Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #51  
Old 03-25-2018, 03:13 PM
AlHunt AlHunt is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Jun 2014
Posts: 2,317
Likes: 5,374
Liked 2,708 Times in 1,239 Posts
Default

I'll only say this: Real Men only shoot factory ammo when they need more cases.

I know, I know, but that's just how it is.

Also, bullet casting raises testosterone levels. Proven fact.
__________________
Just Say No - To Social Media
Reply With Quote
The Following User Likes This Post:
  #52  
Old 03-25-2018, 03:31 PM
argon18smith's Avatar
argon18smith argon18smith is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Oct 2017
Location: Kenora, Canada
Posts: 320
Likes: 68
Liked 118 Times in 72 Posts
Default

I enjoy reloading and I have the time to do it. I can load 100 rounds of 9mm in 8 minutes. As most of the reloaders here have said, we do not save money but we do shoot a lot more for the same amount of money.
I was up to 700 rounds per week last summer of all calibres. Can't beat a good day at the range.
Reply With Quote
  #53  
Old 03-25-2018, 04:15 PM
StakeOut's Avatar
StakeOut StakeOut is offline
US Veteran
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Feb 2016
Location: NW of Austin Texas
Posts: 3,090
Likes: 1,351
Liked 4,938 Times in 1,730 Posts
Default

I buy 90%+ of my reloading components from reloaders reducing inventory or getting out of shooting/reloading pistol.

Average is about $20/lb for Alliant Bullseye,Unique and 2400 while Titegroup can be about $14/lb

Primers are about $20/1000 +/-

Bullets are the most expensive component so that's the part you need to pay the most attention to.

You can get up to around 30 reloadings from a brass case so putting a price on brass is hard if some were bought new,some bought as once fired and many free range pickups.

If you have a very cheap or free source of lead casting may be an option otherwise shop for the best buys but don't forget to look at the shipping cost for this heavy item.

My 4 hole Lee Turret Press =$100
Lee 4 die carbide sets = $35
Lee Auto Disk Pro Powder Measures = $35
Lee extra Risers = $7.50
Lee extra Turrets = $7.50
Lee Safety Prime = $16
RCBS 10/10 scale = $80
__________________
NEVER GIVE UP YOUR GUN

Last edited by StakeOut; 03-25-2018 at 04:17 PM.
Reply With Quote
The Following User Likes This Post:
  #54  
Old 03-25-2018, 04:34 PM
TomkinsSP's Avatar
TomkinsSP TomkinsSP is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: May 2017
Location: E of America's Great Lake
Posts: 2,774
Likes: 1,416
Liked 4,377 Times in 1,654 Posts
Default

(Added deleted math)

Make 750 rounds vs buy 750 rounds factory .38 S&W special. Costs from my LGS today, $0.54/round Remington 148 grain LHBWC high to $0.34/round GBW 158 grain LRNFP low.

Handloads using Hornady LHBWC $0.33/round first 750, thereafter $0.114/round high to Local cast 150 grain LDEWC $0.274/round first 750 then $0.094 afterwards.

Using 750 rounds (15 boxes as amortization point for durable items: Lee Handpress $38, Lee 4 piece die set $45, Lee Hand Primer $12, and 100 cases Starline brass $18.

First several thousand rounds I loaded I cleaned deprimed cases with hot, hot, hot water in baggie, shaking vigorously.

Distributing per round cost of One Pound Bullseye $18 (2,500 loads of 2.8 grains, which the yellow dipper dips), 1000 primers $26, and $26/250 Hornady LHBWC or locally cast 150 grain LDEWC $15/250.

So looking at out of pocket cost, you CAN buy one box for $17 to $27. That is $204 to $324 per year (600 rounds).

Handloading you buy $113 worth of durable equipment ($98 if you have some brass) and $89 to $122 worth of expendables ($187 to $235 total) to complete 750 rounds, you have made 25 percent more ammo and you have powder and primers (for 1,750 and 250 rounds) on hand.
__________________
Certified Curmudgeon

Last edited by TomkinsSP; 03-25-2018 at 11:52 PM. Reason: Retyped deleted math
Reply With Quote
The Following 2 Users Like Post:
  #55  
Old 03-25-2018, 06:53 PM
Wise_A Wise_A is offline
Banned
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: May 2016
Posts: 3,121
Likes: 2,661
Liked 4,324 Times in 1,793 Posts
Default

TSP has the math about right. The margin for reloading .38 Spl is enormous. The only cartridge which is even more "profitable" is .44 Magnum.

$35/500 for 158-grain LSWCs (includes shipping, MBC)
$21 for a pound of Bullseye dished out at 2.8gr per
$22/1000 for primers bought online for zero hazmat
------
$5.02 per 50/box

The cheapest CCI Blazer aluminum-cased TMJ garbage on MassAmmo goes for $12/box, plus $12 flatrate shipping which we'll just forget about for fun. My state doesn't allow online ordering unless it's received by an FFL, which can cost anywhere from "free" (I still have to drive to the guy and hope he remembers he likes me) to $10, to as much as $35 or $50.

So that's $7 a box saved for most of you. A hell of a lot more for me. Remember, I either pay a $35-$50 tariff for every shipment, or I burn 3-4 gallons of gas and 45 minutes each way driving to the good FFL.

Now, I can easily reload 150/hr on my turret press. If you figure in the inordinate amount of screwing around, organizing, and maintenance I do, I'm looking more at 100/hr to produce really high-quality, matched-headstamp ammunition. So I can save $14-$21 in an hour, and shoot some really great ammo instead of embarrassing factory garbage. And in my situation, that 1.5 hours I didn't spend driving to pick up a case is worth 225 reloading rounds by itself.

Stepping up to .357 Magnum loads only costs another $0.50 to $.0.75.
Reply With Quote
The Following User Likes This Post:
  #56  
Old 03-25-2018, 08:09 PM
Qc Pistolero Qc Pistolero is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: May 2016
Location: 30min SE Montreal
Posts: 2,026
Likes: 150
Liked 1,540 Times in 841 Posts
Default

If you're looking at saving $$,at 300rds/year,keep buying factory ammo(little trick here;you can sell the once fired brass to some friends that'll bring the cost down).
If you are the kind of guy who likes to get the most out of your tools,reload.
The thing is if you don't like to reload but are doing it just to save $$,don't ;because since you don't like it,you won't load quality ammo and get frustrated doing it.
Reloading,like casting is something you must like,thus feel like you are doing something more than the factory is able to deliver to you in a box of purchased ammo.
Have fun doing it or don't do it.
Reply With Quote
The Following User Likes This Post:
  #57  
Old 03-25-2018, 08:24 PM
TomkinsSP's Avatar
TomkinsSP TomkinsSP is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: May 2017
Location: E of America's Great Lake
Posts: 2,774
Likes: 1,416
Liked 4,377 Times in 1,654 Posts
Default

JMO, if you HATE loading ammo don't. If you don't pay careful attention its just too easy to make a (potentially dangerous) mistake or just plain bad (inaccurate) ammo.

But it can be an enjoyable activity. And its really fun to see how accurate your custom jobs can be.
__________________
Certified Curmudgeon
Reply With Quote
  #58  
Old 03-25-2018, 08:32 PM
revshtr revshtr is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Mar 2018
Posts: 18
Likes: 11
Liked 5 Times in 5 Posts
Default

For the newbee now a days the start up cost can cost you a hellava lot. you better be shooting everyday or a lot on the weekends. I started loading with my dad at 12 yrs old .I'm 52 now a ton of reload stuff I can load whatever I want with the guns I own. It is a cost savings when you look at a cost for a box of ammo now a days.
Reply With Quote
  #59  
Old 03-25-2018, 08:51 PM
Walkingwolf's Avatar
Walkingwolf Walkingwolf is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Apr 2017
Posts: 1,624
Likes: 2,003
Liked 1,653 Times in 809 Posts
Default

It's not about saving money, though you might save a little. It for me is about the versatility to tailor rounds to fit my needs.
Reply With Quote
  #60  
Old 03-25-2018, 09:50 PM
rwsmith's Avatar
rwsmith rwsmith is online now
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 30,906
Likes: 41,494
Liked 29,147 Times in 13,778 Posts
Default I try to buy....

[quote=nachogrande;139977331][QUOTE=Thomas



The common "wisdom" among shooters that reloading ammo saves a ton of money is simply not true.
to get started in this endeavor you will need at a minimum an investment of $500.00 however $1,000.00 is not out of the question.

A quick ebay search for a rockchucker (quality) press Used 40$, & the first 1 listed. YES other items will be needed/wanted & the upgrades to newer/better is ongoing, depending on how INTO IT you become. Brass can be cleaned on the stovetop & dried in the oven. I can't remember the last time I trimmed my revolver brass. SURE in 35+/- years I probly have app 2500$ worth of STUFF. Some of it I actually use. Play Golf? How much have you spent on clubs (how many sets?), green fees, club memberships, caddies, carts, tips, silly looking clothes??? Fishing, hunting, scuba, photography, skiing, tennis, ALL THE ABOVE. [/quote]


I try to buy only what I need and started out with Lee Handloading tools. I'm a bit of an exception in that reloading REALLY saves me tons and I couldn't shoot like I wanted to without reloading

I will say though, that over 35 years of reloading I have broken down the last few years and bought some stuff to make reloading easier. Like:

A tumbler to clean cases since I use a lot of range brass. Faster than washing and drying them, and it does a good job of shining them up and making them 'purdy'. That's something I care about more for the people that shoot with me so they won't have to use dirty ammo.

An RCBS Uniflow measure to replace Lee scoops that I used in conjunction with the scale and a trickler.

A digital scale. An inexpensive Forster that is faster than my $20 Lee scale which is a good comparator/backup.

I think one thing is that time is no object to me. I'm on disability so I have plenty of time and I'm on SocSec so I don't have much money.



PS: If you really want an expensive hobby take up film photography. You ALWAYS need something new. I was in that but I had money then. But if you want to be a cheapskate like I am now you can have a lot of fun with a box Brownie.

PPS: Buying stuff over time eases the pain.
__________________
"He was kinda funny lookin'"

Last edited by rwsmith; 03-25-2018 at 09:55 PM.
Reply With Quote
  #61  
Old 03-25-2018, 09:59 PM
Jingles's Avatar
Jingles Jingles is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Mar 2016
Location: Murrieta, CA
Posts: 628
Likes: 76
Liked 1,112 Times in 356 Posts
Default

I've been reloading about 40 years. For the first 30 or so I used a single-stage Rockchucker. When I retired I bought myself a progressive loader, added a case feeder and a few other gizmos - best thing I ever did.

I reload 400 - 500 rounds a week so I disagree with those saying there is no cost savings. Probably 90% of my loading is .38 special. About every six months I switch over and do runs of .357, .44 mag and .45LC. Here in CA we have gone through several year-long ammo shortages but I always found components to roll my own.

I'm not one of those guys who find it an enjoyable hobby - more of a chore that isn't all that bad. I have convinced my wife that I am saving so much money reloading that I can buy more guns.
Reply With Quote
The Following User Likes This Post:
  #62  
Old 03-25-2018, 10:05 PM
nachogrande nachogrande is offline
Banned
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Nov 2012
Location: Gods waiting room, W/C FL
Posts: 3,736
Likes: 3,334
Liked 4,548 Times in 2,010 Posts
Default MONEY $$$$

YES app 2500$ or so into it now. IF I had paid full retail prices on all the ammo I have made in 35ish years, I could probly buy a very nice new truck, with that $.
Reply With Quote
  #63  
Old 03-25-2018, 10:27 PM
S&W Rover's Avatar
S&W Rover S&W Rover is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Apr 2007
Location: USA
Posts: 1,342
Likes: 1,255
Liked 1,134 Times in 521 Posts
Default

I like this thread a lot. It captures a lot of what I think about reloading. I reload more, thus I shoot more, but sometimes I can't remember if I reload to shoot, or shoot so I can reload.

Best is making ammo for specific purposes that can't be met with readily available commercial ammo. A very light .38 Special load (2.2 grains Trail Boss) under 148 grain HBWC makes long shooting sessions with an Airweight J frame enjoyable while building skill with a hard platform to master. 9.5 grains of PowerPistol under 125 grain JHPs make for a .357 round with basketball-sized blasts that are a hoot to shoot - and accurate. Etc. I'm a fan of lead bullets in particular for their accuracy across a range of loadings...
__________________
S&W Rover

Last edited by S&W Rover; 03-25-2018 at 10:32 PM.
Reply With Quote
The Following 3 Users Like Post:
  #64  
Old 03-25-2018, 11:30 PM
walnutred walnutred is online now
US Veteran
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Jan 2007
Location: Ohio
Posts: 4,450
Likes: 785
Liked 3,030 Times in 1,002 Posts
Default

Remember the ammo shortages that seem to happen every 4 years or so? I don't because I've been reloading since the early 70's. To me factory ammo is simply a source of brass. I reload some odd stuff, 8x56R for example, and some stuff others don't bother with, 38 Special and 9x19 for example. For me it's as much a much a matter of having the ammo available when I want it as it is about cost. Plus, I reload or cast when the weather or time does not justify going to the range. I predict that if you start reloading, within a year your shooting will go from 300 rds per year to twice that.
Reply With Quote
The Following User Likes This Post:
  #65  
Old 03-26-2018, 08:03 AM
daddy bear daddy bear is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Aug 2010
Posts: 332
Likes: 78
Liked 283 Times in 145 Posts
Default

I have had reloading equipment since the seventies. I have dies for most of the calibers that I own. I only load for the ones that I have to for reasons of ammo availability or bullet choice. .218 Bee and .219 Zipper, because factory fodder is not usually available and if it is, costs run near $100 a box of fifty for the 218 and half that or more for twenty 219s. I load .243 for bullet choice. Same for .44 Special and Magnum. I have components and dies, but I have never assembled any 9.3x62 ammo. Not sure why I have that caliber, but it is there if I need it.

The rest are back ups for hard times. I don't shoot much for recreation anymore, it is just nice to have the supplies on hand if factory ammo gets scarce.

My gun room is well stocked with factory ammo for numerous other calibers for rifle and handgun as well as shot shells.

Jack
Reply With Quote
  #66  
Old 03-26-2018, 09:46 AM
joeintexas's Avatar
joeintexas joeintexas is offline
US Veteran
Absent Comrade
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Dec 2010
Location: Pensacola, Fl
Posts: 4,388
Likes: 9,733
Liked 7,187 Times in 2,603 Posts
Default

I actually do enjoy the reloading process. Being retired it is one of the things that I can look forward to doing and not have to hurry through. I like making different loads and experimenting a little, plus my oldest son has a .222 triple deuce which is a bear to find ammo for, reloading answered that problem. As for saving, per round yes. Overall probably not so much as you do tend to shoot a bunch more. So do your kids, neighbors, cousins you didn't know you had....
Reply With Quote
  #67  
Old 03-26-2018, 03:16 PM
kbm6893 kbm6893 is offline
SWCA Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,625
Likes: 636
Liked 6,861 Times in 2,541 Posts
Default

Quote:
Originally Posted by Thomas15 View Post
If you like to shoot your firearms then handload.

If you are so broke that purchasing $50.00 worth of ammo 3 or 4 times a year is a financial hardship, handloading is not for you. I don't mean to be a jerk, but as a few other posters have stated, just asking the question "if handloading would sense" means to me that it doesn't.

As far as getting pleasure out of the activity, handloading is not for everyone and there is nothing romantic about it. The common "wisdom" among shooters that reloading ammo saves a ton of money is simply not true. But if you want to enjoy handloading as a hobby the best way to ensure that you do is to gather good tools right from the start. As with everything, you get what you pay for.

I have said it many times, some will argue that I'm wrong, but to get started in this endeavor you will need at a minimum an investment of $500.00 however $1,000.00 is not out of the question.

Someone will respond to this with a detailed post giving prices at the $250.00 level or proclaim buy used but when you add up all of the things needed to put together a reloading bench even $500.00 is really not enough. It is of course true that you can buy such and such *ee kit for $150.00 but that is not everything you need, probably most of what is in the kit is not what you want and 2 months into the hobby you will have spent more money on common hardware (nuts and bolts and lighting and storage) for your bench than the cost of that kit.
For .38 special alone: $130 for 1000 rounds vs $400 factory. $270 saved for every thousand. So 4000 rounds later at $1000 spent (and I surely didn’t spend that much) and you’re even.

If you shoot 1000 rounds a year (light shooter) for 4 years you’re even. And every year after that you’re way ahead.

For 9MM: $130 per thousand of your reloads vs $190 for factory. That’s now. Today. After Newtown, 9MM practice ammo nearly doubled. I remember $18 a box of 50 at Walmart. So $360 factory vs $130 for reloads. And waiting in line hoping they even had it. Then losing it because the guy in front of you had his 5 family member with him and they bought all 15.

Reloading does save you. No law saying you HAVE to shoot more. Some do. I shoot more. But not twice the amount more.

Buy 8 pounds of your powder and you can load 16,000 .38 special. Pick up a brick of primers here and there and bullets too. You’re immune from whatever comes next. And that’s the biggest reason to reload.

Last edited by kbm6893; 03-26-2018 at 03:18 PM.
Reply With Quote
The Following 2 Users Like Post:
  #68  
Old 03-26-2018, 03:38 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quality reloading equipment retains most of its value, although used. It isn't like a car where the value keeps dropping each year.
Reply With Quote
  #69  
Old 03-27-2018, 01:41 PM
dogdoc dogdoc is offline
Member
 
Join Date: Oct 2003
Location: Alabama
Posts: 558
Likes: 107
Liked 523 Times in 248 Posts
Default

When the dems take back over , ammo will dry up. Have plenty of components and will not be caught with my pants down again .reload!!
Reply With Quote
The Following User Likes This Post:
  #70  
Old 03-29-2018, 08:11 PM
mi2600 mi2600 is offline
US Veteran
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Dec 2011
Location: N. Muskegon, MI
Posts: 153
Likes: 21
Liked 41 Times in 23 Posts
Default

If I remember correctly, the OP already reloads shotgun so he is familiar with reloading in many respects and may have some of the basic tools.
Reloading for one or two calibers may or not save money. It's when you reload for several diverse calibers or for some of the "obsolete" calibers that it becomes financially beneficial.
Reply With Quote
  #71  
Old 03-29-2018, 09:15 PM
Protocall_Design Protocall_Design is offline
Vendor
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Jan 2010
Location: Kansas City area
Posts: 6,129
Likes: 53,433
Liked 13,435 Times in 4,240 Posts
Default

It also saves money if you shoot a lot of ammo.
Reply With Quote
  #72  
Old 03-29-2018, 09:23 PM
TAROMAN's Avatar
TAROMAN TAROMAN is offline
US Veteran
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 6,290
Likes: 8,789
Liked 7,778 Times in 2,375 Posts
Default

If you want anything more than the ubiquitous 125 grain plinking loads, it does.
__________________
-jwk-
US Army '72-'95
Reply With Quote
  #73  
Old 03-30-2018, 01:18 AM
BC38's Avatar
BC38 BC38 is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Nov 2013
Location: Spokane, WA
Posts: 13,474
Likes: 1,145
Liked 18,397 Times in 7,279 Posts
Default

I probably don't shoot more than 300-400 rounds a month average right now, but I still reload. 380, 9mm, 38 special, 357 magnum, 44 special, 44 magnum, 45acp, & 45 Colt.

I like being able to spend a day a the range shooting 300 or 400 rounds and knowing that the ammo only cost me $50-$60 instead of $150-$200.

I've got what I need to load almost 30k rounds but I'm still buying components when I find a good deal on them.

Eventually I'll be fully retired and I'll have more time to shoot and to reload. By the time I get there I want make sure I have enough components to be able to load and shoot to my heart's content for the rest of my days.

It's also really cool to be able to load things like 38 special +P power in a 357 magnum case. Makes shooting 357 snubbies a lot more fun.

Last edited by BC38; 03-30-2018 at 01:28 AM.
Reply With Quote
  #74  
Old 03-30-2018, 02:53 PM
jcelect jcelect is offline
US Veteran
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Mar 2000
Location: Monroeville, Ohio,USA
Posts: 2,968
Likes: 843
Liked 6,171 Times in 1,544 Posts
Default Cost?


Here is a picture of my reloading bench! Please do not ask "How much money is in that picture"! First of all, I don't know! Second, the cost was spread over 40 years of use/buying on that bench! In the back ground you will see die heads for the Dillon press for all the revolver calibers and a few auto calibers(shot in revolvers). I have the ability to produce ANY bullet/powder combination I want and also have produced bottle neck rounds for revolvers in 22 caliber by manufacturing the brass which can not be purchased in any store! A store bought round is nothing but brass to me. In the past, me and my wife shot in competition and we were shooting about 10,000 rounds a year in practice and competition. Reloading will become a PITA or a life long hobby for you!
jcelect
Reply With Quote
The Following User Likes This Post:
  #75  
Old 04-07-2018, 08:03 AM
kbm6893 kbm6893 is offline
SWCA Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,625
Likes: 636
Liked 6,861 Times in 2,541 Posts
Default

The cost of getting started was negated by the fact that nearly every piece of my equipment was a birthday, Christmas, or anniversary present. Gotta have something to open, might as well make it something that I’m still gonna have 20 years from now. I have a box full of outdated tablets and computer equipment in my garage. My reloading stuff will never go bad.
Reply With Quote
The Following User Likes This Post:
  #76  
Old 04-10-2018, 03:33 PM
RGVshooter RGVshooter is offline
Banned
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Jun 2016
Location: USA
Posts: 1,285
Likes: 1,112
Liked 1,609 Times in 660 Posts
Default

A buddy of mine handed me a box of 500 170gr Elmer Keith SWC's.....FREE!

I have plenty of supplies accumulated in my workshop, Primers, powder, free range brass. Loading up 500 rounds of these bad boys will probably cost me penny's per round.



How much would 500 rounds of 38 special at the store will cost ya? Don't forget, bullets don't grow on trees and you're going to always go back to the store to buy more. Investing in a press will pay off if you shop around for the best prices on reloading supplies and build up a friend base to share/trade with helps a lot as well.
Besides, with reloading you can load ammo that will best fit your needs/purpose much better and cheaper than any commercially available ammo over the counter.
Reply With Quote
  #77  
Old 04-10-2018, 03:49 PM
Gryff's Avatar
Gryff Gryff is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Aug 2005
Location: Bay Area, California
Posts: 272
Likes: 7
Liked 320 Times in 83 Posts
Default

If you only shoot 300-500 rounds a year, then the cost of getting into reloading is probably far more than you'll spend on factory ammo. You don't start really saving through reloading until you are willing to buy your components in bulk (4 or 8lbs of powder at a time, 1000 to 3000 bullets at a time, etc.). It makes a lot more financial sense if you shoot at least a case of ammo a year.

I reload .38 Special for competition using HP38 and Bayou bullets. Per round cost is $0.13, but the real benefit is that I get to design my loads to achieve the ballistics that I desire.
Reply With Quote
  #78  
Old 04-10-2018, 04:20 PM
BC38's Avatar
BC38 BC38 is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Nov 2013
Location: Spokane, WA
Posts: 13,474
Likes: 1,145
Liked 18,397 Times in 7,279 Posts
Default

Quote:
Originally Posted by RGVshooter View Post
A buddy of mine handed me a box of 500 170gr Elmer Keith SWC's.....FREE!
Hope you at least bought him a beer in return - that's a nice thing to give someone. A box of even the cheapest cast lead 357 pills is $40 or more (including things like shipping and/or tax).
Reply With Quote
  #79  
Old 04-10-2018, 07:36 PM
BE Mike's Avatar
BE Mike BE Mike is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Sep 2003
Location: Indiana
Posts: 3,575
Likes: 2,235
Liked 3,476 Times in 1,475 Posts
Default

Quote:
Originally Posted by kbm6893 View Post
The cost of getting started was negated by the fact that nearly every piece of my equipment was a birthday, Christmas, or anniversary present. Gotta have something to open, might as well make it something that I’m still gonna have 20 years from now. I have a box full of outdated tablets and computer equipment in my garage. My reloading stuff will never go bad.
Many people won't think twice about buying the latest iPhone for $950.00 that will be replaced next year, but won't spend the same money for a first class reloading setup.
Reply With Quote
  #80  
Old 04-10-2018, 08:54 PM
Al W. Al W. is offline
Member
Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me? Does loading .38 spl make sense for me?  
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
Default

Reloading saves once the investment has been made.
Its nice to know that you are in control and can produce what you need at a more reasonable cost.
Its also a kind of fun and if your inclined to taking pleasure in precision you may find that you enjoy the process.
Perhaps almost as much as the shooting it self.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Does this make sense. britbike1 The Lounge 6 08-28-2016 01:14 PM
doesn't make sense erreertt Smith & Wesson M&P 15-22 6 12-29-2013 11:26 PM
Does this make sense? tectrry Smith & Wesson M&P Pistols 15 07-07-2013 12:03 AM
Does this make sense? S&W Fan S&W Revolvers: 1980 to the Present 5 09-17-2012 08:16 PM
Does this aim make sense?? Mickstix Smith & Wesson Semi-Auto Pistols 7 08-17-2008 06:26 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 12:26 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)