Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Antiques
o

Notices

S&W Antiques S&W Lever Action Pistols, Tip-Up Revolvers, ALL Top-Break Revolvers, and ALL Single Shots


Reply
 
Thread Tools Display Modes
  #1  
Old 09-01-2020, 05:53 PM
mhn old gun guy mhn old gun guy is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Sep 2016
Posts: 4
Likes: 0
Liked 0 Times in 0 Posts
Default DOUBLE ACTION 44-40 FRONTIER SERIAL #'S

WHAT ARE THE REQUIRED SERIAL # LOCATIONS. ARE THERE SERIAL NUMBERS ON THE HARD RUBBER GRIPS.

MY DAD AND I TRADED FOR THIS FINE + REVOLVER SN#864X IN THE MID 60'S IN WICHITA KS. IT IS MATCHING #'S ON THE BOTTOM GRIP, BACK OF CYLINDER, UNDER THE LATCH. RECENTLY LOOKING ON LINE I SEE REFERENCE TO SN#'S INSIDE THE RIGHT GRIP. IS THIS A REQUIRED FACTORY LOCATION ON EVERY FACTORY GUN?? THE LAST TIME THIS REVOLVER WAS APART WAS MID 90'S AND THE GRIP HAS NO #.

IF I DECIDE TO SELL IT WILL THIS AFFECT VALUE. I WOULD SWEAR THE GRIPS ARE ORIGINAL TO THE GUN.
Reply With Quote
  #2  
Old 09-01-2020, 06:02 PM
first-model first-model is offline
SWCA Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Oct 2010
Posts: 1,668
Likes: 1,002
Liked 2,322 Times in 774 Posts
Default

From what I've seen, the hard rubber grips sometimes have a serial number (or partial serial number) scratched into them with an awl. But I'm sure some guns left the factory without serial numbers.

The .44 DA experts should be along shortly to confirm this ...

Mike
Reply With Quote
  #3  
Old 09-01-2020, 07:39 PM
mmaher94087 mmaher94087 is offline
SWCA Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2006
Location: Arizona
Posts: 3,562
Likes: 4
Liked 2,494 Times in 1,296 Posts
Default

I'm not the expert but often the scratched serial number is only visible in strong light and with magnification. A serial location you haven't mentioned is between the ears on the barrel beside the side(s) of the latch.
__________________
Mike Maher #283
Reply With Quote
  #4  
Old 09-01-2020, 07:49 PM
glowe's Avatar
glowe glowe is online now
US Veteran

DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,260 Times in 5,435 Posts
Default

Welcome to the Forum. First thing we have to know is when your revolver left the factory, in your case around 1895. Stock serial numbers were stamped since 1857, but changed to penciled or scratched serial numbers around 1900. The 44 Winchester Double Action Frontier was made from 1886 to 1913 so stocks had both the serial number methods depending on the age of the gun.

Second thing is to understand why the factory numbered the stocks in the first place. It is understood that the stocks were hand fitted to the frame before the frame was prepped and blued. They would have numbered every set since the stocks and gun were separated for bluing, then a person had to sort through maybe a hundred or more sets of stocks at a time to find the ones that were fitted to the gun. It would have been very rare that there were any stocks not originally marked, so this brings up other issues. If the gun was made before 1900 one would expect a stamped serial number and if made 1900 or later, they may have been scratched in or pencil. There is no issue with the stamped or scratched numbers and they are permanent, but the pencil era numbers are likely to have disappeared over the last 100 plus years.

Soooooooooo, it is very likely that unmarked stocks from pre-1900 44 DA Frontiers would be suspect as having been replaced after the factory, since factory stocks would have almost certainly had stamped numbers. Is it a huge deal if your stocks were not original? Maybe for some, but many would not even think to ask the auctioneer to check.

Lastly, when you stated that you checked UNDER THE LATCH, there are also numbers on the very rear end of the top-frame on both sides of where the top-latch inserts into the frame. You need a strong light and a good magnifying glass for that check. (I just saw that Mike already covered the top-frame numbers)
__________________
Gary
SWCA 2515

Last edited by glowe; 09-01-2020 at 07:55 PM.
Reply With Quote
  #5  
Old 09-01-2020, 09:18 PM
mhn old gun guy mhn old gun guy is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Sep 2016
Posts: 4
Likes: 0
Liked 0 Times in 0 Posts
Default DOUBLE ACTION 44 SERIAL #'S

THANKS FOR THE INFO. i HAVE ENJOYED THE REVOLVER ALL THESE YEARS BUT NEVER REALLY PURSUED DETAILED INFO. SINCE IT HASN'T BEEN APART SINCE THE 90'S, I WILL TAKE THE GRIPS OF AND LOOK AGAIN.I APPRECIATE THE HELP. YES THE SERIAL #'S ON THE EARS ARE CLEAR AND PRESENT. THANKS AGAIN

TO: GLOWE, GARY 2515. I TOOK THE GRIPS OFF TODAY. THERE ARE NO #'S. THERE IS A GRIND MARK JUST BELOW THE GRIP SCREW ON THE RIGHT GRIP. THIS BRINGS ANOTHER QUESTION AS HOW DO YOU STAMP #'S ON HARD RUBBER?? HEAT?? DO SCHOFIELDS, AMERICANS ETC HAVE THESE SAME GRIP #'S. I COLLECTED ANTIQUE MILITARY LONGARMS AND THIS IS NEW TO ME. THANKS FOR YOUR HELP!!

Last edited by mhn old gun guy; 09-02-2020 at 05:52 PM. Reason: NEW INFO
Reply With Quote
  #6  
Old 09-01-2020, 10:52 PM
mmaher94087 mmaher94087 is offline
SWCA Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2006
Location: Arizona
Posts: 3,562
Likes: 4
Liked 2,494 Times in 1,296 Posts
Default

Please be careful removing the grips as there is a pin at the bottom that will crack or break the grip if removed incorrectly. Loosen the screw about three turns and lightly tap the screw with the screwdriver handle. This will loosen the off-side panel. Once that is removed then one can tap the lower edge of the grip on the inside to remove it with no damage.
__________________
Mike Maher #283
Reply With Quote
The Following User Likes This Post:
  #7  
Old 09-02-2020, 05:53 PM
mhn old gun guy mhn old gun guy is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Sep 2016
Posts: 4
Likes: 0
Liked 0 Times in 0 Posts
Default DOUBLE ACTION 44 SERIAL #'S

PLEASE SEE EDITED REPLY ABOVE. THANKS AGAIN!
Reply With Quote
  #8  
Old 09-02-2020, 09:33 PM
glowe's Avatar
glowe glowe is online now
US Veteran

DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,260 Times in 5,435 Posts
Default

Quote:
Originally Posted by mhn old gun guy View Post
. . . TO: GLOWE, GARY 2515. I TOOK THE GRIPS OFF TODAY. THERE ARE NO #'S. THERE IS A GRIND MARK JUST BELOW THE GRIP SCREW ON THE RIGHT GRIP. THIS BRINGS ANOTHER QUESTION AS HOW DO YOU STAMP #'S ON HARD RUBBER?? HEAT?? DO SCHOFIELDS, AMERICANS ETC HAVE THESE SAME GRIP #'S. I COLLECTED ANTIQUE MILITARY LONGARMS AND THIS IS NEW TO ME. THANKS FOR YOUR HELP!!
Hard rubber stocks were stamped after manufacture. I would guess that they would not have been heated. Most that I have show numbers that are very lightly struck. Also, after a hundred years, those stocks are probably a lot more brittle than when they were manufactured. Lots of earlier models were wood stocked, but were all number stamped all the way back to Model 1 tip-ups.
__________________
Gary
SWCA 2515
Reply With Quote
  #9  
Old 09-03-2020, 12:05 AM
iby iby is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Jan 2010
Posts: 930
Likes: 2,054
Liked 828 Times in 334 Posts
Default

Quote:
Originally Posted by glowe View Post
Hard rubber stocks were stamped after manufacture. I would guess that they would not have been heated. Most that I have show numbers that are very lightly struck. Also, after a hundred years, those stocks are probably a lot more brittle than when they were manufactured. Lots of earlier models were wood stocked, but were all number stamped all the way back to Model 1 tip-ups.
I have not yet seen ANY hard rubber grips with stamped #'s
Any manufacturer.
Reply With Quote
  #10  
Old 09-03-2020, 02:19 AM
Oyeboteb Oyeboteb is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Jun 2009
Posts: 1,535
Likes: 6
Liked 862 Times in 379 Posts
Default

Quote:
Originally Posted by iby View Post
I have not yet seen ANY hard rubber grips with stamped #'s
Any manufacturer.
I have not seen any either...the Serial Numbers of all I have seen were lightly scratched on, not stamped.

I doubt anyone would have stamped Hard Rubber Stocks, it would be too liable to crack them from the force needed...even when brand new, the Material was quite hard and not yielding.

No one stamped Mother of Pearl or Ivory Stocks similarly.

Wood Stocks are easy and safe to stamp.

These other materials, are not.
Reply With Quote
  #11  
Old 09-03-2020, 10:11 AM
glowe's Avatar
glowe glowe is online now
US Veteran

DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,260 Times in 5,435 Posts
Default

Never say never. I sold a lot of my antique S&Ws, but recall that I saw some stamped numbers on my antique DA hard rubber stocks. Number wize you are correct, but in my mind that was because most S&W hard rubber stocks were produced post-1900 when they did not stamp any stocks. Maybe I had some oddities, but they were real to me.

I do not know how many I still have with number stamps, and stopped when I found this 32 DA example of a stamped stock, without a doubt using S&W old-time number style stamps. So let's agree that all wood stocks pre-1900 were stamped and more than zero hard rubber stamps were stamped as well. My notes do state that they were serial number stamped prior to 1900, but after the company re-started stamping stocks around 1929 hard rubber and other materials were either penciled, stamped or scratched on, while wood was stamped.

As for the potential of breaking them, fresh hard rubber was very strong and somewhat pliable as well. It would have only taken a simple cushion to protect the stock from breakage.

Attached Images
File Type: jpg P1010002.jpg (86.0 KB, 52 views)
__________________
Gary
SWCA 2515

Last edited by glowe; 09-03-2020 at 02:53 PM. Reason: Trying to enlarge photo
Reply With Quote
The Following 3 Users Like Post:
  #12  
Old 09-03-2020, 11:20 AM
mhn old gun guy mhn old gun guy is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Sep 2016
Posts: 4
Likes: 0
Liked 0 Times in 0 Posts
Default

THANK YOU EVERYONE FOR THE DISCUSSION. I GUESS IT WILL NOT AFFECT VALUE ONE WAY OR THE OTHER IF I SELL IT. I HAVE ALWAYS ASSUMED THIS TO BE ORIGINAL AND UNTOUCHED.
Reply With Quote
  #13  
Old 09-03-2020, 01:34 PM
iby iby is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Jan 2010
Posts: 930
Likes: 2,054
Liked 828 Times in 334 Posts
Default stamps

Quote:
Originally Posted by glowe View Post
Never say never. I sold a lot of my antique S&Ws, but recall that I saw some stamped numbers on my antique DA hard rubber stocks. Number-size you are correct, but in my mind that was because most S&W hard rubber stocks were produced post-1900 when they did not stamp any stocks. Maybe I had some oddities, but they were real to me.

I do not know how many I still have with number stamps, and stopped when I found this 32 DA example of a stamped stock, without a doubt using S&W old-time number style stamps. So let's agree that all wood stocks pre-1900 were stamped and more than zero hard rubber stamps were stamped as well. My notes do state that they were serial number stamped prior to 1900, but after the company re-started stamping stocks around 1929 hard rubber and other materials were either penciled, stamped or scratched on, while wood was stamped.

As for the potential of breaking them, fresh hard rubber was very strong and somewhat pliable as well. It would have only taken a simple cushion to protect the stock from breakage.

Thank you Gary
I have NOW seen stamped hard rubber
Reply With Quote
The Following User Likes This Post:
  #14  
Old 09-03-2020, 02:17 PM
deadin's Avatar
deadin deadin is offline
US Veteran
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2004
Location: Ocean Shores, WA, USA
Posts: 5,775
Likes: 201
Liked 5,063 Times in 1,767 Posts
Default

Now you're going to make me go start pulling stocks and look for numbers.......
__________________
Dean
SWCA #680 SWHF #446
Reply With Quote
The Following User Likes This Post:
  #15  
Old 09-03-2020, 03:05 PM
glowe's Avatar
glowe glowe is online now
US Veteran

DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,260 Times in 5,435 Posts
Default

Quote:
Originally Posted by deadin View Post
Now you're going to make me go start pulling stocks and look for numbers.......
I want to do more research on this topic, and my notes are easily edited if, in fact, the antique hard rubber stocks had the option of scratched or stamped?? Anyone wanting to check their pre-1900 stocks, please let me know what you find?
__________________
Gary
SWCA 2515
Reply With Quote
  #16  
Old 09-03-2020, 08:29 PM
deadin's Avatar
deadin deadin is offline
US Veteran
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2004
Location: Ocean Shores, WA, USA
Posts: 5,775
Likes: 201
Liked 5,063 Times in 1,767 Posts
Default

OK Gary
I’ve been pulling stocks on guns from around the turn of the century. (I didn’t find as many as I thought I had, but here they are:
1st Model Single Shot #19056 no mark
.44 DA Frontier #11808 Scratched matching (Shipped 12/1900)
.38 DA 2nd Model #29300 Scratched matching
.32 DA 2nd Model #20047 No Mark
.32 Safety 2nd Model #116020 Scratched matching (These weren’t produced till 1902, so there goes the 1900 and earlier theory…)

I also have a set of Hard Rubber stocks that fit a K Frame that are scratched with #16729. This is about ¾ of the way through the serials from production of the 1st Model Hand Ejector. (I tried them on the 44 DA and the locating pin is in the wrong place. They fit fine on a M1902 HE. What do you think? Pre or Post 1900??

Dean
__________________
Dean
SWCA #680 SWHF #446
Reply With Quote
The Following 2 Users Like Post:
  #17  
Old 09-04-2020, 09:13 AM
glowe's Avatar
glowe glowe is online now
US Veteran

DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,260 Times in 5,435 Posts
Default

Thanks Dean, I will edit my notes to include scratched serial numbers for late 1800s top-breaks. It looks like you have three listed that fall into the pre-1900 era, your 44 DA, 38 DA, and 32 DA. The rest of yours appear to date 1900 or later, so should have the scratched numbers. I think your single shot is post-1900 if it is a Model 1891, and could have had pencil which would have been easily wiped off from the hard rubber stocks.

As for your K frame stocks not fitting your 44 DA, I did this the same thing on two 44 DAs over the years. I had a 44 Russian and still have a Frontier DA with non-original stocks and purchased two sets of original early-1900s round butt hard rubber M&P stocks and put them on each gun. Both fit the pin but one was slightly undersized. I would guess the pin on your 44 DA was drilled slightly off. No problem with fitting a new stock back then because they were hand fitted and the pin hole was drilled on every set of stocks installed, then shaped to fit the butt-frame. I once had an old M&P that I bought with broken stocks and no set of K frame stocks would fit correctly since the pin was drilled too low. Every set I tried left a sizeable gap at the top and the stocks extended below the butt. I had to fill the holes with epoxy and re-drill a set in order to fit the M&P.
__________________
Gary
SWCA 2515
Reply With Quote
  #18  
Old 09-04-2020, 11:23 AM
deadin's Avatar
deadin deadin is offline
US Veteran
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2004
Location: Ocean Shores, WA, USA
Posts: 5,775
Likes: 201
Liked 5,063 Times in 1,767 Posts
Default

Gary,
I also have a Single Shot 2nd Model that shipped in 1910 that has unmarked stocks.
__________________
Dean
SWCA #680 SWHF #446
Reply With Quote
The Following User Likes This Post:
  #19  
Old 09-04-2020, 01:48 PM
Kinman's Avatar
Kinman Kinman is online now
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Jul 2010
Location: Spokantucky
Posts: 4,099
Likes: 10,351
Liked 6,901 Times in 2,335 Posts
Default

I pulled the stocks on my 1st Model D.A. .44 Russian #18772, the matching numbers are very legibly scratched onto the right hand stock.
Reply With Quote
The Following User Likes This Post:
  #20  
Old 09-04-2020, 05:28 PM
glowe's Avatar
glowe glowe is online now
US Veteran

DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Nov 2009
Location: Michigan Western UP
Posts: 12,916
Likes: 3,028
Liked 14,260 Times in 5,435 Posts
Default

Quote:
Originally Posted by deadin View Post
Gary,
I also have a Single Shot 2nd Model that shipped in 1910 that has unmarked stocks.
I wish I knew more about target stocks and how they were treated during manufacture for early Twentieth Century guns. We see lots of target style stocks from 1900 into the post-WWII era without any numbers applied. I can only guess that the way they were made, no fitting was required and maybe they were just available to put on any revolver ordered with such stocks. No need for fitting and therefore no need for them to be separated from the gun during finishing.
__________________
Gary
SWCA 2515
Reply With Quote
  #21  
Old 09-04-2020, 06:11 PM
Oyeboteb Oyeboteb is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Jun 2009
Posts: 1,535
Likes: 6
Liked 862 Times in 379 Posts
Default

Quote:
Originally Posted by glowe View Post
Never say never. I sold a lot of my antique S&Ws, but recall that I saw some stamped numbers on my antique DA hard rubber stocks. Number wize you are correct, but in my mind that was because most S&W hard rubber stocks were produced post-1900 when they did not stamp any stocks. Maybe I had some oddities, but they were real to me.

I do not know how many I still have with number stamps, and stopped when I found this 32 DA example of a stamped stock, without a doubt using S&W old-time number style stamps. So let's agree that all wood stocks pre-1900 were stamped and more than zero hard rubber stamps were stamped as well. My notes do state that they were serial number stamped prior to 1900, but after the company re-started stamping stocks around 1929 hard rubber and other materials were either penciled, stamped or scratched on, while wood was stamped.

As for the potential of breaking them, fresh hard rubber was very strong and somewhat pliable as well. It would have only taken a simple cushion to protect the stock from breakage.

Oh my!

Yes, I am sorry, I did mis-speak and mis-remember earlier.

I have seen this, and I even have one which is Stamped Hard Rubber...somehow I was just not thinking right.

Well, as Roseanne Roseanadanna used to say...

"Never mind!"

Lol...
Reply With Quote
The Following User Likes This Post:
  #22  
Old 09-04-2020, 06:13 PM
Oyeboteb Oyeboteb is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Jun 2009
Posts: 1,535
Likes: 6
Liked 862 Times in 379 Posts
Default

Quote:
Originally Posted by glowe View Post
Thanks Dean, I will edit my notes to include scratched serial numbers for late 1800s top-breaks. It looks like you have three listed that fall into the pre-1900 era, your 44 DA, 38 DA, and 32 DA. The rest of yours appear to date 1900 or later, so should have the scratched numbers. I think your single shot is post-1900 if it is a Model 1891, and could have had pencil which would have been easily wiped off from the hard rubber stocks.

As for your K frame stocks not fitting your 44 DA, I did this the same thing on two 44 DAs over the years. I had a 44 Russian and still have a Frontier DA with non-original stocks and purchased two sets of original early-1900s round butt hard rubber M&P stocks and put them on each gun. Both fit the pin but one was slightly undersized. I would guess the pin on your 44 DA was drilled slightly off. No problem with fitting a new stock back then because they were hand fitted and the pin hole was drilled on every set of stocks installed, then shaped to fit the butt-frame. I once had an old M&P that I bought with broken stocks and no set of K frame stocks would fit correctly since the pin was drilled too low. Every set I tried left a sizeable gap at the top and the stocks extended below the butt. I had to fill the holes with epoxy and re-drill a set in order to fit the M&P.
Other than minding the Pin, WWII plain Walnut Victory Stocks are easy to sculpt down at the end 'heel' to fir perfectly for the big Frame "DA"s...and they look great on them!
Reply With Quote
  #23  
Old 09-04-2020, 06:14 PM
BMur BMur is online now
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Sep 2017
Posts: 2,845
Likes: 1,779
Liked 4,511 Times in 1,658 Posts
Default Late entry

Sorry for the late entry,
I've been following this thread and wanted to post but waited until I could look at some of my stocks.
It seems to me that there isn't much to go on as far as a time frame? Some early stocks are not marked whatsoever. Some are number scratched, some are stamped. I photo'd 32 hammerless grips that are stamped, 38 grips that are both stamped and scratched, Baby Russian grips that have no markings whatsoever and looks original to me, and 1 1/2 32cf grips that are also not marked.

I have so many grips in my spare box that I'd have to post 30 photos. But the same goes with 44 D/A grips and S/A grips. Most of those are scratched.
The M&P grips are definitely post 1900 and they are stamped. I'll post two separate photos.

Also, the couple pair of M&P stocks that are stamped? one has a very late serial number that is way post 1900? So, perhaps we are following different line workers methods? One person likes to scratch, another likes to stamp and still another likes being lazy and not marking the stocks at all? I don't know but it is interesting.

Murph

Last edited by BMur; 09-04-2020 at 06:16 PM.
Reply With Quote
  #24  
Old 09-04-2020, 06:17 PM
BMur BMur is online now
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Sep 2017
Posts: 2,845
Likes: 1,779
Liked 4,511 Times in 1,658 Posts
Default Photo set 2

More photos. Baby Russian, 1 1/2 32 cf.

Also, notice the very late 877146 M&P grips?

Murph

Last edited by BMur; 09-04-2020 at 06:20 PM.
Reply With Quote
  #25  
Old 09-04-2020, 06:34 PM
Oyeboteb Oyeboteb is offline
Member
DOUBLE ACTION 44-40 FRONTIER SERIAL #'S  
Join Date: Jun 2009
Posts: 1,535
Likes: 6
Liked 862 Times in 379 Posts
Default

Quote:
Originally Posted by glowe View Post
I wish I knew more about target stocks and how they were treated during manufacture for early Twentieth Century guns. We see lots of target style stocks from 1900 into the post-WWII era without any numbers applied. I can only guess that the way they were made, no fitting was required and maybe they were just available to put on any revolver ordered with such stocks. No need for fitting and therefore no need for them to be separated from the gun during finishing.
The Stocks would still have to be fitted and also somehow identified to, or kept with, the Target Pistol or Target Revolver.

Given that Hammer Group and Trigger, the Hand and other small internal parts were also fitted, and not numbered to the Hand Gun...I'd have to think they likely had some kind of Padded Tray method with an ID Tag for keeping a given Serial Number's small parts identified to the Revolver or Single-shot Pistol which they belonged to.

But why then number the Stocks?

I don't know!

Lol...

Edited to add -

Or...small parts to be fitted to the Revolver or Pistol, were fitted after the Gun was 'finished' ( Blue, Nickel, etc ) with no need then to have to keep them identified to that individual Gun...probably this was easiest and most efficient.

Leaving then only the Stocks to be Numbered to the Gun's other major components, since the Stocks would be fitted to the Grip Frame while it was still in-the-white, and prior to it being finished.

Last edited by Oyeboteb; 09-06-2020 at 01:44 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB Double Action Frontier 44-40 Askeladden WANTED to Buy 0 07-23-2014 10:12 PM
44 double action frontier grnhs S&W Antiques 4 11-06-2010 09:46 AM
44 Double Action Frontier Dan M S&W Antiques 6 10-11-2010 01:12 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:26 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)