Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 09-07-2020, 12:59 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default Reload stand setup

Since I have no primers, I'm spending time thinking about layout and setup. I decided I would rather stand than sit so I raised my reload stand where I could operate the arm comfortably while standing and also get a good view of the charged shell to help ensure no squibs or doubles. The stand is mobile, I can relocate or adapt if I don't like it. Right now, it is set in the middle of the bench so I will have room to set trays and supplies on either side.

The powder dispenser is extendable/retractable, rotates and can be removed. I should be able to charge right into the die or balance scale pan. If I get more ambitions, I will make it where I can lower it all the way down for easy dispensing directly into the shell or pan.

If my new obsession with reloading sticks and I decide to upgrade, I can modify the stand as needed.

Critiques welcome!






Last edited by Jwjarrett; 09-07-2020 at 01:04 PM.
Reply With Quote
The Following 6 Users Like Post:
  #2  
Old 09-07-2020, 01:14 PM
mikerjf mikerjf is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Sep 2018
Posts: 1,857
Likes: 2,232
Liked 2,929 Times in 1,090 Posts
Default

I have two of those! They hold up the front wheels of my Miata while I use my two jackstands on the rear, when I need the car raised but level.

2x4 Tech!
Reply With Quote
The Following 2 Users Like Post:
  #3  
Old 09-07-2020, 01:26 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

Quote:
Originally Posted by mikerjf View Post
I have two of those! They hold up the front wheels of my Miata while I use my two jackstands on the rear, when I need the car raised but level.

2x4 Tech!
Safety First! You never know when that loader is going to fall over and kill someone 2x8 -- I'm an overbuilder...
Reply With Quote
The Following User Likes This Post:
  #4  
Old 09-07-2020, 02:41 PM
Bugkiller99's Avatar
Bugkiller99 Bugkiller99 is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Mar 2013
Location: North Florida
Posts: 3,097
Likes: 5,674
Liked 5,191 Times in 1,861 Posts
Default

Where is your scale? For that, I would recommend mounting it somewhere other than your bench, ideally around eye level. It needs to be away from the steady vibrations from your press.

I am a huge fan of the Lee Turret press. Mine is up now, I’m doing some load development this weekend. I highly recommend one of these. Your back and shoulder will thank you.
"ERGO" Roller for LEE Classic Turret Press – Inline Fabrication

Take a look at some of their products. As you are well down the DIY road, you may get some inspiration. I use several of their products and am very happy with them.
__________________
Reg. Magnum wants/Rossi wallet
Reply With Quote
The Following User Likes This Post:
  #5  
Old 09-07-2020, 03:03 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

I haven't decided where to put the scale. Like you mentioned, it needs to be close to eye level. I'll think on it and my brain will come up with something.

Inline fab has some interesting stuff. Thanks for the tip.
Reply With Quote
  #6  
Old 09-07-2020, 03:19 PM
AJ's Avatar
AJ AJ is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Apr 2003
Location: East of Stick Marsh, Fla.
Posts: 9,404
Likes: 4,871
Liked 20,866 Times in 6,322 Posts
Default

Compact, mine is spread out a bit more.
Attached Images
File Type: jpg Bench1.jpg (119.4 KB, 178 views)
__________________
USMC 69-93 Combat Pistol Inst.

Last edited by AJ; 09-16-2020 at 10:27 AM.
Reply With Quote
The Following 3 Users Like Post:
  #7  
Old 09-07-2020, 03:38 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

Quote:
Originally Posted by AJ View Post
Compact sMine is spread out a bit more.
I'm betting that took a year or 20 to accumulate. Nice!
Reply With Quote
  #8  
Old 09-07-2020, 03:49 PM
AJ's Avatar
AJ AJ is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Apr 2003
Location: East of Stick Marsh, Fla.
Posts: 9,404
Likes: 4,871
Liked 20,866 Times in 6,322 Posts
Default

Quote:
Originally Posted by Jwjarrett View Post
I'm betting that took a year or 20 to accumulate. Nice!
Thank you very much. I started reloading in 1973. There is more in storage boxes. Now to teach my Grandsons to reload.
__________________
USMC 69-93 Combat Pistol Inst.
Reply With Quote
The Following User Likes This Post:
  #9  
Old 09-07-2020, 04:07 PM
HorizontalMike's Avatar
HorizontalMike HorizontalMike is offline
US Veteran
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Nov 2013
Location: South Central Texas
Posts: 1,185
Likes: 2,688
Liked 1,114 Times in 501 Posts
Thumbs up Reloading "IZZ" Survival

I also am a dedicated user of the Lee Turret system. That said, I have determined/decided that staging aspects of the reloading schedule to be BEST, or at least most ideal in my reloading.

I distinctly breakup tasks in order to maximize my accuracy:
  • I de-prime all brass first
  • I then tumble/vibrate all brass
  • I then PRIME all brass and place in 50-count styro---
  • Finally, I set/dispense the measured powder, insert desired bullet, press bullet to depth, and crimp accordingly using the turret.

In other words, for me, I feel that attempting TOO many steps at once/consecutively increases my chances of making mistakes that are avoidable. I maintain roughly 1-5k rounds of my desired calibers at all times, so "speed" is never interfering with my desire for perfection/accuracy in my reloading.

Truth be told, at my age I could probably give up reloading and purchase all of my ammo... however having +35lb various powder, several ...Ks of bullets/primers/brass kind of negates the above motivation to "purchase" what I need. And besides, the current "State Of Affairs" rather necessitates a DIY approach to "Schtuff"...
Reply With Quote
The Following User Likes This Post:
  #10  
Old 09-07-2020, 05:11 PM
mikld's Avatar
mikld mikld is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: May 2012
Location: S. Orygun
Posts: 2,461
Likes: 1,962
Liked 1,827 Times in 987 Posts
Default

I too batch reload, and I hand indexed. I'll do one or two steps at a time ending with primed and ready for bullet/powder cases.

My only thought about your set up is I might want a more sturdy mount for my powder measure than a small rod. For me, I like my powder measures to be solidly mounted, no flex, no movement at all...
Reply With Quote
The Following User Likes This Post:
  #11  
Old 09-07-2020, 07:41 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

Quote:
Originally Posted by mikld View Post
I too batch reload, and I hand indexed. I'll do one or two steps at a time ending with primed and ready for bullet/powder cases.

My only thought about your set up is I might want a more sturdy mount for my powder measure than a small rod. For me, I like my powder measures to be solidly mounted, no flex, no movement at all...
Yes, the sturdiness of the powder stand was an issue. There is no movement in the strap metal it's bolted to. The post is about 9 inches of 1" schedule 40 PVC, I sanded the bottom couple of inches to allow it to rotate with slight effort. The only problem I had was with the slot. It had a lot of up and down movement, so I tapped a hole and put a finger-tight bolt that takes all the bounce out. I'll try to put it through it's first real run next weekend, if my primed brass comes in.
Reply With Quote
  #12  
Old 09-07-2020, 10:04 PM
Engineer1911's Avatar
Engineer1911 Engineer1911 is online now
US Veteran
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2007
Location: Augusta, GA
Posts: 6,113
Likes: 6,644
Liked 6,156 Times in 2,666 Posts
Default

It will be a challenge trimming brass with that miter saw. I look forward to seeing your "pound-a-bench" for the impact bullet puller. I thought I over-built stuff.

In an earlier life you must have worked on battleships.
__________________
S&WHF 366
Reply With Quote
The Following User Likes This Post:
  #13  
Old 09-08-2020, 05:20 AM
Ivan the Butcher Ivan the Butcher is online now
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,354
Likes: 23,195
Liked 26,153 Times in 9,068 Posts
Default

On my last stand/bench set up, I had an 8" shelf mounted to the wall at eye level. You pegboard may be stable enough to use brackets for that.

Another thing to watch out for on your powder scale is Heating/A/C vents blowing on them!

Ivan
Reply With Quote
The Following 3 Users Like Post:
  #14  
Old 09-08-2020, 07:22 AM
raljr1 raljr1 is online now
SWCA Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Jun 2011
Location: Northeast FL
Posts: 5,749
Likes: 7,410
Liked 15,075 Times in 3,596 Posts
Default

Quote:
Originally Posted by HorizontalMike View Post
I also am a dedicated user of the Lee Turret system. That said, I have determined/decided that staging aspects of the reloading schedule to be BEST, or at least most ideal in my reloading.

I distinctly breakup tasks in order to maximize my accuracy:
  • I de-prime all brass first
  • I then tumble/vibrate all brass
  • I then PRIME all brass and place in 50-count styro---
  • Finally, I set/dispense the measured powder, insert desired bullet, press bullet to depth, and crimp accordingly using the turret.

In other words, for me, I feel that attempting TOO many steps at once/consecutively increases my chances of making mistakes that are avoidable. I maintain roughly 1-5k rounds of my desired calibers at all times, so "speed" is never interfering with my desire for perfection/accuracy in my reloading.

Truth be told, at my age I could probably give up reloading and purchase all of my ammo... however having +35lb various powder, several ...Ks of bullets/primers/brass kind of negates the above motivation to "purchase" what I need. And besides, the current "State Of Affairs" rather necessitates a DIY approach to "Schtuff"...
I too have a turret press and use it in single stages. I am new to reloading and loaded the first bow or two by cycling thru the different stages on the turret. My hands were sore from rotating the thing. I find it more efficient to use the turret like a single stage press. I may remove primers from several hundred casings and prime them later. Then powder and bullets.
__________________
Robert
SWCA #2906, SWHF #760
Reply With Quote
  #15  
Old 09-08-2020, 09:15 AM
johngalt's Avatar
johngalt johngalt is online now
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Feb 2007
Location: St. Paul (smokey!) MN
Posts: 5,335
Likes: 1,443
Liked 6,647 Times in 2,564 Posts
Default

I would also suggest getting a couple C-clamps and clamping the base to the workbench so that it doesn't move around.

I don't have a permanent reloading stations, but did some thing similar to what you have, but not as tall. I have my press bolted to a wood platform, which I C-clamp to my counter top when I reload. When I'm done I then put it away.
__________________
Common sense isn't so common.
Reply With Quote
  #16  
Old 09-08-2020, 11:17 AM
Nevada Ed's Avatar
Nevada Ed Nevada Ed is offline
US Veteran
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Nov 2012
Location: Reno Nv
Posts: 13,376
Likes: 3,183
Liked 12,712 Times in 5,669 Posts
Default

If you can't find C clamps, another option is a large Vise Grip
adjustable clamp that goes from 1/2" up to 4-5" of an opening
to clamp down on stuff.
Reply With Quote
  #17  
Old 09-08-2020, 01:39 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

In keeping with my inner over builder, I am well past C-clamps. Currently it's temporarily screwed in place. When I use it and make a more final decision, I'll drill holes an attach thread inserts on the bottom of the bench. I can move it out when not using and screw it down firmly when used.
Reply With Quote
The Following 2 Users Like Post:
  #18  
Old 09-08-2020, 03:15 PM
DeplorabusUnum's Avatar
DeplorabusUnum DeplorabusUnum is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Apr 2020
Location: Beautiful Pacific NW
Posts: 1,189
Likes: 2,046
Liked 1,814 Times in 702 Posts
Default

Quote:
Originally Posted by HorizontalMike View Post
I also am a dedicated user of the Lee Turret system. That said, I have determined/decided that staging aspects of the reloading schedule to be BEST, or at least most ideal in my reloading.

I distinctly breakup tasks in order to maximize my accuracy:
  • I de-prime all brass first
  • I then tumble/vibrate all brass
  • I then PRIME all brass and place in 50-count styro---
  • Finally, I set/dispense the measured powder, insert desired bullet, press bullet to depth, and crimp accordingly using the turret.
This is exactly my sequence now too, only no turret press here. Each step with an RCBS rock chucker. Don't start one process until finished with the preceding one.
__________________
What could possibly go wrong?
Reply With Quote
The Following 2 Users Like Post:
  #19  
Old 09-08-2020, 07:14 PM
AJ's Avatar
AJ AJ is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Apr 2003
Location: East of Stick Marsh, Fla.
Posts: 9,404
Likes: 4,871
Liked 20,866 Times in 6,322 Posts
Default

Quote:
Originally Posted by Jwjarrett View Post
In keeping with my inner over builder, I am well past C-clamps. Currently it's temporarily screwed in place. When I use it and make a more final decision, I'll drill holes an attach thread inserts on the bottom of the bench. I can move it out when not using and screw it down firmly when used.
I use C-clamps on my bench. The top of my bench is a laminate and to nice to have holes drilled in. I used a 2 X 10 and capped it with an oak 1 X 10. The presses are bolted down to this and then I use 8 inch c-clamps one on each end to hold it to the bench top. Works well for me.

I use mainly a Lyman Turret Press. The turret head will hold two sets of pistol dies. I have three heads, so I have six different calibers by just changing the turret head and shell holder
__________________
USMC 69-93 Combat Pistol Inst.
Reply With Quote
The Following User Likes This Post:
  #20  
Old 09-09-2020, 07:10 AM
HorizontalMike's Avatar
HorizontalMike HorizontalMike is offline
US Veteran
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Nov 2013
Location: South Central Texas
Posts: 1,185
Likes: 2,688
Liked 1,114 Times in 501 Posts
Default

Speaking of "clamping" things to bench, etc... One thing that I actually do every time, is to tape my RCBS #505 beam balance to my bench, after I get it zero'd. I tape down the plastic "adjuster" foot.

If I don't do the above, I have/had found that powder grains would get under one of the legs and throw off the zero'd setting. BTW, I also use a Redding Trickler when loading .222 and .223 for accuracy.
Reply With Quote
  #21  
Old 09-09-2020, 09:32 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

I added a couple of shelves, one at eye level for my balance scale (thanks Mr. I.T. Butcher). Both mounted with screws in studs. Not quite sturdy enough for my ex to sit on, but I don't want her hanging around anyway.
Reply With Quote
  #22  
Old 09-09-2020, 09:55 PM
Golphin's Avatar
Golphin Golphin is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Oct 2014
Location: Micanopy Florida
Posts: 1,536
Likes: 6,645
Liked 2,476 Times in 948 Posts
Default

My scales sit on the bench and my bench does not vibrate. Don't need the electronic's eye level and the balance is close enough sitting on the bench to get down to eye level. I use the Inline Fabrication mounts on the bench for my presses.
Reply With Quote
The Following User Likes This Post:
  #23  
Old 09-09-2020, 10:11 PM
carpriver's Avatar
carpriver carpriver is offline
US Veteran
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: May 2012
Location: Upper peninsula of Michig
Posts: 4,469
Likes: 31,326
Liked 7,151 Times in 2,395 Posts
Default

I have been using a lee turret press for years now. I upgraded the primer and powder delivery system. I have a dedicated bench for loading. I will de-prime brass and clean it, as I have spent time developing the loads and have the measures set up I just have screw them in the the powder measure. I keep my scale on a bench next to the press bench. The only things on my bench when I am loading is the bottle of powder I am using my primer package my recipe bullets and brass. my primer collector is the vinyl hose that came with the press, iI had a piece of PVC water line that slide in the tubing and the spent primers fall into a can, It took a while to get the bench set up the way that works for me.
__________________
Carpriver.

Last edited by carpriver; 09-09-2020 at 10:12 PM.
Reply With Quote
The Following User Likes This Post:
  #24  
Old 09-15-2020, 11:21 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

I got some primed brass yesterday so I finally got to try things out. I am liking the setup. The powder setup, with the adjustable arm and pivot worked great. I could get everything done in a steady rhythm of movements. When I was at the expanding and charging die, I could reach across with my left hand to move the powder over the funnel, throw with my right, swing it back out of the way and grab a bullet.

I have my balance setup at eye level and the digital on the bench. I would set the balance at the target weight and measure every 10th throw with both the balance and digital. Once I was convinced the the powder throws were consistent, I just used the digital every 10th by zeroing on an empty case, expanding, throwing powder and measuring to get powder weight.

I measured every round before boxing. Without hurrying, I could get 2 rounds a minute.

I have 250 shiny rounds of 40 S&W (ran out of bullets or it would have been 350). I just started running 9mm. I should have 200 done after work tomorrow. It is going to be a loud Saturday. I am going to try to refrain from punching too many holes but it is pretty easy to burn through 200 rounds.
Reply With Quote
The Following User Likes This Post:
  #25  
Old 09-16-2020, 07:02 AM
AJ's Avatar
AJ AJ is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Apr 2003
Location: East of Stick Marsh, Fla.
Posts: 9,404
Likes: 4,871
Liked 20,866 Times in 6,322 Posts
Default

Quote:
Originally Posted by Jwjarrett View Post
I got some primed brass yesterday so I finally got to try things out. I am liking the setup. The powder setup, with the adjustable arm and pivot worked great. I could get everything done in a steady rhythm of movements. When I was at the expanding and charging die, I could reach across with my left hand to move the powder over the funnel, throw with my right, swing it back out of the way and grab a bullet.

I have my balance setup at eye level and the digital on the bench. I would set the balance at the target weight and measure every 10th throw with both the balance and digital. Once I was convinced the the powder throws were consistent, I just used the digital every 10th by zeroing on an empty case, expanding, throwing powder and measuring to get powder weight.

I measured every round before boxing. Without hurrying, I could get 2 rounds a minute.

I have 250 shiny rounds of 40 S&W (ran out of bullets or it would have been 350). I just started running 9mm. I should have 200 done after work tomorrow. It is going to be a loud Saturday. I am going to try to refrain from punching too many holes but it is pretty easy to burn through 200 rounds.
As long as you are happy with it, that is all that matters. If it works for you then it is a good thing.
__________________
USMC 69-93 Combat Pistol Inst.
Reply With Quote
  #26  
Old 09-16-2020, 09:49 AM
max503's Avatar
max503 max503 is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Jan 2018
Location: So. Illinois
Posts: 2,576
Likes: 1,375
Liked 3,292 Times in 1,411 Posts
Default

I prefer to sit.
Reply With Quote
  #27  
Old 09-16-2020, 11:07 PM
Jwjarrett's Avatar
Jwjarrett Jwjarrett is offline
Member
Reload stand setup Reload stand setup Reload stand setup Reload stand setup Reload stand setup  
Join Date: Aug 2020
Location: Richardson, Texas
Posts: 81
Likes: 138
Liked 51 Times in 25 Posts
Default

Quote:
Originally Posted by max503 View Post
I prefer to sit.
I can understand that. I may convert to a sit down setup, but right now I only have stand up room. I will either get a tall stool or modify something. For the time being, standing it is.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New York Reload, maybe the Missouri Reload. lawandorder The Lounge 6 05-10-2020 09:14 PM
Sling Setup for My New 15-22 GodGunsGold Smith & Wesson M&P 15-22 10 06-13-2019 03:48 PM
Fast moon clip reload.... 38 spl cast reload help? gehlsurf Reloading 15 02-27-2019 01:20 AM
New MP 15-22 Setup LouisJXn Smith & Wesson M&P 15-22 5 10-16-2014 09:28 PM
My first red dot - setup help please. cclark89 Smith & Wesson M&P 15-22 16 08-17-2012 07:31 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 09:50 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)