Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Ammunition-Gunsmithing > Reloading
o

Notices

Reloading All Reloading Topics Go Here


Reply
 
Thread Tools Display Modes
  #1  
Old 07-12-2009, 10:15 AM
*Klutch*'s Avatar
*Klutch* *Klutch* is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Jun 2009
Location: Pennsylvania
Posts: 165
Likes: 0
Liked 3 Times in 2 Posts
Default Reloading with Berry's Plated

Good Morning guys. I'm only on my second cup of coffee so the wheels are not turning fast enough yet. I have some questions on using Berry's Plated bullets for .38 and .357mag, I'll be using their 125gr and 158gr HP in both calibers with Federal primers and Hogdon Titegroup for the .38 and Alliant 2400 in the .357. I don't have much for reloading data but a new book (Lee 2nd edition) is on the way but I'm sitting here wanting to do some reloading and have only used Hornady XTP's before and need some powder charge info. So my Question is: Do I use the data for a cast bullet or a jacketed bullet or is it specific to plated bullets? Iknow there is data for plated bullets but none of the manufacturers websites offer that info. I am only making target loads but would like to make some at full strength cause I have never used 2400 before and would like to see the differences in magnum powder vs. the .357 I made with Titegroup which just makes a 12" muzzle blast and doesn't kick very hard. I'll be firing them out of my Ruger SP101 and my S&W 642, thanks in advance for any help.
Craig
__________________
NRA Member
Reply With Quote
  #2  
Old 07-12-2009, 10:23 AM
max's Avatar
max max is offline
US Veteran
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Mar 2001
Location: illinois
Posts: 6,294
Likes: 1,849
Liked 6,681 Times in 2,115 Posts
Default

The Berry website says not to exceed 1200fps. I suggest you read what they have to say about loading their products.
Reply With Quote
  #3  
Old 07-12-2009, 10:36 AM
mtb1bkr mtb1bkr is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Sep 2006
Location: Salt Lake City
Posts: 1,115
Likes: 0
Liked 15 Times in 9 Posts
Default

I've used 1000s of Berry's bullets in everything from .38 - .50 and they are good quality bullets. They are not meant to be fired at magnum velocities as the jacket will likely seperate from the lead core. I load mine in the middle ground between a lead and jacketed bullet of the same profile and have never had a problem.

Bill
__________________
US Marine, 16 years+
Reply With Quote
  #4  
Old 07-12-2009, 10:52 AM
RidgwayCO RidgwayCO is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Aug 2004
Location: Western Colorado
Posts: 253
Likes: 0
Liked 19 Times in 12 Posts
Default

My experience with plated bullets is to use the starting to mid-level loads for the same-weight jacketed bullets. Don't try to "magnum-ize" them, or you'll strip that thin plating right off.
Reply With Quote
  #5  
Old 07-12-2009, 10:57 AM
Amici Amici is offline
Banned
 
Join Date: Nov 2008
Posts: 710
Likes: 0
Liked 8 Times in 6 Posts
Default

Quote:
Originally Posted by RidgwayCO View Post
My experience with plated bullets is to use the starting to mid-level loads for the same-weight jacketed bullets. Don't try to "magnum-ize" them, or you'll strip that thin plating right off.
Agreed on the velocities for plated or "copperized" (copper-dusted) bullets. I used LEAD bullet data when l loaded Berry's and other plated bullets.

I now use poly-coated bullets. I find them more cost-effective and quite clean.
Reply With Quote
The Following User Likes This Post:
  #6  
Old 07-12-2009, 10:58 AM
*Klutch*'s Avatar
*Klutch* *Klutch* is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Jun 2009
Location: Pennsylvania
Posts: 165
Likes: 0
Liked 3 Times in 2 Posts
Default

Does anyone have a .357 load with 2400 and 158gr Berry's HP for 1100fps? Or should I just stick with using the Titegroup?
Thanks again to everyone
__________________
NRA Member
Reply With Quote
  #7  
Old 07-12-2009, 01:45 PM
magnum12pm's Avatar
magnum12pm magnum12pm is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Jan 2007
Location: Central Ohio
Posts: 453
Likes: 0
Liked 5 Times in 4 Posts
Default

Quote:
Originally Posted by *Klutch* View Post
Does anyone have a .357 load with 2400 and 158gr Berry's HP for 1100fps? Or should I just stick with using the Titegroup?
Thanks again to everyone

I shot 10K of berries 125gn. and 158gn with Titegroup, target loads at 3.9 grains of powder on the 125gn. bullet which is a little lighter than factory loads. I just figured there was no need to max load to shoot paper at 60 foot ranges or less. It just wastes powder in my book.
Reply With Quote
The Following 2 Users Like Post:
  #8  
Old 07-12-2009, 01:51 PM
Reloader Fred Reloader Fred is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Jun 2009
Posts: 128
Likes: 0
Liked 21 Times in 9 Posts
Default

I load so many Berry's bullets that I have a wholesale account with them.

There are a couple of caveats to their use. First, be sure to bell the case mouth enough that you don't shave the plating off. This is important. Second, don't over crimp. If you cut through the plating, the bullets will likely tumble.

A couple of powder companies have loads listed for plated bullets, specifically Accurate Arms and Ramshot/Western Powders. Accurate Arms lists loads for Rainier Bullets, but can be used for Berry's as well. Ramshots lists loads with the Berry's Bullets in several calibers.

I've run Berry's pistol bullets up to 1,300 fps without tumbling, but that's the absolute limit. They should be kept at 1,250 fps or below for best performance. I've tried them at 1,450 fps in the 357 Sig, and almost ruined my chronograph when a wildly tumbling bullet hit one of the sky screen support rods.

You can use loading data for mid-range jacketed bullets of the same weight and profile without problem in most cases with Berry's Bullets. I develop some of my own load data with them, but it's my personal policy to not post loading data on any forums, due to the possibility of mis-typing, transposing, etc. Besides, I wouldn't take data from an anonymous person myself and wouldn't expect anyone else to use mine.

Hope this helps.

Fred
Reply With Quote
The Following User Likes This Post:
  #9  
Old 07-12-2009, 01:59 PM
dwhite53 dwhite53 is offline
Member
 
Join Date: Apr 2007
Location: Raleigh, N. Carolina USA
Posts: 90
Likes: 0
Liked 2 Times in 2 Posts
Default

To avoid the crimp cutting into the jacket I seat them about 1/64" below the start of the ogive. I then roll the crimp over the ogive. I use a light roll crimp. I've had no issues doing this however I'd carefully work my loads up as the deeper depth reduces case volume quite a bit.

All the Best,
D. White
Reply With Quote
The Following User Likes This Post:
  #10  
Old 07-12-2009, 03:12 PM
TSQUARED TSQUARED is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Nov 2004
Location: Michigan, USA
Posts: 2,260
Likes: 2
Liked 114 Times in 84 Posts
Default

I have only loaded 38 Special and 357 magnum cases and Berry's 125 & 158 gr. plated bullets with Trail Boss powder. I have used the data on the Hodgdon website for lead bullets.
Quote:
Originally Posted by *Klutch* View Post
Good Morning guys. I'm only on my second cup of coffee so the wheels are not turning fast enough yet. I have some questions on using Berry's Plated bullets for .38 and .357mag, I'll be using their 125gr and 158gr HP in both calibers with Federal primers and Hogdon Titegroup for the .38 and Alliant 2400 in the .357. I don't have much for reloading data but a new book (Lee 2nd edition) is on the way but I'm sitting here wanting to do some reloading and have only used Hornady XTP's before and need some powder charge info. So my Question is: Do I use the data for a cast bullet or a jacketed bullet or is it specific to plated bullets? Iknow there is data for plated bullets but none of the manufacturers websites offer that info. I am only making target loads but would like to make some at full strength cause I have never used 2400 before and would like to see the differences in magnum powder vs. the .357 I made with Titegroup which just makes a 12" muzzle blast and doesn't kick very hard. I'll be firing them out of my Ruger SP101 and my S&W 642, thanks in advance for any help.
Craig
Reply With Quote
  #11  
Old 07-13-2009, 08:18 AM
cptdco cptdco is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Sep 2005
Location: SE Pa
Posts: 630
Likes: 7
Liked 107 Times in 39 Posts
Default

I've always been mostly a lead bullet reloader and shooter but recently started using Berry's bullets when my local pistol range / gun shop started carrying them. I've been loading the 158 grain in .357 using Alliant powder. Berry's web site (FAQs) says: "we have found best results using low- to mid-range jacketed data in the load manual". Alliant's web site recommends 14.8 grains of 2400 for a jacketed bullet but also stipulates: "REDUCE RIFLE AND HANDGUN CHARGE WEIGHTS BY 10% TO ESTABLISH A STARTING LOAD". Do the math and I get 13.3 grains. My Lee auto-disc dispenser will throw 13.0 with one disc and 13.6 with the next. I've tried them both and settled on the 13.0 grains. I didn't have any problems with the higher number, just didn't see any advantage to it for my uses. 13.0 lets me know its not a .38 special load, and is accurate and fun to shoot.
Dennis
Reply With Quote
  #12  
Old 07-15-2017, 04:14 AM
ovrbrdonammo ovrbrdonammo is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Jan 2017
Location: CastroValley,ca.
Posts: 10
Likes: 9
Liked 2 Times in 1 Post
Cool Berry`s bullets

Anybody have comments on Berry`s plated wadcutters. Accuracy, leading, consistancy.
Reply With Quote
  #13  
Old 07-15-2017, 10:12 AM
STORMINORMAN STORMINORMAN is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Mar 2010
Location: Pacific NW
Posts: 2,106
Likes: 1,154
Liked 1,383 Times in 835 Posts
Lightbulb Sure...

[QUOTE=ovrbrdonammo;139667877]Anybody have comments on Berry`s plated wadcutters. Accuracy, leading, consistancy.[/QUOTE/

Shoot 'em in my Model of 1955 in 45acp and love 'em... Plenty accurate, no leading at target velocities and as consistent as they make 'em. Have shot a lot of the 125gr RNFP in 38S&W Special using W231, 700-X, 800-X & Auto Complete and they all shoot just fine.

Cheers!

P.S. Spring for jacketed bullets for your hotter 357mag loads: you can usually find them ON $ALE and I believe you'll be happier with the results. Just an IMHO.
Reply With Quote
The Following User Likes This Post:
  #14  
Old 07-15-2017, 12:39 PM
at_liberty at_liberty is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Feb 2014
Location: upstate South Carolina
Posts: 1,030
Likes: 23
Liked 490 Times in 253 Posts
Default

Quote:
Originally Posted by *Klutch* View Post
Good Morning guys. I'm only on my second cup of coffee so the wheels are not turning fast enough yet. I have some questions on using Berry's Plated bullets for .38 and .357mag, I'll be using their 125gr and 158gr HP in both calibers with Federal primers and Hogdon Titegroup for the .38 and Alliant 2400 in the .357. I don't have much for reloading data but a new book (Lee 2nd edition) is on the way but I'm sitting here wanting to do some reloading and have only used Hornady XTP's before and need some powder charge info. So my Question is: Do I use the data for a cast bullet or a jacketed bullet or is it specific to plated bullets? Iknow there is data for plated bullets but none of the manufacturers websites offer that info. I am only making target loads but would like to make some at full strength cause I have never used 2400 before and would like to see the differences in magnum powder vs. the .357 I made with Titegroup which just makes a 12" muzzle blast and doesn't kick very hard. I'll be firing them out of my Ruger SP101 and my S&W 642, thanks in advance for any help.
Craig
You would want to be using a taper crimp die or stick to the XTP's or other with a crimp groove, especially with stouter loads.
Reply With Quote
  #15  
Old 07-15-2017, 12:44 PM
Big Cholla Big Cholla is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Jul 2008
Location: Las Vegas, NV
Posts: 3,428
Likes: 5,932
Liked 5,259 Times in 1,732 Posts
Default

An old thread brought back to life. ... Good. The info will be informative to many newbies and some of us oldies. .... I have used Berry's cast bullets for nearly as long as they have been in business. I often drive to St. George just to purchase direct from them.

The advice to hold the velocity down to mid-load levels is valid and will result in maximum accuracy for the subject handgun. I am just now starting to reload with their .41 caliber bullets for the .41 S&W magnum. I haven't run into a single problem and the initial accuracy from 3 different barrel length .41 mags has been right up there and exactly what I expected. ................
Reply With Quote
  #16  
Old 07-15-2017, 12:52 PM
oneounceload oneounceload is offline
Banned
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Apr 2009
Location: FL
Posts: 1,973
Likes: 2,364
Liked 2,962 Times in 1,115 Posts
Default

Quote:
I now use poly-coated bullets. I find them more cost-effective and quite clean.
Sorry for the slight thread drift, but is there a particular brand of poly-coated bullets?
Reply With Quote
  #17  
Old 07-15-2017, 01:01 PM
StakeOut's Avatar
StakeOut StakeOut is offline
US Veteran
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Feb 2016
Location: NW of Austin Texas
Posts: 3,090
Likes: 1,351
Liked 4,938 Times in 1,730 Posts
Default

The Berry Bullets are nice and the 200gr SWC shoot very well in 45 revolvers but I like to reload for paper target shooting at about $5.00/50 45acp/Auto Rim

I buy hard cast 200gr SWC @ $30/500
__________________
NEVER GIVE UP YOUR GUN
Reply With Quote
  #18  
Old 07-15-2017, 02:29 PM
at_liberty at_liberty is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Feb 2014
Location: upstate South Carolina
Posts: 1,030
Likes: 23
Liked 490 Times in 253 Posts
Default

Quote:
Originally Posted by ovrbrdonammo View Post
Anybody have comments on Berry`s plated wadcutters. Accuracy, leading, consistancy.
I stuck some in my barrel, so make sure your load is for jacketed or at least well up on the load range for lead. Seat flush.
Reply With Quote
  #19  
Old 07-24-2017, 03:08 PM
GranDoug's Avatar
GranDoug GranDoug is offline
Member
Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated Reloading with Berry's Plated  
Join Date: Jul 2017
Location: Homosassa, Fl
Posts: 16
Likes: 0
Liked 2 Times in 2 Posts
Default

I shoot Berry's in .45ACP, and I treat them as plated bullets. They are fine.
Reply With Quote
The Following User Likes This Post:
Reply

Tags
357 magnum, 642, chronograph, crimp, hornady, ruger, sig arms

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PLEASE LOCK>>Berry's .452 200 gr plated swc Just another 22 shooter Accessories/Misc - For Sale or Trade 5 10-30-2016 01:23 PM
Berry's Plated Bullets wesoly Reloading 13 11-13-2015 09:34 PM
Reloading data for Berry's .41 Mag 210 gr. plated bullets with 2400 or Accurate #9 Malpasowildlifer Reloading 2 03-25-2014 06:15 PM
Berry 9MM 115 Preferred Plated Robert-57 Reloading 11 06-25-2013 05:05 PM
Anyone used Berry's plated 180gr HP .40? The Rabbi Reloading 9 07-19-2009 08:39 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 08:38 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)