|
|
09-17-2018, 02:01 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Loading.380 for pocket pistols
Howdy folks,
I've been loading .380 for a couple of mil surp autoloaders .
Some of you guys helped out when I was settling on a load and
thanks for that !
What I have been running is real old school.
95gr FMJ over 3gr Unique with an AOL of .972 .
Works great in my two European blow back guns.
Last week I picked up an interesting "little" offering from Beretta.
Its a 3rd generation Pico.
They have smoothed out the bumps and I'm well pleased with the little guy and because I'm a hand loader I tried my .380 load in there and it wasn't strong enough to cycle the gun.
No big deal. I'll tool up a round for the Pico.
This gun is rated for +P and as such has a very strong recoil spring , so strong in fact that folks complain about it. Beretta has changed the spring and in fact its fine. It functions as intended and as stated , but I want to run some practice rounds through the thing so here are my questions:
Any of you own this pistoleta ?
Any body load for it ?
Any one have any thoughts about the excess rigidity of the factory spring which Beretta is not offering any variations of, there by precluding the possibility of any tuning by varying the spring strength?
Finally, I have one reloading book the Richard Lee that would allow up to a compressed 4.6 gr charge of Unique for this round.
Not so sure I want to start out that hot. But in your experience can I go this hot ? The gun is rated for +P .
Thoughts ?
|
09-17-2018, 02:24 PM
|
Member
|
|
|
Join Date: Aug 2005
Posts: 7,575
Likes: 4
Liked 8,917 Times in 4,135 Posts
|
|
This is a very small capacity case and there is little room for error when approaching even a near maximum load. Use the Lee book for reference only. Lee didn't necessarily shoot these loads; they compiled the data from others sources. Often the Lee book does not identify a particular bullet, only the weight. This is not enough information for the handloader.
Get at least one other current loading manual, a Lyman would be a good start. I have loaded for several .380s. I don't know what a "Pico" is, but that Unique load sounds excessive to me, though it may not be. I'd have to research it with several manuals. Best to check a variety of sources for comparison and stay away from Internet information that doesn't come from the website of a reputable manufacturer or distributor.
|
The Following User Likes This Post:
|
|
09-17-2018, 02:25 PM
|
Member
|
|
|
Join Date: Oct 2014
Posts: 159
Likes: 16
Liked 131 Times in 60 Posts
|
|
I use Win 231 or Aillant power pistol for mine, no complaints
|
The Following 3 Users Like Post:
|
|
09-17-2018, 02:26 PM
|
Member
|
|
|
Join Date: Feb 2010
Posts: 5,835
Likes: 5,161
Liked 5,242 Times in 2,483 Posts
|
|
I only reloaded for one blow back .380 a long time ago but I have two thoughts. First, in the U.S. there is no recognized .380 +P. Here's a link to established pressure standards: https://saami.org/wp-content/uploads...MI_CFPandR.pdf If the gun is actually stamped +P or +P is in the instruction manual you'd have to ask Beretta if +P means anything specific for their engineers. Other wise you go above book loads as an experimenter. Second, if Wolff does not offer recoil springs I'd buy an extra factory spring and clip off coils until the target loads functioned.
|
The Following User Likes This Post:
|
|
09-17-2018, 02:39 PM
|
|
SWCA Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,579
Likes: 3,066
Liked 22,559 Times in 5,844 Posts
|
|
Back in my younger days when I did load for the 380ACP, I started with Unique as well.
Eventually I switched to 231 and really liked the change. For me it was cleaner burning. Less powder yielded greater velocity.
I went from 4 grains of Unique to 3.1 grains of 231 with my 95 grain FMJ or JHPs
|
The Following 3 Users Like Post:
|
|
09-17-2018, 02:42 PM
|
|
Member
|
|
|
Join Date: Apr 2009
Location: MIAMI
Posts: 348
Likes: 10
Liked 60 Times in 31 Posts
|
|
You're going to work this one backward. You have a load the works the slide. Now you going to go backwards. Start cutting back on the Powder till you get one the works. add 1/4 gram more to play it safe and that's your range ammo. I know you know this one. Never use reloads for SD ammo.
Rick
|
09-17-2018, 02:53 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,079
Likes: 10,794
Liked 15,506 Times in 6,794 Posts
|
|
"Technically" there is no +P rating for the 380 ACP
What is advertised is just max loads or a tad over.
Try a little "faster" powder like HP38/Win 231
Or use a better load of UNIQUE (3.0 gr is a mouse fart)
Buy some actual manuals like RCBS and Hornady
For the new little pistol, take the empty gun and rack the slide at least 100 times. Rack the slide back and lock it back leave it for a day or so,
Rack the slide 100 more times
You are "breaking it in" without shooting it
The Lee Manual is just data collected from other places and has not change in 100 years!
__________________
Still Running Against the Wind
|
The Following 2 Users Like Post:
|
|
09-17-2018, 03:18 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by dannyabear
I use Win 231 or Aillant power pistol for mine, no complaints
|
Thanks. What are your gr. weights ? Just a range, no need to be too specific. No liability on your part.
|
09-17-2018, 03:20 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by k22fan
I only reloaded for one blow back .380 a long time ago but I have two thoughts. First, in the U.S. there is no recognized .380 +P. Here's a link to established pressure standards: https://saami.org/wp-content/uploads...MI_CFPandR.pdf If the gun is actually stamped +P or +P is in the instruction manual you'd have to ask Beretta if +P means anything specific for their engineers. Other wise you go above book loads as an experimenter. Second, if Wolff does not offer recoil springs I'd buy an extra factory spring and clip off coils until the target loads functioned.
|
Yep , no wolff springs for this one. I like your suggestion though. I want a load that cycles all my .380 pistols. Don't want to be changing my powder drop for every gun. Thats nuts .
|
09-17-2018, 03:21 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by colt_saa
Back in my younger days when I did load for the 380ACP, I started with Unique as well.
Eventually I switched to 231 and really liked the change. For me it was cleaner burning. Less powder yielded greater velocity.
I went from 4 grains of Unique to 3.1 grains of 231 with my 95 grain FMJ or JHPs
|
Thanks , That gives me a range of gr. weights .
|
09-17-2018, 03:31 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by Rule3
"Technically" there is no +P rating for the 380 ACP
What is advertised is just max loads or a tad over.
Try a little "faster" powder like HP38/Win 231
Or use a better load of UNIQUE (3.0 gr is a mouse fart)
Buy some actual manuals like RCBS and Hornady
For the new little pistol, take the empty gun and rack the slide at least 100 times. Rack the slide back and lock it back leave it for a day or so,
Rack the slide 100 more times
You are "breaking it in" without shooting it
The Lee Manual is just data collected from other places and has not change in 100 years!
|
I have the Lyman which recommends a much lighter load than the Lee. The Lee has a ton of data but it does seem a bit random at times.
The whole +P thing is a murky designation at best. Folks buy these little pocket guns and want to load them with small nuclear devices , or so it seems. Its a market that seeks to meet a perceived need that may not exist.
So Beretta makes this little gun that the grannys who buy it are unable to operate because they beefed up the springs to withstand a +P (whatever that may be) cartridge. Then they are forced to modify the product with lighter springs .
I can operate the slide just fine as it is. My pistol has the lighter factory spring . Still its too stiff to cycle my 3 gr load.
Its interesting to me. Great engineering but with a customer in mind that is , shall we say inexperienced in the handling of firearms. Seems like a weird position for a company to be in.
|
09-17-2018, 07:18 PM
|
Member
|
|
|
Join Date: Aug 2005
Posts: 7,575
Likes: 4
Liked 8,917 Times in 4,135 Posts
|
|
I only loaded cast bullets when I loaded for several .380s. I used bullets from 93 grs. to 122 grs. Jacketed bullets may and probably will respond differently to powders from both accuracy and velocity perspectives.
I tried a variety of powders including Unique, Blue Dot, Herco, 231, and Bullseye. Best overall powder was easily Win. 231. Bullseye may have been second. Lots of other powders may also work well.
Find a load that functions in the gun reliably, is accurate, and one you can hit with consistently. Don't worry about +P. If you "need" +P velocity, you "need" a bigger cartridge than the .380.
Test accuracy at 25 yards from a solid benchrest using good technique. This will quickly tell you which loads are accurate. You can't do this up close because everything is accurate up close.
|
The Following User Likes This Post:
|
|
09-17-2018, 07:44 PM
|
Member
|
|
|
Join Date: Apr 2014
Location: Central Florida
Posts: 798
Likes: 582
Liked 470 Times in 273 Posts
|
|
Ive used W231, Red Dot, and BE86.
|
The Following User Likes This Post:
|
|
09-17-2018, 09:30 PM
|
Banned
|
|
|
Join Date: Jun 2016
Location: USA
Posts: 1,285
Likes: 1,112
Liked 1,609 Times in 660 Posts
|
|
I reload my 380's straight out of Hornady's 9th edition manual.
2.9gr titegroup, 90gr Hornady XTP with a COL 0.965".
Functions beautifully out of a S&W bodyguard 380 & Bersa Thunder 380.
|
09-18-2018, 06:57 AM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,079
Likes: 10,794
Liked 15,506 Times in 6,794 Posts
|
|
Quote:
Originally Posted by Al W.
I have the Lyman which recommends a much lighter load than the Lee. The Lee has a ton of data but it does seem a bit random at times.
The whole +P thing is a murky designation at best. Folks buy these little pocket guns and want to load them with small nuclear devices , or so it seems. Its a market that seeks to meet a perceived need that may not exist.
So Beretta makes this little gun that the grannys who buy it are unable to operate because they beefed up the springs to withstand a +P (whatever that may be) cartridge. Then they are forced to modify the product with lighter springs .
I can operate the slide just fine as it is. My pistol has the lighter factory spring . Still its too stiff to cycle my 3 gr load.
Its interesting to me. Great engineering but with a customer in mind that is , shall we say inexperienced in the handling of firearms. Seems like a weird position for a company to be in.
|
For HP 38/Win 231
Set your sights on pistol reloading data | Hodgdon Reloading
A 380 is what it is you can't get blood out of a stone.
__________________
Still Running Against the Wind
|
The Following User Likes This Post:
|
|
09-18-2018, 09:26 AM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by Rule3
|
I don't want blood out of a stone , I want the case out of the slide .
|
09-18-2018, 10:48 AM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,595
Likes: 239
Liked 29,105 Times in 14,073 Posts
|
|
For a long time my standard .380 load has been 4.0 Unique with the 100 grain Berry's copper plated lead bullet. MV is just shy of 900 ft/sec. It works fine in all my .380s.
|
The Following User Likes This Post:
|
|
09-18-2018, 12:26 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Where this month?
Posts: 3,604
Likes: 264
Liked 4,215 Times in 1,714 Posts
|
|
Quote:
Originally Posted by Al W.
I'm a hand loader I tried my .380 load in there and it wasn't strong enough to cycle the gun.
No big deal. I'll tool up a round for the Pico.
This gun is rated for +P and as such has a very strong recoil spring , so strong in fact that folks complain about it. Beretta has changed the spring and in fact its fine. It functions as intended and as stated , but I want to run some practice rounds through the thing
|
Since your present load does not cycle the gun (as mentioned, it's light) bump it up until it does..reloading 101 here..
|
The Following User Likes This Post:
|
|
09-18-2018, 12:37 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,079
Likes: 10,794
Liked 15,506 Times in 6,794 Posts
|
|
Quote:
Originally Posted by Al W.
I don't want blood out of a stone , I want the case out of the slide .
|
Already been answered.
Not gonna post actual loads. but your current Unique load taint it.
__________________
Still Running Against the Wind
|
09-18-2018, 12:41 PM
|
Member
|
|
|
Join Date: Oct 2014
Posts: 159
Likes: 16
Liked 131 Times in 60 Posts
|
|
[QUOTE=Al W.;140170456]Thanks. What are your gr. weights ? Just a range, no need to be too specific. No liability on your part.[/QUOT
Don't have that info handy, but it was off of the powder website
|
09-18-2018, 03:08 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by DWalt
For a long time my standard .380 load has been 4.0 Unique with the 100 grain Berry's copper plated lead bullet. MV is just shy of 900 ft/sec. It works fine in all my .380s.
|
I did a series of 5 rounds from 3.2 to 4 gr. of Unique. Curious as to where the gun begins to cycle.
|
09-18-2018, 03:10 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by bigggbbruce
Since your present load does not cycle the gun (as mentioned, it's light) bump it up until it does..reloading 101 here..
|
Yep , I know. Just thought it was curious that this one gun of all the others , while a mouse gun, the others being service weapons would not cycle the firearm.
Its a product specific question. Not a general one.
|
09-18-2018, 03:59 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,401
Likes: 3,189
Liked 12,760 Times in 5,686 Posts
|
|
If you like Unique powder for the 380 case..............
A 124gr JHP at a OAL of 1.075" in a 9mm case
( example only )
will take a compressed load of Unique at say, 4.5 grs....... +/-.
If you switch to BE-86 powder...........
a full load will be around 5.8 grs +/-.
BE-86 is the way to go with small case ammo, if you can find it.
BE-86 max load gave me 1220fps and w231 gave me 1166fps
out of a 5" 9mm barrel.
Just a heads up.
Safe loading.
|
The Following User Likes This Post:
|
|
09-18-2018, 04:54 PM
|
|
Member
|
|
|
Join Date: Feb 2008
Location: Florida
Posts: 22,079
Likes: 10,794
Liked 15,506 Times in 6,794 Posts
|
|
Quote:
Originally Posted by Al W.
Yep , I know. Just thought it was curious that this one gun of all the others , while a mouse gun, the others being service weapons would not cycle the firearm.
Its a product specific question. Not a general one.
|
It's miniature Rocket Science.
__________________
Still Running Against the Wind
|
09-18-2018, 05:18 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Where this month?
Posts: 3,604
Likes: 264
Liked 4,215 Times in 1,714 Posts
|
|
Quote:
Originally Posted by Rule3
It's miniature Rocket Science.
|
von Braun making an error could fry many to a crisp, an error here could cost an eye or a couple fingers..
If I misspell it's 'cause I type with my 4 remaining fingers..
|
The Following User Likes This Post:
|
|
09-18-2018, 05:53 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by Nevada Ed
If you like Unique powder for the 380 case..............
A 124gr JHP at a OAL of 1.075" in a 9mm case
( example only )
will take a compressed load of Unique at say, 4.5 grs....... +/-.
If you switch to BE-86 powder...........
a full load will be around 5.8 grs +/-.
BE-86 is the way to go with small case ammo, if you can find it.
BE-86 max load gave me 1220fps and w231 gave me 1166fps
out of a 5" 9mm barrel.
Just a heads up.
Safe loading.
|
BE-86 is a good call. I loaded about a pound of 86 earlier this year for a 9mm load , just to try it out. It was good , I had been using Power Pistol and went back to that when the BE 86 ran out. Good call . Unique tends to fill the case rather quickly . A 4 grain charge of Unique just about leaves room for the projectile in a .380 case.
I might see if I can find some more of that .
Mail-order powder is a hassle , what with hazmat and shipping .
Not a lot of choices for powder shopping in my local.
|
09-18-2018, 05:56 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by bigggbbruce
von Braun making an error could fry many to a crisp, an error here could cost an eye or a couple fingers..
If I misspell it's 'cause I type with my 4 remaining fingers..
|
I don't plan on pushing the load at all.
Just getting the pistoletta to cycle.
|
09-18-2018, 06:39 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Where this month?
Posts: 3,604
Likes: 264
Liked 4,215 Times in 1,714 Posts
|
|
I read where this guy was trying to load 45 Colt to 44Mag velocities. This is how he shoots now..
|
09-18-2018, 09:47 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by bigggbbruce
I read where this guy was trying to load 45 Colt to 44Mag velocities. This is how he shoots now..
YouTube
|
Your just trying to help
|
09-20-2018, 11:18 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Yep, to follow up.
I loaded groups of 5.
Unique under a 95 gr. FMJRN
Up from 3.2 to in 2 gr. intervals up to 4.2.
Everything starting with 3.4 cycled the pistol.
The sweet spot for accuracy with the FMJRN was in the 3.6 to 3.8 range.
Everything on paper at 25 yards.
Except the couple I shot at 3.2 which didn't cycle , I guess they made the backstop all right but I wasn't on my 25 yard slow fire target .
So that settles that hash.
The surprise of the evening was in shooting some 100gr plated Berrys , over 3.6 gr of BE86 at .974 OAL. I had loaded that up for an import Makarov I own thats chambered in .380.
The Pico Pistoletta was grouping with the plated rounds and the BE 86, so that might be my practice round right there.
I stopped loading that round when I found that 3 gr of Unique got the Makarov shooting well, although in fact I think I could bump that up to 3.4 and get a bit better performance.
I also was shooting my CZ 83 this evening and with 3gr of Unique that pistol with stay in the black at 25 yards all night if you stick with a jacketed projectile.
Very glad for the performance of the Pico with the BE86 and the plated projectiles.
Cheers
|
10-10-2018, 10:46 PM
|
Member
|
|
|
Join Date: Dec 2011
Location: SW Missouri
Posts: 2,630
Likes: 336
Liked 3,280 Times in 1,357 Posts
|
|
Quote:
Originally Posted by S&W forever
You're going to work this one backward. You have a load the works the slide. Now you going to go backwards. Start cutting back on the Powder till you get one the works. add 1/4 gram more to play it safe and that's your range ammo. I know you know this one. Never use reloads for SD ammo.
Rick
|
I think you mean "1/4 GRAIN".
There is nothing wrong with using reliable reloads for SD.
That business of reloads getting you in trouble with the justice system in SD cases is about 99.5% bogus.
It's one of those fables that gets repeated so many times that it becomes gospel, but no one seems to know of more than a couple of cases of it actually being an issue unless the reloader has loaded something that looks rather bizarre to most people.
If the shooting occurs in a jurisdiction that is so gun unfriendly that the prosecutor can send you to prison because of your ammo, you are probably already toast for shooting someone for any reason at all in the first place
|
The Following User Likes This Post:
|
|
10-10-2018, 10:57 PM
|
Member
|
|
|
Join Date: Jun 2017
Location: North East
Posts: 320
Likes: 294
Liked 144 Times in 93 Posts
|
|
Quote:
Originally Posted by smoothshooter
I think you mean "1/4 GRAIN".
There is nothing wrong with using reliable reloads for SD.
That business of reloads getting you in trouble with the justice system in SD cases is about 99.5% bogus.
It's one of those fables that gets repeated so many times that it becomes gospel, but no one seems to know of more than a couple of cases of it actually being an issue unless the reloader has loaded something that looks rather bizarre to most people.
If the shooting occurs in a jurisdiction that is so gun unfriendly that the prosecutor can send you to prison because of your ammo, you are probably already toast for shooting someone for any reason at all in the first place
|
An interesting point regarding the hand loads. In my state its said that we are prohibited from using HP ammo for SD. Its OK for target shooting but you can get in hot water if you use it for SD. Or so I was taught .
My plan is to stick with LRN which should take care of over penetration concerns and the states HP ordinance .
I'm going to have to read up on local laws.
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|