|
|
02-27-2009, 07:50 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2007
Location: Alabama
Posts: 893
Likes: 351
Liked 433 Times in 215 Posts
|
|
In the past I have worked up the OAL for a rifle cartridge by barely seating the bullet in the case and repeatedly trying to chamber it until the bolt will close easily. I have also polished the bullet with steel wool and chambered it till I could see the rifling marks on the bullet and then backed off whatever distance I wanted. What methods do you guys use to determine or measure at what point your bullet contacts the rifling or how far off the rifling you seat your bullets?
__________________
War Eagle!!!
|
02-27-2009, 07:50 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2007
Location: Alabama
Posts: 893
Likes: 351
Liked 433 Times in 215 Posts
|
|
In the past I have worked up the OAL for a rifle cartridge by barely seating the bullet in the case and repeatedly trying to chamber it until the bolt will close easily. I have also polished the bullet with steel wool and chambered it till I could see the rifling marks on the bullet and then backed off whatever distance I wanted. What methods do you guys use to determine or measure at what point your bullet contacts the rifling or how far off the rifling you seat your bullets?
__________________
War Eagle!!!
|
02-27-2009, 08:22 AM
|
Member
|
|
|
Join Date: Aug 2008
Location: france
Posts: 211
Likes: 80
Liked 90 Times in 43 Posts
|
|
the rifle empty
close the bolt ,enter a cleaning rod untill its' touching the face of the bolt ,mark the road
then put the bullet touching the lands
enter the road ,mark when it touch the bullet
the difference in the 2 marks on the road is the MAX length of the cartridge whith this bullet
stay the gun in a rest ,an a little piece of wood to push the bullet in the lands.
hope i can help
regards
ANDRE
|
02-27-2009, 08:23 AM
|
Member
|
|
|
Join Date: Aug 2007
Location: Oklahoma
Posts: 8,158
Likes: 3,605
Liked 5,199 Times in 2,172 Posts
|
|
Yes, I did some of that when I only had one rifle.
Now that there are several rifles of the same caliber in the family, I load to SAAMI standards with quality components, and all the hunting rifles seem to like it fine.
__________________
Science plus Art
|
02-27-2009, 02:43 PM
|
Member
|
|
|
Join Date: Oct 2002
Location: texas
Posts: 11
Likes: 0
Liked 0 Times in 0 Posts
|
|
The steel wool method with a loupe or magnifying glass is the most reliable and foolproof. I've used all the tools and I go back to the steel wool method.
|
02-27-2009, 03:21 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2007
Location: Colorado
Posts: 1,521
Likes: 33
Liked 249 Times in 118 Posts
|
|
Sir, FWIW, I like to keep the bullet at least 10 thousandths off the lands in my match rifles. I use the Stoney Point tool and a Sinclair comparator.
Hope this helps, and Semper Fi.
Ron H.
__________________
Wishin' don't make it so.
|
02-27-2009, 05:30 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2007
Posts: 936
Likes: 9,932
Liked 1,800 Times in 329 Posts
|
|
To see the rifling marks easily on the bullet use a magic marker in black to paint the contact area. Repeat as necessary.
|
02-27-2009, 06:19 PM
|
Member
|
|
|
Join Date: Dec 2007
Location: North Central Iowa
Posts: 11
Likes: 0
Liked 0 Times in 0 Posts
|
|
I resize a empty case and lightly seat a bullet and cycle the action, measure the lenth, set my dies accordling. Has always worked for me.
|
02-27-2009, 07:08 PM
|
Member
|
|
|
Join Date: Mar 2008
Location: ohio
Posts: 50
Likes: 0
Liked 0 Times in 0 Posts
|
|
you could get a stony point bullet comparitor and take out all the guess work
Dave.
|
02-28-2009, 05:04 AM
|
Member
|
|
|
Join Date: Feb 2008
Location: Fayetteville, Arkansas
Posts: 279
Likes: 0
Liked 2 Times in 2 Posts
|
|
I use the bullet comparator and OAL gauge purchased from Sinclair. It removes all guess work. IMHO it is the way to go.
|
02-28-2009, 11:07 AM
|
|
US Veteran
|
|
|
Join Date: Aug 2006
Location: West Central IL
Posts: 22,758
Likes: 18,437
Liked 22,313 Times in 8,245 Posts
|
|
+1 on the OAL gauge, but it is now owned and marketed by Hornady. It is a simple and sure way to find the max OAL. BUT, may not result in the most accurate load. Once you have determined the max OAL, load 5 rounds at that, then 5 rounds at .005less, .010 less, .015 less, .020 less etc. then shoot each group from a solid benchrest at 100 yards and you will find the most accurate seating depth for your gun. Keep in mind that if your gun loads from a magazine the OAL must properly clear the magazine. I have found that my rifles "sweet spot" is usually .005" to .010" shy of the rifling.
__________________
H Richard
SWCA1967 SWHF244
|
02-28-2009, 11:40 AM
|
Member
|
|
|
Join Date: Feb 2007
Location: vermont
Posts: 2,015
Likes: 375
Liked 717 Times in 376 Posts
|
|
i believe brownells or midway sells chamber casting material if you wish to go that route.
|
03-01-2009, 07:14 AM
|
|
US Veteran
|
|
|
Join Date: Oct 2007
Location: Alabama
Posts: 893
Likes: 351
Liked 433 Times in 215 Posts
|
|
Thanks for all the replies. Good information there and most helpful.
__________________
War Eagle!!!
|
03-01-2009, 01:57 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Lafayette, Tennessee
Posts: 6,926
Likes: 6,833
Liked 8,936 Times in 2,910 Posts
|
|
For hunting applications, I usually load them to the maximum overall length found in my loading manual. A lot of my reloads might end up in more than one rifle.
For maximum accuracy, I experiment with different OALs. Somtimes they make a big difference. Some rifles like them longer, some shorter.
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|