Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Hand Ejectors: 1896 to 1961
o

Notices

S&W Hand Ejectors: 1896 to 1961 All 5-Screw & Vintage 4-Screw SWING-OUT Cylinder REVOLVERS, and the 35 Autos and 32 Autos


Reply
 
Thread Tools Display Modes
  #101  
Old 12-22-2013, 12:21 AM
mbliss57's Avatar
mbliss57 mbliss57 is offline
US Veteran
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jan 2012
Location: Desert South West
Posts: 5,540
Likes: 7,356
Liked 8,688 Times in 2,312 Posts
Default

Quote:
Originally Posted by Black_Talon View Post
Didn't we have these MIM pro/con discussions ad-nauseam a few years back? Does this need to be rehashed?
This is not IMO a "what is wrong with MIM" as much as the differences and process of each. The MIM vs Forged debate is dumb. Forged parts are stronger. MIM parts are cheaper. More money gets a better/ stronger guns in every inch of the revolver/semi auto. It doesn't get a cheaper one. So there is no debate on which is better. Only on if we can afford all guns made with only forged parts or if all forged parts have the need to be forged.

Edit: There are many new members that probably would like to know what this discussion means to them as gun owners.
__________________
John 1:17
NRA Life Benefactor

Last edited by mbliss57; 12-22-2013 at 12:46 AM.
Reply With Quote
  #102  
Old 12-22-2013, 08:26 AM
jaymoore's Avatar
jaymoore jaymoore is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Aug 2012
Location: US of A
Posts: 2,206
Likes: 6,984
Liked 2,474 Times in 1,144 Posts
Default

Quote:
Originally Posted by mbliss57 View Post
Edit: There are many new members that probably would like to know what this discussion means to them as gun owners.
Practically speaking? Little to nothing! Except that MIM parts are more likely to be drop in replacements should the need arise. It seems that the the newer bolts are finding favor with the IPSC and ICORE shooters over the old style. (Ref., for instance, the Brian Enos revolver forum for more detailed discussion for what works under speed and with high round counts.)

Probably the most signifigant improvement S&W has made over the years is the adoption of more heat treated parts. Frames, yes, but more so the smaller components. However, it's an invisible change so doesn't attract much attention.
Reply With Quote
  #103  
Old 12-22-2013, 12:51 PM
Doug M.'s Avatar
Doug M. Doug M. is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: May 2008
Location: Washington State
Posts: 7,445
Likes: 14,499
Liked 9,263 Times in 3,702 Posts
Default

Quote:
Originally Posted by Abwehr View Post
...
But, what about some of the latest aluminum alloy with Lithium. I know Li-Al is know the world over, but there are some "recipies" of Al-Li that is proprietory and have the ability to reach 50-60 kps. The material being lighter and stronger than other aluminum alloys. The only problem with the strength is that it is in one direction. What are the thoughts from other with Li-Al in firearms?
*
Lithium/aluminum alloy in firearms? I am not familiar with such. Can you tell me what makers are using this, and in what firearms? I am utterly ignorant of this, and curious.
__________________
NHI, 10-8.
Reply With Quote
  #104  
Old 12-22-2013, 02:21 PM
Abwehr Abwehr is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Feb 2009
Posts: 7
Likes: 0
Liked 0 Times in 0 Posts
Default

DougM,

Currently, there are none of the AL-LI alloys being used on firarms, but with the low weight factor, and strength it has (in certain directions according how it is manufactured) of low carbon steel, it may have a use in firearms. I know it is used in the NASA program, and major aircraft manufacturers. I was not sure if anyone had presented any Papers on the use in firearms. Due to the stress factors on firearms, it could be machined to match these stresses. I know it could be used in the AR receivers and be much stronger than the what is currently being used. But is any additional strength needed on the AR.
Reply With Quote
  #105  
Old 12-22-2013, 05:19 PM
Doug M.'s Avatar
Doug M. Doug M. is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: May 2008
Location: Washington State
Posts: 7,445
Likes: 14,499
Liked 9,263 Times in 3,702 Posts
Default

Thanks. I wonder if it would be a good choice for certain components, depending on how it resists stresses of different types.
__________________
NHI, 10-8.
Reply With Quote
  #106  
Old 12-22-2013, 10:48 PM
BigBill BigBill is offline
Absent Comrade
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,353 Times in 5,549 Posts
Default

What does MIM mean? Is it casted parts vs machined parts? They do harden both parts right?

If there on the ball with there CAD Systems they can run the stress part of the program and reduce costs in some areas were there design is over kill.

Last edited by BigBill; 12-22-2013 at 10:53 PM.
Reply With Quote
  #107  
Old 12-22-2013, 11:24 PM
mbliss57's Avatar
mbliss57 mbliss57 is offline
US Veteran
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jan 2012
Location: Desert South West
Posts: 5,540
Likes: 7,356
Liked 8,688 Times in 2,312 Posts
Default

MIM= Metal Injection molding see post #83 for a link to process diagram.
Neither cast nor forged. Not as strong as either.. I would be surprised if they did not run 2D or 3D stress modeling to determine stressed areas and design to exceed those stresses.
__________________
John 1:17
NRA Life Benefactor

Last edited by mbliss57; 12-23-2013 at 12:21 AM.
Reply With Quote
The Following User Likes This Post:
  #108  
Old 12-23-2013, 12:33 AM
BillyMagg BillyMagg is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jun 2012
Location: Central Obamastan
Posts: 1,052
Likes: 16,749
Liked 801 Times in 419 Posts
Talking

Quote:
Originally Posted by rjb1 View Post
As an engineering professor I agree that this is really excellent information. It's to some degree a synopsis of two upper-level mechanical engineering courses: "Design of Machine Elements" and "Manufacturing Processes".
What he said is what you hope that the students pick up to the extent possible.
The only slight addition is historical, not technical, and that is that the 8620 chromium, molybdenum, nickel alloy actually pre-dates M-14's and was used in M1 Garands back into the 1930's.
(Also, current-generation ME's are really good at both speaking and writing.)
Quite right, this is an outstanding thread on fine steel and aluminum, but of course we will never convince the true believers in investment casting, but hey, somebody's gotta buy those guns, and that just means more Smith and Wesson's for the rest of us. LOL

There are several AEs and MEs that post on the Sino Defense forum, they write and present quite well, after doing my own welder and bailing wire engineering/fabrication, I came to the conclusion that the engineers were usually right, the sideline commentaries,,,,, not so much!
Reply With Quote
The Following 2 Users Like Post:
  #109  
Old 12-23-2013, 08:09 AM
jaymoore's Avatar
jaymoore jaymoore is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Aug 2012
Location: US of A
Posts: 2,206
Likes: 6,984
Liked 2,474 Times in 1,144 Posts
Default

Quote:
Originally Posted by rjb1 View Post
As an engineering professor I agree that this is really excellent information. It's to some degree a synopsis of two upper-level mechanical engineering courses: "Design of Machine Elements" and "Manufacturing Processes".
What he said is what you hope that the students pick up to the extent possible.
The only slight addition is historical, not technical, and that is that the 8620 chromium, molybdenum, nickel alloy actually pre-dates M-14's and was used in M1 Garands back into the 1930's.
(Also, current-generation ME's are really good at both speaking and writing.)
I just ran across this old photo whilst linking a linseed oil cleaner photo to another thread. Don't remember why it was taken, except it's got some great reference material. (Newest is probably 1980s, but some things don't get better in newer editions. Like Timoshenko's book: the first edition was the best.)


Spotts' book ain't bad. Which is why it's still about the house, I guess.

Last edited by jaymoore; 12-23-2013 at 08:11 AM.
Reply With Quote
The Following 3 Users Like Post:
  #110  
Old 12-23-2013, 01:00 PM
mjdupuis's Avatar
mjdupuis mjdupuis is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Dec 2012
Posts: 95
Likes: 201
Liked 62 Times in 30 Posts
Default

Very interesting information. If I read this correctly, stainless steel is not as good as normal blued steel in revolvers.
Would this apply to rifles as well; would a stainless action and barrel in a rifle be a step down from the regular steel as far as durability and long term life (beside the all-weather properties of stainless)?
Reply With Quote
  #111  
Old 12-23-2013, 01:13 PM
SweetMK's Avatar
SweetMK SweetMK is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Oct 2012
Location: Near Roanoke VA
Posts: 1,732
Likes: 1,025
Liked 2,681 Times in 960 Posts
Default

Quote:
Originally Posted by mjdupuis View Post
Very interesting information. If I read this correctly, stainless steel is not as good as normal blued steel in revolvers.
Would this apply to rifles as well; would a stainless action and barrel in a rifle be a step down from the regular steel as far as durability and long term life (beside the all-weather properties of stainless)?
Stainless is a "tradeoff" material, you trade one trait for another.

In this case, you trade corrosion resistance for strength.

Strength is not the main issue with stainless.

Galling is the real issue;

Galling - Wikipedia, the free encyclopedia

IIRC, AMT had major issues with galling, it was kinda the downfall of the company.
(Did AMT make anything that was not stainless?? )

I love stainless, I doubt I will buy any gun that is not stainless, unless it is at gift price.



Since the original S&W's have some margin in the strength of the blued guns, a little of the margin is used to allow a nice stainless to be made to the same dimensions.

THEN, we could discuss how much more difficult stainless is to machine,,,,,,,,,,,
Reply With Quote
The Following 2 Users Like Post:
  #112  
Old 12-23-2013, 02:08 PM
gunbob1911 gunbob1911 is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Dec 2011
Posts: 11
Likes: 1
Liked 1 Time in 1 Post
Default

Very interesting read. I am not an Engineer and most of this stuff printed here is 'way over my head ". I am a retired LE 30 years and love wheel guns, S&W, Colt, Ruger in that order. I always kinda looked down on a Ruger because one of the reasons is it a "cheap" investment cast frame you see. A few years ago I took a Revolver tuning class at an accredited Gunsmithing school. Our instructor was a retired Captain and Gunsmith for the Colorado State Patrol with 40 years plus experience with wheel guns used in LE and related this story to our class. Having access to lots of guns from the property room that were confiscated for various reasons they decided to do a little"experiment ". Using bullseye powder they filled the case to the top of a.357 magnum, and seated a 158 grain bullet. S&W, Colt and Ruger wheelguns where put through a torture test to see which guns if any could survive it. The guns where place in a fixture and fired by using a string on the trigger from a safe distance. Too make a long story short the S&W and Colt which are "forgings" where quickly destroyed while the Ruger was not. They could not compress enough powder in the case to blow up the Ruger. They also backed over it with a 3/4 ton pickup and the gun still functioned . To me the 'proof is in the pudding". I have not ever owned a Ruger wheel gun but every once in a while at the LGS I will pick one up and check it out thinking you know if I ever go to Alaska I think I would bring one of these because it will probably survive being dropped a long way or shot with mud in the barrel or even accidentally being run over by a truck. I have witnessed this myself when the gun is placed on the hood or roof of the vehicle then only to be run over by the Driver who "forgot. "Stuff happens " and I would trust that Ruger to be there for me if one is depending on it for self defense against a big critter that could have you for lunch. Thanks, one mans opinion.
Reply With Quote
The Following User Likes This Post:
  #113  
Old 12-23-2013, 02:17 PM
Pondoro Pondoro is offline
Member
An Engineer's take on S&W.  
Join Date: Feb 2001
Location: Midwest
Posts: 576
Likes: 375
Liked 678 Times in 247 Posts
Default

One thing that has not been discussed here. I am an engineer, so I respect them, but they cannot predict the future. Smith made guns for decades using forged parts. These parts wear out, but the wear out rates are slow and predictable, because we have hindsight. MIM and polymer parts are not as predictable, simply because we do not have millions of guns built over five or six decades to help us predict.

Aviation is adopting MIM and printed parts and polymer parts right now to save weight (which saves fuel). But safety critical parts are tracked and all manufacturers run test "endurance" engines to show what these parts will look like after thousands of flights. If you fly on a plane powered by the new "XYZ" engine and your plane has an engine with 2,000 flights on it then you know that "papa" engine manufacturer got more than 2,000 flights on a ground test engine. If a safety critical part fails on a ground test engine or even shows unexpected distress in an overhaul we go after every part in the fleet and replace them. No one is doing this with guns that I know of. So I worry what is the life expectancy of a polymer framed gun? If the frame cracks after 25 years and I am an LEO I will get a new one and be glad the old one (which I carried every day) was light. But if the frame cracks and I am a collector I may not be able to replace that gun. We could say the same about MIM parts and printed parts - they may have failure modes that we simply do not expect. So for collecting and long-term shooting I think a bias towards forged is somewhat reasonable.

It is never obvious how much strength is enough. You want a factor of safety but how much do you need? It is difficult to predict what the users will do. Investment cast guns have been made by Ruger for decades, and I do not hear tales of Rugers blowing up, so if they give up some strength to forgings they are compensating somewhere. Rugers do often seem a bit larger than Smiths, in the thinnest areas.

Last edited by Pondoro; 12-24-2013 at 02:49 PM.
Reply With Quote
The Following User Likes This Post:
  #114  
Old 12-23-2013, 02:47 PM
Pondoro Pondoro is offline
Member
An Engineer's take on S&W.  
Join Date: Feb 2001
Location: Midwest
Posts: 576
Likes: 375
Liked 678 Times in 247 Posts
Default

Quote:
Originally Posted by jaymoore View Post
I just ran across this old photo whilst linking a linseed oil cleaner photo to another thread. Don't remember why it was taken, except it's got some great reference material. (Newest is probably 1980s, but some things don't get better in newer editions. Like Timoshenko's book: the first edition was the best.)


Spotts' book ain't bad. Which is why it's still about the house, I guess.
Is the 4th from the bottom Shigley? I have one that cost $33, I have my father's copy which cost $7.95, and I had a young engineer who worked for me whose copy cost $120.
Reply With Quote
The Following 2 Users Like Post:
  #115  
Old 12-23-2013, 07:39 PM
jaymoore's Avatar
jaymoore jaymoore is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Aug 2012
Location: US of A
Posts: 2,206
Likes: 6,984
Liked 2,474 Times in 1,144 Posts
Default

Quote:
Originally Posted by Pondoro View Post
Is the 4th from the bottom Shigley? I have one that cost $33, I have my father's copy which cost $7.95, and I had a young engineer who worked for me whose copy cost $120.
Yes. It's probably got the price sticker inside, but I'm not within 30 miles of it right now. Probably closer to the US$33 mark, but it's hard to remember. I tried to buy books used whilst in "trade school" and the habit has remained!

As far as unexpected failure modes go, I'd include aluminum alloys in the list. Might take some photos of aluminum that now looks like splintered wood! Even the aluminum that's not "exploded" tends to age harden.

Last edited by jaymoore; 12-23-2013 at 07:44 PM.
Reply With Quote
  #116  
Old 12-23-2013, 09:14 PM
rjb1 rjb1 is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Nov 2010
Posts: 109
Likes: 0
Liked 70 Times in 36 Posts
Default

That is an edition of Shigley, but can't say which it is. A GREAT series of machine design texts. I still have the edition that I used as an undergrad and I have used it so much since that it is falling apart.
Anyone here, engineer or not, who wants to learn a good bit about the subjects being discussed in this thread would be well-advised to pick up one or more of the various editions of Shigley.
His books had such a good reputation that new editions with his name on them were being published a decade after he died.

Aluminum alloys don't have an "endurance limit", as do steels, so they will fail at some point due to fatigue if you keep on stressing them. (See Shigley, 2nd Ed. Page 160, "Fatigue Strength and Endurance Limit".)
The key is to design using a high enough number of fatigue cycles to allow for a "sufficient" lifespan for the item in question. This is a design decision, and is not based on an inherent property of the material, as you could use for steel.
Reply With Quote
The Following User Likes This Post:
  #117  
Old 12-24-2013, 02:47 AM
Jim Watson Jim Watson is offline
Member
 
Join Date: Jun 2001
Location: Florence, Alabama, USA
Posts: 2,333
Likes: 40
Liked 1,381 Times in 766 Posts
Default

"But if the frame cracks and I am a collector I may not be able to replace that gun."

I read an automobile collector to say something of the sort.

He pointed to his daily driver, a new Lincoln and said "This car is mostly sheet metal stampings and plastic. When the warehouse runs out of spare parts, it is done for." Indicating his elderly Packard, he said "But as long as I can hire a machinist, a carpenter, and a seamstress, I can keep this one looking and running like new indefinitely."
Reply With Quote
The Following User Likes This Post:
  #118  
Old 12-24-2013, 03:35 AM
Oyeboteb Oyeboteb is offline
Member
An Engineer's take on S&W.  
Join Date: Jun 2009
Posts: 1,535
Likes: 6
Liked 862 Times in 379 Posts
Default

Quote:
Originally Posted by Jim Watson View Post
"But if the frame cracks and I am a collector I may not be able to replace that gun."

I read an automobile collector to say something of the sort.

He pointed to his daily driver, a new Lincoln and said "This car is mostly sheet metal stampings and plastic. When the warehouse runs out of spare parts, it is done for." Indicating his elderly Packard, he said "But as long as I can hire a machinist, a carpenter, and a seamstress, I can keep this one looking and running like new indefinitely."
Tell him to get a 'teens or 'twenties Dodge ( with the 'Budd' All-Steel Body ).

He can get on fine then, indefinitely, with out the Carpenter.

And he is welcome to 'Ask the Man who owns one!"

Lol...

I had a '26 Dodge Roadster for a short time, some years ago. Absolutely marvelous workmanship and design and fit through out. Stamped Steel Disc Wheels, no Wood anywhere in or on it.

It had sat outdoors in the weather here in Las Vegas for almost 60 years, and, the Doors still functioned perfectly, closed 'Like a Bank Vault', same with the Trunk and Hood and so on, none of the woes which thin Sheetmetal nailed on to Wood Frames have.

I accept that modern cars have 'advanced or sophisticated engineering'.

The most boring, totally uninspiring, and anticlimactic 'engineering' I could ever hope to have to stomach.

None of which will endure, and none of which will inspire anyone, 60 or 80 or 100 years from now.

A Hundred years from now? 200 years from now? 300 years from now? There will be more Ford Model T Automobiles, up and running, Get-in-and-go, than viable/running 'survivors' of the 33 year total of all makes and models made from 1980 to the present.


Yes, present day cars work well, in their way, as what they ( actually ) are, an expensive 'Bic Razor' which one uses and throws away...and, they are a total bore, from every view inside and out, underneath, hood open, hood closed, every detail inside and out, on any road, any weather, any time, day or night, a total boring ridiculously over-complicated throw away item, devoid of any memorable or substantial character, genius, or individuality. All 'value engineering' and slick marketing and a nightmare - or just depressing - to Work on.

Ohhhhh, golly...so it goes...

Nothing against Packards ( I do love them afterall! ), but, it this were 1926 and I were intending to drive from LA to New York, and back, I'd have bought a new or used mid '20s Dodge Roadster..!

Last edited by Oyeboteb; 12-24-2013 at 03:49 AM.
Reply With Quote
The Following User Likes This Post:
  #119  
Old 12-24-2013, 11:25 AM
mbliss57's Avatar
mbliss57 mbliss57 is offline
US Veteran
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jan 2012
Location: Desert South West
Posts: 5,540
Likes: 7,356
Liked 8,688 Times in 2,312 Posts
Default

I made that analogy... And every analogy breaks down at some point.
It's wasn't the best analogy buy all I could come up with at the time.

OVEBOTEB....you kind of make my original point though. New cars are not collectible but very function even over functional. Classic cars like the classic guns of the forged only era are collectible. The new ones are quite functional, lightweight etc. but will never have that collectible appeal of the forged all steel guns.
__________________
John 1:17
NRA Life Benefactor

Last edited by mbliss57; 12-24-2013 at 11:41 AM.
Reply With Quote
  #120  
Old 12-24-2013, 11:32 AM
DWalt's Avatar
DWalt DWalt is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,949 Times in 14,015 Posts
Default

When we get hit by the EMP, the only things left running on the highway will be bicycles and really old cars. The best car I ever had was a 1952 Chevy - but it eventually died of body rust after over 300,000 miles.
Reply With Quote
  #121  
Old 12-26-2013, 09:19 PM
DrMark's Avatar
DrMark DrMark is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Sep 2006
Location: Virginia
Posts: 101
Likes: 34
Liked 23 Times in 13 Posts
Default

Quote:
Originally Posted by rjb1 View Post
That is an edition of Shigley, but can't say which it is. A GREAT series of machine design texts. I still have the edition that I used as an undergrad and I have used it so much since that it is falling apart.
Anyone here, engineer or not, who wants to learn a good bit about the subjects being discussed in this thread would be well-advised to pick up one or more of the various editions of Shigley.
His books had such a good reputation that new editions with his name on them were being published a decade after he died.
I have a few Shigley texts... definite classics. Timoshenko texts as well...
Reply With Quote
  #122  
Old 12-26-2013, 10:21 PM
steelslaver's Avatar
steelslaver steelslaver is online now
US Veteran
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Oct 2013
Location: Central Montana
Posts: 13,627
Likes: 12,744
Liked 39,097 Times in 9,968 Posts
Default

Quote:
Originally Posted by 44wheelman View Post
One point he is accurate with: "today it is necessary to design to an ever shrinking list of alloys." Crucible Powdered metals recently went bankrupt; a major supplier of the highest grades of composite carbide metals.
That the facility is still running and I know you can obtain steels from several other sources that used the same process as Crucibles excellent CPM steels. I really like some of these steels for high end knife making.

I will say that as High carbon stainless steels did take a big jump in quality using this process.
Reply With Quote
  #123  
Old 05-28-2014, 08:59 PM
siyeh siyeh is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Mar 2014
Posts: 10
Likes: 3
Liked 31 Times in 5 Posts
Default

What a wonderful way to recuperate from knee surgery. Reading every page of this thread has been outstanding. If any of you metal experts see this, I thank you very much for allowing me to read your prose,,,
I have learned so much and one is never to old to learn!
Reply With Quote
The Following 2 Users Like Post:
  #124  
Old 05-28-2014, 11:17 PM
BillyMagg BillyMagg is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jun 2012
Location: Central Obamastan
Posts: 1,052
Likes: 16,749
Liked 801 Times in 419 Posts
Thumbs up

Quote:
Originally Posted by siyeh View Post
What a wonderful way to recuperate from knee surgery. Reading every page of this thread has been outstanding. If any of you metal experts see this, I thank you very much for allowing me to read your prose,,,
I have learned so much and one is never to old to learn!
and your post brought me back, it is a very interesting and informative post, there are some bright gentlemen on the Smith and Wesson forum.
Reply With Quote
  #125  
Old 05-29-2014, 02:10 PM
tftech1 tftech1 is offline
SWCA Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jan 2009
Posts: 129
Likes: 339
Liked 59 Times in 29 Posts
Default Favorite Thread Here?

To Handejector: Let's get this on the list of favorite threads. It contains a wealth of information.
Reply With Quote
The Following 2 Users Like Post:
  #126  
Old 05-29-2014, 04:49 PM
George_in_SD's Avatar
George_in_SD George_in_SD is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Mar 2014
Location: Salt Lake City, UT
Posts: 990
Likes: 86
Liked 1,766 Times in 344 Posts
Default

I'm just now coming across this information, and I find it fascinating. Thank you and your friend for posting this.

These types of discussion are very invigorating, especially to a newer generation collector. Understanding the who, what, when, where, and why to the manufacturing process gives a richness about S&W.
Reply With Quote
  #127  
Old 05-29-2014, 05:39 PM
jinx's Avatar
jinx jinx is offline
US Veteran
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Aug 2012
Location: Wyoming
Posts: 1,088
Likes: 1,253
Liked 995 Times in 456 Posts
Default

WOW! I just came across this older thread. This is one of the most informative reads that I can remember seeing. Also written by some one who knows his business. Being able to translate engineer speak so that people like me can get the gist is almost an art form.
It also makes me realize just how dumb I am.
Reply With Quote
  #128  
Old 05-29-2014, 06:11 PM
BigBill BigBill is offline
Absent Comrade
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,353 Times in 5,549 Posts
Default

Quote:
Originally Posted by Goring's S&W View Post
Thanks for sharing. That was very interesting. I'm glad he said that investment casting is weaker no matter how you look at it. People on the internet can be so ignorant.
Yes when it comes to investment casting vs. forged steel.
My new auto ordnance army 1911a1 with its investment casted
4140 steel frame isn't too shabby. I lubed it with moly and we hammered it for 250rd per two outings for a total of 500rds of flawless operation using Russian ammo. It showed no real noticeable wear yet.

What about my Chinese norinco m14 made from 5100 forged steel with the chrome lined bore and chamber. The Russians actually perfected chrome lining the bores and chambers. There are stories of shooters having between 100k to 200k rounds through there AK 47.

The s&w guns are forged steel. The Springfield armory 1911 are forged steel. The Colts are forged steel.

I think there is a difference between a sock draw gun owner who shoots very little per year and the guy who shoot 3 to 4 times per week. I think some gun manufacturers think investment casting is good enough.(borderline) if your a heavy shooter you would want the best.
Reply With Quote
  #129  
Old 05-29-2014, 06:17 PM
BigBill BigBill is offline
Absent Comrade
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Jan 2011
Location: Planet earth
Posts: 13,869
Likes: 2,079
Liked 13,353 Times in 5,549 Posts
Default

Quote:
Originally Posted by BigBill View Post
Yes when it comes to investment casting vs. forged steel.
My new auto ordnance army 1911a1 with its investment casted
4140 steel frame isn't too shabby. I lubed it with moly and we hammered it for 250rd per two outings for a total of 500rds of flawless operation using Russian ammo. It showed no real noticeable wear yet.

What about my Chinese norinco m14 made from 5100 forged steel with the chrome lined bore and chamber. The Russians actually perfected chrome lining the bores and chambers. There are stories of shooters having between 100k to 200k rounds through there AK 47.

The s&w guns are forged steel. The Springfield armory 1911 are forged steel. The Colts are forged steel.

I think there is a difference between a sock draw gun owner who shoots very little per year and the guy who shoot 3 to 4 times per week. I think some gun manufacturers think investment casting is good enough.(borderline) if your a heavy shooter you would want the best.
I'm not done testing my new AO 1911 but it did better than the gun rags said in there tests.
Reply With Quote
  #130  
Old 05-29-2014, 06:44 PM
rwsmith's Avatar
rwsmith rwsmith is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Dec 2012
Location: (outside) Charleston, SC
Posts: 30,918
Likes: 41,503
Liked 29,156 Times in 13,783 Posts
Default Thank you and thank your friend...

I don't know when I've read such a concentration of quality information. Not even in textbooks.
Reply With Quote
The Following User Likes This Post:
  #131  
Old 12-20-2014, 04:43 PM
perpster perpster is offline
Member
An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W. An Engineer's take on S&W.  
Join Date: Oct 2005
Posts: 610
Likes: 0
Liked 20 Times in 13 Posts
Default

Quote:
Originally Posted by siyeh View Post
What a wonderful way to recuperate from knee surgery. Reading every page of this thread has been outstanding. If any of you metal experts see this, I thank you very much for allowing me to read your prose,,,
I have learned so much and one is never to old to learn!
siyeh, is your new knee forged, investment cast or MIM?

I hope you recovered well.
__________________
NRA Life Member
Reply With Quote
The Following User Likes This Post:
Reply

Tags
1911, 317, 357 magnum, colt, commander, endurance, kimber, m60, military, model 14, model 16, model 60, model 66, n-frame, postwar, ruger, s&w, scandium, sig arms, sile, titanium, trooper

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTS: Engineer from Smith & Wesson blueprints, sketches, equations..ext LewisFamilyFirearms Accessories/Misc - For Sale or Trade 0 03-07-2015 11:30 PM
Lockheed-Martin Engineer met aliens Coldshooter The Lounge 23 11-03-2014 11:06 PM
The Engineer trebor127 The Lounge 22 05-06-2014 12:07 PM
Thanking Blujax and Engineer rwsmith Feedback 0 11-04-2013 10:08 PM
WTT Gerber EOD/Engineer tool for K sq wood finger groove grips or?? GatorFarmer Accessories/Misc - For Sale or Trade 0 06-26-2011 10:49 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:22 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)