcelect is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Mar 2000
Location: Monroeville, Ohio,USA
Posts: 1,483
Likes: 289
Liked 1,727 Times in 477 Posts
Default Ball Powder!

I have found that ball powder measures more accurate thru most powder dispensing devices. Therefore I usually use Hogdon powders and my favorite in the 44 mag is H110. I have been hunting deer in Ohio with a 29 Silhouette ever since they made pistols legal to hunt with. I have many deer kills at over 100yds using the 240gr XTP Hornady bullets. What ever bullet/powder combo you use, stick to the books!
jcelect
Reply With Quote
The Following 2 Users Like Post:
  #27  
Old 03-30-2018, 08:54 PM
Fishslayer's Avatar
Fishslayer Fishslayer is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jan 2010
Location: San Diego, PRK
Posts: 8,024
Likes: 8,435
Liked 8,858 Times in 3,103 Posts
Default

Quote:
Originally Posted by mikld View Post
Early on, in '88, I fed my 629 loads of Nosler 240 JSP
The 240gr Nosler JSP is my go-to with a load of H110.
__________________
you can keep your gun. Period.
Reply With Quote
  #28  
Old 03-30-2018, 10:31 PM
BC38's Avatar
BC38 BC38 is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Nov 2013
Location: Spokane, WA
Posts: 6,084
Likes: 261
Liked 6,657 Times in 2,796 Posts
Default

Quote:
Originally Posted by rwsmith View Post
You can use .44 Special loads in a .44 magnum if you want a REALLY light load.
Or even better yet, load 44 mag brass with a top-of-the-powder-range (or maybe 1/10th gr over) 44 special recipe.
Reply With Quote
  #29  
Old 03-30-2018, 11:01 PM
cowboy4evr cowboy4evr is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 1,313
Likes: 60
Liked 1,170 Times in 604 Posts
Default

For max loads in 44 magnum using a 240 gr bullet , cast , jacketed etc . I prefer IMR 4227 . I give up a little velocity but it’s much easier on the gun and the shooter . I always use a FULL magnum primer with this powder. Regards , Paul
Reply With Quote
The Following User Likes This Post:
  #30  
Old 03-30-2018, 11:46 PM
sjs sjs is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Sep 2003
Location: SC
Posts: 154
Likes: 315
Liked 49 Times in 33 Posts
Default

My 629 likes 240 grain Hornady XTP for accuracy and either targets or hunting, and 240 grain Berrys Plated Flat Nose for pretty good accuracy for targets. I load both over medium to high loads of 2400, or high loads of H110.
Reply With Quote
  #31  
Old 03-31-2018, 12:36 AM
amazingflapjack amazingflapjack is offline
US Veteran
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: May 2010
Location: North Central Florida
Posts: 4,988
Likes: 18,321
Liked 4,482 Times in 1,956 Posts
Default

You might want to pin die those cylinder charge holes-some of those competitor and hunter revolvers have .428 holes.
Reply With Quote
  #32  
Old 04-01-2018, 08:48 AM
daniel lawecki's Avatar
daniel lawecki daniel lawecki is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Nov 2012
Location: toledo ohio
Posts: 643
Likes: 683
Liked 741 Times in 323 Posts
Default

Found some cast wadcutters in the reloading bench. These are 200 grain and I use to shoot these about 10 or so years ago. So with the dies still in the press I'll load these over some Titegroup. I don't know which mold these are cast out of as I had a gentleman casting my bullets for me for years.
Reply With Quote
  #33  
Old 04-05-2018, 09:17 PM
cowboy4evr cowboy4evr is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 1,313
Likes: 60
Liked 1,170 Times in 604 Posts
Default

I have no info for wadcutters , as I only use semi wadcutters . But a light charge of Bullseye would probably work well , something around 4.0 grs .
Reply With Quote
  #34  
Old 04-05-2018, 09:29 PM
jerry52 jerry52 is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Sep 2009
Location: over by there
Posts: 31
Likes: 0
Liked 27 Times in 15 Posts
Default

296 and hard cast bullets are always fun
Reply With Quote
  #35  
Old 04-05-2018, 11:49 PM
mike campbell's Avatar
mike campbell mike campbell is offline
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Dec 2014
Location: rural western NY
Posts: 426
Likes: 47
Liked 997 Times in 233 Posts
Default

Quote:
Originally Posted by Shotgun64 View Post
........... was wondering what was the most accurate bulk bullet for reloading, guys are shooting out of a smith? .Thx
Zero 240JSP's. At less than $14 per hundred delivered to your door (free shipping) I don't know of a better option.
__________________
Carry.."hope" isn't a strategy
Reply With Quote
  #36  
Old 04-06-2018, 12:11 AM
rwsmith's Avatar
rwsmith rwsmith is online now
Member
44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets 44 magnum bullets  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 25,218
Likes: 30,255
Liked 21,727 Times in 10,586 Posts
Default Boy are you easily satisfied.....

Quote:
Originally Posted by snowman View Post
...I've used Remington 210 SJHPs, and my Classic DX will cloverleaf them from a rest at 50yds if my eyes function properly.... I'm satisfied with that sort of accuracy....

Best wishes,
Andy



P.S. Zero bullets are very consistent and less expensive than the major manufacturers. I have used their .357s for a number of years and been more than satisified -you might give their .44s a try.
Cloverleaf at 50 yards? I think I'd be satisfied with that.

And I agree about the Zero bullets. I was kind of amazed at their quality.
__________________
"He was kinda funny lookin'"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
.44 Magnum 240g bullets samandglove1 Reloading 40 01-25-2017 04:41 AM
500 S&W Magnum Bullets & Brass bluetopper Accessories/Misc - For Sale or Trade 0 05-11-2015 07:30 PM
WTB .41 Magnum Bullets jimmyj WANTED to Buy 1 05-23-2014 03:00 PM
357 Magnum with gas check bullets MikeyB Reloading 9 04-30-2013 03:16 PM
Federal .41 magnum box o' bullets rm06 Accessories/Misc - For Sale or Trade 2 09-12-2009 09:16 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:39 AM.


Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
S-W Forum, LLC 2000-2018
Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)