Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Hand Ejectors: 1896 to 1961
o

Notices

S&W Hand Ejectors: 1896 to 1961 All 5-Screw & Vintage 4-Screw SWING-OUT Cylinder REVOLVERS, and the 35 Autos and 32 Autos


Reply
 
Thread Tools Display Modes
  #101  
Old 09-18-2011, 09:25 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

"Any idea what the ballistics are on the old HV stuff to compare?"

I checked Cartridges of the World by Frank Barnes. It showed some Winchester High Velocity loads; however, these show the standard 115 grain bullet. I believe this is a misprint. These loads are: 1575 fps & 633 ft-lbs, and 1640 fps & 690 ft-lbs.

I also found reloading data for the 80 grain bullet that shows the following: 1845 fps & 608 ft-lbs, and 2220 fps and 876 ft-lbs.

The test firearm was a Winchester 1892 with a 24" barrel.



ColbyBruce,

The velocity listed is for a rifle.
__________________
John 3:16
WAR EAGLE!

Last edited by Muley Gil; 09-18-2011 at 09:45 PM.
Reply With Quote
  #102  
Old 09-18-2011, 09:58 PM
ColbyBruce ColbyBruce is offline
Member
 
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,854
Likes: 3,767
Liked 11,624 Times in 3,642 Posts
Default

Thank you for your efforts. I was not sure which neighbor I was going to loan the gun to for test fire purposes, LOL!!
Reply With Quote
  #103  
Old 09-19-2011, 08:57 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

I just checked with a friend of mine about his .32-20. We found it in a store in Opelika, Alabama in late 1977 or early 1978. It is a 5" with an aftermarket chrome finish. It was originally shipped blue.

IIRC, it was bought with imitation pearl grips.

The serial number is 144611 and it shipped in 1939.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
  #104  
Old 09-20-2011, 08:08 AM
Dr.-d Dr.-d is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Mar 2009
Posts: 271
Likes: 21
Liked 15 Times in 14 Posts
Default

Here is my 32 WCF 1902 First Change I just recently lettered. Shipped November 15, 1902 to Powell and Clement in Ohio. Sent back to the factory 10-21.
Attached Images
File Type: jpg 1902 019.jpg (65.3 KB, 207 views)
File Type: jpg 1902 020.jpg (59.1 KB, 177 views)
File Type: jpg 1902 002.jpg (67.7 KB, 172 views)
Reply With Quote
The Following User Likes This Post:
  #105  
Old 10-03-2011, 01:38 AM
pacyew2
Junior Member
 
Posts: n/a
Default 5" acquired

Here's my newly acquired 5" 32-20 in the 134xxx range. A real sweetheart to shoot.
Bullets and mold are Ideal 311316. Brass from Starline currently runs $175 per 1000. After the initial investment, shooting becomes cheap.

Great thread, thanks to all!
Attached Images
File Type: jpg IMG_5058b.jpg (100.9 KB, 176 views)
File Type: jpg IMG_5056b.jpg (91.1 KB, 178 views)
File Type: jpg IMG_5055b.jpg (119.8 KB, 179 views)

Last edited by pacyew2; 10-03-2011 at 01:41 AM. Reason: addition
Reply With Quote
  #106  
Old 10-11-2011, 01:19 AM
N7BLW N7BLW is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: May 2003
Location: Granite Falls, WA
Posts: 78
Likes: 12
Liked 52 Times in 30 Posts
Default

FYI, s/n 76910 shipped 8/9/1917, per info in my database.
Jim
__________________
Jim Sebring
Reply With Quote
  #107  
Old 10-11-2011, 01:30 AM
N7BLW N7BLW is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: May 2003
Location: Granite Falls, WA
Posts: 78
Likes: 12
Liked 52 Times in 30 Posts
Default

The lowest s/n in my database that I've personally inspected is #38. When I saw it in 1992 it was owned by Ray Shoemaker, since deceased. I have #207, a badly reblued 4 inch piece.

Jim
__________________
Jim Sebring
Reply With Quote
  #108  
Old 10-11-2011, 02:12 PM
rburg rburg is offline
Member
The .32-20 Hand Ejector Thread  
Join Date: Jun 2001
Location: Kentucky, USA
Posts: 7,473
Likes: 2,830
Liked 6,261 Times in 2,170 Posts
Default

Quote:
Originally Posted by Dr.-d View Post
Shipped November 15, 1902 to Powell and Clement in Ohio.
Powell and Clemmens was still up and operating back in the 1970s. It was owned by Frank "somebody's" wife. He was a city employee and for some reason couldn't own a gun store. He's still alive an kicking, appearing at all the OGCA shows at his tables on the front wall (the only tables on that wall.) Back when I worked nearby, I used to walk up to window shop at lunch. That was all I could do because the guns he had were always top notch. Engraved Brownings and the like. The guy's last name will come to me..maybe.. He's a past president of OGCA, too.
__________________
Dick Burg
Reply With Quote
  #109  
Old 10-11-2011, 08:19 PM
ColbyBruce ColbyBruce is offline
Member
 
Join Date: Nov 2007
Location: Atlanta, GA
Posts: 7,854
Likes: 3,767
Liked 11,624 Times in 3,642 Posts
Default

Does anyone know if there is a speedloader that works for a K frame .32/20?
Reply With Quote
The Following User Likes This Post:
  #110  
Old 10-11-2011, 08:55 PM
Hondo44 Hondo44 is offline
SWCA Member

The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,814
Liked 20,510 Times in 8,548 Posts
Default

Quote:
Originally Posted by ColbyBruce View Post
Does anyone know if there is a speedloader that works for a K frame .32/20?
Colby,
I think your in luck. When I look at cartridges that speedloaders are commonly made for, the closest size to 32-20 is 9MM which fortunately has a base slightly smaller than 32-20. Therefore it might work as is depending on brand of speedloader or worst case you'd have to trim slightly with a dremel tool.

Good luck and if you try it, let us know if it works.
__________________
Jim
S&WCA #819
Reply With Quote
  #111  
Old 10-13-2011, 05:09 PM
shooter7 shooter7 is offline
Member
The .32-20 Hand Ejector Thread  
Join Date: Jun 2005
Location: Illinois
Posts: 132
Likes: 0
Liked 0 Times in 0 Posts
Default

For those that are interested in the original Winchester H.V. 32-20 ammo velocities, etc., go to this website, that has owner's manuals on it, page7b and look up the Remington model 25 manual. In the manual, there is information regarding the ballistics of some 32-20 ammo of the time. Whether it is accurate or not, I don't know.

Last edited by shooter7; 10-13-2011 at 05:11 PM.
Reply With Quote
  #112  
Old 11-27-2011, 09:36 PM
rburg rburg is offline
Member
The .32-20 Hand Ejector Thread  
Join Date: Jun 2001
Location: Kentucky, USA
Posts: 7,473
Likes: 2,830
Liked 6,261 Times in 2,170 Posts
Default

Bump...BTT

This is a good thread, it needs to be somehow linked so its easier to find when we need it or someone comes along and asks a question already answered 5 ways from Sunday.
__________________
Dick Burg
Reply With Quote
  #113  
Old 11-27-2011, 09:44 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

Quote:
Originally Posted by rburg View Post
"This is a good thread, it needs to be somehow linked so its easier to find when we need it or someone comes along and asks a question already answered 5 ways from Sunday."
Dick,

Can't we put it here:

Notable Thread Index
__________________
John 3:16
WAR EAGLE!

Last edited by handejector; 11-27-2011 at 11:24 PM.
Reply With Quote
  #114  
Old 11-27-2011, 11:30 PM
handejector's Avatar
handejector handejector is offline
Administrator
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Mar 2005
Posts: 27,010
Likes: 7,103
Liked 48,559 Times in 9,216 Posts
Default

Muley,
There is a "Quote" button at bottom right that makes it easy and quick to quote a post and then comment.



Quote:
Originally Posted by Muley Gil View Post
Quote:
Originally Posted by rburg View Post
"This is a good thread, it needs to be somehow linked so its easier to find when we need it or someone comes along and asks a question already answered 5 ways from Sunday."
Dick,

Can't we put it here:

Notable Thread Index
Duhhhhh, guys!
It's been in the Notable Thread Index since it was started in Dec, 2010!
Do y'all need an index to the index?


(I know Dick's old and feeble, but I thought Muley could still see.)
__________________
Regards,
Lee Jarrett
Reply With Quote
  #115  
Old 11-28-2011, 11:24 AM
jcook75 jcook75 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Nov 2011
Location: Dallas, GA
Posts: 1
Likes: 0
Liked 1 Time in 1 Post
Default 32-20

A 32-20 w/6" barrel, round grips was handed down to me by my father yesterday. It was my great grandfathers. The SN is 11112X. No * and everything appears to be true (I will need to check behind the grips) There were no papers passed down so I don't know if my great grandfather was the original owner or not.
Unfortunately it was stored in a sheepskin holster and it did acquire pitting.
I was wondering if anyone could provide any further information on the production timeframe based on SN. I have very little knowledge about these guns except what I have been able to find here and a couple other places.
Thanks in advance for any assistance.

Jason
Reply With Quote
The Following User Likes This Post:
  #116  
Old 11-30-2011, 10:09 PM
shooter7 shooter7 is offline
Member
The .32-20 Hand Ejector Thread  
Join Date: Jun 2005
Location: Illinois
Posts: 132
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally Posted by jcook75 View Post
A 32-20 w/6" barrel, round grips was handed down to me by my father yesterday. It was my great grandfathers. The SN is 11112X. No * and everything appears to be true (I will need to check behind the grips) There were no papers passed down so I don't know if my great grandfather was the original owner or not.
Unfortunately it was stored in a sheepskin holster and it did acquire pitting.
I was wondering if anyone could provide any further information on the production timeframe based on SN. I have very little knowledge about these guns except what I have been able to find here and a couple other places.
Thanks in advance for any assistance.

Jason
Jason,
Based on another 111,000 range gun I have a letter on, this gun could have been shipped out late 1922 or in 1923, but with the 32-20s, you never know how long some sat before being sent out for delivery.
Reply With Quote
  #117  
Old 11-30-2011, 10:49 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

Quote:
Originally Posted by handejector View Post
(I know Dick's old and feeble, but I thought Muley could still see.)
See? See what?????????????????
__________________
John 3:16
WAR EAGLE!

Last edited by handejector; 11-30-2011 at 10:52 PM.
Reply With Quote
  #118  
Old 12-01-2011, 12:36 AM
DrMark's Avatar
DrMark DrMark is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Sep 2006
Location: Virginia
Posts: 101
Likes: 34
Liked 23 Times in 13 Posts
Default




Mine. Re-finished. Serial Number 324XX

Is this a Model of 1905 - 1st Change, circa 1907?

Thanks.
Reply With Quote
The Following User Likes This Post:
  #119  
Old 12-01-2011, 01:52 PM
rburg rburg is offline
Member
The .32-20 Hand Ejector Thread  
Join Date: Jun 2001
Location: Kentucky, USA
Posts: 7,473
Likes: 2,830
Liked 6,261 Times in 2,170 Posts
Default

Quote:
Originally Posted by handejector View Post
Muley,

(I know Dick's old and feeble, but I thought Muley could still see.)
Dern it Lee, if yer gonna describe me, at least get it right. You left out the most important part, GRUMPY.

Sometimes it changes to really grumpy. I'd expect you to know that by now.
__________________
Dick Burg
Reply With Quote
  #120  
Old 12-27-2011, 07:45 PM
TimW TimW is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Dec 2011
Location: Florida
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default New to site. Like and enjoy 32-20's.

Hello. I found this site and enjoyed reading all about the 32-20's and other related questions and answers.
Nice to see all the S&W revolver line living on and appreciated
by young and old alike.
Having owned two other 32-20's in the past prompted me to obtain a 3rd. It is a fine Hand Ejector with blue finish and all matching numbers in the 76000 range. I figure it must be close to a hundred or so, but the quality built into it is marvelous and very much appreciated by me and my son. Hard to believe they had that in the day, but I'm glad they did.
Somebody earlier had mentioned heat treated cylinders.
I don't think this model does. I would be thankful for some info on that as far as what to expect when shooting and reloading ammo for this revolver.
Thanks.
Tim.
Reply With Quote
  #121  
Old 12-27-2011, 09:05 PM
boatbum101 boatbum101 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Oct 2005
Location: Pensacola,FL
Posts: 1,720
Likes: 4,198
Liked 998 Times in 536 Posts
Default

OK I'll play . Was recently able to aquire this beauty . Paid more than I wanted to & really had to think about it . Truth be told it's the best looking 32-20 I'd ever seen . I couldn't resist temptation . Here she is enjoy y'all .
Andy
Attached Images
File Type: jpg 32-20 2.jpg (82.9 KB, 215 views)
File Type: jpg 32-20 4.jpg (31.1 KB, 243 views)
File Type: jpg 32-208.jpg (30.7 KB, 231 views)
File Type: jpg 32-20 box bottom.jpg (56.9 KB, 191 views)
File Type: jpg 32-20 box end.jpg (67.6 KB, 182 views)
Reply With Quote
The Following 6 Users Like Post:
  #122  
Old 12-29-2011, 09:22 PM
aqualung71 aqualung71 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Dec 2011
Location: central Arkansas
Posts: 7
Likes: 3
Liked 3 Times in 1 Post
Default .32-20

here is my grandpa's .32-20, serial # 27182. It's rough with broken hammer and modified barrel, but worth a mint to me in sentimental value.
Attached Images
File Type: jpg S6305384.jpg (43.4 KB, 137 views)
Reply With Quote
The Following 3 Users Like Post:
  #123  
Old 12-29-2011, 10:34 PM
Hondo44 Hondo44 is offline
SWCA Member

The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,814
Liked 20,510 Times in 8,548 Posts
Default

Quote:
Originally Posted by aqualung71 View Post
here is my grandpa's .32-20, serial # 27182. It's rough with broken hammer and modified barrel, but worth a mint to me in sentimental value.
Welcome to the forum. I wouldn't sell it at any price either! It's a family heirloom!

Do you shoot it? I wouldn't hesitate to w/standard ammunition and/or mild handloads. Hammers for those are not that hard to find if you want to make it a little more convenient to shoot single action.
__________________
Jim
S&WCA #819
Reply With Quote
The Following User Likes This Post:
  #124  
Old 12-30-2011, 11:28 AM
aqualung71 aqualung71 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Dec 2011
Location: central Arkansas
Posts: 7
Likes: 3
Liked 3 Times in 1 Post
Default

Quote:
Originally Posted by Hondo44 View Post
Welcome to the forum. I wouldn't sell it at any price either! It's a family heirloom!

Do you shoot it? I wouldn't hesitate to w/standard ammunition and/or mild handloads. Hammers for those are not that hard to find if you want to make it a little more convenient to shoot single action.
I haven't shot it yet, there is an issue with the ejector rod not locking up. Thanks to the advice of the great guys on this forum, i plan on taking some time this weekend to do a good thorough cleaning and see if that cure what ails it. Also been looking around for some ammo. I'll probably just order some black hills so i will have a cool looking box to display with it.
Reply With Quote
  #125  
Old 12-30-2011, 01:52 PM
mi2600 mi2600 is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Dec 2011
Location: N. Muskegon, MI
Posts: 153
Likes: 21
Liked 41 Times in 23 Posts
Default

Four S&Ws and two Colts:

S&W HE1898 5" 14XX Nickle
S&W HE1902 4" 121XX
S&W HE1905 4" 557XX
S&W HE1905 4" 1384XX

Colt Army 4" 4531XX
Colt Police Positive 4" 1647XX

I started buying 32-20s because I already had brass and dies from my '73 Winchester. You have to be very careful reloading because of the very thin necks. Fun to shoot the handguns with 115gr LRN bullets in front of 2.5gr of Bullseye.

Added 12-31-11:
S&W HE1914 4" 755XX

Last edited by mi2600; 12-31-2011 at 04:19 PM.
Reply With Quote
  #126  
Old 01-01-2012, 09:09 PM
Mel1200 Mel1200 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Jan 2012
Posts: 1
Likes: 0
Liked 1 Time in 1 Post
Default Great G-Pa's .32-20

I was looking at the S&W that belonged to my Great Grandfather. Couldn't see a serial number until I removed the home made grips and was shocked to see only 4 digits (55XX)! What do I have, and any guess year of manufacture?
Attached Images
File Type: jpg IMG_3296.jpg (62.1 KB, 143 views)
File Type: jpg IMG_3297.jpg (61.3 KB, 127 views)
Reply With Quote
The Following User Likes This Post:
  #127  
Old 01-01-2012, 09:16 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

Welcome to the Forum.

You have a Model of 1899. Yours was probably shipped in 1902. I presume this number came from the butt of the revolver. The same number should be on the rear of the cylinder and underneath the barrel.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
  #128  
Old 01-04-2012, 12:22 AM
w10085's Avatar
w10085 w10085 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Aug 2010
Location: North Carolina
Posts: 123
Likes: 0
Liked 14 Times in 9 Posts
Default Revolvers plus ammo!

The two revolvers aren't much to talk about. The round butt is sn 44,530 and the square butt is sn 134,742. Two shooters but they are sitting on 400 rounds of fresh reloads. I'm looking forward to making them into 400 empty cases!
Attached Images
File Type: jpg My 32-20.jpg (155.9 KB, 158 views)
Reply With Quote
The Following 2 Users Like Post:
  #129  
Old 01-04-2012, 10:04 AM
walnutred walnutred is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Jan 2007
Location: Ohio
Posts: 4,450
Likes: 785
Liked 3,030 Times in 1,002 Posts
Default

So what do you think the attraction of 32 WCF revolvers were “back in the day”? I’ve heard the old saw about having a rifle/pistol combination in the same caliber but I’m not sure that holds up if you look at the numbers. I know of only two “cowboy” rigs that stayed together which is admittedly a small sampling. One consisted of a 32-20 rifle for range varmint control and a 44 revolver for personal defense. The other was a 56 Spencer/44 revolver combo. If you discount military sales 32 WCF was the second most popular caliber in the SAA. After the turn of the 20th Century both Colt and S&W offered 32 WCF handguns in DA revolvers, though Smith at least seemed to have a hard time selling them.

I wonder if the 32 revolvers were more common in the east. While I have always liked the 32-20 and usually have had a couple around for me the attraction has simply been that they are fun to shoot. If I was purchasing a handgun for self-defense, even in the early 20th century, it would be hard to make a case for the 32-20. Which may be why S&W had such a hard time selling them.
Reply With Quote
The Following User Likes This Post:
  #130  
Old 01-04-2012, 12:35 PM
bmcgilvray's Avatar
bmcgilvray bmcgilvray is offline
SWCA Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Jan 2006
Location: Texas
Posts: 3,353
Likes: 10,447
Liked 6,092 Times in 1,249 Posts
Default

I've heard the .32-20 chambered revolvers, both Colt and Smith & Wesson were somewhat popular with lawmen in the mid-South and Appalachia. Pretty Boy Floyd was supposedly taken down by a .32-20 though this was fired from a rifle.


It's only anecdotal but seems that some thought the .32-20 was a hot number in a revolver compared with the .38 Special. Don't know if this is really true. If it was, perhaps .32-20 owners were resorting to using the .32-20 "rifle only" loading in their revolvers as an effort to gain effectiveness.

Would love to see more about the use of .32-20 revolvers back in the day.
Reply With Quote
  #131  
Old 01-04-2012, 01:03 PM
Hondo44 Hondo44 is offline
SWCA Member

The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,814
Liked 20,510 Times in 8,548 Posts
Default

Skeeter Skelton was a fan of the 32-20 as the flattest shooting cartridge in the old days and also of the 38-40.
__________________
Jim
S&WCA #819
Reply With Quote
  #132  
Old 01-04-2012, 08:03 PM
w10085's Avatar
w10085 w10085 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Aug 2010
Location: North Carolina
Posts: 123
Likes: 0
Liked 14 Times in 9 Posts
Default

I thought that around the turn of the century, many police departments were armed with .32 S&W Long revolvers. If you compare the .32-20 to .32 Regulation Police then it was a hot cartridge.
Reply With Quote
  #133  
Old 01-04-2012, 08:35 PM
walnutred walnutred is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Jan 2007
Location: Ohio
Posts: 4,450
Likes: 785
Liked 3,030 Times in 1,002 Posts
Default

Quote:
Originally Posted by Hondo44 View Post
Skeeter Skelton was a fan of the 32-20 as the flattest shooting cartridge in the old days and also of the 38-40.
Yes, I became interested in the 32-20 from reading a few of the gun writers like Skelton speak so fondly of it. From what I recall though most talked of it as being a small game ctg, not a self defense ctg.

W10085, that is an interesting point. Compared to 32 Long and even 38 S&W it seems hot. However but just about every revolver that was available in 32 WCF was available in 38 Special, at least in the US.

Though in the late 19th Century countries like Russia and France actually adopted ctgs similar to the 32 WCF as military ctgs.
Reply With Quote
  #134  
Old 01-04-2012, 10:15 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

Don't forget that Elmer Keith was also fond of the .32-20 revolver.

In Skeeter's writings, he stated that the .32-20 was always considered a Westerner's cartridge. It probably accounted for a fair number of deer and jack rabbits.

In my experience, the .32-20 shoots a lot flatter than a .38 special.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
  #135  
Old 01-07-2012, 07:52 PM
FastRedPonyCar's Avatar
FastRedPonyCar FastRedPonyCar is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Jan 2012
Location: Montgomery, AL
Posts: 1
Likes: 0
Liked 2 Times in 1 Post
Default

Hey guys. A friend of mine pointed me to this thread. I inherited my grandfather's old .32-20 and I was hoping you guys could give a ballpark estimate of when it was made.

also, whether or not the gun can (or should) be cleaned up and polished back to it's original luster? One side is clean with typical scratching but the other side is corroded and the inside (cotton or wool) lining of the bag it's been stored in for who knows how long is green from the corrosion.

Thanks for any info





Reply With Quote
The Following 2 Users Like Post:
  #136  
Old 01-08-2012, 01:26 AM
Hondo44 Hondo44 is offline
SWCA Member

The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,814
Liked 20,510 Times in 8,548 Posts
Default

It'll look a lot better by polishing with Flitz or Mother's polish (for auto mag wheels). It'll do a great job on the corrosion and all the small scratches.
__________________
Jim
S&WCA #819
Reply With Quote
  #137  
Old 01-08-2012, 01:49 AM
N7BLW N7BLW is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: May 2003
Location: Granite Falls, WA
Posts: 78
Likes: 12
Liked 52 Times in 30 Posts
Default

It probably shipped around 1909 or 1910. The nearest serial numbers with confirmed ship dates I have in my database are:
43039: 10/14/1909, 45051: 4/7/1910.
__________________
Jim Sebring
Reply With Quote
  #138  
Old 01-08-2012, 01:51 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

While not a S&W, there is a thread on the Colt forum concerning Mike Malone, the IRS agent that took down Al Capone. Agent Malone carried a Police Positive Special chambered in .32-20:

The gun of the man who brought down al capone

Mods, please remove if I have violated a rule.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
  #139  
Old 01-09-2012, 03:01 PM
Delerius Delerius is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Nov 2010
Posts: 2
Likes: 0
Liked 0 Times in 0 Posts
Default

Recently received this SW and was wondering if I would be correct in believing that it's 1905 4th change based on the serial? Also what would the value of this gun be in it's current condition?


---

---

---

---

---
Reply With Quote
  #140  
Old 01-23-2012, 09:00 PM
trauma1 trauma1 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Dec 2011
Location: central florida
Posts: 337
Likes: 3
Liked 84 Times in 42 Posts
Default first one

just put my first 32-20 on layaway today. A 85% handejector with a 5 digit serial number. probably paid too much for it, but less than the 5" 38spl hand ejector($700).They do not come up for sale often around here so I jumped on this one. It is tight all the way around with a little bit of pitting here and there but nothing major. Has the factory grips numbered to the gun. All in all a perfect shooter and fell into my self imposed $500/gun limit for the year. I will post some pics when it is out.
Reply With Quote
  #141  
Old 01-23-2012, 11:32 PM
Muley Gil Muley Gil is offline
US Veteran
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,471
Likes: 88,955
Liked 24,775 Times in 8,480 Posts
Default

Delerius,

Welcome to the Forum.

Not sure how I missed your post, as I'm a HUGE .32-20 (and I like the caliber too. )

Yes, it is a 1905 4th change. Unfortunately, the condition isn't the best. The finish is pretty worn and the head of the ejector rod is really bugged by somebody with a pair of pliers.

Depending on your location, I'd put the value around $225.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
  #142  
Old 03-31-2012, 04:45 PM
blitzedrx7 blitzedrx7 is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Mar 2012
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
Default

Hey there guys... New here, first post. Friend pointed me over here when I was passed down some old S&W revolvers..

One happens to fit this thread...

Barrel is stamped "32 WINCHESTER CTG" and serial number is 75XX. Any ideas on about when it was out and about. It's in great shape.

Here's what ended up being passed down to me...


Last edited by blitzedrx7; 03-31-2012 at 04:54 PM.
Reply With Quote
  #143  
Old 03-31-2012, 05:11 PM
Hondo44 Hondo44 is offline
SWCA Member

The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,814
Liked 20,510 Times in 8,548 Posts
Default

Hi and welcome to the forum! You sure came to the right place.

The 1st thing you should do is start a new thread. You have five prizes and you will not get the reading exposure limiting it to only those reading about 32-20s. You have an I frame, at least two K frames and two N frames I think. Post the serial # from the butt of each gun and the caliber of each from left to right and you'll get more info than you ever dreamed.

Go back to the list of threads for this category and click on the "New Thread" button at the top of the list.
__________________
Jim
S&WCA #819
Reply With Quote
  #144  
Old 04-02-2012, 12:54 PM
Kinman's Avatar
Kinman Kinman is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Jul 2010
Location: Spokantucky
Posts: 4,098
Likes: 10,349
Liked 6,901 Times in 2,335 Posts
Default





I am glad to see the number of beautiful pistols in this caliber, I hadn't seen alot of posting regarding 32-20. I just bought my first one on GB and am anxiously waiting its delivery, I really got interested in 32-20 when I bought an old 1895 Winchester from a friend and found what an interesting little cartridge it is. I've reloaded a fair number of different bullets and found that the main problem with crumpling the cases, at least from my experience was due to catching the lip of the cartridge with the edge of the deprimer stem. The cartridge needs to be firmly positioned in the case holder, like many small base cartridges and fed into the de-primer/resizer die. I also beveled the edge of the de-primer stem so that it would be a smoother transition rather than a blunt surface for the cartridge edge to catch on, haven't had a problem since and have resized at least 200 rnds.
I have a question among those that would go to the effort of re-plating a nickel pistol, who would you use. I called S&W and they informed me that they wouldn't work on a pistol that old, I've looked at a few on-line and some charged prices that I felt were ridiculus considering the probable devaluation of having the process done to an original pistol. Is it better to keep the original finish that is marginal, or have it professionally re-nickeled in terms of collector value. Or is it something one has done to satisfy their personal desire to have it looking as good as possible with no intention of letting it go having learned from previous mistakes. Thanks for all your pictures...
Reply With Quote
  #145  
Old 04-02-2012, 02:31 PM
Senor Chisme Senor Chisme is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Apr 2005
Location: Flower Mound, Texas
Posts: 75
Likes: 1
Liked 155 Times in 34 Posts
Default

I just picked this up this weekend at the Tulsa gun show. I know it's a Hand Ejector of some sort, just don't know which model. Bore is nice and shiney with strong rifling. The finish is commensurate with a well used firearm of this vintage. The only major wart is chip out of the bottom of the left grip panel. I'll get a chance to shoot it this Friday but in the meantime, can anyone tell me what I have? Thank you.
Attached Images
File Type: jpg 003.jpg (105.5 KB, 126 views)
File Type: jpg 004.jpg (103.9 KB, 110 views)
File Type: jpg 008.jpg (82.2 KB, 112 views)
File Type: jpg 011.jpg (109.2 KB, 114 views)
File Type: jpg 009.JPG (147.1 KB, 150 views)

Last edited by Senor Chisme; 04-02-2012 at 03:18 PM.
Reply With Quote
The Following User Likes This Post:
  #146  
Old 04-02-2012, 04:57 PM
Russell Cottle's Avatar
Russell Cottle Russell Cottle is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Apr 2012
Location: Pawnee, Oklahoma
Posts: 286
Likes: 16,836
Liked 621 Times in 139 Posts
Default

Here's mine, serial no.43321

Reply With Quote
The Following 2 Users Like Post:
  #147  
Old 04-02-2012, 05:32 PM
Kinman's Avatar
Kinman Kinman is offline
Member
The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Jul 2010
Location: Spokantucky
Posts: 4,098
Likes: 10,349
Liked 6,901 Times in 2,335 Posts
Default

32 WCF, is 32 Winchester Center Fire or 32-20. Be careful about the ammunition you fire through these old timers original factory stuff cleared the barrel with only 20 grains of black powder. Winchester Western and Remington still manufacture ammo, best prices are from "Cheaper than Dirt". That stuff is moving around 1200fps and is a 100grn lead bullet, that should be considered the maximum and only in a pistol with a clean bore. I haven't reloaded for my newly aquired 4th model but plan on using 115grn SWC and starting out around 1000fps, there are also jacketed hollow points available from Hornady in 85 and 100grn. An 85grn JHP at 1000fps would also be a good start at least from my perspective.
Reply With Quote
  #148  
Old 04-29-2012, 08:45 PM
SG-688 SG-688 is offline
Member
 
Join Date: Sep 2007
Location: Illinois
Posts: 1,085
Likes: 407
Liked 2,219 Times in 618 Posts
Default Serial X1

This lump-of-rust 1899 has been my grip fitting mule for 40 years. I took it to the usual Friday night meeting to show my newly acquired pair of mid 1970's Hogue grips, but H. Richard was more interested in my mule.

To the naked eye, the serial number appears to be 01, but, as nice as that would be, I think it is probably 91.

Please excuse the saw dust.











P.S. The lockwork is OK. It's the bore and chambers that are all rust.

Last edited by SG-688; 04-30-2012 at 07:45 PM.
Reply With Quote
  #149  
Old 04-30-2012, 01:54 AM
Hondo44 Hondo44 is offline
SWCA Member

The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread The .32-20 Hand Ejector Thread  
Join Date: Oct 2007
Location: California
Posts: 19,208
Likes: 11,814
Liked 20,510 Times in 8,548 Posts
Default

You have a 32-20 Hand Ejector 1st Model built on the K frame in 1899 (1st year of production) according to the 91 serial number. The star after the # on the butt shows that it was sent back to the factory for rework of some kind, probably for refinish. The date stamped on the grip frame shows this was done Sept. 1912.
__________________
Jim
S&WCA #819
Reply With Quote
  #150  
Old 04-30-2012, 08:18 AM
C&R Bill C&R Bill is offline
Member
 
Join Date: Nov 2003
Location: Tennessee
Posts: 172
Likes: 248
Liked 36 Times in 23 Posts
Default

What a great thread!!!! Some absolutely lovely guns!!
Reply With Quote
Reply

Tags
2nd model, aimtech, belgian, bowen, cartridge, colt, ejector, engraved, extractor, hand ejector, hornady, k-frame, k38, lock, ogca, prewar, remington, roper, round butt, scope, smith-wessonforum.com, speedloader, starline, winchester, wondersight

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
((FOUND, PLEASE CLOSE))Right hand thread ejector rod ben_g1 WANTED to Buy 2 11-09-2016 05:00 PM
Another 32-20 Hand Ejector thread. bassetman1974 S&W Hand Ejectors: 1896 to 1961 8 07-07-2015 08:21 PM
WTB - Old style right-hand thread ejector rods. calmex WANTED to Buy 9 06-26-2014 09:46 AM
N-frame 1950 right hand thread ejector rod(s) tennexplorer WANTED to Buy 2 05-28-2010 11:45 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 07:36 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)