|
|
07-12-2011, 12:47 AM
|
Member
|
|
|
Join Date: Jul 2011
Location: Washington
Posts: 8
Likes: 0
Liked 1 Time in 1 Post
|
|
Grandfather gave me a revolver, and I need a holster
Hello folks. Clearly a first-time poster with a specific need, but I plan to read up more, too.
However, might as well get my question out there.
My grandfather gave me what he said was his old revolver. Original box, grips, the rest.
From what I can tell, it's a S&W Military & Police .38 Special, 6" barrel, SN C103108. As far as I can tell, it's from the 1940s.
The bluing is messed up, so it's a shooter, and he said to use it as such.
With that in mind, I'd like to find a belt holster for it. I know I could get a nylon Uncle Mike's down the road without a sweat, but I feel a little sentimental about it, and would like a leather holster.
I'm not sure how to go about finding one for a gun this old. It seems like .38s with 6" barrels aren't in hot demand!
Where do you guys go to holster such old weapons? A website, a company, a brand, what have you. I'll take whatever's thrown at me.
Much appreciated, folks! Thanks!
|
07-12-2011, 12:57 AM
|
SWCA Member
|
|
|
Join Date: Dec 2005
Location: Portland, OR
Posts: 5,523
Likes: 940
Liked 6,464 Times in 1,327 Posts
|
|
Get hold of Lefty at this company:
BELL CHARTER OAK CUSTOM HOLSTERS (607) 783-2483
He is a member here, and has exactly what you want.
Mike Priwer
|
07-12-2011, 01:43 AM
|
Member
|
|
|
Join Date: Jul 2011
Location: Washington
Posts: 8
Likes: 0
Liked 1 Time in 1 Post
|
|
Oh wow! Will do!
Looks like that Jaguar holster works pretty well. I don't see any others, but finding one is much better than zero.
|
07-12-2011, 07:13 AM
|
|
Member
|
|
|
Join Date: Jul 2010
Posts: 2,367
Likes: 4,047
Liked 2,540 Times in 735 Posts
|
|
I like the
smith & wesson 21-36. You should be able to find one on ebay for 20 bucks or less. If you google "smith and wesson 21-36 holster" you will probably find a few for sale somewhere out there in cyberspace.
I was told it was an old baughman brother design that smith and wesson produced for several years when they were into holster making. I find the design ideal. I crawl around in brush quite a bit and I particularly like that the safety strap holds the hammer down.
|
07-12-2011, 07:52 AM
|
Member
|
|
|
Join Date: Nov 2005
Location: Upstate SC
Posts: 3,450
Likes: 37
Liked 5,433 Times in 1,762 Posts
|
|
Any holster made for a 6" K-frame S&W revolver should work for you.
__________________
Pisgah
|
The Following User Likes This Post:
|
|
07-12-2011, 09:57 AM
|
US Veteran SWCA Member Absent Comrade
|
|
|
Join Date: Nov 2009
Location: upstate SC / Mtns SW Va
Posts: 4,789
Likes: 3,064
Liked 9,875 Times in 1,986 Posts
|
|
You might try any pawnshop or gunshop that deals in used guns. Most of the time, they have a barrel of old used holsters for cheap, and sometimes you can find a pretty nice one that would match the vintage of your M&P.
Charlie
|
The Following 2 Users Like Post:
|
|
07-12-2011, 10:27 AM
|
Member
|
|
|
Join Date: Jan 2003
Location: Garden Spot, Upstate NY, USA
Posts: 1,397
Likes: 3,385
Liked 749 Times in 445 Posts
|
|
Holster
Welcome to this great site. You will have fun here and learn a lot.
I would second the excellent mikepriwer suggestion to order an heirloom holster for an heirloom gun. Yes, used holsters are out there and good to have, They range from knock-about quite superb.
But this seems a different case, if I understand the original post.
Good luck in whatever you decide.
Regards,
Dyson
|
07-12-2011, 11:28 AM
|
Member
|
|
|
Join Date: Dec 2010
Posts: 323
Likes: 20
Liked 54 Times in 19 Posts
|
|
Gunshows--if any in your area--are a good source for used leather holsters at (usually) reasonable prices.
|
07-12-2011, 12:21 PM
|
|
US Veteran
|
|
|
Join Date: Dec 2008
Location: New England
Posts: 4,189
Likes: 3,543
Liked 3,996 Times in 1,627 Posts
|
|
Quote:
Originally Posted by mikepriwer
|
DITTO ! ! You will NOT be disappointed.......
__________________
'Nam 1968-69.DAV,VFW,NRA Inst.
|
07-12-2011, 01:39 PM
|
Member
|
|
|
Join Date: Jul 2011
Location: Washington
Posts: 8
Likes: 0
Liked 1 Time in 1 Post
|
|
Whew! The floodgates opened. Thank you for all the suggestions!
The case with this revolver is a little confusing, to be frank. The weapon is an heirloom, one my grandfather did not care much for (he preferred the same weapon in .32-20), so I think that's why he gave it to me, as he knew I enjoy firearms.
However, I'm not sure where it fits in my "arsenal." I'm building a Glock battery right now (26 first, then a 19) and I didn't expect to suddenly have a revolver in my hands. That's why I asked about holsters; I don't know how far down the bank account I want to get into this surprise.
Then again, I've already picked up some speedloaders for it and have my eye on pouches for them. Go figure.
Thank you again for all your help; it's much appreciated!
Last edited by doshiijun; 08-11-2011 at 02:28 AM.
|
07-12-2011, 03:24 PM
|
Member
|
|
|
Join Date: Apr 2009
Location: NC
Posts: 1,974
Likes: 395
Liked 828 Times in 274 Posts
|
|
Welcome to the forum. You're on the right track, you don't want to put that fine old revolver in a nylon holster, it deserves some leather. As someone else mentioned, check eBay, there are usually a few leather K frame holsters there that can be had for a reasonable price. Also, check the classifieds here and you might find something that would work.
|
07-12-2011, 07:34 PM
|
|
Member
|
|
|
Join Date: Jul 2010
Posts: 2,367
Likes: 4,047
Liked 2,540 Times in 735 Posts
|
|
last suggestion-
Post a WTB add on the classified here. You might get something cool.
|
07-12-2011, 08:56 PM
|
|
US Veteran
|
|
|
Join Date: Aug 2010
Location: SE Michigan
Posts: 540
Likes: 497
Liked 203 Times in 115 Posts
|
|
Based on the SN it was made 48-51
Paul
|
07-13-2011, 08:29 AM
|
|
US Veteran
|
|
|
Join Date: Feb 2003
Location: Homerville, Ohio
Posts: 5,407
Likes: 28,681
Liked 9,261 Times in 2,382 Posts
|
|
Quote:
Originally Posted by doshiijun
Whew! The floodgates opened. Thank you for all the suggestions!
The case with this revolver is a little confusing, to be frank. The weapon is an heirloom, one my grandfather did not care much for (he preferred the same weapon in .32-30), so I think that's why he gave it to me, as he knew I enjoy firearms.
However, I'm not sure where it fits in my "arsenal." I'm building a Glock battery right now (26 first, then a 19) and I didn't expect to suddenly have a revolver in my hands. That's why I asked about holsters; I don't know how far down the bank account I want to get into this surprise.
Then again, I've already picked up some speedloaders for it and have my eye on pouches for them. Go figure.
Thank you again for all your help; it's much appreciated!
|
We like to see pictures. Also, don't put that Smith near the Glocks, so their "ugliness" cannot rub off onto the Smith.
|
The Following User Likes This Post:
|
|
07-13-2011, 10:59 AM
|
SWCA Member
|
|
|
Join Date: Oct 2003
Location: Massachusetts, USA
Posts: 794
Likes: 0
Liked 968 Times in 219 Posts
|
|
Howdy
I have been using Hunter brand holsters since I was a kid. They make a nice, serviceable holster. I prefer the 1100 series. They make one to fit just about every gun ever made. There is a chart on their web page showing what models fit which guns. Lots of gun shops stock the Hunter brand. And you can usually find plenty of these holsters in the used holster barrel too. I actually prefer to find the old ones. All the smelly oil has dried out and they are no longer oily to the touch. They usually only cost around $10 when you find them used. I like the 1100 series because the snap strap keeps the gun secure. A vintage gun looks fine in them.
Hunter Holsters - The Hunter Company
I just did a quick search over at Midway USA and they have one for a six inch Model 10, which will fit your M&P.
Hunter 1100 Snap-Off Belt Holster Right Hand 6" Barrel S&W 10 Leather Brown - MidwayUSA
|
07-13-2011, 12:52 PM
|
Member
|
|
|
Join Date: Jul 2011
Location: Washington
Posts: 8
Likes: 0
Liked 1 Time in 1 Post
|
|
Wow, you guys really are generous. I never got this much help on other gun forums! Then again, there are quite a lot of you. Heh.
Pictures were called for, and I must deliver. Warning: They're a little big.
You can see now what he meant by it being a shooter. He left the gun in its original box, but I think something must have leaked inside of said box. I keep it in my bedside safe.
Flawless on this side, though.
Unfortunately there aren't many gun stores in this area, and I went through their bargain bins. Hunter's a nice option, but my eye keeps swinging toward that old 21-36 as a stopgap, until I can build the cash for something like, say, one from Lefty or that Eagle character. Heh.
Also, thank you kindly Paul, for letting me know about the manufacture timeframe! He said he bought it in the 40s, so 1948 and 1949 makes sense. He was back from the war by then.
|
The Following User Likes This Post:
|
|
07-13-2011, 10:16 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,537
Likes: 89,829
Liked 24,917 Times in 8,531 Posts
|
|
Kinda looks like it got blood on it.
__________________
John 3:16
WAR EAGLE!
|
The Following User Likes This Post:
|
|
07-14-2011, 02:19 AM
|
Member
|
|
|
Join Date: Jul 2011
Location: Washington
Posts: 8
Likes: 0
Liked 1 Time in 1 Post
|
|
I can't put that past my grandpa.
|
07-14-2011, 12:11 PM
|
|
Member
|
|
|
Join Date: Mar 2010
Location: Seaside, Oregon
Posts: 6,338
Likes: 25,048
Liked 12,592 Times in 3,794 Posts
|
|
Take it out and shoot it along side your Glocks. You'll find it has a comforting feel in comparison. Sure the G holds more ammo, but there's a reason the 6 shot, .38 Special K frame was in use for as many years as it was. It did the job then, and still will.
I'm not saying you should CC it instead of one of your Glocks, I'm just saying take it out and shoot it, and enjoy it as a family heirloom and a piece of gun history. And know that if you ever had to use it for serious business, you'd be far from unarmed.
|
07-14-2011, 04:55 PM
|
Member
|
|
|
Join Date: Jul 2011
Location: Washington
Posts: 8
Likes: 0
Liked 1 Time in 1 Post
|
|
Quote:
Originally Posted by RobertJ.
And know that if you ever had to use it for serious business, you'd be far from unarmed.
|
Of this, I'm sure.
I'm actually glad to have it as my home defense weapon. It protected my grandfather for decades. It can protect my family just as well.
|
07-14-2011, 05:58 PM
|
Member
|
|
|
Join Date: Jul 2010
Posts: 89
Likes: 0
Liked 0 Times in 0 Posts
|
|
I have had true custom holsters made from both of these Gent's and the holsters are excellent for 50-80 bucks.
Home
Home Page
|
02-23-2019, 03:11 PM
|
Member
|
|
|
Join Date: Jan 2015
Location: Southeast USA
Posts: 116
Likes: 94
Liked 94 Times in 45 Posts
|
|
Another source for old leather would be police supply places. Sometimes when upgunning holsters went with thee gun in trade. Usually at least a bit tired but check the stitching & general condition. Usually a pretty economical deal.
|
02-23-2019, 03:24 PM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,628
Likes: 241
Liked 29,134 Times in 14,087 Posts
|
|
Another ancient posting arisen from its grave.
|
The Following User Likes This Post:
|
|
02-23-2019, 03:34 PM
|
|
Member
|
|
|
Join Date: Apr 2008
Location: Kalamazoo MI
Posts: 3,261
Likes: 5,025
Liked 15,160 Times in 2,491 Posts
|
|
I have a thing about pairing a nice vintage Smith with a holster of similar vintage.
This is an M17 riding in a Lawrence 25LB holster. It’s just makes sense.
__________________
Pass it on.
Mark
|
The Following 2 Users Like Post:
|
|
02-24-2019, 05:54 PM
|
Member
|
|
|
Join Date: Aug 2014
Location: West Texas
Posts: 2,447
Likes: 5,289
Liked 3,903 Times in 1,519 Posts
|
|
Another place you might take a look for a holster is The Simply Rugged Holster company makes their Sourdough model for medium to large revolvers, and they can easily accomodate your six inch barrel. These are well made, very comfortable OWB holsters of the type you need to carry this revolver. My dealings with this holster maker have been very satisfatory. You can get a plain one or a fancy one, depending on your tastes, but this holster will carry your revolver easily and give it good protection. It has the benefit of allowing the revolver to be carried strong side or crossdraw. They have other offerings as well, which you can see on their website. My wait time for any holster I have ordered from them has been less than four weeks, and their prices are very good for the quality of holster you get from them.
__________________
So long ... Ken
|
|
Posting Rules
|
|
|
|
|