|
|
09-06-2020, 07:43 AM
|
Member
|
|
|
Join Date: May 2013
Location: Whitney,Tx
Posts: 185
Likes: 41
Liked 109 Times in 64 Posts
|
|
RCBS carbide sizer decapping rod
Can someone tell me what size decapping rod assembly I need for a 45ACP carbide sizer? I emailed RCBS but got no reply.
I ant to use it on my Dillon 650 and need to decap in the sizing die, my die set expand and decaps in the 2nd die.
|
09-06-2020, 12:35 PM
|
Member
|
|
|
Join Date: Nov 2007
Location: Colorado, where the mount
Posts: 182
Likes: 19
Liked 189 Times in 81 Posts
|
|
|
09-06-2020, 05:48 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,443
Likes: 23,477
Liked 26,353 Times in 9,136 Posts
|
|
You may have a very old RCBS sizer. If so it will not have a radii mouth, for production (fast) loading that is necessary. If you need a new first die (size and decap, I would suggest a Dillon. They are great with cast bullets, as you can take them apart to clean without removing from the press! I use my Dillon 45 ACP sizing die for both 45 ACP and 45 Colt (Long), it will also work for 45 Auto Rim, 45 GAP, 45 Schofield and 45 US. (and the rare 45 Winchester Mag.)
May as well get one that will do double duty!
Get decapping pins too, other brands don't fit.
Ivan
|
09-06-2020, 08:10 PM
|
|
US Veteran
|
|
|
Join Date: Aug 2007
Location: Augusta, GA
Posts: 6,129
Likes: 6,653
Liked 6,170 Times in 2,674 Posts
|
|
Post #2 has correct stem, but is missing the bushing. Never buy RCBS parts from MidwayUSA. I usually get free parts from RCBS.
This is really simple. My 1980 RCBS 45 ACP carbide sizing die has a large entry radius. A knurled bushing with a 7/16" - 20 TPI outside diameter with a 1/4" - 28 TPI internal tapped hole fits in the top of the sizer die. The decapping stem is 1/4" - 28 TPI external threads with a large decapping pin. This decapping Assembly is a standard part from RCBS with bushing, stem, pin, pin retainer, and stem lock nut.
__________________
S&WHF 366
|
09-07-2020, 07:28 AM
|
Member
|
|
|
Join Date: May 2013
Location: Whitney,Tx
Posts: 185
Likes: 41
Liked 109 Times in 64 Posts
|
|
RCBS
They used to have beak downs of their dies and you could get the part numbers for what you needed. Before they have always sent m what I needed, this time I didn't even get a reply.
|
09-07-2020, 07:31 AM
|
Member
|
|
|
Join Date: May 2013
Location: Whitney,Tx
Posts: 185
Likes: 41
Liked 109 Times in 64 Posts
|
|
I also need the part that screws into to fit it to the sizer die.
Quote:
Originally Posted by cfplinker
|
|
09-07-2020, 07:56 AM
|
Member
|
|
|
Join Date: Nov 2007
Location: Colorado, where the mount
Posts: 182
Likes: 19
Liked 189 Times in 81 Posts
|
|
That would probably be the 09626 guide bushing. Their phone number is 800-533-5000. A call may be better than an e-mail.
|
The Following 2 Users Like Post:
|
|
09-07-2020, 10:22 AM
|
|
US Veteran
|
|
|
Join Date: Mar 2001
Location: illinois
Posts: 6,299
Likes: 1,850
Liked 6,696 Times in 2,119 Posts
|
|
I called a couple of weeks ago and they sent my a new pin and stem for .45acp. No charge!!!!!!
Quote:
Originally Posted by batman4706
They used to have beak downs of their dies and you could get the part numbers for what you needed. Before they have always sent m what I needed, this time I didn't even get a reply.
|
|
|
Posting Rules
|
|
|
|
|