|
|
|
08-31-2018, 12:08 PM
|
Member
|
|
|
Join Date: Nov 2010
Location: WINCHESTER, VIRGINIA
Posts: 3,356
Likes: 4,437
Liked 4,433 Times in 1,463 Posts
|
|
PRESSES
I find myself considering a progressive press for 38spl ONLY. Tried a Lee many years ago and experience was less than stellar. I know improvements have been made over the last 35 years but was wondering about a Dillon?? Back in the day you had to buy THEIR dies, which was a turn off for me. Would such a press in todays world come complete self contained and ready to use??? Anyone have experience of late with their presses. I do not need a lot of drama with this thing, just want to use it for range fodder. THANKS for any input.
|
The Following User Likes This Post:
|
|
08-31-2018, 12:28 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2007
Location: Congress, AZ
Posts: 1,193
Likes: 2,343
Liked 1,260 Times in 541 Posts
|
|
38 spl only
My experience with Lee is once set up and running,[no need to change primer size ect.] they ran fine. BUT, I bought a 550 and never looked back. Let your budget and mechanical ability be your guide.
Good luck
TB
__________________
frontsightnsqueaz
|
The Following 3 Users Like Post:
|
|
08-31-2018, 12:34 PM
|
|
Member
|
|
|
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 31,000
Likes: 41,665
Liked 29,249 Times in 13,829 Posts
|
|
I hear good things about the Hornadys...
Nobody seems to like RCBS prog presses, though their other presses are top notch.
__________________
"He was kinda funny lookin'"
|
The Following 4 Users Like Post:
|
|
08-31-2018, 12:45 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,440
Likes: 23,462
Liked 26,339 Times in 9,131 Posts
|
|
I have had a 550 Dillon for 34 years, works great for me. I have a number of Cowboy Action Shooting friends that have Dillon's Square Deal presses and enjoy the ease of use. Some buy conversion kits to other rounds, some just buy an additional press!
Ivan
|
The Following 3 Users Like Post:
|
|
08-31-2018, 12:56 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
As much as I do not like unitasker tools, the Dillon SDB just for 38sp makes a lot of sense. 30y ago I went to progressive & had to choose between 550 & SDB. The proprietary dies turned me off & I went 550. A solid choice for the low production or high end shooter. Go fast or slow, treat it as an inverted turret or full progressive at 450-500rds per hour.
__________________
NRA Cert. Inst. IDPA CSO
|
The Following User Likes This Post:
|
|
08-31-2018, 12:57 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
Quote:
Originally Posted by rwsmith
Nobody seems to like RCBS prog presses, though their other presses are top notch.
|
The RCBS progressives are good presses. What turned me off was the strip priming. The newer one did away with it & I would consider one today. Though if you want a case feeder, the 650 really is slightly better press, just for the priming & case feeder.
__________________
NRA Cert. Inst. IDPA CSO
Last edited by fredj338; 08-31-2018 at 09:29 PM.
|
The Following 2 Users Like Post:
|
|
08-31-2018, 01:03 PM
|
|
Member
|
|
|
Join Date: Oct 2015
Location: Southern NJ
Posts: 4,684
Likes: 19,020
Liked 4,190 Times in 1,865 Posts
|
|
Back in the late '80s, I had a Dillon SDB for 38 Special, which I loved. As I started loading more pistol and rifle cartridges, I upgraded to a 550B so I could use my dies AND load rifle ammo on a progressive. The only Dillon that I have encountered that required that you use their dies is the SDB. If you are loading just 1 or 2 cartridges, you can't go wrong with a Dillon Square Deal B.
__________________
Judge control not gun control!
Last edited by lrrifleman; 08-31-2018 at 02:11 PM.
|
The Following 2 Users Like Post:
|
|
08-31-2018, 01:54 PM
|
Member
|
|
|
Join Date: Jul 2018
Location: Southern FL, East side.
Posts: 2,296
Likes: 2,331
Liked 3,028 Times in 1,260 Posts
|
|
Dillon 550!
|
The Following 4 Users Like Post:
|
|
08-31-2018, 02:08 PM
|
Member
|
|
|
Join Date: Jul 2016
Location: LaFontaine In.
Posts: 397
Likes: 5,628
Liked 629 Times in 236 Posts
|
|
PRESSES
I started out with a Dillon Square Deal B. I like it for what it was, straight walled pistol cases. I then bought a .30-30 lever gun and then traded it for a 550 B. Now I have a .45 1911, they have small primers & large primers. Now I'm thinking about buying the SDB back so I can set it up for small primers and the 550 for large primers. As for me it's Dillon all the way. I have a friend that likes RCBS. Everyone's taste is different. If you know anyone that has one ask them if you could "take it for a spin". Good luck on your choice. Keep us posted.
|
The Following User Likes This Post:
|
|
08-31-2018, 09:55 PM
|
Member
|
|
|
Join Date: Jul 2017
Posts: 112
Likes: 28
Liked 57 Times in 35 Posts
|
|
I LOVE my Hornady Progressive. for the money its a real step up over the Dillon in my mind. super fast caliber change over and auto indexing with and extra station. I love it!
|
The Following 3 Users Like Post:
|
|
09-01-2018, 12:07 AM
|
|
Member
|
|
|
Join Date: Mar 2012
Location: Eastern Pennsylvania
Posts: 1,033
Likes: 340
Liked 736 Times in 398 Posts
|
|
The SDB is a 4 hole, autoindex press. The 550 is a 4 hole, manual index press. When it comes to output, most users on Brian Enos site reported higher volumes with the 550 than with the SDB despite the indexing difference. The reason is your left hand is already there so no time is lost manually indexing. But why higher outputs? Don't know, could be related to the fact that the SDB has a much smaller working area . . . could be something else.
The SDB requires proprietary Dillon dies. The caliber range available for pistol is not complete, and there is no support for rifle.
The 550 is a little more expensive, but IMO (as a Hornady user) I'd still recommend the 550. You have the flexibility to change your mind in the future (adding pistol calibers, doing some rifle) without being locked into choosing from Dillon's available pistol dies.
JMO, YMMV
|
The Following 2 Users Like Post:
|
|
09-01-2018, 04:27 PM
|
Member
|
|
|
Join Date: May 2016
Location: 30min SE Montreal
Posts: 2,026
Likes: 150
Liked 1,540 Times in 841 Posts
|
|
I have an old Dillon 300(550's grand daddy)set up for all small primer calibers.My SDB is set up for all my large primer calibers.Considering the price of the dies for the SDB,if I'd redo it,I'd buy a 550 instead of the SDB.
To me,reloading is a nice moment of quietness that makes me relax.I do not reload for high output.I take my time.The old 300 will yield around 150 rds/hour while at the same rythm the SDB will add another 100 to this.
Whatever you buy,enjoy!
Last edited by Qc Pistolero; 09-01-2018 at 04:42 PM.
|
The Following User Likes This Post:
|
|
09-01-2018, 06:02 PM
|
|
Member
|
|
|
Join Date: Dec 2014
Location: North Dakota
Posts: 828
Likes: 2,296
Liked 1,189 Times in 438 Posts
|
|
I'm using the Dillon 550b I bought in 1986. The first stuff I set
it up for was 38spl, .223 and 45acp. Over the years I've added
a half dozen other calibers.
It runs like the day I bought it. Probably has 50k thru it. Just
keep it clean and your great great grand kids will use it.
FWIW, I use Dillon, RCBS, Lee and Hornady dies on it. They all
run fine.
__________________
never get out of the boat
|
The Following 2 Users Like Post:
|
|
09-01-2018, 07:03 PM
|
US Veteran
|
|
|
Join Date: Jun 2009
Location: SW Washington
Posts: 1,107
Likes: 616
Liked 288 Times in 168 Posts
|
|
I'm sure you can't go wrong with a Dillon, but I've been using my Lee Classic Turret for years with complete satisfaction. My most used cartridge is .38 special, and I usually shoot 150-200 rounds a week. I have no problem keeping stocked up on ammo with the Lee.
|
The Following User Likes This Post:
|
|
09-02-2018, 06:34 AM
|
|
Moderator SWCA Member Absent Comrade
|
|
|
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
|
|
If I were buying a progressive press it would be the Hornady Lock-N-Load AP Press. The RCBS progressive press looks great but at twice the price, it doesn't look that great.
I think the Hornady press has some great features not included in the Dillon 550.
I use a Lee Classic Turret Press for loading handgun ammo and I can safely load between 180 to 200 rounds per hour.
__________________
Freedom is never free!!
SWCA #3437
Last edited by ArchAngelCD; 09-02-2018 at 06:36 AM.
Reason: Autocorrect got me again!
|
The Following 4 Users Like Post:
|
|
09-02-2018, 07:02 AM
|
Member
|
|
|
Join Date: Sep 2005
Posts: 7,748
Likes: 1,642
Liked 9,152 Times in 3,380 Posts
|
|
I have a SD (not the 'B') so it's been here a while.
Bought it new in the late 70's IIRC and in 38sp as I was shooting Bullseye.
That's all I ever loaded on it,,38sp.
I do have a 9mm conversion but it's never been on the machine.
Recently I had Dillon send me some of the misc Delrin parts to the machine and I'm going to rebuild it. But I still haven't gotten around to that.
It works for me.
I don't need buckets full of ammo for anything I shoot. I don't really need much 38sp anymore either!. But the SD is a pleasure to use.
Everything else, pistol and rifle is produced on a single stage a box or two at a time.
That's enough production for my needs at the range.
If I were in to more ammo production for any of the calibers I load for,,I'd be in the market for one of the other Dillon or other brand of progressives that'd handle rifle and pistol rounds.
|
The Following User Likes This Post:
|
|
09-02-2018, 10:34 AM
|
|
Member
|
|
|
Join Date: Jul 2017
Location: Miami, FL
Posts: 1,677
Likes: 5,138
Liked 2,955 Times in 1,021 Posts
|
|
Quote:
Originally Posted by kgpcr
I LOVE my Hornady Progressive. for the money its a real step up over the Dillon in my mind. super fast caliber change over and auto indexing with and extra station. I love it!
|
I give my Hornady LnL a mixed review.
It's great for changing calibers, takes just a minute or two if you are loading the same primer size.
That said, it's jerky and tends to launch powder out of the cases if you aren't careful.
The supplied Hornady powder drop was not reliable for me at all, and has been replaced with a Lee Auto Drum that has been amazing. It also is pretty involved to set-up, while the Lee literally just screws onto a Lee expanding die and you are ready to set the powder drop amount.
The plastic bracket over the primer plate arm warped and had to be replaced; Hornady included an extra which is simultaneously thoughtful but also shows they know it's a problem but haven't fixed it.
Shell plate comes loose with out a locking washer.
The rubber o-rings on the die bushings shrink (especially if exposed to the Hornady Dry Lube) and no longer hold the dies in place. Hornady doesn't sell the rubber o-rings separately, so I end up wedging paper under them to keep them in place.
So, while I agree that swapping calibers in a minute is great and useful (I load 7 calibers currently), if I just planned to load one caliber I'd get a Lee progressive. I've bought several sets of Lee dies and a powder drop and despite their low cost they have all functioned at least as well as the RCBS and Hornady stuff I have bought.
|
The Following 3 Users Like Post:
|
|
09-02-2018, 08:35 PM
|
|
Member
|
|
|
Join Date: Feb 2013
Location: Brandon Sunny Florida
Posts: 878
Likes: 1,997
Liked 1,123 Times in 366 Posts
|
|
Quote:
Originally Posted by dr. mordo
I give my Hornady LnL a mixed review.
It's great for changing calibers, takes just a minute or two if you are loading the same primer size.
That said, it's jerky and tends to launch powder out of the cases if you aren't careful.
The supplied Hornady powder drop was not reliable for me at all, and has been replaced with a Lee Auto Drum that has been amazing. It also is pretty involved to set-up, while the Lee literally just screws onto a Lee expanding die and you are ready to set the powder drop amount.
The plastic bracket over the primer plate arm warped and had to be replaced; Hornady included an extra which is simultaneously thoughtful but also shows they know it's a problem but haven't fixed it.
Shell plate comes loose with out a locking washer.
The rubber o-rings on the die bushings shrink (especially if exposed to the Hornady Dry Lube) and no longer hold the dies in place. Hornady doesn't sell the rubber o-rings separately, so I end up wedging paper under them to keep them in place.
So, while I agree that swapping calibers in a minute is great and useful (I load 7 calibers currently), if I just planned to load one caliber I'd get a Lee progressive. I've bought several sets of Lee dies and a powder drop and despite their low cost they have all functioned at least as well as the RCBS and Hornady stuff I have bought.
|
Home Depot sell O rings for next to nothing, if you douse rubber with Dry lube, it really doesn't matter whos press you run... PM me with your LNL sale price..
thewelshm
|
09-02-2018, 08:42 PM
|
|
Member
|
|
|
Join Date: Dec 2004
Location: Surprise, Az. USA
Posts: 1,724
Likes: 3,204
Liked 2,531 Times in 795 Posts
|
|
I've had Dillons since I started reloading 40 years ago starting with the Dillon 300 etc. I settled on the 550 for many years but recently went with the 650 because of my monthly round count. I ordered a Mr. Bullet feeder as well and started cranking out 800 rounds per hour.
Dillon has a 100 % warrantee. Over the years I've had a few small parts wear out and Dillon has always sent me the new part at no charge.
I highly recommend their machines.
|
The Following 3 Users Like Post:
|
|
09-02-2018, 09:09 PM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,657
Likes: 1,569
Liked 9,427 Times in 4,225 Posts
|
|
38 Special only? Star Progressive. Buy once, cry once about price, then forget it as you load forever. Now that Bruce Williams has bought the patents and all rights to the original Star company, any and all parts and accessories one could need to use it forever. Also it comes at a lower price than the Universal Progressive since it was built purely for loading 38 Special. I've got a Dillon 550 also set for 38 Special, but there's just something about the quality of a Star...
Froggie
|
The Following User Likes This Post:
|
|
09-02-2018, 09:31 PM
|
Member
|
|
|
Join Date: Nov 2010
Location: WINCHESTER, VIRGINIA
Posts: 3,356
Likes: 4,437
Liked 4,433 Times in 1,463 Posts
|
|
Quote:
Originally Posted by Green Frog
38 Special only? Star Progressive. Buy once, cry once about price, then forget it as you load forever. Now that Bruce Williams has bought the patents and all rights to the original Star company, any and all parts and accessories one could need to use it forever. Also it comes at a lower price than the Universal Progressive since it was built purely for loading 38 Special. I've got a Dillon 550 also set for 38 Special, but there's just something about the quality of a Star...
Froggie
|
Froggie, who sells their stuff these days? Not really looking for speed as much as the range fodder need not be single stage. THANKS!!!
|
09-02-2018, 09:57 PM
|
Banned
|
|
|
Join Date: Apr 2009
Location: FL
Posts: 1,973
Likes: 2,364
Liked 2,962 Times in 1,115 Posts
|
|
Quote:
Originally Posted by dr. mordo
I give my Hornady LnL a mixed review.
It's great for changing calibers, takes just a minute or two if you are loading the same primer size.
That said, it's jerky and tends to launch powder out of the cases if you aren't careful.
The supplied Hornady powder drop was not reliable for me at all, and has been replaced with a Lee Auto Drum that has been amazing. It also is pretty involved to set-up, while the Lee literally just screws onto a Lee expanding die and you are ready to set the powder drop amount.
The plastic bracket over the primer plate arm warped and had to be replaced; Hornady included an extra which is simultaneously thoughtful but also shows they know it's a problem but haven't fixed it.
Shell plate comes loose with out a locking washer.
The rubber o-rings on the die bushings shrink (especially if exposed to the Hornady Dry Lube) and no longer hold the dies in place. Hornady doesn't sell the rubber o-rings separately, so I end up wedging paper under them to keep them in place.
So, while I agree that swapping calibers in a minute is great and useful (I load 7 calibers currently), if I just planned to load one caliber I'd get a Lee progressive. I've bought several sets of Lee dies and a powder drop and despite their low cost they have all functioned at least as well as the RCBS and Hornady stuff I have bought.
|
My LNL is mounted on an Inline Fabrication press riser and that is secured on a very steady bench with NO issues. It would be a great press for 38s (mine is set up for that now and it is flawless)
|
09-02-2018, 10:20 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,682
Likes: 5,952
Liked 11,984 Times in 2,992 Posts
|
|
Quote:
Originally Posted by GyMac
I'm sure you can't go wrong with a Dillon, but I've been using my Lee Classic Turret for years with complete satisfaction. My most used cartridge is .38 special, and I usually shoot 150-200 rounds a week. I have no problem keeping stocked up on ammo with the Lee.
|
I’m a relative newby, starting out with a Lee Classic Turret about a year ago. It’s been a great press so far. I’ve loaded .357sig, .45ACP, and 10mm/.40 with it, all auto cartridges. I just bought dies and turret plates for .38/.357 and .41Mag, and will be trying my hand at rimmed cartridges soon.
__________________
USS Brewton FF1086
SWCA#3597
|
The Following User Likes This Post:
|
|
09-02-2018, 10:24 PM
|
Member
|
|
|
Join Date: Jul 2010
Location: Northern Michigan Woods
Posts: 304
Likes: 112
Liked 328 Times in 133 Posts
|
|
Dillon 550B. Set it up and rock & roll.
|
The Following 2 Users Like Post:
|
|
09-02-2018, 10:35 PM
|
|
Member
|
|
|
Join Date: Oct 2017
Location: Kenora, Canada
Posts: 320
Likes: 68
Liked 119 Times in 73 Posts
|
|
Lee just launched a new Pro1000 this summer. I have the last model and it works great. The price was right - on sale. I have put close to 40,000 rounds through it now (mostly 9 mm) but a lot of 38spl also. Enjoy your reloading.
|
The Following 2 Users Like Post:
|
|
09-04-2018, 10:10 AM
|
Member
|
|
|
Join Date: Mar 2016
Location: Northern CA
Posts: 10
Likes: 0
Liked 4 Times in 3 Posts
|
|
I started reloading on the Lee classic turret at about 200 rnds of 9mm an hour. Then moved to a used Loadmaster. I don't prime on press so that removes the point of frustration experienced by most users. With the standard case feeder and modd'ed bullet feeder, I can do around 400 - 450 rnds an hour when I'm in the groove.
|
09-04-2018, 10:35 AM
|
Member
|
|
|
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,918
Likes: 14,058
Liked 13,765 Times in 4,990 Posts
|
|
Way back I wanted auto indexing and the Dillon 650 hadn't been invented yet so I bought 2 SDB's and 6 caliber conversions. This was around 79 or 1980. Both still run perfectly. I load LOTS of pistola cartridges.
__________________
S&W Accumulator
|
The Following 2 Users Like Post:
|
|
09-04-2018, 02:04 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
Quote:
Originally Posted by 5akman
I started reloading on the Lee classic turret at about 200 rnds of 9mm an hour. Then moved to a used Loadmaster. I don't prime on press so that removes the point of frustration experienced by most users. With the standard case feeder and modd'ed bullet feeder, I can do around 400 - 450 rnds an hour when I'm in the groove.
|
But you are NOT doing 400/hour because you have to include priming off the press?????
__________________
NRA Cert. Inst. IDPA CSO
|
The Following 2 Users Like Post:
|
|
09-04-2018, 03:20 PM
|
Member
|
|
|
Join Date: Jan 2016
Location: ARIZONA
Posts: 1,005
Likes: 103
Liked 1,475 Times in 601 Posts
|
|
If I knew I would only be loading 38 special with a press and I knew I wanted a reliable, dependable progressive unit with a lifetime warranty, I would look no further than the Dillion Square Deal. If I wanted the same attributes in a reloader and thought I would be reloading other calibers in the future, I would go with the Dillon XL650.
|
The Following 3 Users Like Post:
|
|
09-04-2018, 05:34 PM
|
Member
|
|
|
Join Date: Feb 2006
Location: San Antonio Texas
Posts: 410
Likes: 109
Liked 321 Times in 151 Posts
|
|
My Dillon 550 has worked great for many years.
My brother has had repeated problems w his LNL. I haven't tried his press so can't say why. He is a mechanical engineer and is mechanically inclined. I'm mechanically challenged. Did I mention my Dillon has worked fine for many years w/o any problems.
Never used a Lee progressive. While I use a lot of Lee products I see a lot of discussion about issues w Lee progressive presses. Dont see those type discussions about Dillon.
I'm not an expert on why x press is better than y press. I do know I like my Dillon. It works w/o issues or problems and will do both rifle and pistol ammo.
|
The Following 2 Users Like Post:
|
|
09-04-2018, 07:07 PM
|
Member
|
|
|
Join Date: Mar 2016
Location: Northern CA
Posts: 10
Likes: 0
Liked 4 Times in 3 Posts
|
|
Quote:
Originally Posted by fredj338
But you are NOT doing 400/hour because you have to include priming off the press?????
|
Correct, that is after I have the primed cases ready to drop into the case feeder.
I always tumble my cases after each firing so I decap/size, tumble, prime then head to the Loadmaster.
|
09-04-2018, 07:12 PM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,657
Likes: 1,569
Liked 9,427 Times in 4,225 Posts
|
|
Quote:
Originally Posted by J. R. WEEMS
Froggie, who sells their stuff these days? Not really looking for speed as much as the range fodder need not be single stage. THANKS!!!
|
JRW, head over to the Star Reloaders website and you should be able to find what you need. I had found my Progressive about 20 years ago when they were at a low point in availability, but it needed a few parts to be up and running. I found what I needed through that website.
Froggie
|
09-04-2018, 09:14 PM
|
SWCA Member
|
|
|
Join Date: Dec 2005
Location: Missouri City, Texas
Posts: 1,139
Likes: 2,744
Liked 1,720 Times in 614 Posts
|
|
Dillon 650 with any dies you want.
Sent from my iPhone using Tapatalk
|
The Following 4 Users Like Post:
|
|
09-04-2018, 09:27 PM
|
Member
|
|
|
Join Date: Mar 2003
Location: New England, USA
Posts: 4,470
Likes: 3,071
Liked 4,295 Times in 1,611 Posts
|
|
LOVE my LEE Classic Turret Presses. They run great and give me a solid 150-180 quality rounds an hour. However based on my experience with both Lee Progresives, I would advise against both the Lee 1000 and Load Master. In my ownership experience , both models were temperamental with case and primer feeding( and prone to stoppages for a whole lot of reasons.) To be honest, I don't think I ever came close to 300 rounds an hour with either model.
p.s. I also had a early Dillon Square Deal that wasn't much better. IF I wanted another full Progressive (which I don't) I'd go right to the Dillon 650 and be done with it.
__________________
Dave
Last edited by Wee Hooker; 09-04-2018 at 09:31 PM.
|
The Following 3 Users Like Post:
|
|
09-04-2018, 10:32 PM
|
Member
|
|
|
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,918
Likes: 14,058
Liked 13,765 Times in 4,990 Posts
|
|
Quote:
Originally Posted by 5akman
Correct, that is after I have the primed cases ready to drop into the case feeder.
I always tumble my cases after each firing so I decap/size, tumble, prime then head to the Loadmaster.
|
3 extra steps before going to the progressive loader? Good progressives handle all that but the tumble with 1(one) pull of the handle.
__________________
S&W Accumulator
|
09-04-2018, 11:03 PM
|
Member
|
|
|
Join Date: Jul 2018
Location: Southern FL, East side.
Posts: 2,296
Likes: 2,331
Liked 3,028 Times in 1,260 Posts
|
|
I had/still have a Lee 1000 (I think). I could really crank out some ammo with it during the shot periods of time it worked correctly. I finally just stuffed it in my cabinet. Hopefully Lee worked out the bugs with their progressives but they lost me with that one.
I do use some Lee dies. And I use a little Lee hand press for working up loads at the range. I just size, prime and flare (if appropriate) and then bring scale, powder and bullets and the little hand press with die. I'm not bashing Lee. I like Lee but that progressive stank.
I love the Dillon 550 and I loved the 450 I had first. I actually still have the 450 but it just stays on one caliber. The 550 is really a pretty quick caliber change.
I don't want an auto indexing press. I don't want to go that fast. I check powder weights fairly often and I can still crank out plenty of ammo for my use and that of my family. I can understand some people needing a 650, etc. but that's not me.
|
09-05-2018, 01:14 AM
|
Member
|
|
|
Join Date: Mar 2016
Location: Northern CA
Posts: 10
Likes: 0
Liked 4 Times in 3 Posts
|
|
Quote:
Originally Posted by Mike, SC Hunter
3 extra steps before going to the progressive loader? Good progressives handle all that but the tumble with 1(one) pull of the handle.
|
Agreed but for many hundreds of dollars less money, I'll opt for the Loadmaster. And from what I've heard, sounds like Lee has the priming snafu's solved with the newer Loadmasters.
|
The Following User Likes This Post:
|
|
09-05-2018, 07:27 AM
|
Member
|
|
|
Join Date: Mar 2003
Location: New England, USA
Posts: 4,470
Likes: 3,071
Liked 4,295 Times in 1,611 Posts
|
|
Quote:
Originally Posted by 5akman
Agreed but for many hundreds of dollars less money, I'll opt for the Loadmaster. And from what I've heard, sounds like Lee has the priming snafu's solved with the newer Loadmasters.
|
Mine may be a lemon but my 9mm loadmaster (bought on a whim at 50% off) is only two years old. It has been ANYTHING but reliable. Priming issues are still there and the case feeder is unusable. Even powder management has given me grief. Even though I'm no novice at reloading ( and have a Mechanical Engineering degree) I'm honestly unable to get 50 rounds out of it without a stoppage. I'd be happy to box it up and sell it CHEAP to anybody who thinks it will treat them better.
__________________
Dave
|
09-05-2018, 08:11 AM
|
Member
|
|
|
Join Date: Oct 2003
Location: Alabama
Posts: 561
Likes: 111
Liked 527 Times in 249 Posts
|
|
Overwhelming choice of competitive shooters is Dillon . They just work with less “fiddle factor” . I would push you toward a 650 with case feeder but 550s are fine, just slower (but not slow).
|
The Following 4 Users Like Post:
|
|
09-05-2018, 09:34 AM
|
Member
|
|
|
Join Date: Mar 2016
Location: Northern CA
Posts: 10
Likes: 0
Liked 4 Times in 3 Posts
|
|
Quote:
Originally Posted by Wee Hooker
Mine may be a lemon but my 9mm loadmaster (bought on a whim at 50% off) is only two years old. It has been ANYTHING but reliable. Priming issues are still there and the case feeder is unusable. Even powder management has given me grief. Even though I'm no novice at reloading ( and have a Mechanical Engineering degree) I'm honestly unable to get 50 rounds out of it without a stoppage. I'd be happy to box it up and sell it CHEAP to anybody who thinks it will treat them better.
|
You might have a lemon. I know I bought mine used from a guy who was "done" with it and then watched a lot of youtube videos on how to get it running. I'd like to try some updated primer feed parts but don't mind the process that I do now as I like "shinny" brass. I realize that it has nothing to do with the quality of the finished product or how accurate I am, but I always tumble after each firing so the off press priming works for me.
If anyone is in the Kenai Alaska area, the "Bargain Basement" thrift store had a nice Dillion set up for sale at a reasonable price. It was a 650 if I remember correctly. I'd have bought it but then would have needed to ship it home to CA.
|
09-05-2018, 10:50 AM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
Jmo, using a progressive is severely degraded when you move priming off the press. I understand clean, shiny brass, just dry tumble before sizing, which you should do before sizing to protect your dies. Then do everything on the press.
Priming is the short coming of most progressives. Even the dillon 550, a good press, has priming issues because of the design. The 650, almost flawless priming but still not perfect. The redt fall inbetween.
Money spent on tools is always funny to me. Buy good tools, You only buy them once & they do the job required w/o unnecessary bs. When you look at the cost of ammo vs even a fully kittted 650, its a small amount over say 10y. With some calibers, time vs money, I am making money reloading at 600-700rds per hour. Yes great thing about a progressive though is you choose your speed. 100rds an hour with 104 handle oulls, or 700rds per hour with 704 handle pulls. Shoot a lot, those handle pulls add up & A few $100 more, not an issue.
__________________
NRA Cert. Inst. IDPA CSO
Last edited by fredj338; 09-05-2018 at 10:53 AM.
|
The Following 4 Users Like Post:
|
|
09-05-2018, 11:01 AM
|
Banned
|
|
|
Join Date: Apr 2009
Location: FL
Posts: 1,973
Likes: 2,364
Liked 2,962 Times in 1,115 Posts
|
|
Quote:
Originally Posted by ArchAngelCD
If I were buying a progressive press it would be the Hornady Lock-N-Load AP Press. The RCBS progressive press looks great but at twice the price, it doesn't look that great.
I think the Hornady press has some great features not included in the Dillon 550.
I use a Lee Classic Turret Press for loading handgun ammo and I can safely load between 180 to 200 rounds per hour.
|
Finally got my LnL set up after moving; been running 38s through it for now and will soon switch it over for 9mm; beats the heck out of the single stage I used for decades (which will now be used for rifles)
|
The Following User Likes This Post:
|
|
09-07-2018, 01:13 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2011
Location: Indiana
Posts: 196
Likes: 624
Liked 769 Times in 137 Posts
|
|
Buy a Dillon press and never look back. I've owned numerous Dillon presses since buying my first one in 1983. Great presses and absolutely the best customer service in the business.
|
The Following 2 Users Like Post:
|
|
09-07-2018, 05:10 PM
|
|
Member
|
|
|
Join Date: Jun 2011
Location: SOUTH WEST IOWA
Posts: 100
Likes: 82
Liked 85 Times in 36 Posts
|
|
No BS Warranty / No Risk Life Time Warranty. Can anyone tell me the difference besides one is Blue and the other is Red?
|
09-07-2018, 06:30 PM
|
Member
|
|
|
Join Date: Jul 2018
Location: Southern FL, East side.
Posts: 2,296
Likes: 2,331
Liked 3,028 Times in 1,260 Posts
|
|
I think experience would be the best determination on the quality of warranties. However, I've never had anything break on my Dillon. Maybe someone else has had to actually use them and can comment.
|
09-07-2018, 11:28 PM
|
|
Member
|
|
|
Join Date: Jun 2011
Location: SOUTH WEST IOWA
Posts: 100
Likes: 82
Liked 85 Times in 36 Posts
|
|
Can anyone see a problem with this photo?
|
The Following User Likes This Post:
|
|
09-08-2018, 12:49 AM
|
Member
|
|
|
Join Date: Feb 2010
Location: Wyoming
Posts: 6,174
Likes: 6,401
Liked 7,086 Times in 3,003 Posts
|
|
Sure...too much R...no B or G!! LOL
|
09-08-2018, 08:22 AM
|
|
US Veteran
|
|
|
Join Date: Aug 2007
Location: Augusta, GA
Posts: 6,127
Likes: 6,652
Liked 6,170 Times in 2,674 Posts
|
|
Anyone that gets a Lee progressive press to run for 200 rounds of ammo without a jamup is either 'mentally gifted' or incredibly lucky and should immediately buy Lotto / Lottery tickets.
__________________
S&WHF 366
Last edited by Engineer1911; 09-08-2018 at 09:50 PM.
|
The Following 5 Users Like Post:
|
|
09-08-2018, 07:55 PM
|
|
Member
|
|
|
Join Date: Feb 2006
Location: Kalif. usa
Posts: 6,836
Likes: 2,665
Liked 3,927 Times in 2,366 Posts
|
|
Quote:
Originally Posted by DRAINSMITH
No BS Warranty / No Risk Life Time Warranty. Can anyone tell me the difference besides one is Blue and the other is Red?
|
All of the reloading industry has great CS. I have never had to pay for a part from any of them, but Lee was the most difficult, wanting me to return the defective bullet mold, my dime, before they would replace it. So paying for shipping w/o compensation kinda sucks.
__________________
NRA Cert. Inst. IDPA CSO
|
09-09-2018, 12:23 AM
|
|
Member
|
|
|
Join Date: Jun 2011
Location: SOUTH WEST IOWA
Posts: 100
Likes: 82
Liked 85 Times in 36 Posts
|
|
O.K. after 24 hours no one is going to get it.
When I got my new Hornady Primer Pocket Swage Tool I mounted it right away and saged 100 pieces of .223 only to find out that I had not removed the V- Block. In the prosses, I crushed the snot out of the Case Slide Rod Guide Spring. I sent this photo to Hornady telling them that I needed a new spring and because it was the loose nut pulling the handles fault The Bone Head wants to pay.
Now, this is what she told me "No charge the instructions for the swage tool didn't say HEY BONEHEAD REMOVE THE V-BLOCK" Not only did they send the spring they sent the next higher assy.
Now, Mr. OINK "I refuse to call anyone from LEO Oink"The only reason I posted this is to let everyone know that most of the other manufacturers have just as good of a warranty as Dillon.
|
|
|
Posting Rules
|
|
|
|
|