|
|
07-13-2020, 05:50 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
I'm in deep now
I ordered the Dillon 750 XL Essential set up for .223 to start with. After I get the hang of things I will add .357 & 9mm. I know I have a lot to learn but I'll get there.
|
The Following 17 Users Like Post:
|
Abflyboy, brucev, chief38, duman444, Golphin, hotshot357, J. R. WEEMS, JJEH, llowry61, max, Mike, SC Hunter, pasote, Protocall_Design, Skeet 028, Skeptic 9c, SLT223, Valmet |
07-13-2020, 06:15 PM
|
|
Member
|
|
|
Join Date: Apr 2011
Location: Where this month?
Posts: 3,604
Likes: 264
Liked 4,215 Times in 1,714 Posts
|
|
In deep is when you shoot 6 or more calibers, rifle and handgun and never buy factory loaded rounds.
I'm sure you'll get there tho..
|
The Following 9 Users Like Post:
|
|
07-13-2020, 07:08 PM
|
Member
|
|
|
Join Date: Apr 2016
Location: MN.
Posts: 336
Likes: 412
Liked 627 Times in 147 Posts
|
|
Quote:
Originally Posted by Glenn54
I ordered the Dillon 750 XL Essential set up for .223 to start with. After I get the hang of things I will add .357 & 9mm. I know I have a lot to learn but I'll get there.
|
It will come with pretty detailed instructions. Maybe now they come with a DVD instruction. Welcome to the Dillon club where you want to buy everything they make. Swage tool for brass, Dillon carbide dies, Case feeder, Bullet feeder. electric primer tube feeder. ETC ETC. Its a disease
|
The Following 5 Users Like Post:
|
|
07-13-2020, 07:57 PM
|
Member
|
|
|
Join Date: Oct 2018
Posts: 262
Likes: 3,267
Liked 495 Times in 164 Posts
|
|
Congratulations, welcome to the "blue crew" !!!!!! Your going to love it. Have fun and be safe.
|
The Following 3 Users Like Post:
|
|
07-13-2020, 08:05 PM
|
|
US Veteran
|
|
|
Join Date: May 2016
Location: Pa
Posts: 375
Likes: 237
Liked 1,391 Times in 226 Posts
|
|
You will love it, I've been using a 650XL for years....great machine. Only
thing I don't use is the powder drop, I chose to use my Pact powder drop and scale, I use a Dillon balance scale to check the Pact scale. It may slow me up a bit but little. Enjoy a great press you bought. Oh, and the tech support you will receive is second to none.
|
The Following 4 Users Like Post:
|
|
07-13-2020, 09:20 PM
|
|
US Veteran
|
|
|
Join Date: Aug 2007
Location: Augusta, GA
Posts: 6,125
Likes: 6,651
Liked 6,168 Times in 2,672 Posts
|
|
Free knowledge from my experience
If you shoot an AR 15; buy an RCBS Small Base X-die sizer die OR if shooting a bolt action; buy an RCBS standard X-die sizer die, AND anneal your case necks before resizing.
Case life will be much more than 2 or 3 firings before the neck cracks. Also, the force needed to resize the cases will be 50% less. I have had a torn rotator cuff repaired on my right shoulder because of reloading for 45 years. 35 of those years was using a Dillon progressive press that is still working tonight.
My experience, your free knowledge.
__________________
S&WHF 366
|
The Following 2 Users Like Post:
|
|
07-13-2020, 09:25 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2001
Location: illinois
Posts: 6,296
Likes: 1,850
Liked 6,685 Times in 2,117 Posts
|
|
They use to come with a vhs tape. I bet they have something better now or you can use youtube.
|
The Following User Likes This Post:
|
|
07-13-2020, 09:25 PM
|
|
Member
|
|
|
Join Date: Oct 2014
Location: Micanopy Florida
Posts: 1,536
Likes: 6,645
Liked 2,476 Times in 948 Posts
|
|
The problem now may be finding the components to use with that new Dillon. I hope you have a good stock of parts already. If not you will be ready to roll when supplies come back.
|
The Following User Likes This Post:
|
|
07-13-2020, 11:33 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
Thanks. I will check into it.
I sure don't need any more shoulder problems than what I already have.
Quote:
Originally Posted by Engineer1911
If you shoot an AR 15; buy an RCBS Small Base X-die sizer die OR if shooting a bolt action; buy an RCBS standard X-die sizer die, AND anneal your case necks before resizing.
Case life will be much more than 2 or 3 firings before the neck cracks. Also, the force needed to resize the cases will be 50% less. I have had a torn rotator cuff repaired on my right shoulder because of reloading for 45 years. 35 of those years was using a Dillon progressive press that is still working tonight.
My experience, your free knowledge.
|
|
07-13-2020, 11:46 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2016
Location: western NC
Posts: 3,053
Likes: 2,541
Liked 6,882 Times in 2,151 Posts
|
|
Quote:
Originally Posted by bigggbbruce
In deep is when you shoot 6 or more calibers, rifle and handgun and never buy factory loaded rounds.
|
I certainly resemble that remark; sometimes I wonder if "in deep" and "in over my head" are the same thing. I'm at ten different calibers that I shoot and load for. Only factory ammo I buy is shotgun, and I'm thinking of loading for the 12 gauge at least.
|
07-14-2020, 02:02 AM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
I'm shooting an AR 15, no bolt actions.
Will the RCBS Small Base X-die sizer be used on the Dillon 750 or will I need to get something else for this part of the process?
Thanks.
Quote:
Originally Posted by Engineer1911
If you shoot an AR 15; buy an RCBS Small Base X-die sizer die OR if shooting a bolt action; buy an RCBS standard X-die sizer die, AND anneal your case necks before resizing.
Case life will be much more than 2 or 3 firings before the neck cracks. Also, the force needed to resize the cases will be 50% less. I have had a torn rotator cuff repaired on my right shoulder because of reloading for 45 years. 35 of those years was using a Dillon progressive press that is still working tonight.
My experience, your free knowledge.
|
|
07-14-2020, 09:59 AM
|
Member
|
|
|
Join Date: Dec 2016
Location: South Carolina
Posts: 1,711
Likes: 1,054
Liked 3,515 Times in 959 Posts
|
|
Getting in deep? Just wait and you will learn what deep is. Started loading in the late 70’s. Wound up loading for around 15 calibers. Wound up selling all my loading stuff when kids came and no longer had time to hunt and shoot. Started back after 20 years with intention of only loading .38 wadcutters. Now load for 8 Handgun calibers and 2 rifle. You don’t save money by loading, you just shoot more but with better ammo
|
The Following 5 Users Like Post:
|
|
07-14-2020, 10:36 AM
|
|
Member
|
|
|
Join Date: Apr 2012
Location: Houston, TX
Posts: 3,718
Likes: 1,602
Liked 6,314 Times in 2,294 Posts
|
|
I guess I'm different. I started to load decades ago but stuck to just a few handgun calibers. .38/.357, .45ACP/AR, .41 Magnum, .380, 9mm. The last two I don't shoot or load a whole lot but I do have the ability to do so if need be. I shoot .22 handguns also. I don't even own a rifle.
I find I can only shoot so many guns. Any more than half a dozen or so and I can't seem to get regular trigger time. Plus I can't say I really love reloading. I just want the ammo.
My Dillon RL450 (due to a conversion it's now really a Franken 550) is still going strong.
|
The Following User Likes This Post:
|
|
07-14-2020, 10:42 AM
|
Member
|
|
|
Join Date: Oct 2000
Location: Posen, IL, USA
Posts: 669
Likes: 1,788
Liked 988 Times in 388 Posts
|
|
Quote:
Originally Posted by glenwolde
I guess I'm different. I started to load decades ago but stuck to just a few handgun calibers. .38/.357, .45ACP/AR, .41 Magnum, .380, 9mm. The last two I don't shoot or load a whole lot but I do have the ability to do so if need be. I shoot .22 handguns also. I don't even own a rifle.
I find I can only shoot so many guns. Any more than half a dozen or so and I can't seem to get regular trigger time. Plus I can't say I really love reloading. I just want the ammo.
My Dillon RL450 (due to a conversion it's now really a Franken 550) is still going strong.
|
I've come to the same conclusion. I shoot 5 or 6 guns regularly but own many more.
I never set out to be but somehow have grown into being a collector.
|
The Following 2 Users Like Post:
|
|
07-14-2020, 10:45 AM
|
Member
|
|
|
Join Date: Jun 2019
Posts: 55
Likes: 1
Liked 73 Times in 29 Posts
|
|
Quote:
Originally Posted by Glenn54
After I get the hang of things I will add .357 & 9mm.
|
In terms of the loading learning curve and simplicity, 38/357 are the easiest as they are straight-wall. Then 9mm (slight taper) and lastly .223 as a necked cartridge. Good luck and be safe.
|
The Following 4 Users Like Post:
|
|
07-14-2020, 10:59 AM
|
|
Member
|
|
|
Join Date: Jan 2009
Location: SW CT
Posts: 2,419
Likes: 2,535
Liked 3,024 Times in 950 Posts
|
|
Quote:
Originally Posted by Glenn54
I'm shooting an AR 15, no bolt actions.
Will the RCBS Small Base X-die sizer be used on the Dillon 750 or will I need to get something else for this part of the process?
Thanks.
|
Honestly, I would not bother with the RCBS dies. Everyone has a favorite, it is just not my personal preference.
The Dillon die works fine and makes good ammo. The properly adjusted Dillon die sizes fine for the AR chamber no need for any other gizmos.
I do recommend getting a good case gauge to size the cases and adjust the die. You'll need to trim the cases to the correct length. A good case gauge will help with that too. I have a Dillon gauge other people make fine gauges too.
I also think that rifle is harder to start out with over the pistol cartridges. Be sure to read up on the process and start with small batches.
|
The Following 5 Users Like Post:
|
|
07-14-2020, 11:02 AM
|
|
Member
|
|
|
Join Date: Oct 2015
Location: Southern NJ
Posts: 4,681
Likes: 18,973
Liked 4,189 Times in 1,864 Posts
|
|
Glenn,
I purchased a Dillon SDB in the late 1980s, then moved into a 550B in the early 1990s. I quickly learned that I was unable to load an acceptable match round for my Garand and M1A using the Dillon, so rifle ammo is coming off the old RCBS single stage, and the Dillon is producing: 380, 38 Special, 357 Magnum, 9mm, 40 S&W, 41 Magnum, 44 Special, and 45 ACP.
I would venture that once you get the feel of reloading with your Dillon, you'll most likely give casting a shot!
__________________
Judge control not gun control!
|
The Following User Likes This Post:
|
|
07-14-2020, 11:11 AM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Central Texas
Posts: 7,437
Likes: 13,465
Liked 8,496 Times in 2,835 Posts
|
|
Good luck with it. I want to start too, especially since I now own somewhat of an exotic. But I also like to keep people like Buffalo Bore, Weatherby, Hornady and Norma in business. The struggle is real
__________________
Jorge
|
The Following User Likes This Post:
|
|
07-14-2020, 11:11 AM
|
|
Member
|
|
|
Join Date: Jan 2009
Posts: 3,309
Likes: 2,722
Liked 5,053 Times in 1,441 Posts
|
|
Quote:
Originally Posted by old pipefitter
It will come with pretty detailed instructions. Maybe now they come with a DVD instruction. Welcome to the Dillon club where you want to buy everything they make. Swage tool for brass, Dillon carbide dies, Case feeder, Bullet feeder. electric primer tube feeder. ETC ETC. Its a disease
|
There's also youtube videos from individual users that can be helpful. Some of them fill in with experience factor where Dillon instruction leaves off. At least I found this to be the case with the 650.
|
The Following User Likes This Post:
|
|
07-14-2020, 12:58 PM
|
Member
|
|
|
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,897
Likes: 14,026
Liked 13,734 Times in 4,977 Posts
|
|
In deep is when you load for LOTS of calibers and guages. In deep is when you cast bullets for almost everything you shoot and pour your own shot for your shotguns. In deep is when you build your own rifle/pistol range and build your own skeet field........Guess I'm in so deep I'm drownt.
__________________
S&W Accumulator
Last edited by Mike, SC Hunter; 07-14-2020 at 12:59 PM.
|
The Following 3 Users Like Post:
|
|
07-14-2020, 01:44 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2015
Location: Black Hills of SD
Posts: 2,789
Likes: 2,173
Liked 4,212 Times in 1,805 Posts
|
|
You will like drinkin that Blue Kool-aid.
|
The Following User Likes This Post:
|
|
07-14-2020, 01:51 PM
|
US Veteran
|
|
|
Join Date: Nov 2014
Location: central Virginia
Posts: 2,930
Likes: 13,341
Liked 6,998 Times in 2,114 Posts
|
|
Quote:
Originally Posted by Maurice H
In terms of the loading learning curve and simplicity, 38/357 are the easiest as they are straight-wall. Then 9mm (slight taper) and lastly .223 as a necked cartridge. Good luck and be safe.
|
To add to this - I'd start with .357 until very familiar with your press operation; it's a straight wall, no neck, no shoulder case and doesn't have the critical shoulder length and OAL length concerns a magazine fed autoloader does.
Nice rig - be careful and have fun!
|
The Following 2 Users Like Post:
|
|
07-14-2020, 01:55 PM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,874
Likes: 7,481
Liked 8,128 Times in 3,678 Posts
|
|
Go slow , take your time and Load Safe .
It's ok to get anal and OCD about getting one charge of powder in the case .
Two charges is just as bad as no charge ...check twice .
There are no awards given for speed reloading . My dear Mom would tell me " Haste makes waste" ... I will tell you , do it right the first time and you won't spend as much time with a bullet puller undoing mistakes ... Trust me on this one ... I know !
Load Safe,
Gary
__________________
Certified Cajun
NRA Member
|
The Following 3 Users Like Post:
|
|
07-14-2020, 03:29 PM
|
Member
|
|
|
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
|
|
Congrats on your new setup; as other above I'd suggest to start with a straight wall cartridge. 223 is a little more involved, I do it in 2 stage - 1st is size and trim (I have Dillon trimmer) so it's 1 cycle through the press, then clean the lube and go for 2nd cycle with actual priming, powder, bullet seat and crimp.
|
The Following User Likes This Post:
|
|
07-14-2020, 06:39 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
That is what I have got in mind, not really trying to save money. But I do want to buy all necessary supplies when available so I can get stocked up on the calibers I need.
Quote:
Originally Posted by Eddietruett
Getting in deep? Just wait and you will learn what deep is. Started loading in the late 70’s. Wound up loading for around 15 calibers. Wound up selling all my loading stuff when kids came and no longer had time to hunt and shoot. Started back after 20 years with intention of only loading .38 wadcutters. Now load for 8 Handgun calibers and 2 rifle. You don’t save money by loading, you just shoot more but with better ammo
|
|
07-14-2020, 09:14 PM
|
Member
|
|
|
Join Date: Jan 2009
Posts: 338
Likes: 1,109
Liked 255 Times in 131 Posts
|
|
Quote:
Originally Posted by wheelgun28
Honestly, I would not bother with the RCBS dies. Everyone has a favorite, it is just not my personal preference.
The Dillon die works fine and makes good ammo. The "PROPERLY ADJUSTED" Dillon die sizes fine for the AR chamber no need for any other gizmos.
|
fixed it for you
I have a lightly used 650XL. It is in the neighborhood of 150k rounds loaded since I bought it new about 4 years ago. I do a little competition shooting so loading my own ammo is a VERY economical solution for me at the volume I shoot.
When it comes to loading 5.56 ammo, the only sizing die that has NEVER caused me an issue in my rifles is Dillon. I have tried many other brands of dies with varying degrees of failure.
Pro tip: Visually inspect EVERY case for powder charge BEFORE you seat the bullet. Static bridge in a powder hopper is rare, but it does happen. It is also easier than you would think to run your powder hopper empty ...
|
The Following 5 Users Like Post:
|
|
07-14-2020, 11:33 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
I have a bunch of lead that I have used for fishing weights and jigs. I also have a Lee melting pot so I guess I'd just need to get the right molds?
Quote:
Originally Posted by lrrifleman
Glenn,
I purchased a Dillon SDB in the late 1980s, then moved into a 550B in the early 1990s. I quickly learned that I was unable to load an acceptable match round for my Garand and M1A using the Dillon, so rifle ammo is coming off the old RCBS single stage, and the Dillon is producing: 380, 38 Special, 357 Magnum, 9mm, 40 S&W, 41 Magnum, 44 Special, and 45 ACP.
I would venture that once you get the feel of reloading with your Dillon, you'll most likely give casting a shot!
|
|
07-14-2020, 11:38 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
What all do I need to change calibers? The Dillon setup is for 223 and I ordered some 9mm dies after I ordered the press. If loading for .357 would be better to start learning on, do I just need the 3 Dillon dies? Thanks.
|
07-15-2020, 12:38 AM
|
|
Member
|
|
|
Join Date: Oct 2015
Location: Kentucky
Posts: 245
Likes: 413
Liked 210 Times in 115 Posts
|
|
No, you are gonna need a conversion kit. It should include a shell plate, powder funnel and buttons (forget correct name). I’m speaking from 550 knowledge, pretty sure 750 will be the same. Some parts of the conversion kit will interchange with other calibers. If your cheap like me, you can piece some together.
I hope you like your Dillon, I love mine.
David
|
The Following User Likes This Post:
|
|
07-15-2020, 12:50 AM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
Thanks David. I will do a search on conversion kit or shell plate for the Dillon 750 and see what I can find.
You're right, the conversion kit comes with all the stuff you mentioned plus a few things. But it does not come with the dies. That seems odd to me. Is it because some guys use different brands of dies or may already have the dies?
Quote:
Originally Posted by 68Dave
No, you are gonna need a conversion kit. It should include a shell plate, powder funnel and buttons (forget correct name). I’m speaking from 550 knowledge, pretty sure 750 will be the same. Some parts of the conversion kit will interchange with other calibers. If your cheap like me, you can piece some together.
I hope you like your Dillon, I love mine.
David
|
Last edited by Glenn54; 07-15-2020 at 01:01 AM.
|
07-15-2020, 06:07 AM
|
|
Member
|
|
|
Join Date: Apr 2006
Posts: 17,799
Likes: 7,843
Liked 25,702 Times in 8,685 Posts
|
|
Quote:
Originally Posted by Glenn54
I ordered the Dillon 750 XL Essential set up for .223 to start with. After I get the hang of things I will add .357 & 9mm. I know I have a lot to learn but I'll get there.
|
Glad to hear you're "in the game"!
I'd just like to make what I feel is an important suggestion here.... I would NOT start off with .223, but instead learn your Press with a simple and easy cartridge like 9mm, .45 acp, .38 special, etc. There are so many things going on and to watch at the same time - you don't need to start off with a more complicated round to load.
Just trying to make this suggestion to save you from frustration, trimming cases, etc. when starting off on something that should be a fun/learning process.
In any event, good luck with your new Dillon - you certainly bought the right brand!
|
The Following User Likes This Post:
|
|
07-15-2020, 09:43 AM
|
Member
|
|
|
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
|
|
When I started reloading I've made a conscious decision to use bulkier powders, which ideally would overflow in case of double charge. I've made a mess few times but mess in reloading room is much safer and cheaper than on the range
|
07-15-2020, 09:45 AM
|
|
Member
|
|
|
Join Date: Oct 2015
Location: Southern NJ
Posts: 4,681
Likes: 18,973
Liked 4,189 Times in 1,864 Posts
|
|
Quote:
Originally Posted by Glenn54
I have a bunch of lead that I have used for fishing weights and jigs. I also have a Lee melting pot so I guess I'd just need to get the right molds?
|
You need to decide if you're going to shoot bare/lubed or coated bullets.
If you decide to shoot lubed bullets, you need some form of lubri-sizer: either a Lee tumble lube setup (affordable) or a Lyman/RCBS lubrisizer with sizing die and top punch for each bullet cast (potentially expensive). If you decide to shoot coated bullets, you need: a Lee sizer (one for each caliber cast), the coating powder (under $20), and an inexpensive toasted oven that will ONLY be used to bake the bullets.
Powder coating can be the least expensive approach to casting your own!
__________________
Judge control not gun control!
|
The Following User Likes This Post:
|
|
07-15-2020, 06:24 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
I think you've about dug down to China. You really are in deep.My own range would be great but I don't think the National Forest folks would like me doing that.
Quote:
Originally Posted by Mike, SC Hunter
In deep is when you load for LOTS of calibers and guages. In deep is when you cast bullets for almost everything you shoot and pour your own shot for your shotguns. In deep is when you build your own rifle/pistol range and build your own skeet field........Guess I'm in so deep I'm drownt.
|
Last edited by Glenn54; 07-15-2020 at 10:15 PM.
|
07-17-2020, 10:49 AM
|
US Veteran
|
|
|
Join Date: Mar 2000
Location: Monroeville, Ohio,USA
Posts: 2,985
Likes: 852
Liked 6,225 Times in 1,562 Posts
|
|
My 2 cents worth!
Welcome to the world of blue! I also have spent a small fortune with Dillon! I have seen nothing but good advice above! The only thing I would like to add is this! Reloading is a solitary endeavor! My reloading room is in my shop with NO TV, NO RADIO, and other distractions. If I need to talk on the phone I stop, sit back, and talk! Don't drive and text and don't reload with outside distractions! 40 years of reloading and still learning!
jcelect
|
The Following User Likes This Post:
|
|
07-17-2020, 03:37 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
I agree. I plan on doing the same, giving it my undivided attention.
Quote:
Originally Posted by jcelect
Welcome to the world of blue! I also have spent a small fortune with Dillon! I have seen nothing but good advice above! The only thing I would like to add is this! Reloading is a solitary endeavor! My reloading room is in my shop with NO TV, NO RADIO, and other distractions. If I need to talk on the phone I stop, sit back, and talk! Don't drive and text and don't reload with outside distractions! 40 years of reloading and still learning!
jcelect
|
|
07-23-2020, 03:55 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
Dillon says 6 more weeks before getting the XL750 Essentials 223, backordered. I asked Dillon if they had "any" reloading machines, nothing in stock. One of the Dillon distributers says no one knows how much longer it will be before they have any stock. Disappointed but what can you do.
|
07-23-2020, 07:33 PM
|
|
Member
|
|
|
Join Date: Jan 2009
Location: SW CT
Posts: 2,419
Likes: 2,535
Liked 3,024 Times in 950 Posts
|
|
That gives you more time to read up on things. Maybe watch some videos on rifle loading too. Possibly start looking at case trimmers, gauges, deburing tools, crimp removers and so on.
You can even start sourcing bullets, powder and primers.
Then figure out your load combination.
This is all good things!
|
The Following User Likes This Post:
|
|
07-24-2020, 12:50 AM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
I was thinking along the same lines. The Dillon Essentials kit comes with the Lyman 50th edition. Which manual/book would be a good compliment to the Lyman? Thanks.
Quote:
Originally Posted by wheelgun28
That gives you more time to read up on things. Maybe watch some videos on rifle loading too. Possibly start looking at case trimmers, gauges, deburing tools, crimp removers and so on.
You can even start sourcing bullets, powder and primers.
Then figure out your load combination.
This is all good things!
|
Last edited by Glenn54; 07-24-2020 at 12:54 AM.
|
07-25-2020, 12:03 AM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
My how fast things change. Got a notification from FedEx today that the Dillon XL 750 Essentials is on its way. No notification from Dillon but I know they are very busy.
Quote:
Originally Posted by wheelgun28
That gives you more time to read up on things. Maybe watch some videos on rifle loading too. Possibly start looking at case trimmers, gauges, deburing tools, crimp removers and so on.
You can even start sourcing bullets, powder and primers.
Then figure out your load combination.
This is all good things!
|
|
07-25-2020, 11:32 AM
|
Member
|
|
|
Join Date: Jan 2014
Location: Central Texas
Posts: 916
Likes: 1,409
Liked 1,083 Times in 361 Posts
|
|
I see that the Essentials package does not include the case feeder. IMO the case feeder is what makes a 650/750 an efficiency machine.
I load 223 on my 650 in three stages:
1. Load up the case feeder and size/deprime. I have a separate tool head with only the sizing die installed.
2. Tumble cases and trim to length.
3. Install the tool head with the powder drop, bullet seater, and crimp die if you decide to use one. Fill the case feeder with polished and trimmed cases, and finish the reloading process.
The case feeder makes all this a breeze!
FWIW H335 meters like water in the 650.
Last edited by MrG5122; 07-25-2020 at 11:36 AM.
|
The Following User Likes This Post:
|
|
07-26-2020, 02:41 PM
|
Member
|
|
|
Join Date: Jan 2019
Location: East Texas
Posts: 206
Likes: 450
Liked 168 Times in 73 Posts
|
|
Thanks. Good suggestion. I went to their website and notice the case feeder are for different size shells.
Is there some type of conversion to go from .357 to 9mm, for example?
Quote:
Originally Posted by MrG5122
I see that the Essentials package does not include the case feeder. IMO the case feeder is what makes a 650/750 an efficiency machine.
I load 223 on my 650 in three stages:
1. Load up the case feeder and size/deprime. I have a separate tool head with only the sizing die installed.
2. Tumble cases and trim to length.
3. Install the tool head with the powder drop, bullet seater, and crimp die if you decide to use one. Fill the case feeder with polished and trimmed cases, and finish the reloading process.
The case feeder makes all this a breeze!
FWIW H335 meters like water in the 650.
|
|
07-28-2020, 10:38 AM
|
Member
|
|
|
Join Date: Jan 2014
Location: Central Texas
Posts: 916
Likes: 1,409
Liked 1,083 Times in 361 Posts
|
|
Quote:
Originally Posted by Glenn54
Thanks. Good suggestion. I went to their website and notice the case feeder are for different size shells.
Is there some type of conversion to go from .357 to 9mm, for example?
|
The case feeder has a rotating plate to drop the cases in the tube. There are five different plates.
Small pistol
Large pistol
Small rifle
Large rifle
Magnum rifle
For your calibers (9mm, 357, 223) you would need the first three plates.
They all work in the same case feeder and are just a drop-in installation. No tools needed. If I recall they run about $40 each.
|
The Following User Likes This Post:
|
|
07-28-2020, 11:15 AM
|
|
Member
|
|
|
Join Date: Mar 2017
Location: SW Florida
Posts: 2,140
Likes: 3,411
Liked 3,157 Times in 1,026 Posts
|
|
Its a black hole of fun and learning excitement... just as I think I have the hang of pistol, I decide to go jump into rifle.
__________________
This is the way....
|
The Following User Likes This Post:
|
|
07-28-2020, 12:56 PM
|
Member
|
|
|
Join Date: Sep 2014
Location: IA
Posts: 1,726
Likes: 991
Liked 1,626 Times in 799 Posts
|
|
Quote:
Originally Posted by Glenn54
I have a bunch of lead that I have used for fishing weights and jigs. I also have a Lee melting pot so I guess I'd just need to get the right molds?
|
It sounds like you're half way there. Lee has 2 cavity molds for $20 and they're great for testing out casting. You'll need to lube or powder coat the bullets to prevent leading and sizing is also recommended. Lee has sizing dies for $20, but I think you'll need something other than your Dillon press to for that operation.
|
The Following User Likes This Post:
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|