Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2018, 09:10 PM
roscoepc roscoepc is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Jun 2014
Location: Marion, Va
Posts: 562
Likes: 561
Liked 626 Times in 243 Posts
Default 500 S&W Mag Powder Suggestions

Ok, I've pretty much settled on the size boolet, (350gr), and performance I'm looking for, (about 1200fps), to use in my 500. The only trouble is the only Bonafide, From the Manufacturer, load info I've found is using TiteGroup which, while it's a good powder that I have had no problems with, I have to be EXTREMELY tight with my loading procedures to avoid a double throw.

For the record, I'm STILL gonna be tight with my loading procedures, I'm just looking for a powder that'll fill the case more than TiteGroup!

And PLEASE... No post's about blowing up my gun using TiteGroup.. I've been there, Done that, and have been read the Riot Act about it!!

Ok, The Spec's are: 350gr boolet traveling at about 1200fps with verifiable manufacture's loading info.

Many Thanks for all responses!!!
Reply With Quote
  #2  
Old 04-10-2018, 09:32 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,559
Likes: 3,037
Liked 22,450 Times in 5,824 Posts
Default

Quote:
Originally Posted by roscoepc View Post
Ok, The Spec's are: 350gr boolet traveling at about 1200fps with verifiable manufacture's loading info.
This will be your problem. The 500 Smith and Wesson Magnum is a realativly new cartridge

I began hand-loading and shooting the 500 Smith and Wesson Magnum about 6 months before S&W began publicly shipping revolvers.

Those of us that have been shooting the 500 Smith and Wesson Magnum the longest had to work up loads from nothing. Much of what we shoot will not have verifiable Manufacturers data.
Reply With Quote
The Following 2 Users Like Post:
  #3  
Old 04-10-2018, 10:08 PM
iouri iouri is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
Default

You can guarantee to avoid double charge by using "slow" powders, H110, Enforcer, 2400 but those probably will put you over 1200. I've been using Enforcer lately and had to bump charge almost to powder manufacturers max otherwise it was real messy but bullet is almost sitting on the powder so there's no way case can be double charged. It produces about 1340 fps out of my 7.5" (in the manual they state about 1900 !). I've also tried 4227 - also good case fill and even less fps. So you can try 4227 or it's Hodgdon analog. Recipes available at hodgdonreloading.com. Good luck.
Reply With Quote
The Following User Likes This Post:
  #4  
Old 04-10-2018, 10:39 PM
roscoepc roscoepc is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Jun 2014
Location: Marion, Va
Posts: 562
Likes: 561
Liked 626 Times in 243 Posts
Default

Thank's Guy's!!

iouri, a quick search for the Enforcer powder turned up some info on the ACCURATE 5744 powder that seems to fit my needs to a T!!: ACCURATE 5744: 350 HDY XTP 32.8 1,264fps.

The thing is they list a minimum charge of 32.8gr with no maximum?? Does the 32.8gr fill the case that full??
Reply With Quote
  #5  
Old 04-10-2018, 10:53 PM
iouri iouri is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
Default

Yes, A5744 often mentioned to be same as Enforcer. You can check manufacturer's manual. I've checked and their recipes have both min and max charge. Their min is way higher than you've posted and very close to Enforcer. I'm pretty sure that even min charge you posted won't allow double charge.
Reply With Quote
  #6  
Old 04-11-2018, 02:20 AM
moralem moralem is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2009
Posts: 2,451
Likes: 240
Liked 6,183 Times in 1,570 Posts
Default

For those of us that don’t load what commercial brands and specs should I look to try in my new 500?
Reply With Quote
  #7  
Old 04-11-2018, 09:19 AM
ruggyh's Avatar
ruggyh ruggyh is offline
SWCA Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2012
Location: North Texas
Posts: 1,350
Likes: 181
Liked 1,654 Times in 639 Posts
Default

Quote:
Originally Posted by roscoepc View Post
Thank's Guy's!!

iouri, a quick search for the Enforcer powder turned up some info on the ACCURATE 5744 powder that seems to fit my needs to a T!!: ACCURATE 5744: 350 HDY XTP 32.8 1,264fps.

The thing is they list a minimum charge of 32.8gr with no maximum?? Does the 32.8gr fill the case that full??
The 100% case fill for 5744 with 350 XTP MAG is about 44 grains. That said 100% case fill of 5744 on produces about 52-54kpsi in 500 S&W per my testing- velocity was around 1760 fps. No issue with a case full in 500.

Get powder chose for what you want along with Trailboss and Tin Star.

A 100% fill of Trailboss will send an 350 XTP MAG about 1000 fps.

A 100% fill of Vhit N32C or Tin Star will do about 1250 fps

1680 is also suitable for reduced loads in 500 but unfortunately I cant find my notes right now to provide any additional insight.

Quote:
A5744 often mentioned to be same as Enforcer.
These are very different powder and data should not be exchanged - 44 grains of Enforcer is about 90% case fill and would produce about 65Kpsi and a full case of it, about 48 grains would produce a peak pressure of about 80Kpsi. (I have not personally pressure tested this powder in 500 S&W)


John Ross put out a paper on loads for 500S&W and powders suitable for downloading. Anyone wanting a copy can PM me with personal email address and will send you the PDF

A number of rifle powders- powders generally considered to slow for handgun cartridges that work fine for reduced loads in the 500. My personal favorite among them is 3031.

be safe
Ruggy
Reply With Quote
  #8  
Old 04-11-2018, 09:51 AM
CH4's Avatar
CH4 CH4 is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Jul 2014
Location: Mojave Desert
Posts: 10,248
Likes: 17,882
Liked 23,919 Times in 6,782 Posts
Default

Trailboss! It’ll get you 1200 FPS with a 350 grain bullet and it’s IMPOSSIBLE to double charge.
Reply With Quote
  #9  
Old 04-11-2018, 11:37 AM
iouri iouri is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
Default

Quote:
Originally Posted by ruggyh View Post

These are very different powder and data should not be exchanged - 44 grains of Enforcer is about 90% case fill and would produce about 65Kpsi and a full case of it, about 48 grains would produce a peak pressure of about 80Kpsi. (I have not personally pressure tested this powder in 500 S&W)





be safe

Ruggy

I’m looking at powder manufacturers data and according to them max charge for this bullet weight is 45-46.5 depending on the bullet, producing 54-55k psi



Sent from my iPhone using Tapatalk
Reply With Quote
  #10  
Old 04-11-2018, 12:03 PM
ruggyh's Avatar
ruggyh ruggyh is offline
SWCA Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2012
Location: North Texas
Posts: 1,350
Likes: 181
Liked 1,654 Times in 639 Posts
Default

Quote:
Originally Posted by iouri View Post
I’m looking at powder manufacturers data and according to them max charge for this bullet weight is 45-46.5 depending on the bullet, producing 54-55k psi
Sent from my iPhone using Tapatalk
Check each powder technical data sheets

There are numerous powders that will have similar behavior in a specific cartridge and still are very different.

Here are few of the detailed specifics of the these two powders.

Enforcer
Density 1.580
Heat of Explosion/potential 4005 kj/kg
progressive burn limit .315
Specific heat 1.2310

5447
Density 1.570
Heat of Explosion/potential 4713 kj/kg
progressive burn limit .119
Specific heat 1.2110


be safe
Ruggy
Reply With Quote
  #11  
Old 04-11-2018, 12:04 PM
SuperMan SuperMan is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Apr 2003
Location: Rochester, NH USA
Posts: 3,999
Likes: 1,620
Liked 4,900 Times in 1,701 Posts
Default

I have a 4" 500 and have settled on 350 grain bullets also...

18.0 is about 1050 fps

20.0 is about 1250 fps...

If you double charge with 18 grains it fills the case almost to the top...hard not to notice that...

Bob
Reply With Quote
  #12  
Old 04-11-2018, 12:18 PM
ruggyh's Avatar
ruggyh ruggyh is offline
SWCA Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2012
Location: North Texas
Posts: 1,350
Likes: 181
Liked 1,654 Times in 639 Posts
Default

I don't want to move the thread in side ways direction but will make a few addition comments here on loading large cross sectional cases.

While true double charge are a problem these are and should be be readily visible and apparent to the hand loader. The problem is that with dense fast powder the pressure rise very fast with just small change even in these large volume case (some refer to this as being spikey).

In the 500 S&W case you cannot see a 1 grain difference in the charge of a powder like Tite group.

The point here is don't need a double charge of fast power to cause a problem a feww grains will get you there and even the sharpest eyes won't detect the problem.

apologizes to Roscoepc for getting a little of topic in his thread

be safe and choose your powder wisely
Ruggy

Last edited by ruggyh; 04-11-2018 at 12:20 PM.
Reply With Quote
  #13  
Old 04-11-2018, 12:21 PM
iouri iouri is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
Default

Quote:
Originally Posted by ruggyh View Post
Check each powder technical data sheets

There are numerous powders that will have similar behavior in a specific cartridge and still are very different.

Here are few of the detailed specifics of the these two powders.

Enforcer
Density 1.580
Heat of Explosion/potential 4005 kj/kg
progressive burn limit .315
Specific heat 1.2310

5447
Density 1.570
Heat of Explosion/potential 4713 kj/kg
progressive burn limit .119
Specific heat 1.2110


be safe
Ruggy


Thanks, Ruggy, I wasn’t arguing about differences between enforcer and 5447, just pointed out that for enforcer powder manufacturer shows lower pressures (around 55k for max load)


Sent from my iPhone using Tapatalk
Reply With Quote
  #14  
Old 04-11-2018, 02:26 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions 500 S&W Mag Powder Suggestions  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 30,906
Likes: 41,494
Liked 29,147 Times in 13,778 Posts
Default Minimum load of Power Pistol...

In the Speer #14 book a minimum charge of Power Pistol gets about 1250 fps.

23.0 gr of PP with a 350 gr jacketed.

I don't have the data but I would think anything slower down to about Unique would be able to do the job. Acc 7??
__________________
"He was kinda funny lookin'"

Last edited by rwsmith; 04-11-2018 at 02:45 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Powder suggestions for 38 special Al W. Reloading 60 10-23-2017 08:28 AM
Does This Gun Use Black Powder Or Smokeless Powder? Dating H&R .32 Cal. Vest Pocket MackHR Firearms & Knives: Other Brands & General Gun Topics 2 07-08-2016 11:15 AM
First .40 S&W Loads, powder suggestions 15Krounds Reloading 19 04-23-2015 07:19 PM
Needing 45acp/Bullseye powder suggestions.... pdblue Reloading 11 08-07-2013 08:08 PM
Need powder suggestions imakmst Reloading 19 07-09-2013 12:21 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:57 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)