Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Antiques
o

Notices

S&W Antiques S&W Lever Action Pistols, Tip-Up Revolvers, ALL Top-Break Revolvers, and ALL Single Shots


Reply
 
Thread Tools Display Modes
  #1  
Old 10-22-2018, 09:05 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default S&W #2 Old Army Japanese Markings

Sorry I can't do pictures but I have a Old Army that the story goes was acquired at the battle for Okinawa in WW2 . It has most of its finish gone but is mechanically very good , very little play in the hinge and a worn but mirror bore.


The stocks have been carved into a corral pattern and lacquered to a salmon or corral color. The back strap is marked with Japanese writing .


My question is does this gun increase or decrease in value because of the Japanese heritage and markings ? Or is just another Old Army revolver.


The bring back story is without documentation so I recognize it is just a story and has no monetary value. So I am just asking about the heritage only. I have not gotten an interpretation of the markings yet, but assume they tell the year, armory where registered type thing. Any comments would be appreciate.

PS: I quess I can do a picture
Attached Images
File Type: jpg Japan-pistol-2.jpg (82.1 KB, 400 views)
File Type: jpg Japan-pistol-5.jpg (25.9 KB, 452 views)

Last edited by mnrivrat; 10-22-2018 at 09:06 PM.
Reply With Quote
  #2  
Old 10-22-2018, 09:23 PM
rct269 rct269 is offline
SWCA Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Feb 2006
Location: Pikeville, Tennessee
Posts: 6,025
Likes: 910
Liked 9,880 Times in 3,633 Posts
Default

A wise soul once said, "Buy the gun, not the story.".

Another one said, "Then again, it all depends on what the story is.".

At such time as you have the translation of the writing on the back strap, you might want to repeat your question----or ask a different one----or an additional one---or six or eight.

In the meantime------------------------have a nice day.

Ralph Tremaine
Reply With Quote
  #3  
Old 10-22-2018, 09:59 PM
opoefc opoefc is offline
Absent Comrade
US Veteran
SWCA Founding Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Apr 2003
Location: San Diego, CA. USA
Posts: 10,536
Likes: 3,529
Liked 6,883 Times in 2,796 Posts
Default

S&W shipped a lot of S&W Model 2 Armies to Japan. 1st thing you should do, is get a factory letter for the gun to verify, or not, shipment to Japan. The back strap stampings may. or may not, be Japanese. All the Japanese shipped S&Ws I am familiar with have the stampings on the side of the frame or the barrel, and they are the military or prefectures stamps, and are in "Old" Japanese that is difficult to translate by modern Japanese speakers. My guess that your gun's backstop stamping may be Chinese, which does not conflict with the story of the gun's origin being Okinawa, a Japanese soldier may well have acquired the gun in China.( Japanese Ordnance Supply was not loaded with .32RF ammo inWW2 ) ( One of my buddies picked up a Colt SAA from a North Korean KIA in the Korean war - Go Figure ! ) Ed.

Last edited by opoefc; 10-22-2018 at 10:02 PM.
Reply With Quote
The Following 3 Users Like Post:
  #4  
Old 10-22-2018, 11:06 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

Thanks guys for your input. As I mentioned I know you don't pay for a story. I guess I must of heard the same wise man speak.

I never thought of the idea that the writing may be Chinese.

I had read that a lot of orders for number 2's went to Japan via Europe .


I am not sure it is worth the cost of a letter to find out whether it was originally shipped to Japan unless that would add value. I paid less than $300 for the gun so figure it should always be worth that. I also have some ammo for it that my brother had picked up at a garage sale. It is clean ammo made in Canada but I haven't shot the gun yet. Maybe it is because the prices I see for the stuff makes it pretty spendy to shoot.


I think my next step is to verify if the writing is as you say Chinese or Japanese . However my question is in general regarding if there is any reason to believe that this gun is more or less valuable than any average Old Army in same like condition.
Reply With Quote
The Following User Likes This Post:
  #5  
Old 10-23-2018, 08:54 AM
glowe's Avatar
glowe glowe is online now
US Veteran

S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,256 Times in 5,434 Posts
Default

To anyone who collects S&W, there is no such thing as an unusual gun that is not worth the cost of a factory letter. The true value in collecting vintage S&W revolvers is learning the history, provenance, form and function and where it fits with the gun you are researching. If you were not interested in the Model 2s history, you would probably not started this thread.

You owe it to the gun that is temporally in your possession to document its pedigree wherever possible, for your knowledge and for the continuing education of the members here and future owners as well. It should not be difficult to obtain a translation of the engraving. I think it looks more like Chinese than Japanese as Ed stated that possibility or maybe even Korean?? Take a very clear picture of the butt-frame and contact any Asian-American organization, museum, etc.

Check out this link as it has some good basic differences between these written scripts. Your image is not clear enough to make out much detail. How to tell written Chinese, Japanese and Korean apart
__________________
Gary
SWCA 2515
Reply With Quote
The Following User Likes This Post:
  #6  
Old 10-23-2018, 12:22 PM
mm93 mm93 is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: May 2018
Location: West
Posts: 309
Likes: 36
Liked 554 Times in 176 Posts
Default

I think in general modifications like this take away value. But I would also have the markings translated first, and then whatever is revealed may change your mind as to whether you get a factory letter or not.
Translation of the markings, and an interesting factory letter may be a game changer as to whether the mods are good or bad to it's value.
Reply With Quote
The Following User Likes This Post:
  #7  
Old 10-23-2018, 01:54 PM
mmaher94087 mmaher94087 is offline
SWCA Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Nov 2006
Location: Arizona
Posts: 3,562
Likes: 4
Liked 2,494 Times in 1,296 Posts
Default

Have the characters translated. It may reveal the Prefecture or place it was sent and the Rack number or gun number for inventory. I have had three translated. One went to the Yokohama Naval Base, one to the Shimaneken Prefecture and one to the Hiroshima Prefecture. They all had Rack or gun numbers and dates.
__________________
Mike Maher #283
Reply With Quote
The Following User Likes This Post:
  #8  
Old 10-23-2018, 05:24 PM
opoefc opoefc is offline
Absent Comrade
US Veteran
SWCA Founding Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Apr 2003
Location: San Diego, CA. USA
Posts: 10,536
Likes: 3,529
Liked 6,883 Times in 2,796 Posts
Default

MNrivrat, I have a data base of most of the serial numbers of S&Ws shipped to Japan and how they were marked by the Japanese, etc. If you tell me your serial number, I can check to see if it's listed. My data base also has all the types of Japanese markings used on S&Ws shipped to Japan, or acquired from the Russians by Japan in the Jap-Russian war, I have compared your markings to the markings shown in the data base. No match, however some of the symbols, such as the 3 horizontal lines translate to the number "30" in Japanese as well as most Chinese dialects. Most Japanese writing has curved lines. Your stampings are mostly straight lines, however that maybe because who ever stamped the gun did not have a tool to stamp, or cut, curved lines. I'm still leaning to the stampings being Chinese, not Japanese. Ed. ( S&W factory letters for Japan shipped guns do not alway verify that, as some went to distributors in other places, such as Australian dealers, that were acting as agents for the Japanese. Such guns, with Japanese prefecture or military/naval stamps are considered by collectors to be authentic Japanese S&Ws. )

Last edited by opoefc; 10-23-2018 at 05:50 PM.
Reply With Quote
  #9  
Old 10-23-2018, 11:14 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

Again I thank all for their input. It is deeply appreciated .

I have attached 3 backstrap photo's to try to make the characters clearer. The serial number is 62846


I looked at the mentioned site on how to tell the difference between Japanese, Chinese, and Korean. To my eye the writing appears to be Japanese.

Keith
Attached Images
File Type: jpg Japan-pistol-1.jpg (81.8 KB, 156 views)
File Type: jpg Japan-pistol-2.jpg (82.1 KB, 154 views)
File Type: jpg Japan-pistol-3.jpg (87.5 KB, 164 views)

Last edited by mnrivrat; 10-24-2018 at 05:26 AM.
Reply With Quote
The Following 2 Users Like Post:
  #10  
Old 10-24-2018, 08:50 AM
glowe's Avatar
glowe glowe is online now
US Veteran

S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,256 Times in 5,434 Posts
Default

Still would be hard for an expert to interpret all the characters. One option for making the characters more visible would be to take some black latex hobby paint and paint the characters, let dry and remove the paint from the back-strap with your fingernail leaving it in the engraving. It is very easy to remove with soapy water and a hard bristle toothbrush. Have you had the stocks off? The stocks may not be original rosewood that was carved, but rather some other material? If the stocks are original, the right one would have a serial number stamped inside.
__________________
Gary
SWCA 2515
Reply With Quote
  #11  
Old 10-24-2018, 10:44 AM
Wiregrassguy's Avatar
Wiregrassguy Wiregrassguy is offline
SWCA Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jul 2012
Location: AL Wiregrass
Posts: 7,201
Likes: 34,555
Liked 10,739 Times in 3,659 Posts
Default

You might want to give a free online translation a try.


Actually that won't work unless the picture is converted to text. There is an Android app that will translate from a picture but I can't get it to work with the pictures you have posted. Perhaps you would have more success using the engraving rather than a picture.
__________________
Guy
SWHF #474 SWCA LM#2629

Last edited by Wiregrassguy; 10-24-2018 at 11:17 AM.
Reply With Quote
  #12  
Old 10-24-2018, 02:06 PM
opoefc opoefc is offline
Absent Comrade
US Veteran
SWCA Founding Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Apr 2003
Location: San Diego, CA. USA
Posts: 10,536
Likes: 3,529
Liked 6,883 Times in 2,796 Posts
Default

Serial # 62846 does fall within a number of Model 2 Armies sent to Japan, by either the factory or a distributor. 62565 is the nearest number in my data base and it is stamped "1872/413/ Armory Administration" in Japanese, however none of that stamping's Japanese characters match any on the poster's gun's back strap. Of the approx. 200 Model 2s in my data base, none are stamped on the back strap. Most are stamped on the frame, cylinder or barrel. In the early 1870s there were over 300 Prefectures in Japan, each with it's own stamp for firearms, however by 1873 the combination of Prefectures reduced their numbers to about 70. Since the "story" for this Model 2 mentioned Okinawa, I have compared the stampings of the Okinawa Prefecture to the back strap. No match of any of the characters for Okinawa. Ed

Last edited by opoefc; 10-24-2018 at 02:29 PM.
Reply With Quote
The Following 2 Users Like Post:
  #13  
Old 10-24-2018, 03:25 PM
gmborkovic gmborkovic is online now
SWCA Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Feb 2014
Location: VA & SoFL
Posts: 8,643
Likes: 469
Liked 5,692 Times in 3,185 Posts
Default

As an antique gun collector, you have to love this gun. It has everything.
Most of all mystery.
__________________
Mike 2796
SoFo Bunch member
Reply With Quote
The Following 2 Users Like Post:
  #14  
Old 10-24-2018, 03:33 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

To answer Glowe's question , yes I have had the stocks off and they are marked with the serial number on the RH side. Another part of the mystery of this gun is that the serial number has been moved from the bottom of the grip and stamped in small numbers on the side of the frame under the stock. The bottom of the grip now has this OTTO B. 50 stamped across it. I'm thinking that was done by whoever acquired the gun from its Japanese source ? The gun is also marked on the frame, cylinder, and barrel assembly with a small GG6 which should be assembly numbers I think.
A lot of good input from you folks. It will likely take me a bit of time to absorb, and due to very poor health, that at times puts me in bed for numbers of days, please except my apology if my follow up is or gets slow. Thanks again to all, and keep whatever thoughts you might have coming

Keith
Reply With Quote
  #15  
Old 10-24-2018, 11:30 PM
opoefc opoefc is offline
Absent Comrade
US Veteran
SWCA Founding Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Apr 2003
Location: San Diego, CA. USA
Posts: 10,536
Likes: 3,529
Liked 6,883 Times in 2,796 Posts
Default

Can you post photos of the stamps on the butt and side of the frame? The GG6 is the assembly code number. What is the evidence the serial number has been moved? Is the grip frame shorter because it has been ground down? S&W did stamp serial numbers on the left grip frame occasionally, but usually due to damage to the butt part of the frame. Are there any other markings of any kind anywhere else on the gun, other than the butt & back strap and , I assume, the usual S&W factory stamp on the barrel rib? I have asked a fellow S&W collector, whose lovely wife is Japanese, to ask her if she can translate the markings, or confirm they are old style Kanji marks. Ed.
Reply With Quote
  #16  
Old 10-25-2018, 07:44 AM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

I am presently not set up to take photo's. Sorry, I bought a new camera some time ago but due again to health issues I have not even removed it from its box. (I have been non functional/worthless of late)

The ones I have posted were provided to me by the person I purchased the gun from. The top rib is marked " Smith & Wesson.Springfield.Mass. "
After purchase I have replaced the front sight blade with a brass insert, and I found, and purchased, an original ejector rod and screw.

Cylinder is marked " Patented April 3,1855,July 5,1859, ????,18,1860."
( There is some light pitting at the point in the cylinder obscuring the month that I show as ????)

All lettering is upper case. There are no other markings on the gun.


The butt of the grip frame shows filing marks , the bottom of the stocks are not proud of the metal . I am posting the last of the photos I have for now.
Attached Images
File Type: jpg Japan-pistol-4.jpg (26.7 KB, 145 views)
File Type: jpg Japan-pistol-6.jpg (26.2 KB, 146 views)
File Type: jpg Japan-pistol-7.jpg (23.6 KB, 135 views)
Reply With Quote
The Following 2 Users Like Post:
  #17  
Old 10-25-2018, 08:42 AM
Tom Kent Tom Kent is offline
US Veteran
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Mar 2010
Location: Pompano Beach Fl
Posts: 631
Likes: 2,415
Liked 881 Times in 339 Posts
Default

In my opinion you have an interesting gun and a piece of history. The markings on the back of the grip frame could also be a poetic phrase or a name of a previous owner. Hope you find out and post your findings here for the rest of us to share.
Reply With Quote
The Following User Likes This Post:
  #18  
Old 10-26-2018, 09:08 AM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

I am going to keep trying to ID the writing. Some here have referred to stamped characters. I have taken another close look at the backstrap under magnification and two things have stood out to me. One is that all characters look to be hand engraved. I don't think they were stamped.


The second thing is that there are what appear as straight file cross lines covering the back strap. These look to have been done after the characters were cut into the back strap. The character at the very top of the back strap looks to have been partly filed away rather than worn.


It is anybody's guess what this means. It could have been done at the time the characters were hand engraved in order to remove burrs from the engraver tool , or it could have been done later to remove rust ? My gut says that they smoothed the back strap to remove metal standing up from the chisel engraving. No sign of general rust - a little very light rust near the bottom that I easily whipped off with a little oil and 0000 steel wool.

Trying to be fully realistic, to me that would also bring a possibility that someone tried to fake a gun and story. That however leaves the stocks with the carving which do not look like anything recently done at all. (neither does the engraving)


If a fake was attempted here, it sure did not work out well because the price I paid was perhaps 1/2 of what the gun in non modified condition should go for.


My opinion at this time is that all is genuine and the modifications were made in Japan prior to WW2 . I just wanted to share a couple more details that I suppose are once again part of the mystery, and I am aware that folks also do things to try to add value to what they sell.


So far it looks like the gun was shipped to Japan according to opoefc's records. It also looks like there are no military or registration marks on the gun. The military would have not let someone modify the grips in that manner (at least I think not) So the guns history is dependent mostly on a translation. Who knows what happened to this gun from the time of the early 1870's to WW2 ? It would certainly not be a military issued item in the 1940's , yet if the story is true it was in service by some Japanese soldier as likely a family item like many of the swords that passed from generation to generation.


PS: I stated previously that after reviewing the web site on how to tell the different writing of Korea , China, and Japan, that to my eye it looks to be Japanese. To a more trained eye it may be possible that it is Chinese but I don't think so. I am 90% confident the writing is Japanese. - I can always be wrong to . It is definitely not Korean.
Reply With Quote
  #19  
Old 10-26-2018, 10:46 AM
glowe's Avatar
glowe glowe is online now
US Veteran

S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,256 Times in 5,434 Posts
Default

Have you ordered the letter yet?

People use stamping/engraving as meaning the same in many instances and no pictures you have yet provided indicated one or the other. Besides, it does not make a difference, since the Japanese were certainly capable of doing either.

It is not certain your gun was shipped anywhere without the letter and Ed stated only that it was in the serial number range of some Model 2s that went to Japan. Ronald Curtis has an extensive database if the Model 2 including 56 examples of Model 2s going to Japan. All of them are from 52499 to 58852. He has none in the 60,000 range, and large blocks of sequentially numbered guns did not go to Japan, but rather much more randomly picked guns from inventory were shipped.

So far, you still have lots of what-ifs and maybes. Spend the $75 and get the letter and get the symbols translated. We would all like to know what you find.
__________________
Gary
SWCA 2515
Reply With Quote
  #20  
Old 10-26-2018, 02:31 PM
opoefc opoefc is offline
Absent Comrade
US Veteran
SWCA Founding Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Apr 2003
Location: San Diego, CA. USA
Posts: 10,536
Likes: 3,529
Liked 6,883 Times in 2,796 Posts
Default

Gary, Ron's data base info. is included in my data base, however Ron's base does not include Japanese shipments in the 62,000 serial number range, of which there are several, partly because Ron's info shows guns that letter to Japan, while I include guns that were ordered or sent to Japan by Agents located in other countries and those guns only letter to the Agents. Ed.
Reply With Quote
The Following User Likes This Post:
  #21  
Old 10-26-2018, 04:35 PM
glowe's Avatar
glowe glowe is online now
US Veteran

S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,256 Times in 5,434 Posts
Default

I suspected that you had information indicating shipments in the 62,000 serial number range, but am I correct in assuming they were not sent in large blocks and many in that same range would have been sent elsewhere??
__________________
Gary
SWCA 2515
Reply With Quote
  #22  
Old 10-27-2018, 01:14 AM
opoefc opoefc is offline
Absent Comrade
US Veteran
SWCA Founding Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Apr 2003
Location: San Diego, CA. USA
Posts: 10,536
Likes: 3,529
Liked 6,883 Times in 2,796 Posts
Default

Gary, Hard to say, but if I were making assumptions ( which is always dangerous with S&Ws ) I would assume that probably shipment's/ sales of S&Ws by agents and S&W distributors to Japan were not in large blocks. More like a couple dozen per shipment, I would guess. ( The large blocks of S&Ws shipped to Japan by the factory occurred from orders placed by S&W distributors. They were mostly the NM#3s & revolving rifles. ) Most of the info. on Japanese marked Model 2 Armies in the serial range of 62000 comes from Japanese archives of the 1870s and their recordings of guns owned by the Prefectures or military armories. They didn't record the source for the Model 2s, however. Also, there are many other makes of firearms in their records besides S&Ws. I recently examined a civil war era Spencer carbine with Tokyo Arsenal stamps, plus the late John Ottoman once showed me a nicely done copy of a Model 2 that was made by the Japanese. Ed.

Last edited by opoefc; 10-27-2018 at 01:27 AM.
Reply With Quote
  #23  
Old 11-02-2018, 07:58 AM
seinen's Avatar
seinen seinen is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jan 2008
Posts: 103
Likes: 7
Liked 27 Times in 6 Posts
Default

Mnrivrat,

The markings (kanji) on the backstrap of your S&W No. 2 are both hand-applied and Japanese. They read, from top to bottom, as follows: “壬申 – 千二百二十一番 – 名東縣”, which translate “1871 (Western Year) - No. 1,221 - Myodo Prefecture.” Myodo Prefecture was once located in the Shikoku region, but only existed between 1871 and 1880. It became the current Tokushima Prefecture on March 2, 1880.

I can’t offer any conjecture as to its supposed use on Okinawa, however, in the late stages of WWII, lots of weapons expedients, including some S&W Mod. 3 revolvers, did turn up there.

C/

Last edited by seinen; 11-02-2018 at 10:17 AM.
Reply With Quote
  #24  
Old 11-03-2018, 06:29 AM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

Seinen,

You will never know just how grateful I am for your information. Please accept my most sincere THANK YOU . You have made my day and then some.

Good health and happiness to you : Keith
Reply With Quote
  #25  
Old 11-03-2018, 10:42 AM
seinen's Avatar
seinen seinen is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jan 2008
Posts: 103
Likes: 7
Liked 27 Times in 6 Posts
Default

Keith,

You're very welcome. I don't know a whole lot about S & W firearms, but I can usually assist with Japanese translations, military history, etc. Happy to help anytime.

If you do decide to get a factory letter for your No. 2, please do post the findings here. I have a couple of Japanese-marked No. 2 revolvers and they were shipped directly from S&W to Japanese firms or foreign companies acting as agents for the Japanese.

C/

Last edited by seinen; 11-03-2018 at 01:38 PM.
Reply With Quote
  #26  
Old 11-04-2018, 10:13 AM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

I do plan on getting the letter. I am short a printer at this time but maybe can find someone to print out the form and a photo. My youngest can do so but is in the process of moving at this time so it will be a week or two.

I will be sure to post it.
Thanks Again

Keith
Reply With Quote
The Following User Likes This Post:
  #27  
Old 11-23-2018, 10:30 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

I finally got things put together and today mailed my history request on this Japanese marked Old Army . Now just the wait and I will have about all I can dig up on the gun. I wish I could find out more of its history when it comes to who brought it back. So far I have not had much luck on that . Going to try another approach, but not holding my breath. I will post again when I get the letter from the History Foundation. Thanks again to all who have helped.
Reply With Quote
The Following 3 Users Like Post:
  #28  
Old 11-23-2018, 10:48 PM
AJ's Avatar
AJ AJ is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Apr 2003
Location: East of Stick Marsh, Fla.
Posts: 9,404
Likes: 4,871
Liked 20,868 Times in 6,322 Posts
Default

Please keep us posted.
__________________
USMC 69-93 Combat Pistol Inst.
Reply With Quote
  #29  
Old 11-23-2018, 10:54 PM
shouldazagged shouldazagged is offline
Absent Comrade
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

Thank you for posing this intriguing mystery. And thanks to seinen for the translation.

I really look forward to learning what the letter reveals.
__________________
Oh well, what the hell.
Reply With Quote
  #30  
Old 11-23-2018, 11:20 PM
mmaher94087 mmaher94087 is offline
SWCA Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Nov 2006
Location: Arizona
Posts: 3,562
Likes: 4
Liked 2,494 Times in 1,296 Posts
Default

A good reference for Japanese marked antique guns is a soft back booklet: "The Japanese Chose Smith & Wesson". Allan, Goddard, et.al. have done a wonderful job of presenting many Japanese markings found on Smith & Wesson Revolvers. Chip Goddard is 'seinen'. I'm sorry if I blew your cover Chip but I think you deserve credit. Thank you.
__________________
Mike Maher #283
Reply With Quote
The Following 2 Users Like Post:
  #31  
Old 11-27-2018, 05:08 AM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

And once gain thank you to Chip also. I have bought the book .
My final effort to receive information from the person I bought the gun from came up with a Zero. I had offered him financial compensation for anything I could use. His reply was that he purchased the gun from an elderly person at a gun show. All information regarding its origins as a bring back item taken from a Japanese soldier at Okinawa was he said "verbal".

Since it was antique and was a cash transaction, he did not take the sellers information. An ignorant choice on his part in my opinion, but now information lost from history and remains only as a undocumented story. Not sure how long the S&W History letter will take, but will certainly share its information when it arrives.


Keith
Reply With Quote
The Following User Likes This Post:
  #32  
Old 12-06-2018, 08:55 PM
seinen's Avatar
seinen seinen is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jan 2008
Posts: 103
Likes: 7
Liked 27 Times in 6 Posts
Default

Quote:
Originally Posted by mmaher94087 View Post
A good reference for Japanese marked antique guns is a soft back booklet: "The Japanese Chose Smith & Wesson". Allan, Goddard, et.al. have done a wonderful job of presenting many Japanese markings found on Smith & Wesson Revolvers. Chip Goddard is 'seinen'. I'm sorry if I blew your cover Chip but I think you deserve credit. Thank you.
Nah, no problem at all. Thanks also for the kudos. Just very happy to help anyway possible.

C/
Reply With Quote
  #33  
Old 12-06-2018, 08:57 PM
seinen's Avatar
seinen seinen is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jan 2008
Posts: 103
Likes: 7
Liked 27 Times in 6 Posts
Default

Quote:
Originally Posted by mnrivrat View Post
And once gain thank you to Chip also. I have bought the book. My final effort to receive information from the person I bought the gun from came up with a Zero. I had offered him financial compensation for anything I could use. His reply was that he purchased the gun from an elderly person at a gun show. All information regarding its origins as a bring back item taken from a Japanese soldier at Okinawa was he said "verbal".

Keith
Keith,

You're very welcome. My last factory letter from Roy took almost eight months to arrive, but the wait was worth it. Looking forward to hearing the results when yours arrives.

C/
Reply With Quote
  #34  
Old 12-06-2018, 09:14 PM
seinen's Avatar
seinen seinen is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jan 2008
Posts: 103
Likes: 7
Liked 27 Times in 6 Posts
Default

As a general rule, I don't frequent the S&W Antiques Forum all that often, since my collecting interests are very narrowly focused in the area of S&W arms. However, should anyone have weapons of interest with Japanese markings, I'd be more than happy to assist with translations. Just send me a PM through the forums system that you've posted a new thread and I'll take a look. Thanks!

C/
Reply With Quote
The Following 2 Users Like Post:
  #35  
Old 01-06-2019, 03:52 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

I have received the History letter on this gun from Roy. I will try to get a photo of it up soon.

The letter indicates that my S&W #2 likely left the factory on September 7th, 1869 . It was part of a 150 unit shipment to C.W. May Company in Paris ,France and Marked for Japan.

I am pleased to have received the letter from Roy and it confirms the gun was destined for Japan which would verify my understanding of this interesting (for me at least) firearm. I am saddened by the fact I do not have verification of the return of this gun to the US. (just the story)

It would have been great to have at least the name of the GI who reportedly acquired it from a Japanese soldier during WWII . That could have closed the final chapter in the travels and history, and would have been the key to help verify the story.


Additional comments from any of you are welcomed, and since I am in a state of bad health I will likely be liquidating this firearm sometime soon. So any Idea regarding its value would also be appreciated. Not looking for top dollar, just a place to start or a very fair & reasonable estimate of value.
Reply With Quote
The Following 4 Users Like Post:
  #36  
Old 01-08-2019, 05:54 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

My apology but I can not seem to get the letter photo to attach to a file here as of yet. I am working with my new camera now but am still trying to learn how to use it. It may not be attaching a correct JPG file name or something similar to that. If you want a photo please PM me with your e-mail address, and I will try to send a photo to you. I was able to take a picture and transfer it to my picture computer file. It just does not want to transfer to the forum for some yet unknown to me reason. Keith
Reply With Quote
  #37  
Old 01-08-2019, 09:28 PM
shouldazagged shouldazagged is offline
Absent Comrade
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

I don't think anyone has yet asked what the ornate stocks are made of. I don't recall ever seeing a coral-colored material used on any S&W handgun.

I'm also curious whether the decoration is carved or molded into the substance, whatever it is.
__________________
Oh well, what the hell.
Reply With Quote
  #38  
Old 01-08-2019, 11:12 PM
mnrivrat mnrivrat is offline
Member
 
Join Date: May 2009
Posts: 225
Likes: 2
Liked 93 Times in 56 Posts
Default

"I don't think anyone has yet asked what the ornate stocks are made of. I don't recall ever seeing a coral-colored material used on any S&W handgun."


Thanks for your interest

I have been told that it was not unusual for the Japanese to do this type of carving and enameling.

The stocks are original wood and have the serial number of the gun stamped as was S&W's policy. They are carved into the corral pattern and then color enameled to give the appearance.

Last edited by mnrivrat; 01-08-2019 at 11:14 PM.
Reply With Quote
The Following User Likes This Post:
  #39  
Old 01-09-2019, 01:39 AM
EarlB EarlB is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jul 2015
Location: North Texas
Posts: 633
Likes: 475
Liked 2,338 Times in 376 Posts
Default

Guess one should really be sure to follow all the areas of the S&W boards...never know what you will find. I saw this thread (very interesting revolver there mnrivrat)!...as I was going thru it I was about going to post up to get with the Banzai fellows for a translation but see Chip is a member here. Hello Chip! Been many a year since we conversed. I wish I still had my Japanese collection.

Earl Battey
__________________
Earl Battey
Reply With Quote
  #40  
Old 01-09-2019, 11:20 AM
shouldazagged shouldazagged is offline
Absent Comrade
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Feb 2013
Location: Louisville, KY, USA
Posts: 19,336
Likes: 53,737
Liked 38,386 Times in 11,801 Posts
Default

Quote:
Originally Posted by mnrivrat View Post
"I don't think anyone has yet asked what the ornate stocks are made of. I don't recall ever seeing a coral-colored material used on any S&W handgun."


Thanks for your interest

I have been told that it was not unusual for the Japanese to do this type of carving and enameling.

The stocks are original wood and have the serial number of the gun stamped as was S&W's policy. They are carved into the corral pattern and then color enameled to give the appearance.
Thanks, that's most interesting. The effect is striking.
__________________
Oh well, what the hell.
Reply With Quote
  #41  
Old 01-10-2019, 04:08 PM
seinen's Avatar
seinen seinen is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jan 2008
Posts: 103
Likes: 7
Liked 27 Times in 6 Posts
Default

Quote:
Originally Posted by EarlB View Post
I saw this thread (very interesting revolver there mnrivrat)!...as I was going thru it I was about going to post up to get with the Banzai fellows for a translation but see Chip is a member here. Hello Chip! Been many a year since we conversed. I wish I still had my Japanese collection. Earl Battey
Hey Earl - nice hearing from you again! You sold me a Type 38 Mukden carbine many years back and it still holds an honored place in my collection.

BTW, some of the guys over on the Gunboards Japanese Forum were asking about you a couple of weeks ago. If time allows, might want to drop by and say "hello."

C/
Reply With Quote
  #42  
Old 01-10-2019, 04:15 PM
seinen's Avatar
seinen seinen is offline
Member
S&W #2 Old Army Japanese Markings S&W #2 Old Army Japanese Markings  
Join Date: Jan 2008
Posts: 103
Likes: 7
Liked 27 Times in 6 Posts
Default

Quote:
Originally Posted by mnrivrat View Post
I have received the History letter on this gun from Roy. The letter indicates that my S&W #2 likely left the factory on September 7th, 1869. It was part of a 150 unit shipment to C.W. May Company in Paris ,France and Marked for Japan.
Thanks Keith for posting the factory letter history. I did receive your PM and will respond today or tomorrow.

C/
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
US ARMY markings on S&W M&P policerevolvercollector S&W Hand Ejectors: 1896 to 1961 20 05-28-2016 10:03 PM
Model No. 2 Army, Japanese Export digi-shots S&W Antiques 6 03-31-2014 07:10 PM
Antique S&W Revolvers With Japanese Markings seinen WANTED to Buy 0 06-08-2009 10:39 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 01:24 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)