Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Closed Thread
 
Thread Tools Display Modes
  #1  
Old 01-12-2020, 04:55 PM
Daniel Howe's Avatar
Daniel Howe Daniel Howe is offline
US Veteran
Absent Comrade
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Mar 2019
Location: Marshall, MI
Posts: 512
Likes: 778
Liked 961 Times in 267 Posts
Post .45acp +P looking for load data

My go to load for the .45 is 7.5 grains HS6 and a 230 grain XTP hollow point.

I'm almost out of powder and brass so I'm thinking about stepping up to a +P load with new brass and a cleaner burning powder. Any of you folks have some pointers for me?

Lining up work for my new bench
__________________
Daniel
SWHF 616
The Following User Likes This Post:
  #2  
Old 01-12-2020, 05:37 PM
Ivan the Butcher Ivan the Butcher is online now
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,353
Likes: 23,195
Liked 26,152 Times in 9,068 Posts
Default

Look at 185 or 200 grain bullets and Blue Dot by Aliant. I loaded a few hundred in the late 80's and just can't bring my self to shoot them in my beloved 1911's! Accuracy is outstanding! But 45 ACP will already kill anything I can come across, how dead does it need to be? Dead? Double Dead? or Super Duper Special Dead?

Ivan
The Following 6 Users Like Post:
  #3  
Old 01-12-2020, 06:47 PM
cowboy4evr cowboy4evr is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 2,738
Likes: 185
Liked 3,297 Times in 1,523 Posts
Default

Accurate Powder / Ramshot powder co lists 45acp +P load data . Regards, Paul
The Following 3 Users Like Post:
  #4  
Old 01-12-2020, 06:51 PM
Univibe Univibe is offline
Banned
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Nov 2018
Location: TX
Posts: 1,480
Likes: 10
Liked 2,151 Times in 854 Posts
Default

I'd skip +P in .45 ACP. More pressure, slide goes faster, more gun wear for zero measurable gain. Little margin for error. Stick with John Moses Browning's specs and you can't go wrong.
  #5  
Old 01-12-2020, 09:14 PM
muddocktor's Avatar
muddocktor muddocktor is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Oct 2014
Location: South Louisiana
Posts: 5,346
Likes: 11,606
Liked 9,018 Times in 3,192 Posts
Default

Yep, I would agree with just loading to regular 45 ACP specs and not +P, as it's just not needed and beats your gun up. Load to around 900 ft/sec and you should be good to go.

If you want hotter, you can get there without going +P. I had bought some Shooter's World powders when Midsouth had a free hazmat with the purchase of SW powders and I had bought some Ultimate Pistol and Auto Pistol. Both work very well in 45 ACP too and it meters great also, much like Accurate powders. Data is a bit scarce, but Shooter's World does have some so you aren't totally in the blind. I loaded up a box of pretty much max non +P loads of Auto Pistol and out of my ACW 1911 (5" bbl), 16 shots averaged 999 ft/sec, 34 ES and 9 SD, shooting Zero 230 grain FMJ bullets. That was pretty much as hot as anything I would want to run through a stock 1911 pistol I think and I wouldn't even give it a steady diet of those either. That was more an "exploring the performance of the powder" type load and it wasn't the first loads I had done with that powder in 45 ACP either.

As for different powders to try, I've found that 45 ACP isn't a picky round to load. I've had good luck with Accurate #5 and #2, SW Clean Shot, Ultimate Pistol and Auto Pistol, CFE-P, Longshot, Power Pistol, BE-86, and probably others that don't pop into my head immediately.
The Following User Likes This Post:
  #6  
Old 01-12-2020, 09:35 PM
Struckat's Avatar
Struckat Struckat is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2017
Location: Illinois
Posts: 240
Likes: 802
Liked 510 Times in 155 Posts
Default

Is there an actual SAMMI spec for 45 +P?

I run 7gr of Unique, no signs of pressure in my guns, seems hot. I doubt it’s hitting 1000 FPS.
The Following 4 Users Like Post:
  #7  
Old 01-12-2020, 10:38 PM
muddocktor's Avatar
muddocktor muddocktor is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Oct 2014
Location: South Louisiana
Posts: 5,346
Likes: 11,606
Liked 9,018 Times in 3,192 Posts
Default

Quote:
Originally Posted by Struckat View Post
Is there an actual SAMMI spec for 45 +P?

I run 7gr of Unique, no signs of pressure in my guns, seems hot. I doubt it’s hitting 1000 FPS.
According to Wikipedia, there is a SAAMI +P rating for the 45 ACP. Normal 45 is 21,000 psi and the +P is rated to 23,000 psi.
The Following User Likes This Post:
  #8  
Old 01-12-2020, 11:13 PM
308 Scout 308 Scout is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2016
Location: North Texas
Posts: 111
Likes: 80
Liked 154 Times in 56 Posts
Default

Quote:
Originally Posted by Daniel Howe View Post
My go to load for the .45 is 7.5 grains HS6 and a 230 grain XTP hollow point.

I'm almost out of powder and brass so I'm thinking about stepping up to a +P load with new brass and a cleaner burning powder. Any of you folks have some pointers for me?

Lining up work for my new bench
I used Blue Dot for loading a 255 gr. cast SWC to almost 950 fps, very accurate load too. But Unique has been good to me as well. And, I completely support you in loading +P ammunition for your 45 ACP if that's what you want to do!
The Following 2 Users Like Post:
  #9  
Old 01-13-2020, 02:27 AM
Univibe Univibe is offline
Banned
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Nov 2018
Location: TX
Posts: 1,480
Likes: 10
Liked 2,151 Times in 854 Posts
Default

Yeow! 999 fps in 230 grains? I'd run it about 830 or so.
The Following User Likes This Post:
  #10  
Old 01-13-2020, 04:11 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,460
Likes: 5,857
Liked 9,262 Times in 3,478 Posts
Default

I like Blue Dot powder too but my first choice for a 45ACP (+P) load would be Power Pistol.

You'll have less unburnt residue than with B-D in what's still a low pressure load.

Loading for a revolver or pistol?

Sierra's reloading manual has plenty of (+P) & revolver loads.

.
__________________
Waiting for the break of day
The Following 4 Users Like Post:
  #11  
Old 01-13-2020, 10:41 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,837
Likes: 7,387
Liked 8,045 Times in 3,651 Posts
Default

Need some details ,
Pistol or revolver ... make and model .
Bullet weight , cast , coated, plated or jacketed .
Any powder preferences .

In handloading +P ammo ....the devil's in the details .
Gary
__________________
Certified Cajun
NRA Member
The Following User Likes This Post:
  #12  
Old 01-13-2020, 10:45 AM
muddocktor's Avatar
muddocktor muddocktor is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Oct 2014
Location: South Louisiana
Posts: 5,346
Likes: 11,606
Liked 9,018 Times in 3,192 Posts
Default

Quote:
Originally Posted by Univibe View Post
Yeow! 999 fps in 230 grains? I'd run it about 830 or so.
Yeah, I normally don't run that kind of load in my 1911 either. After chronoing those, I shot the rest of the box out of my 25-2. Let me tell ya, my ACW was really chunking those empty cases far.
  #13  
Old 01-13-2020, 10:58 AM
jim lock jim lock is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Sep 2009
Posts: 259
Likes: 76
Liked 236 Times in 103 Posts
Default

IMHO forget about the +p factor. Go with a hardball load 830fps is a shoot for load. You don't need to to beat up a gun with +p. Lastly remember --
Sight alignment, Sight picture and trigger control are the keyes.
Jim
The Following 2 Users Like Post:
  #14  
Old 01-13-2020, 12:31 PM
jag22 jag22 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2010
Location: Dallas
Posts: 701
Likes: 3
Liked 356 Times in 212 Posts
Default

It just sounds painful for no really good reason. I think there may be some psychiatric term for that but I don't know what it is.
  #15  
Old 01-13-2020, 12:47 PM
SixGunSancho SixGunSancho is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2019
Posts: 139
Likes: 140
Liked 152 Times in 66 Posts
Default

A box of +P .45 Ammo will last me longer than that rest of my life. I use it only when I'm fishing in mean critter county. For punching holes in paper and recyclables, I need only enough energy to cycle slides.
The Following User Likes This Post:
  #16  
Old 01-13-2020, 06:45 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,559
Likes: 3,037
Liked 22,450 Times in 5,824 Posts
Default

First off, I have no problems shooting 45ACP+P ammunition out of any Modern manufactured firearm that is chambered for the 45ACP and is in good mechanical condition.

I have put probably close to 10,000 rounds of factory loaded 45ACP+P through a single P220 over the decades and many more rounds through other various 45s. I absolutely see the benefit of more power due to some real-life incidents where a barrier needed to be breached before the projectile could impact a target

I have slightly less than a case of Winchester Ranger RA45TP remaining on hand for personal defensive ammunition. Ever 6 Months I shoot the ammunition in my carry firearms and replenish them with fresh rounds

All that said, I am in agreement with BLUEDOT37 that Power Pistol is one of the top powders for High Performance 45 caliber hand-loaded ammunition

While I do not hand-load the 45ACP cartridge to +P levels any longer, I do hand load 45SUPER brass to levels above 45ACP+P pressure for use in firearms that are appropriate to the cartridge.



I believe it was an older copy of the Accurate loading guide that gave me my first taste of +P loads for the 45ACP cartridge. I am referring to the large book that they sell, not the little pamphlet that they give away for free

Using Power pistol with a Winchester 230 grain JHP projectile I have chronographed just under 1100 FPS out of a 4.25" HK USPf. I have not chronographed that same load out of the Springfield LS, a 6" USP Match or a 6" USP Elite yet.

I shoot any and all of the 45 ACP, 45ACP+P and 45SUPER loads from my Model 625 Revolvers. It was the acquisition of my 625 V-Comp for shooting pins that really motivated me to seek more power.

The 45SUPER really helps the V-Comp do its thing while throwing pins of the table with Authority

__________________
"Acta non verba"

Last edited by colt_saa; 01-13-2020 at 06:50 PM.
The Following 6 Users Like Post:
  #17  
Old 01-13-2020, 07:33 PM
Gripgrabber's Avatar
Gripgrabber Gripgrabber is offline
US Veteran
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Oct 2014
Location: Brooksville, FL
Posts: 727
Likes: 4,447
Liked 991 Times in 372 Posts
Default

My old favorite load is from my IPSA days, 200gr sac 5.7 gr 231,180gr sac 6.5gr 231. Works for me.
Semper paratus
__________________
NRA Life Member
CPO
  #18  
Old 01-13-2020, 07:48 PM
mscampbell2734 mscampbell2734 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Jan 2012
Posts: 748
Likes: 32
Liked 813 Times in 343 Posts
Default

Alliant's webpage has a whole section for 45+P

Alliant Powder - Reloader's Guide

However given my own experience their data is conservative. My Department issued HST+P 230 gr for 2 years. Out of three different 5 inch guns I found the average vel to be 970 fps, almost exactly 100 fps faster then standard HST.

Last edited by mscampbell2734; 01-13-2020 at 07:50 PM.
  #19  
Old 01-13-2020, 09:36 PM
boatbum101 boatbum101 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 998 Times in 536 Posts
Default

If you're pushing a 230 FMJ around 1,000fps yu're already in +P territory . Blue Dot will get you there , but for these type loads I prefer VVN-340 or RS Silhouette . Both have anti-flash additives , something neither Blue Dot or Power Pistol have .
I cast a 200gr RNHP with a smaller cavity than the Lyman Devestator & use 30 to 1 alloy . Great expansion , no shed petals . I use it for 4 legged pests . Never tried it on the 2 legged variety .
  #20  
Old 01-14-2020, 11:39 AM
dla dla is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 468 Times in 278 Posts
Default

Quote:
Originally Posted by Daniel Howe View Post
My go to load for the .45 is 7.5 grains HS6 and a 230 grain XTP hollow point.

I'm almost out of powder and brass so I'm thinking about stepping up to a +P load with new brass and a cleaner burning powder. Any of you folks have some pointers for me?

Lining up work for my new bench
Back during the powder shortages I was forced to try new powders and discovered Silhouette -good stuff. I also used Longshot, but it is just a tad too slow unless you're serious about +p and above.
I always found HS6 to be a little too flashy, Silhouette is much less so.
The Following 2 Users Like Post:
  #21  
Old 01-14-2020, 01:56 PM
Rogeronimo Rogeronimo is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: May 2015
Location: Oklahoma City
Posts: 314
Likes: 68
Liked 109 Times in 85 Posts
Default

Quote:
Originally Posted by dla View Post
Back during the powder shortages I was forced to try new powders and discovered Silhouette -good stuff. I also used Longshot, but it is just a tad too slow unless you're serious about +p and above.
I always found HS6 to be a little too flashy, Silhouette is much less so.
Love Silhouette for 230 gn., Longshot for 250 gn.!
  #22  
Old 01-14-2020, 02:30 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,559
Likes: 3,037
Liked 22,450 Times in 5,824 Posts
Default

Quote:
Originally Posted by dla View Post
Back during the powder shortages I was forced to try new powders and discovered Silhouette -good stuff.
Silhouette used to go by the name of WAP from Winchester

WAP was the GoTo powder for the 9x23 Winchester cartridge. I used to go through lots of WAP

It has also been used for other 9MM Major power factor cartridges,
__________________
"Acta non verba"
  #23  
Old 01-15-2020, 03:23 PM
4barrel's Avatar
4barrel 4barrel is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Jan 2012
Location: OVER the hill in TEJAS
Posts: 2,725
Likes: 13,107
Liked 4,339 Times in 1,773 Posts
Default

Would a 460 Rowland drop in 1911 barrel kit from Clark Custom be a 45+p? The bullet is .45 and they use the same magazine.

Last edited by 4barrel; 01-15-2020 at 03:44 PM.
  #24  
Old 01-15-2020, 04:55 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,559
Likes: 3,037
Liked 22,450 Times in 5,824 Posts
Default

Quote:
Originally Posted by 4barrel View Post
Would a 460 Rowland drop in 1911 barrel kit from Clark Custom be a 45+p? The bullet is .45 and they use the same magazine.
That drop in the barrel kit also has a compensator on the front of it. You would be making that particular firearm an inch or so longer

The pressures of the 460 Rowland are well in excess of the 45ACP/45ACP+P

Even though the cartridge overall length allows it to be used in 45ACP magazines, the 460 Rowland is a longer cartridge case.

So if you fired a 45ACP+P in there, handling the pressure will be no big deal, but you would be headspacing on the extractor instead of having the case mouth against the end of the chamber. So you do run the risk of a light strike on the primer
__________________
"Acta non verba"
  #25  
Old 01-15-2020, 05:09 PM
gen3guy gen3guy is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: May 2013
Posts: 604
Likes: 21
Liked 660 Times in 284 Posts
Default

Quote:
Originally Posted by Univibe View Post
I'd skip +P in .45 ACP. More pressure, slide goes faster, more gun wear for zero measurable gain. Little margin for error. Stick with John Moses Browning's specs and you can't go wrong.
What this guy said.
The Following User Likes This Post:
  #26  
Old 01-15-2020, 07:01 PM
4barrel's Avatar
4barrel 4barrel is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Jan 2012
Location: OVER the hill in TEJAS
Posts: 2,725
Likes: 13,107
Liked 4,339 Times in 1,773 Posts
Default

Quote:
Originally Posted by colt_saa View Post
That drop in the barrel kit also has a compensator on the front of it. You would be making that particular firearm an inch or so longer

The pressures of the 460 Rowland are well in excess of the 45ACP/45ACP+P

Even though the cartridge overall length allows it to be used in 45ACP magazines, the 460 Rowland is a longer cartridge case.

So if you fired a 45ACP+P in there, handling the pressure will be no big deal, but you would be headspacing on the extractor instead of having the case mouth against the end of the chamber. So you do run the risk of a light strike on the primer
The brass is 1/8 longer so it will not fit in a standard 45acp but you seat the bullet the same as standard 45acp. I have a comp barrel in the pile if needed and was thinking you could make the chamber 1/8 deeper <Not sure how Clark does that-his kit is $400>-- and use the 460 brass to safely make a 1100 fps 45 acp+p load that wont fit another gun. I have the stuff but don't care about +p loads. All I care about is what it takes to make the tightest 10 shot group.
  #27  
Old 01-16-2020, 12:23 AM
308 Scout 308 Scout is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2016
Location: North Texas
Posts: 111
Likes: 80
Liked 154 Times in 56 Posts
Default

Quote:
Originally Posted by Univibe View Post
I'd skip +P in .45 ACP. More pressure, slide goes faster, more gun wear for zero measurable gain. Little margin for error. Stick with John Moses Browning's specs and you can't go wrong.
Hmm....what about those same pistols chambered in 9mm and 38 Super? About 50% higher pressures than 45 ACP +P, and talk about the slide going faster!
  #28  
Old 01-16-2020, 12:43 AM
Univibe Univibe is offline
Banned
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Nov 2018
Location: TX
Posts: 1,480
Likes: 10
Liked 2,151 Times in 854 Posts
Default

Quote:
Originally Posted by 308 Scout View Post
Hmm....what about those same pistols chambered in 9mm and 38 Super? About 50% higher pressures than 45 ACP +P, and talk about the slide going faster!
Okay, but there are several differences.

1. The bullet on the 9s is much lighter than that of the .45. About half the weight, means much less recoil impulse.

2. The chamber and barrel are the same external dimensions of the .45, so that means the walls are much thicker and will handle much higher pressures.

3. A useful comparison is the 1911 in .40. The .40 can be thought of as a type of .45 +P, since the bullet's only 50 grains different. There's a reason that Colt, Kimber et al dropped it not long after the introduction. It's too much mass and too much pressure for the 1911. Slide goes too fast and it can cause intractable problems. The design just won't handle it.

So the 1911 can handle 9mm +P and .38 super, but not (reliably) .40. I'd say the .45 +P is more like the .40 than it is the smaller calibers.

Again, I'd pass on .45 +P. You're asking Browning's gun to do something it wasn't designed to do.

Last edited by Univibe; 01-16-2020 at 12:45 AM.
  #29  
Old 01-16-2020, 12:50 AM
308 Scout 308 Scout is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2016
Location: North Texas
Posts: 111
Likes: 80
Liked 154 Times in 56 Posts
Default

Quote:
Originally Posted by Univibe View Post
Okay, but there are several differences.

1. The bullet on the 9s is much lighter than that of the .45. About half the weight, means much less recoil impulse.

2. The chamber and barrel are the same external dimensions of the .45, so that means the walls are much thicker and will handle much higher pressures.

3. A useful comparison is the 1911 in .40. The .40 can be thought of as a type of .45 +P, since the bullet's only 50 grains different. There's a reason that Colt, Kimber et al dropped it not long after the introduction. It's too much mass and too much pressure for the 1911. Slide goes too fast and it can cause intractable problems. The design just won't handle it.

So the 1911 can handle 9mm +P and .38 super, but not (reliably) .40. I'd say the .45 +P is more like the .40 than it is the smaller calibers.

Again, I'd pass on .45 +P. You're asking Browning's gun to do something it wasn't designed to do.
You forgot the 10mm, which both Colt and Kimber chamber. How is it the 40 S&W and 45 ACP +P too much for the 1911, but the 10mm isn't?

I mean if you have some sort of information, I'm all ears!
The Following 4 Users Like Post:
  #30  
Old 01-16-2020, 09:51 PM
dla dla is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Feb 2010
Posts: 1,100
Likes: 326
Liked 468 Times in 278 Posts
Default

Quote:
Originally Posted by Univibe View Post
Okay, but there are several differences.

1. The bullet on the 9s is much lighter than that of the .45. About half the weight, means much less recoil impulse.

2. The chamber and barrel are the same external dimensions of the .45, so that means the walls are much thicker and will handle much higher pressures.

3. A useful comparison is the 1911 in .40. The .40 can be thought of as a type of .45 +P, since the bullet's only 50 grains different. There's a reason that Colt, Kimber et al dropped it not long after the introduction. It's too much mass and too much pressure for the 1911. Slide goes too fast and it can cause intractable problems. The design just won't handle it.

So the 1911 can handle 9mm +P and .38 super, but not (reliably) .40. I'd say the .45 +P is more like the .40 than it is the smaller calibers.

Again, I'd pass on .45 +P. You're asking Browning's gun to do something it wasn't designed to do.
Pressure doesn't move the slide.
+p is no big deal - in fact I dont know why they bother with that silly 19Kpsi anymore.

I shoot +p constantly - 185gr @1100fps. If I wanted a bear load, I would have no qualms about a 230gr at 1000+fps. In fact, Ramshot used to publish a recipe using Enforcer that took a 230gr above 1000fps and stayed below +p.
The Following User Likes This Post:
  #31  
Old 01-16-2020, 09:58 PM
308 Scout 308 Scout is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2016
Location: North Texas
Posts: 111
Likes: 80
Liked 154 Times in 56 Posts
Default

Quote:
Originally Posted by dla View Post
Pressure doesn't move the slide.
+p is no big deal - in fact I dont know why they bother with that silly 19Kpsi anymore.

I shoot +p constantly - 185gr @1100fps. If I wanted a bear load, I would have no qualms about a 230gr at 1000+fps. In fact, Ramshot used to publish a recipe using Enforcer that took a 230gr above 1000fps and stayed below +p.
Almost 1,000 fps and just a smidge over standard pressure.

The Following User Likes This Post:
  #32  
Old 01-16-2020, 11:57 PM
Univibe Univibe is offline
Banned
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Nov 2018
Location: TX
Posts: 1,480
Likes: 10
Liked 2,151 Times in 854 Posts
Default

Quote:
Originally Posted by 308 Scout View Post
You forgot the 10mm, which both Colt and Kimber chamber. How is it the 40 S&W and 45 ACP +P too much for the 1911, but the 10mm isn't?

I mean if you have some sort of information, I'm all ears!
I've shot the Springfield 1911 in 10mm. The frame is beefed up, the slide seems heavier than a govt 1911, and the recoil spring is much tougher. The chamber is fully supported. It's essentially a 1911 on weight training.

Similarly, the .40 Browning hi-power had a heavier slide and a much stiffer recoil spring.

By contrast, the Kimber and Colt 40's were merely 1911s chambered in .40.

I have shot and examined all these guns and their counterparts in original chambering.
  #33  
Old 01-19-2020, 09:41 PM
Qc Pistolero Qc Pistolero is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: May 2016
Location: 30min SE Montreal
Posts: 2,026
Likes: 150
Liked 1,540 Times in 841 Posts
Default

Quote:
Originally Posted by gen3guy View Post
What this guy said.
I agree with what this guy said about what this guy said.
The Following User Likes This Post:
  #34  
Old 01-29-2020, 08:43 PM
Tex1001's Avatar
Tex1001 Tex1001 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Mar 2011
Location: North Texas prairie
Posts: 1,185
Likes: 2,521
Liked 2,094 Times in 661 Posts
Default

For my infrequent 45ACP +P 230gr loads I too load 45 Super cases. Longshot works well for loads for my modern revolver.
Silhouette (WAP) works well for 1911 and M&P loads, but I keep a very close watch on slide velocity.
I use Hornady web site data for both.
__________________
I'm with her

Last edited by Tex1001; 02-16-2020 at 10:03 AM.
  #35  
Old 01-30-2020, 03:34 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,460
Likes: 5,857
Liked 9,262 Times in 3,478 Posts
Default

If you're using Hodgdon's website's load data for Longshot & 45 ACP +P loads you have to go to the 45 Super section & then that's barely over standard 45 ACP pressure (18K CUP).

Their 230gr Longshot 45 SUPER load is 19.8K CUP, definitely not a true 45 SUPER load, but would qualify as 45 ACP (+P) if SAAMI defined one using CUP (only defined using PSI).

No need to use 45 SUPER brass for (+P) loads useless you have poorly supported chambers.

I shoot real 45 SUPER loads (45 ACP +P+) in several of my 3rd Gens, & revolvers as well as my Series 70 1911 set-up for these. No idea why (+P) would be too much for a 1911.

The OP never did tell us what he's loading for.

.
__________________
Waiting for the break of day

Last edited by BLUEDOT37; 01-30-2020 at 03:36 AM. Reason: .
  #36  
Old 01-30-2020, 10:46 AM
reddog81 reddog81 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Sep 2014
Location: IA
Posts: 1,716
Likes: 973
Liked 1,619 Times in 794 Posts
Default

Quote:
Originally Posted by Univibe View Post
Okay, but there are several differences.
...
3. A useful comparison is the 1911 in .40. The .40 can be thought of as a type of .45 +P, since the bullet's only 50 grains different. There's a reason that Colt, Kimber et al dropped it not long after the introduction. It's too much mass and too much pressure for the 1911. Slide goes too fast and it can cause intractable problems. The design just won't handle it.

So the 1911 can handle 9mm +P and .38 super, but not (reliably) .40. I'd say the .45 +P is more like the .40 than it is the smaller calibers.

Again, I'd pass on .45 +P. You're asking Browning's gun to do something it wasn't designed to do.
That's some of the craziest stuff I've heard in a while. The 45 ACP will push a 180 grain bullet to around 950 to 1000 FPS. A 40 S&W will push a 180 grain bullet to about 950 to 1000 FPS. Boutique ammo will push bullets faster for both rounds.

I have 6 1911s. The Colt Delta Elite is the lightweight of the bunch. I just weighed all of them and the DE weighs in at 2 lbs 3 ounces. All the others weigh more - from 2 lbs 4 ounces up to 2 lbs 7 ounces. Where is the slide and frame beefier on the 10MM? I'm not seeing it.

The Delta Elite does have a double recoil spring but that's more for marketing than anything else. The recoil springs main job is to load the next round from the magazine. The mainspring and firing pin stop have a much more pronounced effect on retarding the speed of the slide.

Sure +P will increase wear slightly, but you'll have spent many $1,000's on ammo before you'd ever see any difference in wear.

Last edited by reddog81; 01-30-2020 at 11:01 AM.
  #37  
Old 02-14-2020, 12:49 AM
papajohn428's Avatar
papajohn428 papajohn428 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: May 2004
Location: Coastal Missouri
Posts: 1,898
Likes: 899
Liked 977 Times in 467 Posts
Default

Interesting thread! I've experimented with the 460 Rowland in years past, still have a lot of the brass on hand, plus several assorted boxes of handloads. But my recent forays into the .452" family have led me to purchase another 625-3, as well as some Starline 45 Auto Rim brass for it. I've long heard that 45ACP power levels can be boosted safety in this modern gun, and as it happens, I also recently bought a Ruger Blackhawk Convertible in 45ACP/45 Long Colt, so I have two VERY strong platforms to experiment with when it comes to launching 45ACP boolits.

Anyone else experimented with hot 45 Auto Rim loads? I'm thinking with new brass I can safely approach 24-26,000 PSI loads, possibly even higher, in a pair of guns designed to take a lot more pressure than that.

What say the form folk? Any daredevils here? ;-)
  #38  
Old 02-14-2020, 01:03 AM
308 Scout 308 Scout is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2016
Location: North Texas
Posts: 111
Likes: 80
Liked 154 Times in 56 Posts
Default

Quote:
Originally Posted by papajohn428 View Post
Interesting thread! I've experimented with the 460 Rowland in years past, still have a lot of the brass on hand, plus several assorted boxes of handloads. But my recent forays into the .452" family have led me to purchase another 625-3, as well as some Starline 45 Auto Rim brass for it. I've long heard that 45ACP power levels can be boosted safety in this modern gun, and as it happens, I also recently bought a Ruger Blackhawk Convertible in 45ACP/45 Long Colt, so I have two VERY strong platforms to experiment with when it comes to launching 45ACP boolits.

Anyone else experimented with hot 45 Auto Rim loads? I'm thinking with new brass I can safely approach 24-26,000 PSI loads, possibly even higher, in a pair of guns designed to take a lot more pressure than that.

What say the form folk? Any daredevils here? ;-)
I'm not sure what you call "hot" but I do have one 45 AR load I use in my S&W 1917 that runs a 255 gr. cast SWC 925 fps.
The Following User Likes This Post:
  #39  
Old 02-14-2020, 02:45 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,460
Likes: 5,857
Liked 9,262 Times in 3,478 Posts
Default

Quote:
Originally Posted by papajohn428 View Post
Anyone else experimented with hot 45 Auto Rim loads?
I'm thinking with new brass I can safely approach 24-26,000 PSI loads, possibly even higher...
No problem uploading Starline 45 Auto Rim brass, they are plenty strong. I load them to 45 Super power without issues.

Starline website says "The .45 Auto Rim... It is built with the same integrity as our 45 Colt case."

Their 45 Colt brass is good to 44 Magnum pressure.

.
__________________
Waiting for the break of day

Last edited by BLUEDOT37; 02-14-2020 at 02:53 AM. Reason: .
The Following 3 Users Like Post:
  #40  
Old 03-09-2020, 07:04 AM
Ray Ray is offline
Member
 
Join Date: Mar 2005
Location: Lost in South America
Posts: 693
Likes: 189
Liked 1,120 Times in 370 Posts
Default

Just taking a ride here. Maybe itīs not advisable , but will a SW 1917 revolver safely digests a VERY limited diet of a 185 grain +P .45 ACP load without ill effects?
The brand is Magtech, ( here in Brazil CBC ) and the load is a +P with a 185 grain hollow point bullet.
I just saw it for sale around here in Rio de Janeiro and want to try it, but only if itīs safe.
Donīt want to push the old gal too much.
Thanks, regards, Ray
  #41  
Old 03-09-2020, 08:54 AM
mikerjf mikerjf is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Sep 2018
Posts: 1,857
Likes: 2,232
Liked 2,928 Times in 1,089 Posts
Default

I found this Shooting Times article interesting, about a particular Ramshot Enforcer load. I’m just a newbie loader, but seems worth a try.

45 ACP Fast Loads
  #42  
Old 03-09-2020, 08:56 AM
308 Scout 308 Scout is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2016
Location: North Texas
Posts: 111
Likes: 80
Liked 154 Times in 56 Posts
Default

According to an article by Brian Pearce in the February 2017 Handloader Magazine there are no "weak" 45 ACP's. I can't imagine how a few 185 gr. +P's would harm your revolver.
Follow the provided link and you can read the entire article.

308S
  #43  
Old 03-09-2020, 09:08 AM
Ivan the Butcher Ivan the Butcher is online now
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,353
Likes: 23,195
Liked 26,152 Times in 9,068 Posts
Default

Quote:
Originally Posted by Ray View Post
Just taking a ride here. Maybe itīs not advisable , but will a SW 1917 revolver safely digests a VERY limited diet of a 185 grain +P .45 ACP load without ill effects?
The brand is Magtech, ( here in Brazil CBC ) and the load is a +P with a 185 grain hollow point bullet.
I just saw it for sale around here in Rio de Janeiro and want to try it, but only if itīs safe.
Donīt want to push the old gal too much.
Thanks, regards, Ray
I'm thinking the 1937 Brazilian Contract have the post '35 heat treatment. The 1946/7 Contract has lots of frames and parts from before '35.

Ivan
  #44  
Old 03-09-2020, 02:55 PM
Ray Ray is offline
Member
 
Join Date: Mar 2005
Location: Lost in South America
Posts: 693
Likes: 189
Liked 1,120 Times in 370 Posts
Default

Mine is from the 1946 batch and made in 1919. As for the cylinder I donīt know. Maybe itīs from 1919 also or post 35, I think iīll never know for sure. Thanks Scout 308 I saved Mr Pearceīs article
Thanks to all, Regards, Ray

Last edited by Ray; 03-09-2020 at 03:24 PM.
The Following User Likes This Post:
  #45  
Old 03-10-2020, 01:20 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,460
Likes: 5,857
Liked 9,262 Times in 3,478 Posts
Default

Quote:
Originally Posted by mikerjf View Post
I found this Shooting Times article interesting, about a particular Ramshot Enforcer load. I’m just a newbie loader, but seems worth a try.
Pretty slow powder for a 45ACP. I've never used Ramshot for anything else so I wouldn't buy a can just to try it for this.

But when I was trying different powders for 45 Super loads I tried some 2400, an old magnum powder favorite, in some loads.

On the charts 2400 is slightly faster than Ramshot. In my loads, that were a little heavier than the listed Ramshot loads, I got poor results cycling the action.

My Colt 1911 was already setup for 45 Super loads using moderate speed powders & the slow powder didn't have the grunt for it.

I'm sure I could have made a spring change but I think powders like Power Pistol & Long Shot are better suited for (+)P loads & above in the 45ACP.

Accurate #7 might be one to play with next time though?

.
__________________
Waiting for the break of day

Last edited by BLUEDOT37; 03-14-2020 at 01:10 AM.
  #46  
Old 03-10-2020, 03:00 PM
Imissedagain's Avatar
Imissedagain Imissedagain is offline
US Veteran
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Jun 2012
Location: South Florida
Posts: 2,440
Likes: 3,455
Liked 4,165 Times in 1,869 Posts
Default

When my Unique loads we're making my Colt GM ring like the Church bells in Notre-Dame, I bought a bullet puller.
Blackhawk convertible.
The Following User Likes This Post:
  #47  
Old 03-13-2020, 05:55 AM
Johnnn01 Johnnn01 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Sep 2014
Location: USA
Posts: 63
Likes: 3
Liked 14 Times in 9 Posts
Default

colt_saa
Quote:
Using Power pistol with a Winchester 230 grain JHP projectile I have chronographed just under 1100 FPS out of a 4.25" HK USPf.
How many grains of Power pistol did you use?

I just picked up a HK USP 45, and I plan on loading some 200 grain 45 super rounds with Longshot and Power pistol.

Also thinking about picking up a 6 inch ported barrel, I want to hit 1200 fps with the 200 grain and see how the recoil is.
The USP is going to be my woods gun.
  #48  
Old 03-13-2020, 09:12 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,837
Likes: 7,387
Liked 8,045 Times in 3,651 Posts
Default

Hornady Handbook #8 shows : 45 ACP
230 grain HP-XTP
col 1.230"
Powder : Power Pistol

Starting Load - 5.5 grs. Power Pistol @ 700 fps
Maximum load - 7.1 grs. Power Pistol @ 900 fps

Start low and slowly work up to maximum load in your pistol .

Power Pistol is a good powder for max. loads in the 45 acp .
Gary
__________________
Certified Cajun
NRA Member
  #49  
Old 03-13-2020, 01:42 PM
colt_saa's Avatar
colt_saa colt_saa is offline
SWCA Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,559
Likes: 3,037
Liked 22,450 Times in 5,824 Posts
Default

Quote:
Originally Posted by Johnnn01 View Post
colt_saa


How many grains of Power pistol did you use?

I just picked up a HK USP 45, and I plan on loading some 200 grain 45 super rounds with Longshot and Power pistol.

Also thinking about picking up a 6 inch ported barrel, I want to hit 1200 fps with the 200 grain and see how the recoil is.
The USP is going to be my woods gun.
I was running 9.5 grains of PP for that load. Winchester large pistol primers, Winchester 230 JHP projectile all loaded into Starling cases
__________________
"Acta non verba"
  #50  
Old 03-14-2020, 01:50 AM
BLUEDOT37's Avatar
BLUEDOT37 BLUEDOT37 is offline
Member
.45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data .45acp +P looking for load data  
Join Date: Dec 2012
Location: N.E. OKLA.
Posts: 6,460
Likes: 5,857
Liked 9,262 Times in 3,478 Posts
Default 45 Super, 200gr XTP

Quote:
Originally Posted by Johnnn01 View Post
...I plan on loading some 200 grain 45 super rounds with Longshot and Power pistol.
...I want to hit 1200 fps with the 200 grain
Back when I started working up loads in my Colt Series 70 Mk.IV 1911, prepped for 45 Super, I set 10.4gr/Power Pistol as it's max load using a HDY 200gr XTP bullet, CCI-300 primer & 1.200" COAL in S-L 45 Super cases.

FWIW, QuickLoad calculates this at 1211mv & 652me @ 26.8K psi from a 5" bbl. (Pressure drops to 25.0K psi & mv to 1190 with a 1.220" COAL.)

This was backed down from 10.8gr/P-P because the unsupported chamber's mouth would bulge cases.

I use this in my 4506 & 4586 as well even though their fully supported chambers are good for more. I like the way the S&Ws handle the recoil (feel) better than the 1911.

Work-up slow & use at your own risk.

.
__________________
Waiting for the break of day
The Following User Likes This Post:
Closed Thread

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WST Load Data .38 Special / .45acp mmesa005 Reloading 7 06-29-2013 03:49 PM
New at Reloading - need 45acp load data mmesa005 Reloading 46 05-06-2013 02:47 PM
.45ACP load data Dmaxboy08 Reloading 18 06-16-2012 09:25 PM
625 .45ACP W231 load data.? PLINKING.40 Reloading 24 05-28-2011 10:19 PM
Load data for GI 45ACP ball ammo kci-mia Reloading 11 02-18-2011 06:12 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:12 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)