Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 05-12-2018, 06:56 PM
crankyoldlady's Avatar
crankyoldlady crankyoldlady is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2009
Location: Puget Sound
Posts: 616
Likes: 578
Liked 802 Times in 287 Posts
Default cob medium question

Got a new tumbler. Came with cob medium. I've never used anything but walnut.

First test batch I notice about 30% of the cases have a tiny piece of cob in the flash hole. Never had that happen before.

They are easy to remove. A light poke with a toothpick does it.

I'm thinking about just leaving them there and prime away. Surely the primer will blast right through.

Go ahead, tell me my pistol with blow up taking my arm and head with it.
Reply With Quote
  #2  
Old 05-12-2018, 07:09 PM
snakeye's Avatar
snakeye snakeye is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Apr 2013
Location: Texas
Posts: 238
Likes: 43
Liked 86 Times in 51 Posts
Default

No you don't want to do that....if you have never had issues with walnut the just use that.
Reply With Quote
  #3  
Old 05-12-2018, 07:21 PM
ACORN's Avatar
ACORN ACORN is online now
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jan 2004
Location: North Huntingdon Pa.
Posts: 4,500
Likes: 7,614
Liked 9,927 Times in 2,933 Posts
Default

I would think clogged flash holes would lead to inconsistent ignition.
Why not just poke the hole?
__________________
I told you not to use Lifebuoy
Reply With Quote
  #4  
Old 05-12-2018, 07:33 PM
crankyoldlady's Avatar
crankyoldlady crankyoldlady is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2009
Location: Puget Sound
Posts: 616
Likes: 578
Liked 802 Times in 287 Posts
Default

Quote:
Originally Posted by ACORN View Post
I would think clogged flash holes would lead to inconsistent ignition.
Why not just poke the hole?
Its not as if they are clogged solid. It'll be a little piece with some daylight. Some times a light tap on the bench does it.

I guess I'm lazy. Sorting, searching, and poking is so tedious.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 05-12-2018, 07:49 PM
rockquarry rockquarry is offline
Member
 
Join Date: Aug 2005
Posts: 7,553
Likes: 4
Liked 8,885 Times in 4,121 Posts
Default

I've found some that were tightly lodged. A primer might blow them out and might not. Easier to do it the right way. You won't get much mileage out of a toothpick. Something sharp and pointed like an ice pick or dental tool works a lot better.
Reply With Quote
  #6  
Old 05-12-2018, 07:50 PM
mike campbell mike campbell is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Dec 2014
Posts: 531
Likes: 90
Liked 1,518 Times in 365 Posts
Default

Sounds like you're de-priming before you polish? If so, why would you run dirty cases thru your dies? The first thing I do when cases come back from the range is tumble them. If there's something in the flash hole after that, it will go out with the primer.
__________________
Carry.."hope" isn't a strategy
Reply With Quote
  #7  
Old 05-12-2018, 07:58 PM
dr. mordo's Avatar
dr. mordo dr. mordo is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2017
Location: Miami, FL
Posts: 1,677
Likes: 5,138
Liked 2,954 Times in 1,021 Posts
Default

I use cob, and don't de-prime first. Works great.
Reply With Quote
The Following User Likes This Post:
  #8  
Old 05-12-2018, 08:03 PM
arjay's Avatar
arjay arjay is online now
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Mar 2006
Location: Colorado
Posts: 15,082
Likes: 91,553
Liked 26,245 Times in 8,376 Posts
Default

I switched to pet bedding from Pet Smart.Cleans well and no clogged holes
Reply With Quote
The Following 3 Users Like Post:
  #9  
Old 05-12-2018, 08:16 PM
bigggbbruce's Avatar
bigggbbruce bigggbbruce is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Apr 2011
Location: Where this month?
Posts: 3,604
Likes: 264
Liked 4,215 Times in 1,714 Posts
Default

Quote:
Originally Posted by crankyoldlady View Post

I guess I'm lazy. Sorting, searching, and poking is so tedious.
Toss the brass back in after you've removed the cob.. a few seconds should loosen up most of them..
Reply With Quote
The Following 2 Users Like Post:
  #10  
Old 05-12-2018, 08:44 PM
Collo Rosso's Avatar
Collo Rosso Collo Rosso is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jan 2014
Location: Upstate South Carolina
Posts: 1,523
Likes: 1,267
Liked 2,021 Times in 760 Posts
Default

Quote:
Originally Posted by arjay View Post
I switched to pet bedding from Pet Smart.Cleans well and no clogged holes
There's a bunch of materials they use for pet bedding. I look for the reptile bedding that's crushed walnut. I also de-prime after tumbling.
Reply With Quote
The Following 2 Users Like Post:
  #11  
Old 05-12-2018, 08:59 PM
daniel lawecki's Avatar
daniel lawecki daniel lawecki is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Nov 2012
Location: toledo ohio
Posts: 657
Likes: 734
Liked 770 Times in 330 Posts
Default

First off you'll have FTF and I use a course corn media. I also tumble with old primers still in. You don't want to have poor burn and a stuck bullet in barrel.

Last edited by daniel lawecki; 05-18-2018 at 04:11 PM.
Reply With Quote
The Following User Likes This Post:
  #12  
Old 05-12-2018, 09:00 PM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,394
Liked 8,051 Times in 3,652 Posts
Default

Tumble the brass unsized, with the fired primers in place. Next step is to size the and deprime the clean cases. Clean cases are easier to size and the depriming will take care of any pesky hole cloggers.
After many years of trying stuff that's not made for case polishing I can tell you the treated shell media sold by Midway USA is the best value.
Pet bedding materials are usually not the correct size. The treated shell polishes and lasts a long time. Corn cobb is softer and doesn't polish like the treated nut shell.
You can get the nutshell lizard stuff but it's not treated....now you have to buy additives and the proper additives ( Rooster Labs polishing additives) is expensive...it eats up your savings...just get the stuff from Midway USA...much better deal than DIY with lizard litter.
Gary
Reply With Quote
The Following 3 Users Like Post:
  #13  
Old 05-12-2018, 09:22 PM
Mike, SC Hunter Mike, SC Hunter is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,838
Likes: 13,934
Liked 13,639 Times in 4,938 Posts
Default

Lizard litter with a cap full of Nu-Shine car polish works as good as anything. As far as a clogged flash hole. It's a non issue. The primer will blow it out. Been polishing and loading rifle cases like this for years.
__________________
S&W Accumulator
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 05-12-2018, 10:23 PM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

No big deal.

What is an extra Squib or two?
Reply With Quote
The Following 3 Users Like Post:
  #15  
Old 05-12-2018, 10:45 PM
SMSgt's Avatar
SMSgt SMSgt is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2010
Location: Florida
Posts: 6,556
Likes: 3,344
Liked 9,154 Times in 3,433 Posts
Default

Any primer that doesn't blow a piece of corn cob media out of a flash hole is a dud.
Reply With Quote
The Following 2 Users Like Post:
  #16  
Old 05-13-2018, 03:34 AM
crankyoldlady's Avatar
crankyoldlady crankyoldlady is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2009
Location: Puget Sound
Posts: 616
Likes: 578
Liked 802 Times in 287 Posts
Default

Quote:
Originally Posted by mike campbell View Post
Sounds like you're de-priming before you polish? If so, why would you run dirty cases thru your dies?
I'm not sure why it sounds to you like that's what I'm doing but since you asked...

Dirty brass is washed when I get home from the range. Next, I sort by caliber and deprime on a dedicated press using a universal depriming die. Then I tumble. I like to start with clean polished brass when I am ready to resize and flare.

I'm not new to handloading.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 05-13-2018, 06:30 AM
Andy Lowry Andy Lowry is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Sep 2017
Location: Prescott AZ
Posts: 478
Likes: 164
Liked 1,137 Times in 288 Posts
Default

What you describe is why I switched to walnut. Corncob seems to work faster, but I'm too lazy for that extra step of checking the pockets. It's not quite as bad as having somebody next to you at the range shooting !%$## small primer .45, but it's close.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 05-13-2018, 06:53 AM
DumpStick DumpStick is offline
US Veteran
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Nov 2016
Location: Oklahoma, on a dirt road.
Posts: 389
Likes: 214
Liked 606 Times in 220 Posts
Default

I also deprime, using a universal deprime die, prior to washing and tumbling.

And, I also got tired of having to poke the cob media from the primer holes.

Which is why I switched to ground walnut shells. With a dab of Nu-Finish, and a tiny splash of mineral spirits, it does everything I need done, and doesn't clog the flash-hole.
Reply With Quote
The Following 2 Users Like Post:
  #19  
Old 05-13-2018, 07:48 AM
stansdds stansdds is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Apr 2007
Location: Virginia
Posts: 8,713
Likes: 19,282
Liked 11,740 Times in 5,352 Posts
Default

You definitely do not want to leave anything in the primer pocket, flash hole or inside the case!

I have always used crushed corn cob media and I learned that it is best to clean the cases first, then run them through the resizer/depriming die.

That corn cob is not going to clean fouling from the primer pockets, so if that is your goal, then I suggest manually cleaning the pockets with a primer pocket brush.
Reply With Quote
The Following User Likes This Post:
  #20  
Old 05-13-2018, 12:05 PM
SMSgt's Avatar
SMSgt SMSgt is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2010
Location: Florida
Posts: 6,556
Likes: 3,344
Liked 9,154 Times in 3,433 Posts
Default

Quote:
Originally Posted by DumpStick View Post
I also deprime, using a universal deprime die, prior to washing and tumbling.

And, I also got tired of having to poke the cob media from the primer holes.

Which is why I switched to ground walnut shells. With a dab of Nu-Finish, and a tiny splash of mineral spirits, it does everything I need done, and doesn't clog the flash-hole.
Curious here. What is the purpose of the mineral spirits? It seems as if it would counteract the polishing/lubing effect of the Nu-Finish. Like mixing solvents and lubricants.
Reply With Quote
The Following User Likes This Post:
  #21  
Old 05-13-2018, 12:41 PM
muddocktor's Avatar
muddocktor muddocktor is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Oct 2014
Location: South Louisiana
Posts: 5,346
Likes: 11,606
Liked 9,018 Times in 3,192 Posts
Default

Quote:
Originally Posted by SMSgt View Post
Curious here. What is the purpose of the mineral spirits? It seems as if it would counteract the polishing/lubing effect of the Nu-Finish. Like mixing solvents and lubricants.
I would imagine it is to thin the wax so that it is distributed over the media better and will evaporate in short order, leaving the media thinly coated with the wax.

With that said, I've been using the Lyman Green media for 25-30 years at least as it does a nice job of cleaning and polishing the brass and lasts a long time also. It's a corn cob media and it will get in the flash holes, but I clean my cases before I resize and deprime them when I am not wet tumbling.
Reply With Quote
  #22  
Old 05-13-2018, 12:51 PM
crankyoldlady's Avatar
crankyoldlady crankyoldlady is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2009
Location: Puget Sound
Posts: 616
Likes: 578
Liked 802 Times in 287 Posts
Default

Maybe all I need to do is put the depriming pins (I removed them) back in my sizing dies. The pin would knock out any thing in the primer pocket.
Reply With Quote
The Following 2 Users Like Post:
  #23  
Old 05-13-2018, 12:52 PM
mike campbell mike campbell is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Dec 2014
Posts: 531
Likes: 90
Liked 1,518 Times in 365 Posts
Default

Quote:
Originally Posted by gwpercle View Post
Tumble the brass unsized, with the fired primers in place. Next step is to size the and deprime the clean cases. Clean cases are easier to size and the depriming will take care of any pesky hole cloggers.
After many years of trying stuff that's not made for case polishing I can tell you the treated shell media sold by Midway USA is the best value.
Pet bedding materials are usually not the correct size. The treated shell polishes and lasts a long time. Corn cobb is softer and doesn't polish like the treated nut shell.
You can get the nutshell lizard stuff but it's not treated....now you have to buy additives and the proper additives ( Rooster Labs polishing additives) is expensive...it eats up your savings...just get the stuff from Midway USA...much better deal than DIY with lizard litter.
Gary
I'm on board with all this, except ....

I've always used the "red" treated walnut, such as Lyman sells. It's red because it's treated with red rouge. I buy red rouge powder for a buck or two an ounce and re-treat the media 2-3 times before tossing it. I also bought some cerium oxide powder( about $10 for 8 ounces) which is used to polish glass....windshields and headlights for instance.

The expense for those compounds is pretty nominal...maybe 50 cents to treat a batch of media that will polish several thousand cases.

Since I'm buying the polishing powders to get the most out of my media, I decided to try some lizard bedding walnut. The combo of walnut and powder additive is pretty much a wash with buying treated media. Both types of walnut do a fine job of polishing with different handling characteristics. I'll use both until I run out and since I'll probably run out of walnut before additives, I'll likely stay with the lizard bedding.

In 50 years of handloading I've never "washed" brass. Guess I'd rather fish than cut bait.
__________________
Carry.."hope" isn't a strategy
Reply With Quote
The Following User Likes This Post:
  #24  
Old 05-13-2018, 01:03 PM
crankyoldlady's Avatar
crankyoldlady crankyoldlady is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jul 2009
Location: Puget Sound
Posts: 616
Likes: 578
Liked 802 Times in 287 Posts
Default

Most of my shooting is in an indoor range. Brass is swept up rather than picked up which increases lead dust. For me, washing dirty range brass minimizes contaminants and keeps my medium cleaner longer.
Reply With Quote
The Following User Likes This Post:
  #25  
Old 05-13-2018, 02:32 PM
DumpStick DumpStick is offline
US Veteran
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Nov 2016
Location: Oklahoma, on a dirt road.
Posts: 389
Likes: 214
Liked 606 Times in 220 Posts
Default

Quote:
Originally Posted by SMSgt View Post
Curious here. What is the purpose of the mineral spirits? It seems as if it would counteract the polishing/lubing effect of the Nu-Finish. Like mixing solvents and lubricants.
The mineral spirits thin the NuFinish, and help keep the dust down. About a teaspoon is all it takes.
The NuFinish just seems to work better that way.
Reply With Quote
  #26  
Old 05-13-2018, 03:01 PM
Twoboxer's Avatar
Twoboxer Twoboxer is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Mar 2012
Location: Eastern Pennsylvania
Posts: 1,033
Likes: 340
Liked 736 Times in 398 Posts
Default

I used crushed walnut pet bedding plus dryer sheets for dust plus the occasional additve for a few years. Then someone I respected told me that corn cob COULD polish/clean better. It also COULD have almost no dust, last longer, require no additives that add cost and can gook up the works . . . all while leaving nothing stuck in the primer pockets or anywhere else in the brass.

The specific product required is small ground corn cob blast media, 425-1000 micron range . . . like this product: Corn Cob Abrasive Nlasting Media .

You still need some process to separate the media from the brass (I use a rotary separator for about a minute), but the keys are the dust has been lost in the sieving process and the particles are too small to stick anywhere.

Other stuff can certainly be used, but the ones I've used each require some other product(s) to offset the disadvantages.
Reply With Quote
  #27  
Old 05-14-2018, 05:27 PM
BigBill BigBill is offline
Absent Comrade
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,353 Times in 5,549 Posts
Default

I decap first, then run the dirty cases in the cob media. I resize and clean the primer pocket. Next it goes in the walnut media with some brass polish for its final cleaning. My ammo looks like new.
Reply With Quote
  #28  
Old 05-17-2018, 08:43 PM
Old&Retired's Avatar
Old&Retired Old&Retired is offline
US Veteran
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Apr 2018
Location: Cecil County, MD
Posts: 298
Likes: 210
Liked 237 Times in 120 Posts
Default

Personally, I clear all the clogged primer holes before priming. That said you may find this link an interesting read.
Box Of Truth actually did an accuracy check with both clear and clogged primer holes w/ a .223. Very interesting results.
Educational Zone #152 - Does Polishing Media in Flash Holes Affect Accuracy? - The Box O' Truth
Reply With Quote
  #29  
Old 05-18-2018, 06:50 AM
stansdds stansdds is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Apr 2007
Location: Virginia
Posts: 8,713
Likes: 19,282
Liked 11,740 Times in 5,352 Posts
Default

Quote:
Originally Posted by Old&Retired View Post
Personally, I clear all the clogged primer holes before priming. That said you may find this link an interesting read.
Box Of Truth actually did an accuracy check with both clear and clogged primer holes w/ a .223. Very interesting results.
Educational Zone #152 - Does Polishing Media in Flash Holes Affect Accuracy? - The Box O' Truth
That's weird. I would have thought a clogged flash hole would have caused inconsistent ignition of the powder, but based on group sizes... it has the opposite effect? I wish he had also made a chronograph comparison between the two.
Reply With Quote
The Following User Likes This Post:
  #30  
Old 06-04-2018, 07:01 PM
Mike, SC Hunter Mike, SC Hunter is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,838
Likes: 13,934
Liked 13,639 Times in 4,938 Posts
Default

It's what you learn after you know it all that counts.
__________________
S&W Accumulator
Reply With Quote
  #31  
Old 06-04-2018, 07:11 PM
rockquarry rockquarry is offline
Member
 
Join Date: Aug 2005
Posts: 7,553
Likes: 4
Liked 8,885 Times in 4,121 Posts
Default

I'm not sure that a primer will blow out a piece of tightly lodged cleaning media. Maybe, but unless someone knows this positively, I would assume it won't work with near 100% reliability. It's really pretty easy to dislodge cleaning media from a flashhole.
Reply With Quote
  #32  
Old 06-05-2018, 09:05 AM
Al W. Al W. is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
Default

A "me too" post.
Why de prime and then clean.
Clean then de prime.
You might see a flake or two of cob inside the case per 500 , but nothing like a problem.
I would not think that priming with a piece of cob in the priming hole would be advisable . That ignition hole is pretty small .
Reply With Quote
The Following User Likes This Post:
  #33  
Old 06-05-2018, 09:37 AM
Hasbeen1945 Hasbeen1945 is offline
Absent Comrade
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Mar 2015
Location: Deer Park Texas
Posts: 450
Likes: 410
Liked 596 Times in 212 Posts
Default

I’ve killed one tumbler. My Lyman sound like I was cleaning rocks. Bought a new one. Then two of my friends bought SS rotary case cleaners. One a Lyman the other Frankfort arsenal.
So I waited and bought big green.
I use a lee decap die, then save up enough brass to make it worth while.
R
Reply With Quote
  #34  
Old 06-05-2018, 04:33 PM
hdwhit hdwhit is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Sep 2016
Location: North Texas
Posts: 804
Likes: 86
Liked 482 Times in 300 Posts
Default

The active ingredient in most primers is lead styphnate. It is a high explosive with a wavefront velocity on the order of 16,000 feet per second.

A small piece of media stuck in the flash hole will not stop the explosion from reaching the powder and unless you're part of the "five shots-one hole at 1,000 yards" crowd, it will not have a noticeable effect on the performance of the ammunition.

If you need to prove this to yourself, prime a case with a clear flash hole and one with an obstructed flash hole. No powder, no bullet, just a primed case. Darken the room. Manually load and fire each one. Compare the resulting light show coming out of the muzzle and see how much of an obstruction a piece of corn cob really isn't.

All of that said, when I tumble brass, I always inspect the cases afterward and use a toothpick to knock out any media in the flash hole. This is not because I think the media might cause a misfire, but because it seems to me to be leaving the job incomplete to not knock it out.

Last edited by hdwhit; 06-05-2018 at 04:35 PM. Reason: finish last sentence
Reply With Quote
  #35  
Old 06-05-2018, 07:48 PM
Greenjoytj Greenjoytj is offline
Member
cob medium question cob medium question cob medium question cob medium question cob medium question  
Join Date: Feb 2016
Location: Durham Region,Ontario,Can
Posts: 92
Likes: 36
Liked 37 Times in 23 Posts
Default

I use one of the LEE brand de-caping rods, the ones designed for manually hand de-caping cases by setting them in a small steel base.
The rods come in two sizes 22 cal and 30 cal.
I just use the rod, no base and push the pin into the primer pocket knocking the corn cob blockage out the case mouth.

I started unplugging the flash hole with a long pin but the pin was too thin and would sometimes pass by the blockage rather than push it out, so I found that the pin on the LEE de-caping rod did the job.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: MEDIUM M&P9 grip insert CTPete WANTED to Buy 0 04-14-2016 10:10 PM
SS tumbler medium Cpo1944 Reloading 6 05-01-2014 04:48 PM
22,270,06 medium loads fps Nevada Ed Reloading 3 08-06-2013 07:20 PM
New medium blackstrap came with my M&P .40... More texture! Englishsteel Smith & Wesson M&P Pistols 11 04-27-2013 06:11 AM
medium 45 ruru Smith & Wesson Semi-Auto Pistols 7 09-26-2008 07:29 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 04:22 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)