Smith & Wesson Forum

Advertise With Us Search
Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 01-23-2021, 10:11 PM
Eddietruett Eddietruett is offline
Member
Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS?  
Join Date: Dec 2016
Location: South Carolina
Posts: 1,713
Likes: 1,054
Liked 3,520 Times in 961 Posts
Default Anyone else having problems with Dillon CS?

For years I have raved about the Customer Service at Dillon. Could not imagine a company doing any better. Until now. Been trying to get some parts. Since it is parts they have replaced before under warranty, I started with technical support. Waited 1st time over an hour on hold. Never got below 20 in the que. tried sales. Basically the same thing. Tried ordering online and couldn’t get order to place. Next day tried sales again. This time recording said wait time app 15 minutes but suggested they call me back and not lose place in line. They called me 3 hours later. Bad connection so got cut off. Nest day finally reached a person. Said their que is at least 50 deep 15 minutes after opening. Took my order. Promised it would ship in 48 hours. 3+weeks ago and still no parts. No way to check on orders. Sent email a week ago. No response yet. Now I’m aware everyone is swamped but if you are that backed up why not get some more people? I’ve got 4-5 buddies here in SC that have stuff on order and seen nothing in a month. Anyone hear having problems. I’d feel better knowing they did ship and it was lost in shipping. Quickly losing faith in my favorite company
Reply With Quote
  #2  
Old 01-23-2021, 11:25 PM
muddocktor's Avatar
muddocktor muddocktor is offline
Member
Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS?  
Join Date: Oct 2014
Location: South Louisiana
Posts: 5,346
Likes: 11,606
Liked 9,019 Times in 3,193 Posts
Default

I haven't had to deal with them lately, myself. Please keep us updated on your progress with receiving your order. I hate to hear that a company I have used and trusted over the years giving poor customer service now.
Reply With Quote
The Following User Likes This Post:
  #3  
Old 01-23-2021, 11:39 PM
Scharfschuetzer's Avatar
Scharfschuetzer Scharfschuetzer is offline
Member
Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS?  
Join Date: Jan 2014
Location: Puget Sound Area
Posts: 888
Likes: 39
Liked 2,388 Times in 649 Posts
Default

I've always been treated well by the CS at Dillon since buying my first press in 1982 or so. I'll bet that reloading this year is hitting an all time hi and producing a massive call on products and customer service.
__________________
Keep your powder dry.
Reply With Quote
The Following 2 Users Like Post:
  #4  
Old 01-23-2021, 11:46 PM
growr growr is offline
Member
 
Join Date: Nov 2006
Location: Montana
Posts: 5,164
Likes: 3,441
Liked 6,258 Times in 2,063 Posts
Default

Always been top notch for me.......

Randy
Reply With Quote
The Following 2 Users Like Post:
  #5  
Old 01-24-2021, 12:35 AM
199 199 is offline
Member
Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS?  
Join Date: Feb 2010
Posts: 32
Likes: 1
Liked 46 Times in 18 Posts
Default

I understand Dillon is having enormous problems with orders and shortages and such.

Surprisingly, I ordered some stuff off their website on 1/18. Got an e-mail from Dillon that it was shipped on 1/22 via Fed Ex with a tracking number which indicates it will be delivered on 1/27!

Granted, no Dillon customer service or other personal contact was involved – I just created an account on their website and ordered from there. Also, I was looking for .41 Magnum related parts, which is a fairly unpopular caliber. This might explain the quick service.

Does seem like they could get some extra help, but maybe the issue is getting new people who know what they’re talking about?

In fairness, everything is messed up right now. We are going through a perfect storm of disasters. I doubt this is simply an issue of poor customer service.

Still, it’s certainly frustrating not being able to get your press up and running in the middle of a severe ammunition shortage!!
Reply With Quote
The Following 4 Users Like Post:
  #6  
Old 01-25-2021, 08:24 PM
Eddietruett Eddietruett is offline
Member
Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS?  
Join Date: Dec 2016
Location: South Carolina
Posts: 1,713
Likes: 1,054
Liked 3,520 Times in 961 Posts
Default

I agree that there is a problem with all of the "shortages" but I can't understand a company not having or getting enough people to handle calls and emails. It is absolutely ridiculous not to return an email for over a week and on top of that if shipping is going to be delayed, the customer should be told the truth not its shipping tomorrow if it is actually not. Of course my credit card was charged the same day.
Reply With Quote
  #7  
Old 01-25-2021, 08:27 PM
Geronimo Jim's Avatar
Geronimo Jim Geronimo Jim is offline
Member
Anyone else having problems with Dillon CS?  
Join Date: Apr 2006
Location: West Virginia
Posts: 1,783
Likes: 3,808
Liked 3,148 Times in 899 Posts
Default

When you hire new people who is going to take time to train them?
And how long will it take? As far as shipping I know of at least
7 or 8 items taking one month to go from point a to point b on the
east coast. Maybe not all dillon?
Reply With Quote
The Following 5 Users Like Post:
  #8  
Old 01-25-2021, 09:05 PM
Abflyboy Abflyboy is offline
Member
 
Join Date: Jan 2009
Posts: 338
Likes: 1,109
Liked 255 Times in 131 Posts
Default

I highly doubt that Dillon is making a deliberate decision to reduce the quality of customer service.

Lots of different places have been hit hard this last year and if they were one of thousands who closed down for a period of time and then have been short staffed since, there is a very high likelihood that previous orders are massively back logged.

I also doubt they would even consider using temporary staff since you don't just walk in to a place like that and instantly become a knowledgeable tech, sales, or service representative when they have loyal, faithful employees waiting to come back to work. So the people who are there are stuck 'supervising' and not able to get their own jobs done.

I could keep going ...
Reply With Quote
  #9  
Old 01-25-2021, 09:37 PM
6string's Avatar
6string 6string is online now
Member
Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS? Anyone else having problems with Dillon CS?  
Join Date: Mar 2012
Location: Upstate, SC
Posts: 2,029
Likes: 3,122
Liked 4,806 Times in 1,538 Posts
Default Keep an eye on the big picture!

I hope the situation improves.
Personally, I hate ordering by phone if I even suspect I'll have to listen to automated messages or horrible muzak (Yecch!). I want a live human to pick up.
But, I digress....

There's a lot of factors at play.
The entire industry is experiencing an unprecedented "feeding frenzy". This is not going to be the nature of the market, long term speaking. Decisions made now are things that will have an impact later when the market cools. There is no winning solution, given the circumstances.
Since Dillon is both a manufacturer and seller the problems are even bigger.
Here's some of the choices for Dillon, and others:
-Invest in tooling, capacity and personnel now, not based on market growth over the long term, but on immediate conditions. This is always a mistake! The result will be loss of capital and eventually lay-offs. Worst case: bankruptcy.

-Outsource customer service and perhaps production (can you say "Made in China"?). This will result in a negative impact on quality.

-Sell out to some horrible conglomerate where Dillon becomes yet another subsidiary holding along with a bunch of other brands.

-Prioritize and streamline sales and services to essential and in-house products. (i.e.: get rid of the "tacticool" nick-nacks, and third market gadgets, and focus strictly on Dillon products and services.)
This hurts their "easy" profit margin areas (much like popcorn at the movies), but is a good "back to basics" approach.

Personally, I think the last choice is the "least bad choice". They obviously need to have a sit-down meeting and deal with the issues. They shouldn't be charging credit cards at least until they're ready to package an order.

Finally, keep in mind that the policies around the China virus
are, at least partially, intended to hurt free market capitalism, and are symptomatic of other long term policies. (Ever wonder what happened to the Mom & Pop LGS?) Is it even possible for Dillon to hire people to answer the phones more efficiently? I mentioned earlier the "feeding frenzy". This is not an accident. This is part of the "chaos" strategy intended to bankrupt certain industries.

One more thought:
Some of us still know how to use a pen and paper. The Dillon Blue Press always has a paper order form. Why not mail it in "old school" style, with a check enclosed? Or, write them a letter to complain about their customer service.
I do this to my elected representatives all the time.
Believe it or not, but it gets results!
Reply With Quote
  #10  
Old 01-25-2021, 09:47 PM
cmj8591's Avatar
cmj8591 cmj8591 is offline
Member
Anyone else having problems with Dillon CS?  
Join Date: Jul 2007
Location: Massachusetts, USA
Posts: 2,811
Likes: 1,187
Liked 4,570 Times in 1,643 Posts
Default

Everything is in flux right now. It's easy to say hire more people but the problem is not that simple. Just about every company has the help wanted sign out and there's no one around who wants to work. Add to that the postal and delivery system working on a wing and a prayer and everything moves like mud. I just spent 2 months waiting for $10 worth of chainsaw parts from a place that usually has my order to me within 5 days. They had to wait, I had to wait, we're all waiting right now. Dillon is a top notch company but I'm sure that they're up against it too. Everything I've ever gotten from them has been top quality and whenever I've needed anything they have been more than accommodating. Patience is the order of the day and is going to be for some time.
Reply With Quote
  #11  
Old 01-26-2021, 01:35 PM
SLT223's Avatar
SLT223 SLT223 is offline
Member
Anyone else having problems with Dillon CS?  
Join Date: Jan 2009
Posts: 3,309
Likes: 2,724
Liked 5,054 Times in 1,442 Posts
Default

They have a pop up on their webpage that tells you they are hammered with calls and orders. I take that to mean we should expect delays and in response time and order processing. Parcel delivery service ain't doing to hot either right now. I want a couple conversion kits for me 650, but I plan to save myself the aggravation until thing calm down, or they get caught up. These are unprecedented times for demand of all thing firearms and ammunition.
Reply With Quote
Reply


Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Encountered problems with my Dillon 550B yesterday lrrifleman Reloading 18 11-09-2017 08:10 PM
SOLD****.32 HR Mag brass, .32 Dillon Carbide dies .32 Dillon 550 Conv kit. 03Fatboy Accessories/Misc - For Sale or Trade 3 10-20-2017 11:56 PM
anyone else have problems with AA#5 in a Dillon powder measure? Lou_NC Reloading 8 01-10-2015 11:25 AM
ANY PROBLEMS WITH WINCHESTER PRIMERS IN A DILLON 650? chief38 Reloading 18 01-10-2014 02:56 PM
Dillon 550B Primer Problems dwpmusic Reloading 42 11-26-2012 10:35 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 05:14 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)