|
|
|
03-27-2016, 01:49 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by Missouri Raider
Sorry for not giving that info, caliber is 38 S&W CTG, barrel length is 5 inches
|
As DWalt said, that makes it the British version. If you read through the many pages of this thread or use the search function to look for "British Service Revolver", you'll find quite a bit. Many of these have different markings and also were modified after the war. You should check whether a .38 Special round will go all the way into a chamber; a lot were converted. If you post some pictures, that might yield some additional info.
|
03-27-2016, 02:19 PM
|
Member
|
|
|
Join Date: Mar 2016
Posts: 6
Likes: 4
Liked 0 Times in 0 Posts
|
|
Model 10 victory
Quote:
Originally Posted by Absalom
Yours is a very early V-prefix gun from late spring/early summer 1942. If it has or had a US property stamp on the left side of the topstrap, it likely went to the Navy. If not, it still could have gone to the Navy or to a civilian user like a defense contractor through the Defense Supply Corporation contract. You could find out with a factory letter, but:
If it is blued, it has been refinished, eliminating its collector value. This would fit with the plugged lanyard hole. You do not mention the type of stocks. A refinish could also have removed any top strap marking.
As for value, a refinished gun would largely be seen only as a shooter, so depending on condition somewhere between 250 and 300 at most.
|
Thank you for the info. I can find no markings on the left side top strap. Where can I find a link for owners manuals or video of disassembly/assembly specific to this model with 4 screws on right side? Serach has produced videos only for later models.
|
04-01-2016, 06:40 PM
|
Member
|
|
|
Join Date: Sep 2012
Posts: 117
Likes: 1
Liked 99 Times in 24 Posts
|
|
Here's the info on #V112267, an Aussie which I just happen to be offering for sale. I've edited out the sales stuff, but it's right there in the classifieds if you're interested.
This is one of the 8000 Victory models supplied to the Australian armed forces under the Lend-Lease program. This example retains the original .38 S&W chambering; a .38 Special case will not fit. It appears not to have been fired since it's 1955 FTR (FTR= Factory Thorough Reconditioning) at the Lithgow arsenal.
Serial # V112267 along with W.B./Ordnance bomb stamped on butt denotes manufacture during the 1st half of 1942. S/N's match on frame, barrel, and cylinder, but not grip panels.
"United States Property" stamped on topstrap, D^D along with
FTR/MA 55 and Lithgow inspectors mark on right forward portion of frame around the "Made in U.S.A." legend. Notable is the fact that the added Aussie nomenclature shows bright metal inside the stamps, indicating that this stamping was done after final finish was applied. Trigger, hammer, and lanyard ring show original case colors.
It has always been assumed that these revolvers were rephosphated during FTR, but due to the above I'm not so sure on this example. The color and texture is virtually identical to USN #V16,xxx in my collection.
Very small import mark (Vega Sac Ca) on LH frame under cylinder; bright shiny bore and chambers.
Overall, a very attractive Commonwealth Lend-Lease Victory. The only deficits in the finish are a small scuff on each side of the barrel. Compared with the British examples, which are covered with various postwar proofs and often display signs of the MOD's
"dump 'em in a crate" shipping methods, it's pretty pristine.
|
The Following 4 Users Like Post:
|
|
04-02-2016, 04:25 AM
|
|
SWCA Member
|
|
|
Join Date: Dec 2003
Location: Mississippi
Posts: 2,062
Likes: 1,112
Liked 1,865 Times in 440 Posts
|
|
Last edited by LOBO; 04-02-2016 at 02:42 PM.
|
The Following 10 Users Like Post:
|
|
04-02-2016, 12:09 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by LOBO
V662384 4" .38 special
......
|
Congratulations, nice acquisition. I actually referenced this gun's letter in a post here a few months ago when it first popped up because I'd never seen a S&W OSS letter before. Good to see that the gun ended up with a forum member who can appreciate the significance.
|
The Following 5 Users Like Post:
|
|
04-02-2016, 02:41 PM
|
|
SWCA Member
|
|
|
Join Date: Dec 2003
Location: Mississippi
Posts: 2,062
Likes: 1,112
Liked 1,865 Times in 440 Posts
|
|
Quote:
Originally Posted by Absalom
Congratulations, nice acquisition. I actually referenced this gun's letter in a post here a few months ago when it first popped up because I'd never seen a S&W OSS letter before. Good to see that the gun ended up with a forum member who can appreciate the significance.
|
Thanks. It is a neat revolver. I was surprised to see that even the grips are original to the gun. It also has the nicest action/trigger pull of any Victory model that I have ever tried.
|
The Following User Likes This Post:
|
|
04-02-2016, 03:00 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
In case you'd like a more precise address where the gun shipped, here is a letter for an OSS Colt that shipped in the same timeframe as your Victory (not my gun). It is the same destination. Colt apparently kept more detailed records.
|
The Following User Likes This Post:
|
|
04-02-2016, 07:29 PM
|
|
SWCA Member
|
|
|
Join Date: Dec 2003
Location: Mississippi
Posts: 2,062
Likes: 1,112
Liked 1,865 Times in 440 Posts
|
|
I appreciate that! Thanks!
|
04-05-2016, 12:20 PM
|
Member
|
|
|
Join Date: Mar 2016
Location: Marietta, GA
Posts: 79
Likes: 497
Liked 29 Times in 24 Posts
|
|
Adding another Victory serial number to this data base...recent purchase.
V456678 (cool number) 4" .38 special
NO Gov markings
Sadly, was nickel plated and lanyard loop hole filled years ago..both of which I would like to remedy.
Great shooter...perfect timing.
Having trouble identifying the Proof stamping next to the "V".
Last edited by BillsCamino; 04-05-2016 at 12:21 PM.
|
The Following User Likes This Post:
|
|
04-05-2016, 01:21 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by BillsCamino
......
Having trouble identifying the Proof stamping next to the "V".
|
That appears to be the standard flaming bomb ordnance mark applied to the Victory models, including the civilian-shipped and not US-marked guns. It's in the correct spot, too.
The gun is from late 1943.
Last edited by Absalom; 04-05-2016 at 01:24 PM.
|
04-05-2016, 04:51 PM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,592
Likes: 239
Liked 29,100 Times in 14,071 Posts
|
|
"Sadly, was nickel plated and lanyard loop hole filled years ago..both of which I would like to remedy. Great shooter...perfect timing."
That could be considered as throwing good money after bad.
|
The Following User Likes This Post:
|
|
04-05-2016, 05:28 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by DWalt
"Sadly, was nickel plated and lanyard loop hole filled years ago..both of which I would like to remedy. Great shooter...perfect timing."
That could be considered as throwing good money after bad.
|
^^^ This.
If it is a good shooter, keep shooting it. Unless you are an at least semi-skilled projects guy and would enjoy tackling this by yourself, a decent refurbishing/refinishing job will likely cost you more than the gun is worth, and not that much less than just buying another shooter-grade Victory with lanyard swivel and original finish intact.
|
04-05-2016, 09:52 PM
|
Member
|
|
|
Join Date: Mar 2016
Location: Marietta, GA
Posts: 79
Likes: 497
Liked 29 Times in 24 Posts
|
|
Thanks y'all for the info!!
As a Machinist for the past 35+ yrs but now retired, I can easily re-establish the lanyard hole (pin is still in place) and also have connections with a plating facility to strip.
Maybe if stripping results are satisfactory, possibly then cerakote finish to a flat black.
I feel I'd at least like return this piece back to some form of respectability.
Obviously, I don't consider this as an investment.
|
The Following 2 Users Like Post:
|
|
04-05-2016, 10:14 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2016
Location: trail's end in ol' Wyo
Posts: 7,243
Likes: 17,466
Liked 18,432 Times in 5,043 Posts
|
|
I like your thinking, BillsCamino.
Make the gun what you want it to be so you will appreciate and enjoy it and its history. That, to me, is what owning these things is all about. I've never been one to attempt to fit some "mold" of what I or my possessions should be. I'm the only one I need to make happy.
Good on ya'.
Cheers,
Bob
__________________
Wrangler of stray Chiefs
Bob
|
04-05-2016, 11:32 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by BillsCamino
Thanks y'all for the info!!
As a Machinist for the past 35+ yrs but now retired, I can easily re-establish the lanyard hole (pin is still in place) and also have connections with a plating facility to strip.
Maybe if stripping results are satisfactory, possibly then cerakote finish to a flat black.
I feel I'd at least like return this piece back to some form of respectability.
Obviously, I don't consider this as an investment.
|
That puts things in a different light. I suggest you also get rid of the grips; original Victory stocks are easy to find on ebay or Gunbroker. And the hammer and trigger were originally case-hardened; when you strip the nickel, you might want to either replace them (more expensive option) or leave them in the white (cheaper); the case-hardening will be gone after stripping, but either option will look better than finishing them the same as the rest of the gun, something most refinishers in earlier years unfortunately couldn't resist.
|
The Following 2 Users Like Post:
|
|
04-06-2016, 08:22 AM
|
Member
|
|
|
Join Date: Mar 2016
Location: Marietta, GA
Posts: 79
Likes: 497
Liked 29 Times in 24 Posts
|
|
Thanks for the replies y'all.
I've actually done both already...found decent smooth walnut grips and original hammer & trigger assemblies on Ebay.
Also mailed the History Request form on this piece into S&W.
|
The Following 2 Users Like Post:
|
|
04-06-2016, 02:53 PM
|
|
SWCA Member
|
|
|
Join Date: Jul 2012
Location: AL Wiregrass
Posts: 7,217
Likes: 34,787
Liked 10,777 Times in 3,670 Posts
|
|
Welcome to the forums from the Wiregrass, Bill! You could Parkerize it. That would get it back closer to the original finish. It would look like this:
__________________
Guy
SWHF #474 SWCA LM#2629
|
The Following 3 Users Like Post:
|
|
04-06-2016, 04:15 PM
|
Member
|
|
|
Join Date: Mar 2016
Location: Marietta, GA
Posts: 79
Likes: 497
Liked 29 Times in 24 Posts
|
|
Great suggestion and pic Wiregrass...I'll look into that. Thanks
|
The Following User Likes This Post:
|
|
04-06-2016, 04:21 PM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,592
Likes: 239
Liked 29,100 Times in 14,071 Posts
|
|
Quote:
Originally Posted by BillsCamino
Great suggestion and pic Wiregrass...I'll look into that. Thanks
|
Phosphating it can be a DIY project, several kits are available. Of course, that will not make it original, but at least it will make it look approximately correct at a relatively modest cost after de-nickeling it. One of the spray and bake Teflon finishes would be a second DIY option. Or both. Phosphate makes a superior base coating for applying Teflon, extremely durable and corrosion resistant. I have done several guns that way.
Last edited by DWalt; 04-06-2016 at 04:25 PM.
|
The Following 4 Users Like Post:
|
|
04-07-2016, 01:17 AM
|
Member
|
|
|
Join Date: Jul 2015
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
|
I got a Victory Model recently, and I was wondering if you fine folks could tell me more about it. The serial number is V 359270.The grips appear to be original, smooth wood with the last 4 digits of the serial on the back. The top strap has what looks like an Ordnance bomb stamp, and then"U.S. PROPERTY GHD". The barrel has the patent dates and so on on the top, and is marked as being chambered in "38 S. & W. Special CTG".
Last edited by Beardless; 04-07-2016 at 01:20 AM.
Reason: removed unnecessary info.
|
04-07-2016, 08:58 AM
|
Member
|
|
|
Join Date: Jan 2012
Location: Southside
Posts: 920
Likes: 280
Liked 1,284 Times in 418 Posts
|
|
Mailed Roy Jinks for Victory history will post in month or so.
|
04-07-2016, 09:37 AM
|
Member
|
|
|
Join Date: Jan 2012
Location: Southside
Posts: 920
Likes: 280
Liked 1,284 Times in 418 Posts
|
|
Beardless sounds like nice Victory!!
|
04-07-2016, 10:10 AM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by Beardless
I got a Victory Model recently, and I was wondering if you fine folks could tell me more about it. The serial number is V 359270.The grips appear to be original, smooth wood with the last 4 digits of the serial on the back. The top strap has what looks like an Ordnance bomb stamp, and then"U.S. PROPERTY GHD". The barrel has the patent dates and so on on the top, and is marked as being chambered in "38 S. & W. Special CTG".
|
It sounds like you have an all-original standard US Victory model from mid-1943. It has all the expected standard markings and no unexpected ones. Statistically, it more likely shipped to the Navy, but other military destinations are also possible. A history letter would tell you, although it would get you no further than an Army depot or Navy yard stateside.
|
04-07-2016, 11:36 AM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,592
Likes: 239
Liked 29,100 Times in 14,071 Posts
|
|
V 359270
Closest SN I have listed is V3585xx which shipped in 7/43. A factory letter won't tell you much more than that, except it will provide an exact shipping date. And a Navy destination is very probable. The more interesting Victories are those which do not have the U.S. PROPERTY stamp.
|
The Following User Likes This Post:
|
|
04-07-2016, 09:52 PM
|
Member
|
|
|
Join Date: Apr 2016
Location: Lower Alabama
Posts: 2
Likes: 1
Liked 4 Times in 2 Posts
|
|
From an Estate sale
I am new to the gun collecting world, I know I have a S&W Victory model. She's a find from an estate sale, I do not have plans to sell the pistol. I have always wanted a pistol with some history.
Here's what I know:
It has the proof marks from the Birmingham Proof house
BV BP NP
It also is stamped: NOTENGLISHMAKE
The Serial number is: V8552
also the initials: WB *on the buttplate
Here are the pictures any information will be greatly appreciated
|
The Following 3 Users Like Post:
|
|
04-08-2016, 12:33 AM
|
Member
|
|
|
Join Date: Sep 2009
Location: Georgia
Posts: 2,685
Likes: 2,473
Liked 5,898 Times in 1,224 Posts
|
|
For the database:
Here is the info re: V-473586:
Victory model pawn shop rescue! DOB?
I also have two 5" Parkerized guns in .38 S&W:
1) Bavarian Municipal Police #V-665547
2) Osterreich Polizei # 890667
Last edited by policerevolvercollector; 04-08-2016 at 12:38 AM.
|
04-10-2016, 11:43 PM
|
Member
|
|
|
Join Date: Sep 2009
Location: Georgia
Posts: 2,685
Likes: 2,473
Liked 5,898 Times in 1,224 Posts
|
|
Another one:
I don't own it anymore. But 4" .38 spl #897263 lettered to the directly to the DSC.
|
04-11-2016, 11:33 AM
|
|
SWCA Member
|
|
|
Join Date: Jul 2012
Location: AL Wiregrass
Posts: 7,217
Likes: 34,787
Liked 10,777 Times in 3,670 Posts
|
|
Welcome to the forums from the Wiregrass, neighbor! Chances are the cylinder has been reamed out for .38 Special. You can check by trying to load a .38 Special cartridge. If it fully inserts, it has been reamed. That reduces the value. Around here, they sell for ~$200-300 if modified.
__________________
Guy
SWHF #474 SWCA LM#2629
|
04-12-2016, 10:58 PM
|
Member
|
|
|
Join Date: Apr 2016
Location: OK
Posts: 4
Likes: 3
Liked 8 Times in 3 Posts
|
|
Victory S&W Info
I have just filled out the S&W Letter of Authenticity Request Form but thought I'd post some info here on my S&W. I received it from my father-in-law who was a WW II veteran and a Corregidor POW. After the war he returned to AD and during an assignment to Spain (Torrejon AB) he acquired this .38 from military surplus sales. Here is the serial # and some images:
Serial V 734131 P
Any details or insight would be appreciated.
Bill R
OKC, OK
|
The Following 2 Users Like Post:
|
|
04-12-2016, 11:00 PM
|
Member
|
|
|
Join Date: Apr 2016
Location: OK
Posts: 4
Likes: 3
Liked 8 Times in 3 Posts
|
|
I just saw yesterday's post and my Victory does not fit a .38 Special cartridge. I was told by a gun shop that the correct cartridge was a .38 Colt Short.
Last edited by wildbi111; 04-12-2016 at 11:02 PM.
|
04-13-2016, 01:54 AM
|
|
US Veteran
|
|
|
Join Date: Jan 2016
Location: trail's end in ol' Wyo
Posts: 7,243
Likes: 17,466
Liked 18,432 Times in 5,043 Posts
|
|
Howdy Wild Bill, and welcome aboard.
The photo of the right side of your Victory shows ".38 S&W CTG," which is the name Smith & Wesson uses for the caliber. That's likely what you'll find on the contemporary boxes of ammo that fit your Victory.
Gorgeous revolver! Congrats on being its new owner, and thanks for sharing it with us. I'm relatively new to the Victory Model (this forum offers a wealth of "corporate knowledge" on the topic), but I'm guessing the left side of your gun has some interesting imprints as well.
I'm betting Absalom, DWalt, and others will be along shortly with more details for you.
Cheers,
Bob
__________________
Wrangler of stray Chiefs
Bob
|
04-13-2016, 03:05 AM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by wi.ldbi111
I have just filled out the S&W Letter of Authenticity Request Form but thought I'd post some info here on my S&W. I received it from my father-in-law who was a WW II veteran and a Corregidor POW. After the war he returned to AD and during an assignment to Spain (Torrejon AB) he acquired this .38 from military surplus sales. Here is the serial # and some images:
Serial V 734131 P
Any details or insight would be appreciated.
Bill R
OKC, OK
|
Bill:
From the looks of it, you inherited a very nice unmodified former British Service Revolver, based on the serial likely from late 1944. The cylinder has obviously, both from your photo and your try, not been converted to .38 Special from the original .38 S&W (or .38-200, as it was also called, but not labeled by the factory). Forget the ".38 Colt Short" thing. Colt called that cartridge ".38 Colt New Police", but that is not relevant to your gun. The revolvers which Colt produced for Britain in that caliber were actually stamped "38-200".
Everything seems to be original, finish, case-hardened trigger and hammer, numbered wooden stocks. There are British post-war proofmarks on the cylinder; are there others on the other side of the barrel that's not pictured? It should also say US PROPERTY G.H.D. with a flaming bomb before that on the left top strap.
If that's all present, you've got a Victory model, British edition, in about as good a shape as one can expect to find one these days.
Last edited by Absalom; 04-13-2016 at 03:14 AM.
|
04-13-2016, 03:25 AM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,592
Likes: 239
Liked 29,100 Times in 14,071 Posts
|
|
" I was told by a gun shop that the correct cartridge was a .38 Colt Short. "
It's not the correct cartridge for a .38/200, but you can indeed fire the .38 Short Colt in any .38 S&W revolver (or even in any .38 Special or .357 Magnum revolver also). It's a little under-diameter for a .38 S&W chamber and bore, but it does work. Also difficult to find, but it is useful in some competitive shooting games - such as ICORE.
The closest SN on my list is V7286xx which shipped in 11/44. Very near the end for the V-series before they became the SV-series.
|
04-13-2016, 09:50 AM
|
|
SWCA Member
|
|
|
Join Date: Jul 2012
Location: AL Wiregrass
Posts: 7,217
Likes: 34,787
Liked 10,777 Times in 3,670 Posts
|
|
Welcome to the forums from the Wiregrass, Bill!
__________________
Guy
SWHF #474 SWCA LM#2629
|
04-13-2016, 02:08 PM
|
Member
|
|
|
Join Date: Apr 2016
Location: OK
Posts: 4
Likes: 3
Liked 8 Times in 3 Posts
|
|
Thanks
All - Thanks for the responses. It's great to know the details like it is a British Service Revolver from late 1944. I've mailed my form to S&W to get the letter of authenticity.
To answer a few of the comments and questions. On the right side of the barrel it does say "38 S&W CTG". Also on the left, just above the cylinder it says "US Property GHD" with the "flaming bomb" in front of this.
re: the cartridge: I suspected the .38 Colt Short was not the correct size though I have fired the gun with this ammo. It seemed to have a little bit of blowback when fired which is what caused me to suspect it wasn't the correct cartridge. That said what .38 S&W ammo would you all recommend? Buffalo Bore, PPU, Winchester Super-X, Magtech Revolver, etc.?
Here are the pictures of the left side and the top:
Last edited by wildbi111; 04-13-2016 at 02:43 PM.
|
The Following 3 Users Like Post:
|
|
04-13-2016, 03:31 PM
|
|
SWCA Member
|
|
|
Join Date: Jul 2012
Location: AL Wiregrass
Posts: 7,217
Likes: 34,787
Liked 10,777 Times in 3,670 Posts
|
|
Welcome to the forums from the Wiregrass! You can shoot whatever you can find because the revolver is rugged enough to handle even hot ammo. Most of the .38 S&W I see is low velocity LRN...which is fine. But some indoor ranges won't let you shoot it because it isn't jacketed. Also, .38 S&W tends to be a bit expensive as compared to .38 Special. If you plan to shoot a lot of it, you might want to take up handloading.
__________________
Guy
SWHF #474 SWCA LM#2629
|
The Following 2 Users Like Post:
|
|
04-13-2016, 06:11 PM
|
Member
|
|
|
Join Date: Sep 2012
Posts: 4
Likes: 0
Liked 1 Time in 1 Post
|
|
S&W Victory
I have a Victory that is Navy marked s/n 5000
|
The Following User Likes This Post:
|
|
04-13-2016, 09:26 PM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,592
Likes: 239
Liked 29,100 Times in 14,071 Posts
|
|
Quote:
Originally Posted by danbtech
I have a Victory that is Navy marked s/n 5000
|
Do you mean V5000?
|
04-13-2016, 10:33 PM
|
Member
|
|
|
Join Date: Sep 2012
Posts: 4
Likes: 0
Liked 1 Time in 1 Post
|
|
sorry it has been a long day yes v 5000
|
04-14-2016, 01:03 AM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,592
Likes: 239
Liked 29,100 Times in 14,071 Posts
|
|
"All - Thanks for the responses. It's great to know the details like it is a British Service Revolver from late 1944. I've mailed my form to S&W to get the letter of authenticity."
Don't be too disappointed when you get the letter. It's not likely to tell you much information of value or interest beyond the date of its shipment from the factory. And it's clearly authentic already.
|
The Following User Likes This Post:
|
|
04-14-2016, 01:47 AM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by wi.ldbi111
All - Thanks for the responses. It's great to know the details like it is a British Service Revolver from late 1944. I've mailed my form to S&W to get the letter of authenticity.
|
As DWalt says, the info will not be earth-shaking, almost certainly Hartford Ordnance as destination, where all the lend-lease guns went for further distribution, plus the shipping date, but please post the letter or at least the info here when you get it. We have apparently been so successful in talking people out of lettering the BSR's that I wasn't able to find a single posted letter for one on the forum; lots of letters for US Victorys. I recently lettered my BSR too even though I pretty much knew what the letter was going to say; it's nice to have an actual data point.
As for ammo, as Wiregrassguy says, shoot any ammo in the caliber. The frame and cylinder of the M&P were always dimensioned to handle the higher .38 Special pressures; the cylinder just had the chambers bored for the slightly differently sized caliber for the BSR version.
|
The Following 2 Users Like Post:
|
|
04-14-2016, 10:35 AM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,520
Likes: 89,618
Liked 24,863 Times in 8,515 Posts
|
|
Quote:
Originally Posted by Muley Gil
Picked up a Victory today. Blued, 4" .38 special, post 1968 Magnas. Serial number V20210, all to the right of the lanyard loop, which is present. No topstrap markings. All number (except grips, of course) match.
Any idea where it may have shipped and shouldn't it have a Park-type finish? I'll try and post pictures later this weekend.
Poor quality indoor pictures added:
|
I was looking at this post:
Model 10?
and the finish on this demilled Victory looks a lot like mine. Were both refinished in the UK, with mine coming home to the US and the other staying there?
Inquiring minds wish we could know....
__________________
John 3:16
WAR EAGLE!
|
The Following User Likes This Post:
|
|
04-14-2016, 11:00 AM
|
Member
|
|
|
Join Date: Apr 2016
Location: Lower Alabama
Posts: 2
Likes: 1
Liked 4 Times in 2 Posts
|
|
Quote:
Originally Posted by Wiregrassguy
Welcome to the forums from the Wiregrass, neighbor! Chances are the cylinder has been reamed out for .38 Special. You can check by trying to load a .38 Special cartridge. If it fully inserts, it has been reamed. That reduces the value. Around here, they sell for ~$200-300 if modified.
|
Thanks neighbor!!! Sorry I have been away and hadn't checked up on my post. I paid $150 for it, haven't checked the cylinder yet. I will check the cylinder tonight after work. I'm just across the way on 84, the Wicksburg area.
|
The Following User Likes This Post:
|
|
04-14-2016, 12:21 PM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by Muley Gil
I was looking at this post:
Model 10?
and the finish on this demilled Victory looks a lot like mine. Were both refinished in the UK, with mine coming home to the US and the other staying there..
|
It's a possibility, but you'd have to construct a scenario that leaves the guns without any apparent markings. Neither yours nor this one (even though the collector is in the UK) seem to have been actual war-time Britain-bound guns, as any markings to that effect are missing. I suppose there is a small possibility they could have ended up in Britain as originally US Maritime Commission guns on ships handed over to the British under lend-lease. If they were refinished commercially post-war in Britain, they would have to have the British commercial proofs required for surplussed guns.
Have you thought of maybe lettering yours? With an unmarked topstrap, the letter will likely give you the end user. If it turns out to be a truck factory in Kansas, so much for the British refinish theory .
|
The Following 2 Users Like Post:
|
|
04-14-2016, 06:07 PM
|
US Veteran
|
|
|
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,520
Likes: 89,618
Liked 24,863 Times in 8,515 Posts
|
|
Yes, I've been kicking around the idea. Need to get my pictures onto a flash drive so that I can print them to send to Mr Jinks.
__________________
John 3:16
WAR EAGLE!
|
04-27-2016, 04:22 AM
|
|
US Veteran
|
|
|
Join Date: Jan 2016
Location: trail's end in ol' Wyo
Posts: 7,243
Likes: 17,466
Liked 18,432 Times in 5,043 Posts
|
|
Mine finally arrived tonight
Bill, at the LGS, called at about 6:30 tonight, "Bob, it's here." It had been a long day. Bill and I had been clearing the latest wet, heavy foot of snow; we were ready to be indoors and talk guns.
I slogged across the mud-sloppy street, slid open the door, kicked off my shoes, and heard Bill's first words, "Hi, Bob. I don't think it's ever been fired. The inside of the barrel looks like it just left the factory." Bill, his new-in-town brother, and I solved the world's problems for more than an hour, then I trudged back through the muck to home.
"It" is a Victory Model, sn V467553 in all the right places. The seller's photos showed lots of what appeared to be rust, but I interpreted the "stuff" to be cosmoline (or some other brown grease rust preventative). I spent about three hours cleaning the old gal, shot a few bad-light photos, and now I'm here telling you this tale. I'll be back with more (better I hope) photos later today.
For now, for you other geeks, there are no U.S. property markings; there's a "P" on the left side in front of the hammer, under the barrel, and on the cylinder; the German federal eagle proof mark on the barrel, frame, and cylinder; "65" and the Ulm, Germany, proof house's stag horn symbol on the frame, indicating the gun had been processed through there in 1965; an "S" on the cylinder and butt (must have failed its first factory inspection); "HEGE SCHW HALL" below the cylinder release, like others on this thread that were imported by Hege GMBH, & Company of Schwabisch Hall, West Germany, after the war. There's also a hard-to-read stamping along the back strap: roughly "SK • fürth • lL U ll". Along with the gun came U.S. Army papers approving the transport of the gun to the USA in 1966 by an Air Force civilian employee. He paid $22.25 for the gun at the Giebelstadt Rod and Gun Club in Northern Bavaria.
Don't be deceived by the shine in my crumby picture. This is S&W's original black finish. It is, indeed, that perfect (98%?). I feel honored to own this Victory, that, I'm guessing, shipped to some defense contractor in late 1943. I can't wait to get Roy's letter...
Cheers,
Bob
__________________
Wrangler of stray Chiefs
Bob
|
The Following 3 Users Like Post:
|
|
04-27-2016, 01:00 PM
|
|
US Veteran
|
|
|
Join Date: Jan 2016
Location: trail's end in ol' Wyo
Posts: 7,243
Likes: 17,466
Liked 18,432 Times in 5,043 Posts
|
|
Back with a few more photos. I've had the 1943 silver nickels and steel pennies since 1974, I picked up the license plate in 2006, and the BOYT 43 holster and my Victory Model arrived this month. If my Victory wasn't shipped in late 1943 my still life shots won't be technically correct, but I don't have 1944 pennies and getting a '44 Wyoming license plate would prove nearly impossible as they were made of cardboard that year to support the war effort.
Here's the best shot I can get of the stamp on the back strap. Here, again, is my guesstimation of what it might be: "SK • fürth • lL U ll" but the S could be a 5, and who knows about the bit that follows the town's name. I'd appreciate any help in decoding this.
And, can anyone confirm this might really have been a Victory Model box? It's not my gun's sn, but it does have a V. I'm a bit skeptical about the "RAMP FORESIGHT".
__________________
Wrangler of stray Chiefs
Bob
|
The Following User Likes This Post:
|
|
04-27-2016, 04:43 PM
|
|
Member
|
|
|
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,592
Likes: 239
Liked 29,100 Times in 14,071 Posts
|
|
Ramp front sights were not standard on K-frames until the early 1950s, so the box cannot be original to a Victory. Your revolver has the correct front sight. V467553 would indicate probable late 1943-early 1944 shipment.
|
The Following User Likes This Post:
|
|
04-27-2016, 06:07 PM
|
|
SWCA Member
|
|
|
Join Date: Nov 2008
Location: Central Illinois
Posts: 1,759
Likes: 2,572
Liked 2,697 Times in 607 Posts
|
|
Victory V28328
I am waiting to pick up my Victory serial number V28328. The serial number is on the butt, the barrel, the cylinder, and the right stock. No flaming bomb on the butt. No marking on the left hand top strap. .38 Special four inch barrel. I will post pictures when I pick it up.
Last edited by 625smith; 04-27-2016 at 06:38 PM.
|
04-28-2016, 12:28 AM
|
|
SWCA Member Absent Comrade
|
|
|
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,996 Times in 8,452 Posts
|
|
Quote:
Originally Posted by two-bit cowboy
........ the German federal eagle proof mark on the barrel, frame, and cylinder; "65" and the Ulm, Germany, proof house's stag horn symbol on the frame, indicating the gun had been processed through there in 1965; an "S" on the cylinder and butt (must have failed its first factory inspection); "HEGE SCHW HALL" below the cylinder release, like others on this thread that were imported by Hege GMBH, & Company of Schwabisch Hall, West Germany, after the war. There's also a hard-to-read stamping along the back strap: roughly "SK • fürth • lL U ll". Along with the gun came U.S. Army papers approving the transport of the gun to the USA in 1966 by an Air Force civilian employee. He paid $22.25 for the gun at the Giebelstadt Rod and Gun Club in Northern Bavaria.
Don't be deceived by the shine in my crumby picture. This is S&W's original black finish. It is, indeed, that perfect (98%?). I feel honored to own this Victory, that, I'm guessing, shipped to some defense contractor in late 1943. I can't wait to get Roy's letter...
|
Nice specimen. And quite interesting.
As for the backstrap stamping, "Sk. Fürth" stands for "Stadtkreis Fürth". You've figured out that Fürth is the city, in Northern Bavaria. A Stadtkreis, no longer in existence today, back then was an administrative unit, sort of like an urban county. What the stuff behind that means, I cannot fathom; maybe a letter/Roman numeral code for a sub-unit of some sort.
HEGE Jagd & Sport is a sporting goods dealer which got started in Schwäbisch-Hall in 1959, dealing in military surplus weapons; nowadays they do mostly muzzleloaders and blades and are best-known as a big Uberti distributor in Northern Europe, now located in Messkirch.
I look forward to hearing about the letter. Despite no topstrap marking, I don't see this gun shipping to a defense contractor stateside, since the DSC guns were actually sold to their recipients; it's hard to see how such a gun would end up issued by the US occupation authorities to local police in Bavaria in 1945.
There is nothing in German law that requires importer marks; HEGE slapped their stamp on all surplus guns they sold back in the 60s. I guess the gun could have gone back to the US after occupation service and then be re-exported to Germany, but I would think it more likely that HEGE bought it out of some German police armory as surplus in the 60s, had it proofed at Ulm for public sale, and then it ended up at the rod and gun club where the AF employee purchased it.
|
The Following User Likes This Post:
|
|
|
|
Tags
|
380, cartridge, certificate, commercial, gunsmith, k frame, leather, military, model 10, parkerized, postwar, scope, sideplate, sig arms, smith and wesson, smith-wessonforum.com, springfield, stag, swca, trademark, united states property, victory, walnut, wondersight, wwii |
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
|
|
|
|