|
|
|
07-24-2021, 01:35 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,673
Likes: 5,938
Liked 11,970 Times in 2,987 Posts
|
|
I’m finally getting into casting
I’ve been talking about it for a long time, but with covid making everything difficult to get, high prices, etc., I was putting it off. I had been looking to buy up a bunch of equipment and supplies on the used market, but all the used merchandise seemed to disappear off the classifieds and boards once covid got into full swing. Anyway, I finally found a good used lot of supplies and equipment for a price that I can live with. I’ll have to go through it, but it looks like I made out pretty well. It includes two Lee pots, several molds, most new, and all with handles, sizing dies, lube, a tumbler for powder coating(haven’t tried that method yet), and several hundred pounds of processed lead. I’ll have a better idea once I go through everything and weigh the lead.
__________________
USS Brewton FF1086
SWCA#3597
|
The Following 15 Users Like Post:
|
AlHunt, boatbum101, Carrier, Erocksmash, Frank46, Golphin, Jessie, k22fan, KFW, krsmith58, lrrifleman, RobertJ., SS336, Trooperdan, vinn |
07-24-2021, 02:12 PM
|
|
Member
|
|
|
Join Date: Nov 2004
Location: Northwest Alabama, USA
Posts: 1,604
Likes: 366
Liked 1,912 Times in 682 Posts
|
|
IMHO, casting adds as much to the shooting sports as does reloading. It's a whole new level when you can make your own bullets that are as good or better than factory offerings at a fraction the cost (once you have the equipment). If you don't already have it, get yourself a copy of the Lyman cast bullet handbook. Toms of good info. Also check out castboolits.com for another great resource. Good luck, and have fun!
|
The Following 6 Users Like Post:
|
|
07-24-2021, 03:31 PM
|
Member
|
|
|
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 999 Times in 536 Posts
|
|
+ 1 on cast boolit forum , it is a virtual treasure trove of knowledge . Like here it too is inhabited with some amazing & kind folks . It has become increasing harder to find good consistent alloy . Good thing most handgun chores can be done with reclaimed range lead .
|
The Following 4 Users Like Post:
|
|
07-24-2021, 03:44 PM
|
|
Member
|
|
|
Join Date: Oct 2015
Location: Kentucky
Posts: 245
Likes: 413
Liked 210 Times in 115 Posts
|
|
Congratulations on getting started casting. I started just this past December. That Lyman book has a lot of cast bullet data, but it’s for mostly older powders.
David
|
The Following User Likes This Post:
|
|
07-24-2021, 04:15 PM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,874
Likes: 7,481
Liked 8,133 Times in 3,678 Posts
|
|
Lyman Cast Bullet Handbook
The latest edition is #4 , if you can get a #3 edition do so ... it has a lot of good older information that still applies .
Before you rush in ... Read the Information and How To chapters in front of each manual ... pay attention to what is written .
You save a lot of time and frustration by not making all the mistakes a newbe does . ... These Manuals are worth their weight in wisdom gold and not just for the load data in the last chapters .
In fact the most information you need is the chapters in front of the load data ... trust me .
In the 4th Edition ... Read the First Eighteen Chapters ... before you plug in a pot ! Your learning curve will be much shorter .
Gary
Casting since 1967
__________________
Certified Cajun
NRA Member
|
The Following 7 Users Like Post:
|
|
07-24-2021, 04:22 PM
|
Member
|
|
|
Join Date: Jun 2014
Posts: 2,349
Likes: 5,455
Liked 2,773 Times in 1,260 Posts
|
|
Quote:
Originally Posted by tlawler
I’ve been talking about it for a long time, but with covid making everything difficult to get, high prices, etc., I was putting it off. I had been looking to buy up a bunch of equipment and supplies on the used market, but all the used merchandise seemed to disappear off the classifieds and boards once covid got into full swing. Anyway, I finally found a good used lot of supplies and equipment for a price that I can live with. I’ll have to go through it, but it looks like I made out pretty well. It includes two Lee pots, several molds, most new, and all with handles, sizing dies, lube, a tumbler for powder coating(haven’t tried that method yet), and several hundred pounds of processed lead. I’ll have a better idea once I go through everything and weigh the lead.
|
Looks and sounds like you're off to the races.
3 things:
Clean mold
Clean Alloy
Plenty of heat
Get those 3 things right and it's harder to drop bad bullets than good. A hot mold is a happy mold.
__________________
Just Say No - To Social Media
|
The Following 4 Users Like Post:
|
|
07-24-2021, 05:35 PM
|
Member
|
|
|
Join Date: May 2016
Location: 30min SE Montreal
Posts: 2,026
Likes: 150
Liked 1,540 Times in 841 Posts
|
|
WARNING:while casting bullets is not dangerous for your health if proper safety measures and ventilation are used,you must be warned that it is highly addictive and may lead you to excessive expenses for the acquisition of moulds,sizers and other such specialized equipment(some of them customized to your own specs) which expenses might lead your spouse to extremes such as divorce.
|
The Following User Likes This Post:
|
|
07-24-2021, 05:47 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,673
Likes: 5,938
Liked 11,970 Times in 2,987 Posts
|
|
I think I made quite the haul! Here’s the final tally:
645 lb. processed lead half pure and half 92/6/2 alloy all in ingots
2 Lee 4-20 melting pots
8 Lee six cavity molds, .356 and .452 with handles
4 Lee sizing dies
Bulge buster kit
2 Lee ingot pans
1 RCBS analog lead thermometer
Harbor Freight tumbler with 2 lb. Eastwood powder coat
Respirator with new cartridges and spares
Couple of buckets full of tools, lube, fluxing stuff, etc.
And can’t forget the 12 hdx containers.
And I got all that for $1000...how did I do?
ETA: And about half of the stuff is still new in the box!
__________________
USS Brewton FF1086
SWCA#3597
Last edited by tlawler; 07-24-2021 at 05:50 PM.
|
The Following 6 Users Like Post:
|
|
07-24-2021, 05:54 PM
|
Member
|
|
|
Join Date: Sep 2014
Location: IA
Posts: 1,727
Likes: 992
Liked 1,627 Times in 800 Posts
|
|
The lead alone is worth $700 to $800. The rest depends on condition. Assuming the 8 six cavity molds are in good condition there’s another $200. Assuming the pots work OK they should be at least $50 each.
|
The Following User Likes This Post:
|
|
07-24-2021, 08:01 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,673
Likes: 5,938
Liked 11,970 Times in 2,987 Posts
|
|
Quote:
Originally Posted by reddog81
The lead alone is worth $700 to $800. The rest depends on condition. Assuming the 8 six cavity molds are in good condition there’s another $200. Assuming the pots work OK they should be at least $50 each.
|
One pot and 5 of the molds are still new in box as well as all of the dies and bulge buster. Other molds look nearly new. I think lead is going for $2.50-$3 a lb. from what I’ve seen on ebay and elsewhere.
__________________
USS Brewton FF1086
SWCA#3597
|
07-24-2021, 08:05 PM
|
Member
|
|
|
Join Date: Nov 2020
Location: Texas
Posts: 1,103
Likes: 341
Liked 966 Times in 534 Posts
|
|
What mounds did you get? I’ve been casting bullets since I was 12 years old……… I’m 63 now. Any questions you can PM me.
|
The Following User Likes This Post:
|
|
07-24-2021, 08:21 PM
|
Member
|
|
|
Join Date: Jun 2014
Posts: 2,349
Likes: 5,455
Liked 2,773 Times in 1,260 Posts
|
|
Quote:
Originally Posted by tlawler
I think I made quite the haul! Here’s the final tally:
645 lb. processed lead half pure and half 92/6/2 alloy all in ingots
2 Lee 4-20 melting pots
8 Lee six cavity molds, .356 and .452 with handles
4 Lee sizing dies
Bulge buster kit
2 Lee ingot pans
1 RCBS analog lead thermometer
Harbor Freight tumbler with 2 lb. Eastwood powder coat
Respirator with new cartridges and spares
Couple of buckets full of tools, lube, fluxing stuff, etc.
And can’t forget the 12 hdx containers.
And I got all that for $1000...how did I do?
ETA: And about half of the stuff is still new in the box!
|
Basically, you bought 500 pounds of lead and got the rest for free.
Nice score.
__________________
Just Say No - To Social Media
|
The Following 5 Users Like Post:
|
|
07-24-2021, 08:22 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,673
Likes: 5,938
Liked 11,970 Times in 2,987 Posts
|
|
Quote:
Originally Posted by Ruger 1,3
What mounds did you get? I’ve been casting bullets since I was 12 years old……… I’m 63 now. Any questions you can PM me.
|
3 different moulds, but duplicates...356-120-TC, 356-124-TC, and 452-230-TC. That should take care of 9mm, 357sig, 38super 45ar and 45acp. I’ll add other moulds as I can.
Thank you for the offer of help...I know I’m going to need some.
__________________
USS Brewton FF1086
SWCA#3597
|
The Following User Likes This Post:
|
|
07-24-2021, 08:30 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2012
Location: E. Washington State
Posts: 5,493
Likes: 1,325
Liked 10,596 Times in 3,227 Posts
|
|
Casting is just what makes your reloads even cheaper and can make you
feel like you don't need anything but primers, power and brass to be as good as anything that is being sold.
I even cast HP .45 ACP, one at a time but I like how they turn heads
when showing them off and shooting them....
__________________
Only difference Fool/Mule-ears
|
The Following User Likes This Post:
|
|
07-24-2021, 08:35 PM
|
|
US Veteran
|
|
|
Join Date: Nov 2008
Location: Colorado
Posts: 7,520
Likes: 19,278
Liked 32,371 Times in 5,476 Posts
|
|
Bullet casting is probably the most interesting part of the shooting sports in my opinion. So much to learn!
By all means, get the Lyman Handbooks and make a thorough study of everything before you begin. If you can find a copy of "Cast Bullets" an NRA publication by Col. E.H. Harrison you will be even further ahead of the curve, benefiting from about 20 years of intensive research and development work, lots of Q&A on specifics.
Good ventilation is an absolute must! All of my casting is done under a covered patio or in a garage with the overhead door open.
|
The Following 2 Users Like Post:
|
|
07-24-2021, 08:41 PM
|
Member
|
|
|
Join Date: Jan 2008
Location: Harlem, Ohio
Posts: 14,427
Likes: 23,431
Liked 26,311 Times in 9,122 Posts
|
|
The Ideal and Lyman were making casting and loading equipment when Mr. Lee was just a gleam in his dad's eye!
Get either the Lyman Cast Bullet hand book 3rd or 4th edition OR the Lyman Loading Manual 46 edition is about 1980 and has most of the Cast Handbook info in it! I have #48 & #49, newer powders & cartridges, less real info!
Since you now have the means, learn to cast, then learn about sizing and Lubing. Then worry about loading data, you'll have to go with whatever powder is available anyway!
Ivan
+1 big time on good ventilation!
Last edited by Ivan the Butcher; 07-24-2021 at 08:42 PM.
|
The Following 2 Users Like Post:
|
|
07-24-2021, 08:46 PM
|
|
Member
|
|
|
Join Date: Aug 2005
Location: Gun lovin\' Hollywood Ca.
Posts: 10,238
Likes: 7,741
Liked 18,707 Times in 3,792 Posts
|
|
Darn...I clicked on this thread hoping to get a part in a movie!
__________________
Thirty characters. Exactly...
|
The Following User Likes This Post:
|
|
07-24-2021, 09:37 PM
|
Member
|
|
|
Join Date: Jan 2001
Location: In The Woods Of S.C.
Posts: 8,904
Likes: 14,041
Liked 13,744 Times in 4,982 Posts
|
|
Wait you get the satisfaction of killing a deer with a bullet you made. Then you are truly independent.
__________________
S&W Accumulator
|
The Following 2 Users Like Post:
|
|
07-24-2021, 09:50 PM
|
|
SWCA Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,580
Likes: 3,066
Liked 22,564 Times in 5,845 Posts
|
|
You got a nice haul there
I need to get back into casting
It has been a while since I melted any lead, but that has not stopped me from buying molds
__________________
"Acta non verba"
|
The Following 2 Users Like Post:
|
|
07-24-2021, 10:06 PM
|
|
Member
|
|
|
Join Date: Jul 2017
Location: Pittsburgh PA
Posts: 1,764
Likes: 1,648
Liked 3,117 Times in 1,014 Posts
|
|
Everyone talks about casting to save money but next thing you know you have thousands of dollars worth of molds and supplies.
__________________
-Matt
|
The Following 7 Users Like Post:
|
|
07-24-2021, 10:43 PM
|
Member
|
|
|
Join Date: Sep 2014
Location: IA
Posts: 1,727
Likes: 992
Liked 1,627 Times in 800 Posts
|
|
Quote:
Originally Posted by tlawler
One pot and 5 of the molds are still new in box as well as all of the dies and bulge buster. Other molds look nearly new. I think lead is going for $2.50-$3 a lb. from what I’ve seen on ebay and elsewhere.
|
You can find lead under the $1.50 range if you’re patient. I scan armslist and Craigslist once a week or so and buy some once or twice a year. If you need lead delivered to your door ASAP there’s often someone on castboollits with some for sale. Last week a guy was selling for $1.50 per pound plus shipping.
Even valuing lead at $1 per pound that was a really good deal.
|
The Following User Likes This Post:
|
|
07-25-2021, 07:31 AM
|
Member
|
|
|
Join Date: Nov 2020
Location: Texas
Posts: 1,103
Likes: 341
Liked 966 Times in 534 Posts
|
|
May I also suggest that you join the Cast Boolits forum. My username over there is smithnframe. Looking forward to seeing you!
|
The Following User Likes This Post:
|
|
07-25-2021, 08:12 AM
|
|
SWCA Member
|
|
|
Join Date: May 2021
Location: Bluegrass State
Posts: 76
Likes: 199
Liked 218 Times in 30 Posts
|
|
Wow , that was a great score. I started casting about 3 years ago and it is very enjoyable. I powder coat all my bullets as well and they shoot great. I don't know if you mentioned sizing, but you will need some sizing dies as well. Good luck with it and enjoy your new hobby.
|
The Following User Likes This Post:
|
|
07-25-2021, 09:16 AM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: S.E. Iowa
Posts: 679
Likes: 288
Liked 731 Times in 309 Posts
|
|
I cast a lot of bullets back in the 70s. I would hit every tire outlet repair store and they would always give me their old wheel weights. Linotype was also readily available too. I sold all my casting equipment years ago when I found I could buy excellent lead bullets for reasonable prices. I stock piled lead bullets by the thousands and have plenty left.
|
The Following User Likes This Post:
|
|
07-25-2021, 09:57 AM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,874
Likes: 7,481
Liked 8,133 Times in 3,678 Posts
|
|
Quote:
Originally Posted by AlHunt
Looks and sounds like you're off to the races.
3 things:
Clean mold
Clean Alloy
Plenty of heat
Get those 3 things right and it's harder to drop bad bullets than good. A hot mold is a happy mold.
|
And Lube the mould , especially the block tops , underside of spue plate and hinges , pivot points and pins ... Synthetic 2-Cycle Oil works best .
Gary
__________________
Certified Cajun
NRA Member
Last edited by gwpercle; 07-25-2021 at 09:58 AM.
|
The Following User Likes This Post:
|
|
07-25-2021, 09:57 AM
|
Member
|
|
|
Join Date: Feb 2010
Location: Wyoming
Posts: 6,172
Likes: 6,392
Liked 7,083 Times in 3,003 Posts
|
|
I am getting out of casting and shot making. Partly for health reasons. Just too much stuff around . I must have 5-6 tons of lead, couple hundred pounds of tin etc. Going to keep 3 molds for JIC but the shotmakers are going to the big auction house in the sky soon. I made much shot. Most of the lead is going to the scrap yard as lead is over a dollar a pound. The hard stuff is gonna go on Cast Boolits or somewhere. Birtjday coming up soon...most of my best shooting days are done.
|
The Following 2 Users Like Post:
|
|
07-25-2021, 10:03 AM
|
|
Member
|
|
|
Join Date: Nov 2011
Location: Baton Rouge, La.
Posts: 6,874
Likes: 7,481
Liked 8,133 Times in 3,678 Posts
|
|
I hear you Skeet ... My best days were 40 years ago ... half blind now but just ain't ready to call it quits .
The Lord might have a Shooting Range in Heaven ... I'm going to see if I can take some of my "stuff" with me !
Gary
__________________
Certified Cajun
NRA Member
|
The Following 3 Users Like Post:
|
|
07-25-2021, 10:15 AM
|
Member
|
|
|
Join Date: Feb 2010
Location: Wyoming
Posts: 6,172
Likes: 6,392
Liked 7,083 Times in 3,003 Posts
|
|
Quote:
Originally Posted by gwpercle
I hear you Skeet ... My best days were 40 years ago ... half blind now but just ain't ready to call it quits .
Gary
|
Yeah I was more than half blind had a bit of eye surgery and can see much better now but trying to be more careful with eyesight these days. I can still break and occcasional hundred straight but haven't done it with my favorite(the 410) in 5 years. Our day in the sun is fleeting as they say.. I could even hit a few PDs with a handgun(S&W M 28) up to a 100 yds at one time. Doubt I can even see 'em that far without a scope anymore
|
The Following 2 Users Like Post:
|
|
07-25-2021, 10:31 AM
|
|
Member
|
|
|
Join Date: Apr 2012
Location: Houston, TX
Posts: 3,720
Likes: 1,602
Liked 6,317 Times in 2,296 Posts
|
|
I too quit casting some time ago. I cast my own for 10 years or so but got married, had kids, bought a house. Casting took as much time as reloading and shooting put together. These days metal isn't mostly free anymore on a widespread basis.
I still have the equipment though. One of these shortages I may have to break it out. But so far I've been able to buy bullets when I've needed them. I still buy an occasional mold if I see a "deal". A year or so ago a Lee .41 full wadcutter mold (Lee 41-200-WC) popped up on eBay with a very reasonable "buy it now". Fortunately I got to it first.
I haven't had a chance to use it yet. My living situation at the moment won't allow for casting but I might go stay with one of my kids for a bit and cast some of those up.
|
The Following User Likes This Post:
|
|
07-25-2021, 11:00 AM
|
|
Member
|
|
|
Join Date: Mar 2009
Location: Baton Rouge La.
Posts: 199
Likes: 1,975
Liked 103 Times in 59 Posts
|
|
I think you made out like a bandit.
|
The Following User Likes This Post:
|
|
07-25-2021, 11:29 AM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,673
Likes: 5,938
Liked 11,970 Times in 2,987 Posts
|
|
Thanks to everyone for all the information and advice. I still have quite a bit of setting up and reading to do before I melt my first pot. I wasn’t really ready, shop and space wise, to jump right in anyway. But when a deal came up, I jumped on it.
I have a question about lead storage. To maximize space, I need to consolidate the ingots. It came in 10 hdx buckets that were 1/3 or so filled due to weight, but I want to store it on some lower shelves in my garage. It will be exposed to normal South Florida garage conditions and is in the opposite corner from my house a/c system. Should I line the shelf first?’ And should I keep them covered and somewhat sealed? Or is just bare on the shelf ok?
__________________
USS Brewton FF1086
SWCA#3597
|
The Following User Likes This Post:
|
|
07-25-2021, 01:00 PM
|
Member
|
|
|
Join Date: Feb 2020
Location: lockhart, texas
Posts: 143
Likes: 12
Liked 253 Times in 79 Posts
|
|
I have been reloading my own ammo & casting my own bullets since I was 20 years old. I'm almost 76 now, and although Lee molds will get you started without spending a bunch of money, I prefer iron molds. I do have a few Lee molds, but most of my casting is done with Lyman & RCBS iron molds. With proper care, they last MUCH longer than aluminum molds. Just my opinion, and it cost you nothing to read it.
|
The Following User Likes This Post:
|
|
07-25-2021, 01:33 PM
|
Member
|
|
|
Join Date: Nov 2005
Location: San Diego, California
Posts: 387
Likes: 101
Liked 292 Times in 127 Posts
|
|
Quote:
Originally Posted by Skeet 028
I am getting out of casting and shot making. Partly for health reasons. Just too much stuff around . I must have 5-6 tons of lead, couple hundred pounds of tin etc. Going to keep 3 molds for JIC but the shotmakers are going to the big auction house in the sky soon. I made much shot. Most of the lead is going to the scrap yard as lead is over a dollar a pound. The hard stuff is gonna go on Cast Boolits or somewhere. Birtjday coming up soon...most of my best shooting days are done.
|
I am truly sorry to hear about your health issues, I hate to see anyone who can't continue to enjoy the shooting passion to the extent that they like. May good fortune shine upon you.
|
The Following User Likes This Post:
|
|
07-25-2021, 01:48 PM
|
Member
|
|
|
Join Date: Nov 2005
Location: San Diego, California
Posts: 387
Likes: 101
Liked 292 Times in 127 Posts
|
|
I have been casting bullets since the early 1970's, I too prefer iron moulds over the aluminum. There are still deals to be had for casting equipment, much like the initial bargain. My favorite moulds were made by Hensley & Gibbs, I was truly fortunate to find quite a few in the $20 to $30 price range for four cavity moulds. I've also had good results with Saeco moulds. The remaining moulds are Lyman and RCBS. Casting makes you considerably more independent, since once you have alloy, you can reproduce any load. Best of luck to you and enjoy casting.
|
The Following User Likes This Post:
|
|
07-25-2021, 02:46 PM
|
|
SWCA Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,580
Likes: 3,066
Liked 22,564 Times in 5,845 Posts
|
|
Quote:
Originally Posted by Skeet 028
I am getting out of casting and shot making. Partly for health reasons. Just too much stuff around . I must have 5-6 tons of lead, couple hundred pounds of tin etc. Going to keep 3 molds for JIC but the shotmakers are going to the big auction house in the sky soon. I made much shot. Most of the lead is going to the scrap yard as lead is over a dollar a pound. The hard stuff is gonna go on Cast Boolits or somewhere. Birtjday coming up soon...most of my best shooting days are done.
|
I am sorry to hear this.
In my college days, I originally got into casting so that I could shoot more on my limited budget.
As things progressed over the years I continued because I enjoyed it. Also I can have molds made for bullets that are just not available or do not exist. I have bought into [a dozen or more group buys over on CastBoolits
I would be sad to give up my hobby because health issues forced me to
I understand that maintaining health is a must.
Are there no young family members that you can mentor in the Art of Casting? Perhaps he/she could keep you supplied in projectiles from those last molds
__________________
"Acta non verba"
|
The Following 3 Users Like Post:
|
|
07-25-2021, 03:25 PM
|
|
Member
|
|
|
Join Date: May 2012
Location: S. Orygun
Posts: 2,461
Likes: 1,963
Liked 1,827 Times in 987 Posts
|
|
I don't count costs for any of my handloads and have never done anything with my shooting "hobby" because it's "cheaper". There is a lot of satisfaction with reloading and a huge amount more from reloading your own cast bullets. Besides, it's fun. There are good texts and manuals and excellent forums (I joined castboolits in 2008 and have used info from the members many, many times). Of course the Lyman Cast Bullet Handbooks (I prefer the 3rd over the 4th) and many good texts are available. One excellent source of info is on the LASC site, "From Ingot To Target" Cast bullet reference on lead alloy's, min / max pressure, lube, shrinkage,.
You will get thousands of dire "warnings" about safely dealing with lead from using a fan to using a full haz-mat suit with PPE everything. Use common sense and you'll be fine. I have been casting bullets for 30 years and up until a few years ago had annual blood tests/physicals and lead levels were consistency normal. I started making sinkers when I was 12 on Ma's stove, 60+ years ago and never any "tensile fairy" visits or eruptions, just using common sense and thinking...
|
The Following User Likes This Post:
|
|
07-25-2021, 04:07 PM
|
|
Member
|
|
|
Join Date: Dec 2014
Location: North Dakota
Posts: 828
Likes: 2,294
Liked 1,189 Times in 438 Posts
|
|
If you keep the ingots covered surface oxidation will be minimized.
The cleaner the ingots the better.
And another aspect of the craft:
Learn to powder coat (PC). After running a Lyman Lube Sizer, powder
coat is the way to go. Not as messy, guns stay cleaner It's much
better.
__________________
never get out of the boat
|
The Following 2 Users Like Post:
|
|
07-25-2021, 04:49 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,673
Likes: 5,938
Liked 11,970 Times in 2,987 Posts
|
|
Quote:
Originally Posted by serger
If you keep the ingots covered surface oxidation will be minimized.
The cleaner the ingots the better.
And another aspect of the craft:
Learn to powder coat (PC). After running a Lyman Lube Sizer, powder
coat is the way to go. Not as messy, guns stay cleaner It's much
better.
|
That makes sense. I think I’ll cut a piece of visqueen to size to cover it and lay a piece of plywood over it and still have some shelf space for light items.
I have been powder coating for a few months now. I started buying “as-cast” bullets and PCing them and sizing.
__________________
USS Brewton FF1086
SWCA#3597
Last edited by tlawler; 07-25-2021 at 04:51 PM.
|
07-25-2021, 05:03 PM
|
Member
|
|
|
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
|
|
I've started casting my own as well. I've skipped lube and went straight to PC, however now I'm thinking of adding lube-a-master or lyman as well, cause my 700 grainers for 500 Mag just get too fat to fit into cylinder with PC.
|
The Following User Likes This Post:
|
|
07-26-2021, 04:01 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2014
Location: South West Florida
Posts: 4,673
Likes: 5,938
Liked 11,970 Times in 2,987 Posts
|
|
Here is what it looked like after stacking, less all the loose 1/2 lb. ingots. I had envisioned that stacked brick look like in Goldfinger, but it’s all good. I don’t think I’m going to have to worry about lead for awhile
__________________
USS Brewton FF1086
SWCA#3597
|
The Following 2 Users Like Post:
|
|
07-26-2021, 05:04 PM
|
Member
|
|
|
Join Date: Feb 2010
Location: Wyoming
Posts: 6,172
Likes: 6,392
Liked 7,083 Times in 3,003 Posts
|
|
I have 23 50 cal ammo cans with ingots in them. About 80 lbs each And as far as shot I have 6 -5 gal buckets full. More than 300 lbs each 2 each for 20-28-410 loads. At least a ton of #9 mag shot 9 cases of loaded 20 ga 6 cases of 28 and at least 10 cases of 410. Real cases not flats and haven't shot a round of real skeet in over a year and a half. Then I have a bunch of range lead and soft lead ingots picked up here and there. Even have over a 100 lbs of 50/50 lead tin solder from yard sales etc. When you lose your sight it is hard to shoot. I still shoot but nothing hard recoiling. I wish I had someone in the family to pass most of the reloading/casting stuff to pass it to..all the grandsons are back east making a life for themselves. I am taking pics this afternoon of molds etc I got in group buys on Cast Boolits and many from gun shows too. Most are unused or used very little. Been selling more than I have been buying in guns. already have disposition of my stuff set up for the future. Selling the casting stuff has been very hard for me to do...but it will have to go. I am trying to keep enough boolits and stuff to keep me shooting into the future however long or short it may be.
|
The Following 3 Users Like Post:
|
|
07-26-2021, 06:39 PM
|
|
Member
|
|
|
Join Date: Jan 2018
Location: So. Illinois
Posts: 2,609
Likes: 1,398
Liked 3,332 Times in 1,429 Posts
|
|
Quote:
Originally Posted by tlawler
Here is what it looked like after stacking, less all the loose 1/2 lb. ingots. I had envisioned that stacked brick look like in Goldfinger, but it’s all good. I don’t think I’m going to have to worry about lead for awhile
|
You'd be surprised how quickly you can go through it. Get some 6 cavity molds and that pot says "Feed Me".
|
The Following 2 Users Like Post:
|
|
07-27-2021, 06:58 AM
|
|
Member
|
|
|
Join Date: Jul 2017
Location: Pittsburgh PA
Posts: 1,764
Likes: 1,648
Liked 3,117 Times in 1,014 Posts
|
|
Quote:
Originally Posted by iouri
I've started casting my own as well. I've skipped lube and went straight to PC, however now I'm thinking of adding lube-a-master or lyman as well, cause my 700 grainers for 500 Mag just get too fat to fit into cylinder with PC.
|
Get a noe sizing die and you can dip lube then run the bullet through the sizer on your reloading press. It works well for small batches of bullets you don’t shoot all the time
__________________
-Matt
|
The Following 2 Users Like Post:
|
|
07-27-2021, 09:00 AM
|
Member
|
|
|
Join Date: Dec 2011
Posts: 1,149
Likes: 452
Liked 668 Times in 359 Posts
|
|
Quote:
Originally Posted by Dieseltech56
Get a noe sizing die and you can dip lube then run the bullet through the sizer on your reloading press. It works well for small batches of bullets you don’t shoot all the time
|
That's the sizing system I'm currently using Lee APP and Lee/NOE bushings. Good idea about pan lubing, since Lube-a-matic's are nowhere to be found.
|
The Following User Likes This Post:
|
|
07-27-2021, 09:24 AM
|
Member
|
|
|
Join Date: Feb 2010
Location: Wyoming
Posts: 6,172
Likes: 6,392
Liked 7,083 Times in 3,003 Posts
|
|
Got a Lube-a-matic a couple or 3 of older Lyman 45s and a Star sizer. The 45s are set up for single bullets and never changed. I will keep a couple of them but the Star and the RCBS are going to get sold. Talked to the metal dealer yesterday and it seems they are going to buy 2 tons of the ingots I have. (They are also taking a load of scrap iron with 'em when they come). They are gonna pick it up so it will all(well not all) be gone tomorrow. And I don't have to do anything except get the lead out of the garage. I woulda done it yesterday...but it was a 100 out there. LOL. Talked to another fellow and he wants a ton of the shot. . Now I can buy another S&W or two....well...maybe one. Gotta pay for the new heating/AC system we just had put in the house.. Got central heat so I don't have to cut near as much wood. That stuff ain't cheap these days.
|
The Following 2 Users Like Post:
|
|
07-27-2021, 10:40 AM
|
Member
|
|
|
Join Date: Feb 2007
Location: SW MT
Posts: 6,729
Likes: 10,497
Liked 6,018 Times in 2,964 Posts
|
|
A year or two back I realized I was down to under a ton of WW mix. Even though I am a few years short of 70 I think it's enough.
I PC some bullets but find i do most with a good lube and sizer.
__________________
Front sight and squeeze
|
The Following 2 Users Like Post:
|
|
08-08-2021, 01:11 AM
|
|
Member
|
|
|
Join Date: Feb 2005
Location: USA
Posts: 87
Likes: 3
Liked 65 Times in 29 Posts
|
|
I have only been casting for a few years. I am pleased that you can get into casting, or even reloading, with little cost. I can get by with a 20 pound Lee pot, three Keith molds, and three Lee push through sizers in my single stage press. I tumble lube with Lee liquid Alox and Johnson’s paste wax, 50-50. It seems to work fine for revolver under 1000 ft./s.
It doesn’t take a lot to make your own bullets. For ventilation, I only cast outside. Most of my lead is range scrap. We make things so complex, and I appreciate good tools, but you can really do a lot with a few simple tools.
Last edited by pmhayden; 08-08-2021 at 01:14 AM.
|
The Following User Likes This Post:
|
|
08-08-2021, 01:50 AM
|
US Veteran
|
|
|
Join Date: Sep 2010
Location: New Iberia, Louisiana
Posts: 4,588
Likes: 25,427
Liked 3,380 Times in 1,736 Posts
|
|
Started casting when I got out of the navy in 1967. All I use is wheelweights with 2% tin and never found a reason to change. There was a dump where I worked and the splicer crews used to clean out their trucks. Always would find partial bars of solder and the lead from cable. When I moved didn't know what to do with all that. Ended up stuffing ammo cans full of lead and solder. My favorite cast bullet rifle is a Finnish model 27 in 7.62x54r. Lymans 314299 is a natural in this rifle. Early on with load developement I found IMR 4759 was the powder in this rifle. So much so, I never tried anything else. Managed to squirrel enough to last until they shovel the dirt over me. And definitely check out the castbullets website. Well worth your time and effort. Frank
|
The Following User Likes This Post:
|
|
08-08-2021, 07:18 AM
|
|
US Veteran
|
|
|
Join Date: Apr 2021
Location: Florida
Posts: 3,760
Likes: 12,965
Liked 6,167 Times in 2,429 Posts
|
|
Develop a safe method for smelting and casting. No smoking( if you do) and Make Sure NO BEVERAGES anywhere close to lead pots. Being in Florida I try to cast in winter( if you can call it that) in garage with door open and large box fan to the side of pot blowing Out. Have some protective clothing such as shop apron, gloves, ( nomex flight gloves are great)jeans, leather shoes ,clear face shield and hat/ cap. You do not want a visit from the “ tinsel fairy”. Been casting since late 70’s and keep Pb in metal ammo cans. I only size with RCBS sizer and dies since 70’s.
|
The Following User Likes This Post:
|
|
|
|
Posting Rules
|
|
|
|
|