Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 05-14-2020, 09:53 PM
oldiegoldie oldiegoldie is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Oct 2015
Posts: 583
Likes: 2,761
Liked 579 Times in 293 Posts
Default powder for .380

am new to reloading [loaded for rifle 60 yrs ago] and need a reliable, fool proof, safe powder. using 100 gr Berry's bullets and Federal small pistol primers. will be range ammo. appreciate any suggestions.
Reply With Quote
  #2  
Old 05-14-2020, 10:01 PM
rockquarry rockquarry is offline
Member
 
Join Date: Aug 2005
Posts: 7,553
Likes: 4
Liked 8,885 Times in 4,121 Posts
Default

I haven't loaded for .380 in a good while, but tried several powders with cast bullet weights of from around 90 grs. to 120 grains. Powders included Bullseye, 231, Unique, Blue Dot, Herco, and maybe another. Probably the best overall was 231, with Bullseye as a second.

I'd recommend a Lyman manual.
Reply With Quote
The Following 2 Users Like Post:
  #3  
Old 05-14-2020, 10:12 PM
Funflyer's Avatar
Funflyer Funflyer is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Sep 2016
Location: Central Arizona
Posts: 1,031
Likes: 1,096
Liked 1,742 Times in 585 Posts
Default

Titegroup is my favorite 380 powder for 102gn and 105gn range loads. I recently started testing Sport Pistol with the same and so far it is working just as well. For hotrod 90 & 95 grain loads I only use CFE Pistol or Autocomp.
Reply With Quote
  #4  
Old 05-14-2020, 10:13 PM
rg1 rg1 is offline
Member
 
Join Date: Oct 2008
Posts: 133
Likes: 1
Liked 59 Times in 41 Posts
Default

Best powder I've loaded by far has been Accurate Arms #2. Gives most consistent velocities of all. Need faster burning powders. I even think Unique is too slow. Especially do not use any powders slower than Unique.
Reply With Quote
  #5  
Old 05-14-2020, 10:17 PM
jkmo jkmo is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Feb 2006
Location: Troy, IL
Posts: 492
Likes: 377
Liked 312 Times in 130 Posts
Default

Have loaded and shot close to 1000 in a 380 E Z. 100 grain Hollow base Berry plated bullet over 3 grains of 231. Wifey shoots it well also
Reply With Quote
  #6  
Old 05-14-2020, 10:25 PM
OKFC05 OKFC05 is offline
Member
powder for .380 powder for .380  
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,158
Likes: 3,605
Liked 5,199 Times in 2,172 Posts
Default

HP38 (231) is old standby; titegroup is new favorite, especially for standard loads.

Lived on Parkview in Troy ,IL while stationed at Scott. Nice place to live, restful drive to work. Raised fantastic vegetable garden. (note to jkmo)
__________________
Science plus Art
Reply With Quote
The Following 2 Users Like Post:
  #7  
Old 05-14-2020, 11:13 PM
alwslate alwslate is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Dec 2009
Location: Indiana
Posts: 6,606
Likes: 3,693
Liked 7,175 Times in 2,997 Posts
Default

I don't load the .380 but from what I see in the loading manuals 231
seems to be ideal.
Reply With Quote
  #8  
Old 05-15-2020, 12:01 AM
GyMac GyMac is offline
US Veteran
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Jun 2009
Location: SW Washington
Posts: 1,107
Likes: 616
Liked 288 Times in 168 Posts
Default

231/HP-38 is what I use, but it’s because that’s what I use for my other cartridges that I reload. It’s worked fine for over 7000 rounds in my .380 Makarov.
Reply With Quote
  #9  
Old 05-15-2020, 12:01 AM
Rogeronimo Rogeronimo is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: May 2015
Location: Oklahoma City
Posts: 314
Likes: 68
Liked 109 Times in 85 Posts
Default

Green Dot, Int'l Clays.
Reply With Quote
  #10  
Old 05-15-2020, 01:09 AM
DWalt's Avatar
DWalt DWalt is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,948 Times in 14,015 Posts
Default

Any of the faster propellants will work OK for the .380, but with the Berry bullets, I always use Unique.
Reply With Quote
The Following User Likes This Post:
  #11  
Old 05-15-2020, 07:50 AM
kbm6893 kbm6893 is offline
SWCA Member
powder for .380 powder for .380  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,625
Likes: 636
Liked 6,861 Times in 2,541 Posts
Default

Quote:
Originally Posted by OKFC05 View Post
HP38 (231) is old standby; titegroup is new favorite, especially for standard loads.

Lived on Parkview in Troy ,IL while stationed at Scott. Nice place to live, restful drive to work. Raised fantastic vegetable garden. (note to jkmo)
HP38 is the only powder I use for handguns. Meters dead on every time. I’ve only been loading for 7 years and I don’t pay attention to burn rates or FPS. Just looking to make safe and reasonably accurate loads and HP38 does that for every handgun caliber I own. I don’t want to deal with mixing up powders either. I think I use 3.0 grains but I’d have to check.
Reply With Quote
  #12  
Old 05-15-2020, 07:59 AM
TjB101 TjB101 is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Mar 2017
Posts: 141
Likes: 7
Liked 80 Times in 53 Posts
Default

Titegroup and Bullseye ... both meter well and consistent charges is required for such a small case. 2.8gr TG worked great in my P238
Reply With Quote
The Following User Likes This Post:
  #13  
Old 05-15-2020, 08:32 AM
cowboy4evr cowboy4evr is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Jun 2016
Location: for now ,Texas
Posts: 2,738
Likes: 185
Liked 3,297 Times in 1,523 Posts
Default

I reload the 380 using Berry's 100 gr plated bullets in a Sig P238 . I use Ramshot True Blue powder . They (Ramshot) list the load data . It meters like water . Regards Paul
Reply With Quote
  #14  
Old 05-15-2020, 12:54 PM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

W231 (HP-38) works very well.
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
  #15  
Old 05-15-2020, 07:17 PM
oldiegoldie oldiegoldie is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Oct 2015
Posts: 583
Likes: 2,761
Liked 579 Times in 293 Posts
Default

i've got a good sized list to take to the gunshops....appreciate every suggestion. we seem to have plenty of powder, but i'll know more about the selection tomorrow.

again, thanks...
Reply With Quote
  #16  
Old 05-15-2020, 08:00 PM
GeoJelly GeoJelly is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Oct 2000
Location: NOVA
Posts: 1,381
Likes: 5,581
Liked 1,379 Times in 579 Posts
Default

I guess I am the real outlier here since I use Power Pistol with 100-g plated bullets. I picked PP since the Hornady manual I use (9th edition) had a wide range of charges for PP using a 100-g jacketed bullet. I've fired those loads in a SIG P238, Glock 42 and CZ-83 with zero issues. That said, my biggest concern with .380 (and 9mm too) is avoiding bullet setback during feeding. So, I put a strong taper crimp on my .380 loads.
Reply With Quote
The Following User Likes This Post:
  #17  
Old 05-15-2020, 08:32 PM
buckshotshorty's Avatar
buckshotshorty buckshotshorty is offline
Member
 
Join Date: Jul 2009
Posts: 379
Likes: 86
Liked 298 Times in 132 Posts
Default

I’ve loaded thousands with Titegroup And Xtreme 100 gr.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 05-15-2020, 09:10 PM
38SPL HV's Avatar
38SPL HV 38SPL HV is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Apr 2016
Location: Northern Nevada
Posts: 1,186
Likes: 957
Liked 949 Times in 419 Posts
Default

When I had a 380 ACP (moons ago) I used WW231.
Reply With Quote
  #19  
Old 05-15-2020, 09:13 PM
growr growr is offline
Member
 
Join Date: Nov 2006
Location: Montana
Posts: 5,162
Likes: 3,433
Liked 6,245 Times in 2,061 Posts
Default

Fired thousands of .380 acp with Unique and had great results. Might work well for you as well.

Randy
Reply With Quote
  #20  
Old 05-16-2020, 11:08 PM
oldiegoldie oldiegoldie is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Oct 2015
Posts: 583
Likes: 2,761
Liked 579 Times in 293 Posts
Default

was able to find 2 of recommended powders, Titegroup and 231. so bought 1# of each. thanks again for the help.......had no idea where to start.
Reply With Quote
  #21  
Old 05-17-2020, 12:42 AM
ArchAngelCD's Avatar
ArchAngelCD ArchAngelCD is offline
Moderator
SWCA Member
Absent Comrade
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Dec 2006
Location: Northeast PA, USA
Posts: 8,877
Likes: 1,029
Liked 5,070 Times in 2,660 Posts
Default

Quote:
Originally Posted by oldiegoldie View Post
was able to find 2 of recommended powders, Titegroup and 231. so bought 1# of each. thanks again for the help.......had no idea where to start.
Please keep us updated. I'm curious to know how well you like W231. With that 100gr bullet I think you will like a 3.0gr W231 charge.
__________________
Freedom is never free!!
SWCA #3437
Reply With Quote
  #22  
Old 05-17-2020, 01:34 PM
mikld's Avatar
mikld mikld is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: May 2012
Location: S. Orygun
Posts: 2,461
Likes: 1,962
Liked 1,827 Times in 987 Posts
Default

Quote:
Originally Posted by oldiegoldie View Post
am new to reloading [loaded for rifle 60 yrs ago] and need a reliable, fool proof, safe powder. using 100 gr Berry's bullets and Federal small pistol primers. will be range ammo. appreciate any suggestions.
All the safety, and "fool proof" is from the nut behind the press handle. Some of the powders I use have a "range" from minimum to maximum of less than 1 grain, so the safety is up to me. Some powders can be double charged quite easily, but the safety aspect is me, as I look in every case that is charged with powder and I make sure there are no double charged nor any empty cases. I've been reloading for quite a while and haven't run across any unreliable modern smokeless powder...

But for my 380 ACP I have tried;
Bullseye
W231
Unique
Universal
CFE Pistol

and in my manual;
700x
PB
Red Dot
Green Dot
SR-4756
Blue Dot

Last edited by mikld; 05-17-2020 at 01:41 PM.
Reply With Quote
The Following User Likes This Post:
  #23  
Old 05-17-2020, 05:31 PM
Funflyer's Avatar
Funflyer Funflyer is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Sep 2016
Location: Central Arizona
Posts: 1,031
Likes: 1,096
Liked 1,742 Times in 585 Posts
Default

Quote:
Originally Posted by oldiegoldie View Post
was able to find 2 of recommended powders, Titegroup and 231. so bought 1# of each. thanks again for the help.......had no idea where to start.

Speaking from experience, I think you'll like TG much better than 231. I was at the range this morning with my new SA 911 testing several bullets and powders, as I always do with any new gun, and did a head to head between those two powders just for grins. I compared the 90gn XTP, and also some heavier 102gn, and 105gn castings. Loads ranged from start, mid and max charge for each bullet. Not only was TG more accurate with every bullet and powder charge, it also produced the lowest ES and SD. HP-38 was at its best with the max charge, but still not as accurate as any of the TG loads. I even managed to find a new favorite 90gn XTP load by doing the test. 3.4gn TG made 1006fps average with a 1-1/2" group at 10 yards. About as good as it gets from a 2.7" barrel.
Reply With Quote
  #24  
Old 05-17-2020, 07:28 PM
kbm6893 kbm6893 is offline
SWCA Member
powder for .380 powder for .380  
Join Date: Apr 2007
Location: Pennsylvania
Posts: 6,625
Likes: 636
Liked 6,861 Times in 2,541 Posts
Default

Quote:
Originally Posted by ArchAngelCD View Post
Please keep us updated. I'm curious to know how well you like W231. With that 100gr bullet I think you will like a 3.0gr W231 charge.
I use HP38, same as 231, and I load 3.0 grains over a 100 grain bullet. Works for me.
Reply With Quote
  #25  
Old 05-17-2020, 08:01 PM
BlackTalonJHP's Avatar
BlackTalonJHP BlackTalonJHP is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: May 2012
Location: Texas
Posts: 1,000
Likes: 259
Liked 636 Times in 317 Posts
Default

I've used lots of powders but honestly my favorite/most accurate/softest shooting has been 3.5 grains of CFE pistol with 100 grain Berry's. I save my Titegroup for 9mm. I've found W231 to be good for several loads but for me it's a jack of all trades master of none.
Reply With Quote
  #26  
Old 05-17-2020, 08:04 PM
scooter123 scooter123 is offline
Member
 
Join Date: Jan 2009
Location: Metro Detroit, Michigan
Posts: 6,919
Likes: 179
Liked 4,294 Times in 2,106 Posts
Default

I have a Sig P290 in 380, the pistol with the weakest ejection of all pistols ever made. In an effort to try and get enough oomf in the ejection to get thru just one magazine without an ejection jam I've loaded Berry's 100 gn bullets over a full case of CFE Pistol. Which is about 10% over the listed maximum so it's really a +P load. Good news is that there was no harm at all to the pistol or case. Bad news is that the P290 still couldn't throw a case clear of the ejection port. IMO the only way to get reliability with this pistol is to shoot it left handed with the ejection port pointing towards the ground. Yeah, you have to shoot it Gansta Style.

Anyhow, I would suggest using CFE Pistol. It meters very well and there is no need to be concerned about a double charge because there isn't enough room in the case to do that.
Reply With Quote
  #27  
Old 05-17-2020, 09:05 PM
oldiegoldie oldiegoldie is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Oct 2015
Posts: 583
Likes: 2,761
Liked 579 Times in 293 Posts
Default

Quote:
Originally Posted by mikld View Post
All the safety, and "fool proof" is from the nut behind the press handle. Some of the powders I use have a "range" from minimum to maximum of less than 1 grain, so the safety is up to me. Some powders can be double charged quite easily, but the safety aspect is me, as I look in every case that is charged with powder and I make sure there are no double charged nor any empty cases. I've been reloading for quite a while and haven't run across any unreliable modern smokeless powder...

But for my 380 ACP I have tried;
Bullseye
W231
Unique
Universal
CFE Pistol

and in my manual;
700x
PB
Red Dot
Green Dot
SR-4756
Blue Dot
yeah, i'm worried about the nut tugging on the press handle. that's why i'm seeking advise. at close to 82 yrs of age, a person has to know his mind isn't as keen as he used to think it was. i'll try to post something every once in awhile so you'll know i haven't nuked myself.

i did order the Lyman manual....a little disappointed in the Lee manual's light coverage of the .380. thanks again for the recommendations.
Reply With Quote
  #28  
Old 05-18-2020, 01:27 AM
bulletslap bulletslap is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Jan 2010
Location: Texas
Posts: 1,031
Likes: 1,061
Liked 1,738 Times in 624 Posts
Default

700X and Unique.
Reply With Quote
  #29  
Old 05-18-2020, 09:22 AM
gwpercle's Avatar
gwpercle gwpercle is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,838
Likes: 7,394
Liked 8,050 Times in 3,652 Posts
Default

Several good powders for 380 Auto : from fast to slower
Bullseye
700X
Red Dot
Accurate #2
Titegroup
W231
HP38
Unique

They are all suitable , get some now , I hear there is going to be another shortage .

Keep on keeping on...us older guys need to stick together !
Gary
__________________
Certified Cajun
NRA Member

Last edited by gwpercle; 05-18-2020 at 09:24 AM.
Reply With Quote
  #30  
Old 05-20-2020, 05:09 PM
Moe Mentum Moe Mentum is offline
Member
powder for .380 powder for .380 powder for .380 powder for .380 powder for .380  
Join Date: Apr 2014
Location: Central Florida
Posts: 798
Likes: 582
Liked 470 Times in 273 Posts
Default

I use Red Dot and HP38 for .380
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Black Powder Blank 12 gauge shotshells. Powder help? Vegetaman Reloading 23 10-06-2022 08:53 PM
Does This Gun Use Black Powder Or Smokeless Powder? Dating H&R .32 Cal. Vest Pocket MackHR Firearms & Knives: Other Brands & General Gun Topics 2 07-08-2016 11:15 AM
Reloading extras mainly powder must be willing to pick up in Arkansas for the Powder garagelifter Accessories/Misc - For Sale or Trade 1 07-28-2014 07:40 AM
Hornady Powder Cop or Dillon Powder Check? blujax01 Reloading 10 01-30-2014 12:26 PM
RCBS Little Dandy Powder Measure and Unique Powder Cyrano Reloading 10 04-03-2011 11:41 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 02:56 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)