Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Hand Ejectors: 1896 to 1961
o

Notices

S&W Hand Ejectors: 1896 to 1961 All 5-Screw & Vintage 4-Screw SWING-OUT Cylinder REVOLVERS, and the 35 Autos and 32 Autos


Reply
 
Thread Tools Display Modes
  #101  
Old 07-24-2020, 09:25 AM
Hondo44 Hondo44 is offline
SWCA Member

1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,815
Liked 20,511 Times in 8,548 Posts
Default

Reportedly only the first ~30,000 Colts had cyl 'charge holes' instead of chambers. That would mean the first 30,000 shipped,, not necessarily #s 1 thru 30000.
__________________
Jim
S&WCA #819
Reply With Quote
The Following User Likes This Post:
  #102  
Old 07-24-2020, 10:35 AM
tenntex32's Avatar
tenntex32 tenntex32 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Nov 2018
Location: North Central Texas
Posts: 1,283
Likes: 925
Liked 2,173 Times in 836 Posts
Default

Quote:
Originally Posted by StrawHat View Post
Granted, I have little to do with Colt firearms, but from what I understand, only the very early Colt Model 1917s had cylinders bored straight through with no headspacing ridge. I am not positive but believe most of those were fitted with new cylinders either by Colt’s or military armorers.

Kevin
Kevin you are correct, only at the beginning of the Colt M1917 contract did Colt use cylinders requiring the use of moonclips. Eventually they started using cylinders with headspacing shoulders in the chambers so they could be fired with or without moonclips such as S&W had done with their M1917 production from the very beginning.

I have an all-original early Colt M1917 example still having the cylinder that requires moonclip use. All of my later serial numbered Colt M1917 examples, as well as my Colt Civilian Model of 1917 examples, have the headspacing shoulders in the chambers.

Just to clarify, the early Colt cylinders that require moonclips were not technically bored straight through. There is a shoulder in the chambers as one would expect on any normal rimmed revolver cartridge chamber. Unfortunately this early shoulder style allows the .45acp round to fall too far into the chamber as to prevent reliable primer ignition. On my early Colt M1917 example it will allow .45acp cartridges to go in about flush with the rear cylinder face instead of sticking out enough to properly headspace.

From what I have read many early Colt M1917 cylinders not having the correct headspacing shoulders in them were swapped out with later style cylinders that did allow one to fire the revolver both with and without moonclips.

Occasionally an early style Colt M1917 still having it's original style cylinder pops up on the radar.

Dale
Attached Images
File Type: jpg EABFAE~1.jpg (83.1 KB, 30 views)
File Type: jpg EA9647~1.jpg (60.4 KB, 29 views)

Last edited by tenntex32; 07-24-2020 at 10:39 AM.
Reply With Quote
The Following 2 Users Like Post:
  #103  
Old 07-24-2020, 11:17 AM
tenntex32's Avatar
tenntex32 tenntex32 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Nov 2018
Location: North Central Texas
Posts: 1,283
Likes: 925
Liked 2,173 Times in 836 Posts
Default

Quote:
Originally Posted by Hondo44 View Post
Reportedly only the first ~30,000 Colts had cyl 'charge holes' instead of chambers. That would mean the first 30,000 shipped,, not necessarily #s 1 thru 30000.
I have seen all kinds of different numbers regarding this. I keep hoping to see something rock solid from Colt such as in a factory letter, but nothing to date.

Of course who knows how many may have survived still having the original cylinder.
Reply With Quote
The Following User Likes This Post:
  #104  
Old 07-24-2020, 11:24 AM
StrawHat's Avatar
StrawHat StrawHat is offline
SWCA Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Jan 2007
Location: Northeast Ohio
Posts: 5,992
Likes: 9,195
Liked 13,464 Times in 3,975 Posts
Default

Quote:
Originally Posted by tenntex32 View Post
...I have an all-original early Colt M1917 example still having the cylinder that requires moonclip use. All of my later serial numbered Colt M1917 examples, as well as my Colt Civilian Model of 1917 examples, have the headspacing shoulders in the chambers....

Dale...
Yours is the first one of which I have heard, not that I have gone out of my way to look for one!

Interesting how they did the first batch of chambering but got it corrected for the rest. Kind of opposite what S&W has done re: the Model 625.

Kevin
__________________
Unshared knowledge is wasted.
Reply With Quote
The Following User Likes This Post:
  #105  
Old 07-24-2020, 11:47 AM
tenntex32's Avatar
tenntex32 tenntex32 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Nov 2018
Location: North Central Texas
Posts: 1,283
Likes: 925
Liked 2,173 Times in 836 Posts
Default

Quote:
Originally Posted by StrawHat View Post
Yours is the first one of which I have heard, not that I have gone out of my way to look for one!

Interesting how they did the first batch of chambering but got it corrected for the rest. Kind of opposite what S&W has done re: the Model 625.

Kevin
Kevin,

I have seen a few but not very many. One thing you have to look out for is that many later style Colt cylinders may have had their original chambers reamed/modified to accept .45Colt ammo.....thus the owners think they may be the early style cylinders. An all-original unmolested early (or later) Colt M1917 cylinder will not properly accept .45Colt ammo.

Here's a pic of my all-original early style Colt cylinder that will not fully accept .45Colt ammo. (It's the same revolver/cylinder as in my previous pic showing the unclipped .45acp ammo going in flush with the rear cylinder face.) This is another reason I try to correct folks when they say early Colt cylinders were originally bored straight through as this is an incorrect statement. If they were simply bored straight through then .45Colt ammo would go all the way into the chambers.

Dale
Attached Images
File Type: jpg Early Colt M1917 butt no. 4253 with .45Colt ammo.jpg (70.0 KB, 24 views)

Last edited by tenntex32; 07-24-2020 at 11:48 AM.
Reply With Quote
The Following 3 Users Like Post:
  #106  
Old 07-25-2020, 05:40 PM
Hondo44 Hondo44 is offline
SWCA Member

1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,815
Liked 20,511 Times in 8,548 Posts
Default

Quote:
Originally Posted by tenntex32 View Post
Kevin,

I have seen a few but not very many. One thing you have to look out for is that many later style Colt cylinders may have had their original chambers reamed/modified to accept .45Colt ammo.....thus the owners think they may be the early style cylinders. An all-original unmolested early (or later) Colt M1917 cylinder will not properly accept .45Colt ammo.

Here's a pic of my all-original early style Colt cylinder that will not fully accept .45Colt ammo. (It's the same revolver/cylinder as in my previous pic showing the unclipped .45acp ammo going in flush with the rear cylinder face.) This is another reason I try to correct folks when they say early Colt cylinders were originally bored straight through as this is an incorrect statement. If they were simply bored straight through then .45Colt ammo would go all the way into the chambers.

Dale
Excellent observation. Perhaps the shoulder machined too deep was actually just a manufacturing error!
__________________
Jim
S&WCA #819
Reply With Quote
  #107  
Old 07-25-2020, 10:08 PM
ddixie884's Avatar
ddixie884 ddixie884 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Dec 2004
Location: Avery,Tx
Posts: 2,563
Likes: 3,812
Liked 1,860 Times in 938 Posts
Default

No, the 1917 Colt I have has a tapered transition to the chamber throats like a .455 cylinder and no headspace ledge. I'm not sure that it is not chambered with a .455 reamer............
__________________
dd884
JMHO-YMMV

Last edited by ddixie884; 07-25-2020 at 10:09 PM.
Reply With Quote
  #108  
Old 07-26-2020, 12:05 AM
tenntex32's Avatar
tenntex32 tenntex32 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Nov 2018
Location: North Central Texas
Posts: 1,283
Likes: 925
Liked 2,173 Times in 836 Posts
Default

I don't feel it was a chambering error on Colt's part with regards to their early style cylinders requiring the use of moonclips.

With regards to the cylinders possibly being reamed for .455.......the .455 Webley case is considerably shorter than the .45acp case so I would feel that the tapered shoulder for .455 Webley ammo would be too shallow to allow a .45acp round to go in as far as they do in my early Colt M1917. Now the .455 Colt Dominion case is closer in length to the .45acp case but unfortunately I do not have any .455 Webley or .455 Colt Dominion ammo to see if their slightly larger diameters will even fit into the early Colt M1917 chambers. (Just do a Google Images search of ".45 acp vs .455 Webley" and you will see what I mean.)

I have read where some folks speculate that Colt may have simply used .45Colt cylinders in their early M1917 revolvers. I feel this to not be the case as one can clearly see that the much longer .45Colt rounds will not chamber properly in my all-original early Colt M1917 example......not by a longshot.

I feel Colt simply knew the .45acp M1917 revolver ammo was going to be issued on moonclips and made sure the chambering method used on their early examples would allow for ample room for the .45acp rounds to chamber under the worst of wartime conditions.

I also feel the U.S. government (and possibly even Colt) may have seen the benefit of S&W's M1917 style cylinder that allowed the use of .45acp ammo both with and without moonclips and steered Colt in that direction. IIRC the government may have even asked S&W politely to allow Colt to do something similar with regards to their cylinders. Since the U.S. government had federalized S&W at some point later on in M1917 production this may have also helped with S&W's "decision" to allow such.

Maybe someone has access to actual U.S. government, Colt, or S&W documents that provide more info as to the decision making process at Colt and possible needed permissions from S&W?

Dale

Last edited by tenntex32; 07-26-2020 at 12:36 AM.
Reply With Quote
  #109  
Old 07-26-2020, 03:42 AM
ddixie884's Avatar
ddixie884 ddixie884 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Dec 2004
Location: Avery,Tx
Posts: 2,563
Likes: 3,812
Liked 1,860 Times in 938 Posts
Default

If you drop a .45acp into a S&W cylinder chambered in .455 it will go in flush with the base of the case. The .455 MKII was much shorter than the .45acp and the MKI is also shorter but the chambers on a .455 are much deeper. If you don't believe me check it out.
__________________
dd884
JMHO-YMMV
Reply With Quote
  #110  
Old 07-26-2020, 04:36 AM
Hondo44 Hondo44 is offline
SWCA Member

1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,815
Liked 20,511 Times in 8,548 Posts
Default

Dale,

Thanks for that. Upon further contemplation, I must agree with you. Although I've seen it written for both Colt, and S&W (for S&W in the Journal Book 2 reference to Kuhn, 1961), I can't believe that either Colt or S&W would use a charge hole for a non-heeled bullet cartridge. After all, they had been chambering their revolvers for modern cartridges with chamber throats for at least 40 years by 1917.

If Colt purposely positioned the chamber shoulder deeper than the .45 ACP required, I wouldn't think it was for the .455 cartridge. I know S&W British Svc revolvers are only marked .455 because they're actually chambered for the longer .455 MKI at British request, so both MK I & II could be fired. An ACP falls all the way in the chamber.

Photo by Lee Jarrett

Did Colt produce any 455 New Svc revolvers for the British? If they did, I can believe they may have shaved the rear cyl face of unused cyls for use in their early 1917s. They certainly had precedent for that by using left over 1878 DA cyls in their single action army. They didn't waste anything.

Certainly didn't need deeper chambers to ream them on purpose in ACP cyls. Neither for the shorter MKII or even the longer case .455 MkI (.455 Colt and Dominion) same case length as the ACP. I have both, they do not chamber all the way and no deeper than the ACP in a S&W 1917 ACP cyl chambers because of the tapered case, as you said. So they wouldn't need a deeper reamed shoulder.

It certainly wouldn't be for the shorter MkII, which headspaces on it's rim at the cyl face. It would not fire or not reliably enough with it's thin rim.

The MKI will fire for certain, because it's tapered and too fat at the bas to chamber completely as you thought.

Or were they left over cyls chambered for the .45 Frankford Arsenal ACP equivalent cartridge with a rim, submitted in the New Svc for the 1906 Army Trials???? That would make more sense for the deeper tapered shoulders since that case was longer than both the ACP and MkI case.


The government didn't have to share S&Ws 45 ACP shoulder position with Colt, it was not patented, nor patent-able under patent law. It was not only too general of a concept but one that was already in the public domain that all manufacturers were already using for at least 40 years.

But the gov't did propose that S&W share their clip patent rights with Colt at no royalty expense which they did. And before the Gov't took over production. Smith's original clip design from the 1870s was for a full moon clip, but that's another story.

Like you, I would really like to know the true story.
__________________
Jim
S&WCA #819
Reply With Quote
The Following 2 Users Like Post:
  #111  
Old 07-26-2020, 05:28 AM
StrawHat's Avatar
StrawHat StrawHat is offline
SWCA Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Jan 2007
Location: Northeast Ohio
Posts: 5,992
Likes: 9,195
Liked 13,464 Times in 3,975 Posts
Default

Quote:
Originally Posted by tenntex32 View Post
...Since the U.S. government had federalized S&W at some point later on in M1917 production this may have also helped with S&W's "decision" to allow such.

Dale...
Dale,

If you are referring to the seizure of the S&W factory by the US Government, that occurred in Sept of 1918 and went until January 1919.

Kevin
__________________
Unshared knowledge is wasted.
Reply With Quote
  #112  
Old 07-28-2020, 06:20 PM
moosedog moosedog is offline
SWCA Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Feb 2003
Location: Michigan
Posts: 7,851
Likes: 11,782
Liked 13,762 Times in 3,346 Posts
Default

Here's my pre 26 that was modified for use with 45 Colt ammo. I purchased it with this modification so I do not know who did the work. It is accurate and reliable. This revolver shoots best with my handloads using jacketed bullets.
I've tried Hornady's in 451 and 452 diameter and can't really tell much difference but I should put it on my Ransom Rest.
Reply With Quote
  #113  
Old 07-28-2020, 07:27 PM
StrawHat's Avatar
StrawHat StrawHat is offline
SWCA Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Jan 2007
Location: Northeast Ohio
Posts: 5,992
Likes: 9,195
Liked 13,464 Times in 3,975 Posts
Default

Quote:
Originally Posted by moosedog View Post
...Here's my pre 26 that was modified for use with 45 Colt ammo...
It looks like the chambers were deepened and the extractor star cut to recess the rims of the cartridge.

Nice work, whoever did it.

Kevin
__________________
Unshared knowledge is wasted.
Reply With Quote
  #114  
Old 07-28-2020, 11:56 PM
jtcarm's Avatar
jtcarm jtcarm is online now
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Apr 2011
Posts: 4,364
Likes: 1,552
Liked 4,271 Times in 1,805 Posts
Default

I have a pre-26 barrel purchased from a forum member. About time I put it on my 25-2.

I dig tapered barrels.
Reply With Quote
  #115  
Old 05-10-2021, 12:46 AM
Jaguarman Jaguarman is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Mar 2016
Location: GA
Posts: 10
Likes: 2
Liked 11 Times in 5 Posts
Default Model 1950 Target

Hey Wheelgun, been awol for a few. Have similar to yours. Made some custom walnut grips and now can’t find original. Looked exactly like yours. Any idea where I can get a replacement set of originals?
Much thanks
Jaguarman
Reply With Quote
  #116  
Old 05-10-2021, 02:44 AM
45Wheelgun's Avatar
45Wheelgun 45Wheelgun is offline
Administrator
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Nov 2003
Location: Columbus, Ohio
Posts: 2,354
Likes: 976
Liked 3,973 Times in 600 Posts
Default

Quote:
Originally Posted by Jaguarman View Post
Hey Wheelgun, been awol for a few. Have similar to yours. Made some custom walnut grips and now can’t find original. Looked exactly like yours. Any idea where I can get a replacement set of originals?
Much thanks
Jaguarman

Those are standard N-Frame Diamond Magna grips. I'd would keep an eye on the classifieds here on the forum as they are not difficult to come across. I'll check my "Wood Pile" and see if I have a set laying around.
__________________
Dave
Reply With Quote
  #117  
Old 05-10-2021, 03:40 PM
Jaguarman Jaguarman is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Mar 2016
Location: GA
Posts: 10
Likes: 2
Liked 11 Times in 5 Posts
Default Model 1950 standard Diamond manga grips

Big thanks fir the info. I’d lose my head if it wasn’t screwed on tight. Pls ck your wood pile and I’ll look at classifieds.
Reply With Quote
  #118  
Old 05-10-2021, 05:48 PM
bill1917 bill1917 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Jan 2013
Location: South Mississippi
Posts: 33
Likes: 1
Liked 19 Times in 11 Posts
Default

Something I don't understand. S&W makes the Governor which shoots 45 ACP, 45 Colt, and 410. Why can't they make an N-frame that will handle 45 ACP and 45 Colt without changing the extractor?
Reply With Quote
  #119  
Old 05-11-2021, 12:16 AM
delcrossv's Avatar
delcrossv delcrossv is offline
SWCA Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: May 2018
Location: Outer Uzbekistan
Posts: 4,656
Likes: 8,566
Liked 11,674 Times in 3,054 Posts
Default

For comparison sake , here's my Mod 1950 in .45 Colt. (Letters)
Note the headspacing- also the cylinder is longer.

__________________
SWCA #3356, SWHF#611

Last edited by delcrossv; 05-11-2021 at 12:19 AM.
Reply With Quote
  #120  
Old 05-11-2021, 02:17 PM
Hondo44 Hondo44 is offline
SWCA Member

1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,815
Liked 20,511 Times in 8,548 Posts
Default

Quote:
Originally Posted by bill1917 View Post
Something I don't understand. S&W makes the Governor which shoots 45 ACP, 45 Colt, and 410. Why can't they make an N-frame that will handle 45 ACP and 45 Colt without changing the extractor?
The Governor doesn't shoot 45 ACP:
Governor | Smith & Wesson

So you won't find a 45 that shoots both except a custom conversion. However it can be done but not from gun manufacturers. You'll only find the conversion from gunsmiths who specialize in the conversion by cutting 45 Colt cyls for 45 ACP moon clips. And using the clips for ACP is required, they cannot be loaded/fired singularly.
__________________
Jim
S&WCA #819

Last edited by Hondo44; 05-11-2021 at 02:18 PM.
Reply With Quote
  #121  
Old 05-11-2021, 05:58 PM
ddixie884's Avatar
ddixie884 ddixie884 is offline
Member
1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson 1950 Model 45 Target - Found in Tucson  
Join Date: Dec 2004
Location: Avery,Tx
Posts: 2,563
Likes: 3,812
Liked 1,860 Times in 938 Posts
Default Not all

Quote:
Originally Posted by Kurusu View Post
Valid for Smith & Wesson. Not for the Colt M 1917.
Most were retro fitted with cylinders with the proper shelf to hold cases without clips for firing. I own 4 1917 Colts and the only one that has the old style cylinder is a parts gun with a .45Colt barrel............

Actually the Governor does fire .45acp in clips. It does not chamber .45 AR..
__________________
dd884
JMHO-YMMV

Last edited by ddixie884; 05-11-2021 at 06:12 PM.
Reply With Quote
Reply

Tags
1911, 44 magnum, 45acp, bowen, colt, ejector, extractor, gunsmith, model 25, recessed, ruger, saa, screwdriver, smith-wessonforum.com, swca, winchester

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FOUND-1950 Target Rosewood grips rbrbrb6 WANTED to Buy 0 01-09-2015 09:26 PM
Finally found a 1950 target, abused ,but neat. Allen-frame S&W Hand Ejectors: 1896 to 1961 15 12-25-2009 02:46 PM
FOUND***Dec, 1950 N Frame Target Revolvers***FOUND 29-1 WANTED to Buy 19 05-09-2009 02:14 PM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 06:33 PM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)