|
|
08-15-2018, 09:04 PM
|
Member
|
|
|
Join Date: Oct 2003
Location: Alabama
Posts: 561
Likes: 111
Liked 527 Times in 249 Posts
|
|
158 grain 357 commercial cast bullets
Anybody have any suggestion for some accurate loads with the standard coated commercial cast 158 grain bevel base bullets that most of the bullet makers sell? I cast my own flat base and gas check 357 bullets and have no problems getting those to shoot 1.5 inch 6 shot groups at 25 yards but for the life of me I cannot find a good load with that bevel base bullet in 357 or 38 special for that matter. I run out of time to cast with my work and find myself buying those bullets. I tried some midrange loads with #5 and power pistol this afternoon but got patterns at 25 yards with a 27-2 and a 686. I am looking for 2 inches or less at 25 yard. Anybody done that with that bullet? Interestly, I got great accuracy in my 57 41 mag with a coated bevel base bullet with unique. Thanks
Dogdoc
Sent from my iPad using Tapatalk
|
08-15-2018, 10:21 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
If the bullets are a good fit for your revo, load some over Unique. If they wont shoot, someting isnt right. Most commercial cast are far too hard for light to midrange loads. I think flat base have a slight accuracy edge but it is slight,
__________________
NRA Cert. Inst. IDPA CSO
|
08-16-2018, 03:52 AM
|
|
Moderator SWCA Member Absent Comrade
|
|
|
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
|
|
I get good accuracy with 4.0gr W231 under a 158gr LSWC bullet using a CCI-500 primer. These are shot in several revolvers including a 4" M686, 4" M10, 2" M36 and a few others. The M10 just loves this load!
The bullets are ~12 BHN.
__________________
Freedom is never free!!
SWCA #3437
|
The Following User Likes This Post:
|
|
08-16-2018, 07:29 AM
|
Member
|
|
|
Join Date: Oct 2003
Location: Alabama
Posts: 561
Likes: 111
Liked 527 Times in 249 Posts
|
|
Quote:
Originally Posted by fredj338
If the bullets are a good fit for your revo, load some over Unique. If they wont shoot, someting isnt right. Most commercial cast are far too hard for light to midrange loads. I think flat base have a slight accuracy edge but it is slight,
|
I think you are correct. Unique just seems to produce accurate loads across the spectrum in spite of its less than stellar metering. Same with 2400.
Sent from my iPad using Tapatalk
|
The Following 2 Users Like Post:
|
|
08-16-2018, 07:30 AM
|
Member
|
|
|
Join Date: Oct 2003
Location: Alabama
Posts: 561
Likes: 111
Liked 527 Times in 249 Posts
|
|
Quote:
Originally Posted by ArchAngelCD
I get good accuracy with 4.0gr W231 under a 158gr LSWC bullet using a CCI-500 primer. These are shot in several revolvers including a 4" M686, 4" M10, 2" M36 and a few others. The M10 just loves this load!
The bullets are ~12 BHN.
|
Is that in 38 special brass?
Sent from my iPad using Tapatalk
|
08-16-2018, 09:33 AM
|
Member
|
|
|
Join Date: Jun 2016
Location: for now ,Texas
Posts: 2,741
Likes: 186
Liked 3,300 Times in 1,525 Posts
|
|
For years I shot 5.0 grs of Unique using a commercial cast 158 gr bullet loaded in 38spl brass , usually bevel base with complete satisfaction . Give it a try , I think it will give you what you are looking for . If it don't , there's a problem with your gun , cylinder throats too tight , barrel to frame junction has a tight spot etc . Good Luck , Paul
|
08-16-2018, 11:18 AM
|
|
US Veteran
|
|
|
Join Date: Nov 2008
Location: Colorado
Posts: 7,520
Likes: 19,278
Liked 32,372 Times in 5,476 Posts
|
|
Ditto on the 5.0 grains Unique, standard primer, 158SWC, .38 Special case. Excellent performer in every revolver I've used over the past 46 years of reloading.
For .357 magnum case (and revolver) I like 6.5 grains Unique. Accurate and controllable.
|
08-16-2018, 11:21 AM
|
Member
|
|
|
Join Date: Oct 2003
Location: Alabama
Posts: 561
Likes: 111
Liked 527 Times in 249 Posts
|
|
Quote:
Originally Posted by LoboGunLeather
Ditto on the 5.0 grains Unique, standard primer, 158SWC, .38 Special case. Excellent performer in every revolver I've used over the past 46 years of reloading.
For .357 magnum case (and revolver) I like 6.5 grains Unique. Accurate and controllable.
|
Will load some tonight with unique and group this weekend
|
08-16-2018, 12:04 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,408
Likes: 3,190
Liked 12,772 Times in 5,691 Posts
|
|
I have used several brands of 158 gr lwc style factory bullets over
the years in my M19 and 686, both with a 6" tube.
I did not have any trouble getting them to group and with may powders, even with the bevel base and blue lube band, out of the long 357 case.
Bullsey at 918fps
Red Dot with a max load..... no chrony back then.
Trail Boss at 788fps
Green Dot at 1281fps
CFE at 1173fps
Unique at 1133 & 1320fps
HS6 at 1108fps
SR4756 at 1151fps
IMR4227 at 976fps.
You just need to find out at what fps a powder runs, for your revolver
to like it's speed for an accurate loading.
My 686 did not do well with w231, Universal, 800x or Blue Dot.
Don't give up, just go shoot MORE !!
|
08-17-2018, 01:14 AM
|
|
Member
|
|
|
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,484
Likes: 5,882
Liked 9,332 Times in 3,497 Posts
|
|
I tried Acme's 158gr L-SWC-NLG-HT (no lube groove, Hi-Tek coated), with a BHN:16. The base wasn't beveled, but it wasn't totally square, slightly rounded IIRC.
They shot good in my M686 & M327TRR8, both 5" bbls. using:
Unique @ 6.6 & 7.0grs
CFE-P @ 6.3 & 6.5grs.
Green Dot @ 6.3grs
all in 357 cases with CCI-500 primers & 1.615" COAL
Your results may be different.
.
.
.
Nice wooden boxes too.
.
.
__________________
Waiting for the break of day
|
The Following 2 Users Like Post:
|
|
08-17-2018, 08:08 AM
|
Member
|
|
|
Join Date: Oct 2003
Location: Alabama
Posts: 561
Likes: 111
Liked 527 Times in 249 Posts
|
|
Thanks
I will try some of these this weekend
Sent from my iPad using Tapatalk
|
08-18-2018, 01:36 AM
|
|
Moderator SWCA Member Absent Comrade
|
|
|
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
|
|
Quote:
Originally Posted by dogdoc
Is that in 38 special brass?
Sent from my iPad using Tapatalk
|
I'm sorry, yes, .38 Special brass.
__________________
Freedom is never free!!
SWCA #3437
|
08-18-2018, 02:27 AM
|
|
Member
|
|
|
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 31,000
Likes: 41,665
Liked 29,250 Times in 13,830 Posts
|
|
Heavy, soft bullet...
Quote:
Originally Posted by ArchAngelCD
I get good accuracy with 4.0gr W231 under a 158gr LSWC bullet using a CCI-500 primer. These are shot in several revolvers including a 4" M686, 4" M10, 2" M36 and a few others. The M10 just loves this load!
The bullets are ~12 BHN.
|
A heavy, soft bullet seems to be the place to start for target loads. And a light charge of powder worked up to the magic load.
__________________
"He was kinda funny lookin'"
|
|
Posting Rules
|
|
|
|
|