Smith & Wesson Forum

Go Back   Smith & Wesson Forum > Smith & Wesson Revolvers > S&W Hand Ejectors: 1896 to 1961
o

Notices

S&W Hand Ejectors: 1896 to 1961 All 5-Screw & Vintage 4-Screw SWING-OUT Cylinder REVOLVERS, and the 35 Autos and 32 Autos


Reply
 
Thread Tools Display Modes
  #2051  
Old 11-28-2019, 03:05 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by donkoz View Post
Serial number on the bottom of the barrel: V282560
The serial places it in mid-1943.

You show the serial on the underbarrel, which is indeed the correct serial. But the legal primary serial (same number) should be on the bottom of the butt, next to a (likely plugged) hole for the lanyard swivel this gun used to have.

Also, is there a US PROPERTY GHD stamping visible on the top strap above the cylinder?
Reply With Quote
  #2052  
Old 11-28-2019, 03:52 PM
donkoz donkoz is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Nov 2019
Posts: 2
Likes: 2
Liked 0 Times in 0 Posts
Default

Plugged hole there. No serial number on butt or evidence there was one. No US stamp on top.
Reply With Quote
  #2053  
Old 11-28-2019, 04:08 PM
Kurusu's Avatar
Kurusu Kurusu is offline
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Oct 2017
Location: Portugal
Posts: 5,538
Likes: 39,612
Liked 18,061 Times in 4,567 Posts
Default

Ok. I have a good(bad) one to show.

5 inch barrel. .38 S & W. Refinished, it's now blued instead of parkerized. Barrel has no number at all. Assembly numbers on frame and crane don't match. Cylinder number does not match. A good thing, it still has it's own sideplate.. It's marked US property GHD on the top strap and p behind the cylinder. And it's marked Bavaria Municipal Police. No British marks. A marking I can't decypher above the front end of the trigger guard. Serial number V666397(great three first numbers, right?).

It's still a work in progress. It came with the bolt plunger bushing missing. Fixed that only to find out the crane was out of whack so the latch will not close because the center pin will not align with the hole. currently waiting for the tool to fix that to arrive.


But it was the only M & P type I found. So I bought it anyway

Edit. Almost forgot. It has "modern" German civilian proof marks.

Now my usual lousy pictures.

Victory data base-20191128_193922-jpg

Victory data base-20191128_194047-jpg

Victory data base-20191128_194129-jpg
Attached Images
File Type: jpg 20191128_193922.jpg (49.9 KB, 390 views)
File Type: jpg 20191128_194047.jpg (45.0 KB, 390 views)
File Type: jpg 20191128_194129.jpg (32.4 KB, 389 views)
__________________
Expect the unexpected

Last edited by Kurusu; 11-28-2019 at 07:34 PM.
Reply With Quote
The Following 3 Users Like Post:
  #2054  
Old 11-28-2019, 09:29 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by donkoz View Post
Plugged hole there. No serial number on butt or evidence there was one. No US stamp on top.
Then the butt serial has been scrubbed thoroughly, and it’s technically illegal. Since the property stamp could have been there or not, we can’t know anymore.

Quote:
Originally Posted by Kurusu View Post
It's marked US property GHD on the top strap and p behind the cylinder. And it's marked Bavaria Municipal Police. No British marks. A marking I can't decypher above the front end of the trigger guard. Serial number V666397...

Edit. Almost forgot. It has "modern" German civilian proof marks.
....
So the frame, originally made in mid-1944, was a Bavarian Police gun issued in early 1946 and then sold commercially (the proofs) in Germany. If the barrel does not have a German proof (I can’t see one), it was replaced after the gun left Germany. I can’t make out that other marking either.
Reply With Quote
The Following User Likes This Post:
  #2055  
Old 12-07-2019, 05:27 PM
21b o3 21b o3 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Oct 2010
Posts: 45
Likes: 9
Liked 108 Times in 22 Posts
Default

Quote:
Originally Posted by LOBO View Post
Can you share with us what department?
Lobo, sorry for delay, Hamilton County (Ohio) Sheriff.
Reply With Quote
  #2056  
Old 01-03-2020, 01:41 PM
franck1963 franck1963 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Oct 2011
Location: USA
Posts: 17
Likes: 0
Liked 14 Times in 4 Posts
Default

Hello everybody
Mine is V367699, US property on frame, G. H. D
38 s&w. Parkerized finish. Parachuted to french resistance by S.O.E (Someone was engraving his initials on left grip...)
Reply With Quote
The Following User Likes This Post:
  #2057  
Old 01-12-2020, 11:58 AM
joz's Avatar
joz joz is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Feb 2013
Location: Illinois
Posts: 17
Likes: 5
Liked 9 Times in 2 Posts
Default

Hello. I have another one to add.
V661635
US property on frame, G. H. D
Any info on ship date would be greatly appreciated.
Reply With Quote
  #2058  
Old 01-12-2020, 06:20 PM
DWalt's Avatar
DWalt DWalt is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,949 Times in 14,015 Posts
Default

Closest one I have listed is SN V662384, shipping on 8/22/44. Does it have a U. S. PROPERTY topstrap stamping? What is the caliber and barrel length?
Reply With Quote
  #2059  
Old 01-13-2020, 11:45 AM
joz's Avatar
joz joz is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Feb 2013
Location: Illinois
Posts: 17
Likes: 5
Liked 9 Times in 2 Posts
Default

DWalt,
V661635 has the following
-Flaming bomb, US property G. H. D on top strap
-38 special
-4" barrel

Thanks for the info!
Reply With Quote
  #2060  
Old 01-13-2020, 01:24 PM
DWalt's Avatar
DWalt DWalt is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,949 Times in 14,015 Posts
Default

Then it is most probably what is called the DSC version (Defense Supplies Corporation). DSC was a government agency, one of its functions being procurement of handguns for essential civilian users, such as civilian law enforcement agencies and defense plant security guards. During WWII, most sales of new guns to civilians was discontinued, as everything was going to the military (also true for automobiles). The fact that your Victory has no topstrap property stamping indicates it was not shipped for military service. There are other possibilities, for example, guns supplied to the Merchant Marine and OSS, which are similarly unmarked. But in the grand scheme, almost all Victories without a topstrap property stamping will be DSC.

Last edited by DWalt; 01-13-2020 at 01:34 PM.
Reply With Quote
  #2061  
Old 01-13-2020, 02:01 PM
joz's Avatar
joz joz is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Feb 2013
Location: Illinois
Posts: 17
Likes: 5
Liked 9 Times in 2 Posts
Default

DWalt ,
As previously stated (V661635) does have the tops trap stamped with the flaming bomb + US PROPERTY GHD.
Reply With Quote
  #2062  
Old 01-13-2020, 02:39 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by franck1963 View Post
Hello everybody
Mine is V367699, US property on frame, G. H. D
38 s&w. Parkerized finish. Parachuted to french resistance by S.O.E (Someone was engraving his initials on left grip...)
The gun would be from later 1943, maybe August.

Since your header says USA/France, may we assume the gun is in France and you have some provenance on it? Both SOE and OSS did provide these to the resistance.
Reply With Quote
  #2063  
Old 01-13-2020, 06:13 PM
DWalt's Avatar
DWalt DWalt is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,949 Times in 14,015 Posts
Default

"DWalt ,
As previously stated (V661635) does have the tops trap stamped with the flaming bomb + US PROPERTY GHD."


Sorry, that did not register. Too much in a hurry I guess. With the topstrap stamping, it's about 99% certain it went to the U. S. Navy. GHD are the initials of Col (later Brigadier General) Guy H. Drewry, Army Inspector of Ordnance for the Springfield Ordnance District. See: Brigadier General Guy H. Drewry, Ordnance Corps Hall of Fame Inductee 1996, U.S. Army Ordnance Corps
Reply With Quote
  #2064  
Old 01-19-2020, 07:03 PM
max136 max136 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 3
Likes: 2
Liked 4 Times in 1 Post
Default

hello, just joined the forum and i would like to know more about the victory model i just picked up. S/N V492072 has what appears to be german proof stamps, RH stock has complete SN stamped in it. any information would be great. forgot to add, has a "Geco" stamp on the butt.
Attached Images
File Type: jpg bmcLJHK.jpg (36.2 KB, 34 views)
File Type: jpg mQQoB1T.jpg (26.0 KB, 23 views)
File Type: jpg V1yPO79.jpg (29.2 KB, 25 views)
File Type: jpg rj5pGXr.jpg (42.7 KB, 25 views)
File Type: jpg 0Q0jBd8.jpg (54.0 KB, 31 views)

Last edited by max136; 01-19-2020 at 07:04 PM.
Reply With Quote
  #2065  
Old 01-19-2020, 08:11 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by max136 View Post
hello, just joined the forum and i would like to know more about the victory model i just picked up. S/N V492072 has what appears to be german proof stamps, RH stock has complete SN stamped in it. any information would be great. forgot to add, has a "Geco" stamp on the butt.
It shipped originally in early 1944.

After the war, it was issued by US occupation authorities to Bavarian police in early 1946, where it remained into the 1950s. The milled-out area on the left frame said most likely BAVARIA (on top) and RURAL or BORDER POLICE (on the bottom). It looks a bit short for MUNICIPAL, the other option.

Then it was sold, with many companions, to Geco, a large dealer/wholesaler, who put his mark on it and had it commercial-proofed for Germany, and from there it made its way through the surplus market into your hands.
Reply With Quote
The Following 2 Users Like Post:
  #2066  
Old 01-19-2020, 09:41 PM
DWalt's Avatar
DWalt DWalt is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,949 Times in 14,015 Posts
Default

I have seen several others having the German police markings milled off. I have read that some of these revolvers were sold off very cheaply through U. S. Military Rod and Gun Clubs at bases in Germany during the postwar period.
Reply With Quote
  #2067  
Old 01-19-2020, 11:46 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by DWalt View Post
I have seen several others having the German police markings milled off. I have read that some of these revolvers were sold off very cheaply through U. S. Military Rod and Gun Clubs at bases in Germany during the postwar period.
It is not clear who did the milling, but at least by my unscientific observation there are more ex-Bavarian revolvers in the market with the marking intact than with it milled out. I also know for a fact that Bavaria sold these centrally, so they were all treated alike, which means the milling occurred post-service by some subsequent wholesaler.

In view of the more restrictive gun laws in West Germany which limited the customer base, selling these cheaply to rod-and-gun clubs on US bases, most conveniently located in Southern Germany where these guns were on offer, was an attractive option.
Reply With Quote
The Following User Likes This Post:
  #2068  
Old 01-20-2020, 07:06 PM
Jetfixer3 Jetfixer3 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Feb 2019
Posts: 3
Likes: 2
Liked 2 Times in 1 Post
Default

Another Victory to add. Purchased at a gun show approximately a year ago for $600. S/N on the butt, bottom of the barrel, and rear face of the cylinder is V390652. Right grip also has the same serial number. The 5” barrel has the typical Smith & Wesson patent information on the top, Smith & Wesson on the left side, and 38 S & W Special Ctg on the right side. The upper top strap has, starting from the front, the flaming bomb, U S Property, G.H.D. The right side plate has the S & W trademark logo. Bottom right side of the frame has Made In USA. Overall the parkerized revolver is in excellent shape. Very faint turn line on the cylinder and hardly any wear to the finish on the ejector rod.
Reply With Quote
  #2069  
Old 01-20-2020, 07:22 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by Jetfixer3 View Post
...S/N on the butt, bottom of the barrel, and rear face of the cylinder is V390652. Right grip also has the same serial number. The 5” barrel has the typical Smith & Wesson patent information on the top, Smith & Wesson on the left side, and 38 S & W Special Ctg on the right side...
The serial places the gun in later 1943.

But there is a problem. At that point in time, there were no Victory models made in .38 Special with a 5” barrel. So a gun with 5” barrel, .38 Special on that barrel, and matching serials on butt and barrel flat cannot exist unless it’s a complete post-war rebuilt from unmarked M&P parts, which would be odd.

Are you certain that you measured the barrel length correctly?
Reply With Quote
  #2070  
Old 01-20-2020, 08:53 PM
DWalt's Avatar
DWalt DWalt is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,949 Times in 14,015 Posts
Default

I noticed the same thing. At that time, only those Victories chambered in .38 S&W had 5" barrels, and those with 4" barrels left the factory chambered for .38 S&W Special. Those are two different cartridges. Are you sure that the original factory barrel stamping says .38 S&W Special CTG, or is it possibly .38 S&W CTG? So something is amiss in your description or else your Victory is not in its original as-manufactured configuration. The barrel length is measured from the front face of the cylinder to the muzzle.

The closest SN on my list to your V390652 is V389892 which shipped in 9/43.

Last edited by DWalt; 01-20-2020 at 09:03 PM.
Reply With Quote
  #2071  
Old 01-20-2020, 10:04 PM
LAJW_III LAJW_III is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
Default

I recently was shown a revolver I was told was RCMP issued, and was wondering about it's provenance.
It's a 38spl S&W model 10 ( I believe) with serial number V636851, can anyone tell me the date of issue? I'm sorry I don't know any more markings, are there marks I should look for that might give more information?

Sent from my moto g(7) power using Tapatalk
Reply With Quote
  #2072  
Old 01-20-2020, 10:50 PM
Muley Gil Muley Gil is offline
US Veteran
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Feb 2005
Location: The SW Va Blue Ridge
Posts: 17,474
Likes: 88,979
Liked 24,786 Times in 8,483 Posts
Default

Welcome to new members max136, Jetfixer3 and LAJW III.

LAJW III, you have a .38 Victory model from WW II. Model numbers were not assigned by S&W until 1957.

How long is the barrel and how does the caliber stamp read? Generally, 4" barreled Victories were chambered in .38 special and 5" barreled Victories were chambered in .38 S&W, which is a shorter, fatter cartridge that does not interchange with the .38 special. However, after the war, many of the .38 S&W revolvers were rechambered to .38 special.
__________________
John 3:16
WAR EAGLE!
Reply With Quote
  #2073  
Old 01-20-2020, 11:24 PM
LAJW_III LAJW_III is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
Default

Got ahold of these pics:

Sent from my moto g(7) power using Tapatalk
Reply With Quote
  #2074  
Old 01-20-2020, 11:25 PM
LAJW_III LAJW_III is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
Default

It says "38 S.&W.Special CTG" on the barrel, in case it isn't clear in the pic.

Sent from my moto g(7) power using Tapatalk
Reply With Quote
  #2075  
Old 01-20-2020, 11:30 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by LAJW_III View Post
I recently was shown a revolver I was told was RCMP issued, and was wondering about it's provenance.
It's a 38spl S&W model 10 ( I believe) with serial number V636851, can anyone tell me the date of issue? I'm sorry I don't know any more markings, are there marks I should look for that might give more information?
In regards to the RCMP, while anything is possible during wartime, the RCMP’s issue sidearm from the early 1900s until the early 1950s was the .455/.45 Colt New Service, and there seems to be no compelling reason why they should have ended up with a different brand and different caliber. So unless there is any kind of documentation, any connection would be hard to prove. There was no standard identifying marking which I’m aware of, and the gun, no matter which type of Victory it is, would be unlikely to letter directly to a foreign agency at that time.

The revolver, based on the serial, was made in mid-1944.
Reply With Quote
  #2076  
Old 01-20-2020, 11:45 PM
LAJW_III LAJW_III is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Absalom View Post
In regards to the RCMP, while anything is possible during wartime, the RCMP’s issue sidearm from the early 1900s until the early 1950s was the .455/.45 Colt New Service, and there seems to be no compelling reason why they should have ended up with a different brand and different caliber. So unless there is any kind of documentation, any connection would be hard to prove. There was no standard identifying marking which I’m aware of, and the gun, no matter which type of Victory it is, would be unlikely to letter directly to a foreign agency at that time.



The revolver, based on the serial, was made in mid-1944.
Thanks for the date info!
No documentation on the RCMP link, it's just a Canadian guy who has it! Victory data base
Probably what he was told third or fourth hand, who knows.

Which cartridge is this chambered in, 38spl or 38S&W? The barrel seems... ambiguous to me.

Sent from my moto g(7) power using Tapatalk
Reply With Quote
  #2077  
Old 01-21-2020, 12:03 AM
Texas Star Texas Star is offline
US Veteran
Absent Comrade
Victory data base Victory data base  
Join Date: Mar 2005
Location: Texas
Posts: 20,362
Likes: 24,260
Liked 16,154 Times in 7,408 Posts
Default

LAJW-


Read the (four-inch) barrel! It's a .38 Special. No idea how a Canadian got it, but no RCMP provenance.

Their guns usually have an intertwined MP marking, BTW.

They adopted the M&P in 1954, and it became the Model 10 after 1957. Their guns had five inch barrels, commercially blued, and were std. until replaced by S&W DA-only 9mm's, I think around 1990.

Guns like that shown are known mainly for USN use, esp. by aviators. But USAF used many during the Viet war, due to shortages of our Combat Masterpiece .38. I often wore a Victory model then.

Last edited by Texas Star; 01-21-2020 at 12:13 AM.
Reply With Quote
The Following 2 Users Like Post:
  #2078  
Old 01-21-2020, 12:11 AM
LAJW_III LAJW_III is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Texas Star View Post
L JW_


Read the barrel! It's a .38 Special. No idea how a Canadian got it, but no RCMP provenance.

Their guns usually have an intertwined MP marking, BTW.

They adopted the M&P in 1954, and it became the Model 10 after 1957. Their guns had five inch barrels, commercially blued, and were std. until replaced by S&W DA-only 9mm's, I think around 1990.

Guns like that shown are known mainly for USN use, esp. by aviators. But USAF used many during the Viet war, due to shortages of our Combat Masterpiece .38. I often wore a Victory model then.
Barrel says 38S.&W.Special, that's why I was asking. You're saying that means 38spl, good enough for me.

Sent from my moto g(7) power using Tapatalk
Reply With Quote
  #2079  
Old 01-21-2020, 12:24 AM
Texas Star Texas Star is offline
US Veteran
Absent Comrade
Victory data base Victory data base  
Join Date: Mar 2005
Location: Texas
Posts: 20,362
Likes: 24,260
Liked 16,154 Times in 7,408 Posts
Default

Yes, .38 S&W Special is the ctg. There was a .38 Colt Special, differing only in having a flatter nose profile on the bullet.

You seem BADLY in need of basic gun knowledge. I suggest finding and buying Geoffrey Boothroyd's, The Handgun, Crown Publishers, 1970 and Elmer Keith's, Sixguns, 1961 rev. ed. Those are a good basic start in learning.
Reply With Quote
  #2080  
Old 01-21-2020, 12:43 AM
LAJW_III LAJW_III is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Texas Star View Post
Yes, .38 S&W Special is the ctg. There was a .38 Colt Special, differing only in having a flatter nose profile on the bullet.

You seem BADLY in need of basic gun knowledge. I suggest finding and buying Geoffrey Boothroyd's, The Handgun, Crown Publishers, 1970 and Elmer Keith's, Sixguns, 1961 rev. ed. Those are a good basic start in learning.
Thanks for being rude to someone asking for help. The other member above stated that 38S&W was different from 38SPL. The weapon I was asking about is marked with both terms.
I'm sorry my knowledge of 80 year old guns isn't up to your standards.
I'll stick with my 19 years (so far) of experience with modern weapons across 7 years of combat in three theaters.

Sent from my moto g(7) power using Tapatalk
Reply With Quote
  #2081  
Old 01-21-2020, 12:11 PM
Jetfixer3 Jetfixer3 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Feb 2019
Posts: 3
Likes: 2
Liked 2 Times in 1 Post
Default

Gentlemen. I sincerely apologize for any confusion that I caused yesterday by mistakenly saying that my Victory revolver S/N V390652 had a 5” barrel. It was totally my mistake as it really is a 4” barrel. All the other information I gave was correct. I really do know how to measure a revolver barrel and how to read a ruler. Why I typed 5 instead of 4 I will never know.
Reply With Quote
The Following 2 Users Like Post:
  #2082  
Old 01-22-2020, 02:31 AM
lazytrbar lazytrbar is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 3
Likes: 0
Liked 1 Time in 1 Post
Default

Does the victory database note if the submission was a “red letter” revolver? I ask because I’m curious if these were encountered around a specific serial number range or were more random. Over on gunboards for example I was just looking at a pre victory gun red letter marked property of u.s. navy. It was surprising to me as I thought that was a Victory revolver only pantograph marking on guns shipped to navy. Admittedly I’m new to this. How early was the navy doing this? Did they apply it to non S&W guns?


Sent from my iPad using Tapatalk
Reply With Quote
  #2083  
Old 01-22-2020, 11:28 AM
DWalt's Avatar
DWalt DWalt is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Dec 2009
Location: South Texas & San Antonio
Posts: 33,483
Likes: 236
Liked 28,949 Times in 14,015 Posts
Default

The Red (and White) letter revolvers were not engraved by S&W. Apparently early on, they were engraved at various Navy yards and the engraving filled with paint. So historical letters will not address the property engraving. The highest SN on my list having an engraving is V1354xx, but most on my list are either pre-Victories or very low in the Victory SN range.
Reply With Quote
The Following User Likes This Post:
  #2084  
Old 01-22-2020, 02:31 PM
Mckoy86 Mckoy86 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Location: Czech republik
Posts: 2
Likes: 1
Liked 5 Times in 2 Posts
Default

Good day . this is my new SW model Victory. SN V452492. There is a special BAZ marking on the rear handle. The numbers on all parts match. Sorry for my English.
Reply With Quote
The Following 4 Users Like Post:
  #2085  
Old 01-22-2020, 03:40 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by Mckoy86 View Post
Good day . this is my new SW model Victory. SN V452492. There is a special BAZ marking on the rear handle. The numbers on all parts match. Sorry for my English.
The gun is originally from later 1943, around November.

After the war, US authorities issued it to German police in occupied Berlin.

The stamp means
B = Berlin
A = Amerikanischer Sektor
Z = Zehlendorf (the city district)

Above is the Berlin police star, sometimes called a sunburst or rosette.
Reply With Quote
The Following 3 Users Like Post:
  #2086  
Old 01-22-2020, 06:39 PM
Mckoy86 Mckoy86 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Location: Czech republik
Posts: 2
Likes: 1
Liked 5 Times in 2 Posts
Default

Thanks you Very match. Caliber 38 SW Special. Barel 4 inches.
Reply With Quote
The Following User Likes This Post:
  #2087  
Old 01-26-2020, 07:20 PM
Puller's Avatar
Puller Puller is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Location: North Mississippi
Posts: 2,053
Likes: 5,325
Liked 9,042 Times in 1,545 Posts
Default

This has been a very interesting thread.

I have a Victory, serial number V639265 to share for the data base. Serial number is also on the outer lip of the cylinder face.

It has a flaming bomb on the right side but has no other government markings. Top strap has no markings.

It has been Parkerized at some point.

Any information would be appreciated.







[img]https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/82979036_2735693296496756_5011559216125575168_o.jpg?_nc_cat=110&_nc_ohc=tgoUPO8**akAX85E9hu&_nc_ht=scontent-dfw5-1.xx&oh=fd685142e51f9dd2674e7829beac1792&oe=5E93B021[/img]
__________________
Live long and prosper
Reply With Quote
The Following 2 Users Like Post:
  #2088  
Old 01-27-2020, 04:57 PM
chiefdave's Avatar
chiefdave chiefdave is online now
US Veteran
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Dec 2017
Location: Warsaw, Missouri
Posts: 952
Likes: 1,347
Liked 2,104 Times in 539 Posts
Default

Quote:
Originally Posted by Puller View Post
This has been a very interesting thread.

I have a Victory, serial number V639265 to share for the data base. Serial number is also on the outer lip of the cylinder face.

It has a flaming bomb on the right side but has no other government markings. Top strap has no markings.

It has been Parkerized at some point.

Any information would be appreciated.
That's an odd placement for the flaming bomb and the finish looks like Parkerizing. Could be an arsenal refinish. Is there a P stamped on the left side of the frame under the hammer, rear face of the cylinder and on the barrel flat? More pictures would be helpful.
Reply With Quote
  #2089  
Old 01-27-2020, 05:54 PM
Quiet 1's Avatar
Quiet 1 Quiet 1 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: May 2012
Location: Southwest Florida
Posts: 77
Likes: 332
Liked 348 Times in 49 Posts
Default

RE: Puller's post from yesterday.

It's certainly been refinished (parkerized... different from the original S&W proprietary phosphate 'Military Midnight Black' ). Perhaps the flaming bomb, U.S. Property, G.H.D. stamping was removed???

It's also odd that the flaming bomb Ordnance acceptance stamp is missing from both the frame 'butt' and the top strap but a, what appears to me, oversized rendering is stamped on the frame beneath the MADE IN U.S.A.

Is the bottom of the barrel (when cylinder is open) clearly marked V 639265? Are the grips numbered to the gun?
__________________
Illegitimi Non Carborundum

Last edited by Quiet 1; 01-27-2020 at 05:59 PM.
Reply With Quote
  #2090  
Old 01-27-2020, 06:07 PM
Puller's Avatar
Puller Puller is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Location: North Mississippi
Posts: 2,053
Likes: 5,325
Liked 9,042 Times in 1,545 Posts
Default

Does not appear to be a P stamped anywhere. Grips are marked with s/n .

Here's some more pictures as requested.



[img]https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/83787849_2737608116305274_4792861311069323264_o.jpg?_nc_cat=109&_nc_eui2=AeH9CQEMpz8jPbPuVakb--SRKAAWVdisqxcw8vzr6SiZAQRkDVVFCg5NUFuwU7qZzGG**qYDzOdmFqqzQdwu6hPVpdX_RgtnMFLubsLYYFnBPQ&_nc_ohc=eA-8dEKFRhgAX9Knz1I&_nc_ht=scontent-dfw5-1.xx&oh=151ec857a3eb69b0106d9be0a77d7ee7&oe=5E96EF7C[/img]



[img]https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-0/p640x640/84615487_2737607606305325_5962609093087592448_o.jpg?_nc_cat=109&_nc_eui2=AeEpw13aoRaN3Ov9NIQc4I4459UIUATvt5FsRdgpq3iAwDME**Rhhhvt5fYrB9uTlxCaXbMh0WrqUyrOi5woAQ9YseFzqPklY33Ey4zSEBcpAg&_nc_ohc=Ntl1NZ7rnboAX9uek_r&_nc_ht=scontent-dfw5-1.xx&_nc_tp=6&oh=2adbf60e5298ac680e174c2da266085c&oe=5E9498CC[/img]





__________________
Live long and prosper

Last edited by Puller; 01-27-2020 at 06:09 PM.
Reply With Quote
  #2091  
Old 01-27-2020, 06:25 PM
Quiet 1's Avatar
Quiet 1 Quiet 1 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: May 2012
Location: Southwest Florida
Posts: 77
Likes: 332
Liked 348 Times in 49 Posts
Default

Quote:
Originally Posted by Puller View Post
Does not appear to be a P stamped anywhere. Grips are marked with s/n. Here's some more pictures as requested.
It's clear in the third photo that the serial number has been ground off the bottom of the barrel (or, it's a replacement barrel that was never numbered). However, the grips, cylinder and frame match. The normal ordnance acceptance stamps are gone, but, an oversize flaming bomb has been applied to the frame's right side.

I don't have any guesses other then the missing serial number and ordnance acceptance stamps were removed during the refinishing prep. Perhaps someone will be along with a plausible explanation or theory.
__________________
Illegitimi Non Carborundum

Last edited by Quiet 1; 01-27-2020 at 06:28 PM.
Reply With Quote
  #2092  
Old 01-28-2020, 03:00 PM
franck1963 franck1963 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Oct 2011
Location: USA
Posts: 17
Likes: 0
Liked 14 Times in 4 Posts
Default

Quote:
Originally Posted by Absalom View Post
The gun would be from later 1943, maybe August.

Since your header says USA/France, may we assume the gun is in France and you have some provenance on it? Both SOE and OSS did provide these to the resistance.
Yes, this revolver is in France . Provided to local resistance group (Area of Toulouse) The owner of gun was engraving his initials on left grip. The gun was bought to grandson of this man.
Reply With Quote
The Following 3 Users Like Post:
  #2093  
Old 01-28-2020, 05:00 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by Puller View Post
....
I have a Victory, serial number V639265 to share for the data base. Serial number is also on the outer lip of the cylinder face.

It has a flaming bomb on the right side but has no other government markings. Top strap has no markings.
By V 639265, mid-1944, all Victorys, whether military or DSC, received the triple P proof, so while a non-serialed (probably post-war) replacement barrel won’t have one, those on cylinder and frame in front of the hammer should be there.

US arsenal refinished Victorys aren’t a thing. That doesn’t mean that some bored unit or depot armorer somewhere might not have done a gun or a few, but there was no organized effort or program like on earlier .38 DA Colts during WW I or the .45 revolvers in the inter-war years. The military had too many after 1945 and started surplusing them out and selling them on to PD’s and such soon after the war.

Another consideration is that the original US Ordnance flaming bomb was not standardized and appeared in various shapes and sizes. And any ordnance stamp you desire is available for purchase, surplus and replica. It will be hard, likely impossible, to determine whether this stamp means anything or the refinisher just fancied a cool decoration.
Attached Images
File Type: jpg 09FA0662-4B7B-4BA2-9076-FCB38C809ED8.jpg (60.9 KB, 18 views)
File Type: jpeg D4F9C0C6-5C60-46B1-B420-60D17DAFEBD8.jpeg (102.0 KB, 18 views)
File Type: jpg 5F02AF66-D40F-42CA-8D32-6EE1AC541160.jpg (27.5 KB, 19 views)
Reply With Quote
The Following 2 Users Like Post:
  #2094  
Old 01-28-2020, 05:50 PM
anonymouscow anonymouscow is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 35
Likes: 1
Liked 25 Times in 14 Posts
Default

Quote:
Originally Posted by Puller View Post
Does not appear to be a P stamped anywhere. Grips are marked with s/n
I am pretty sure I can make out a “P” on the frame and one on the cylinder, I looked on where they were on one of mine so I would know where to look. They are both faint, but once I zoomed in they can be made out.

I am fairly new to the Victory world but I don’t think I have seen a flaming bomb in that location either. I would lean toward thinking it is a more recent addition, it looks pretty well defined, most of the other markings are pretty well worn. Maybe a DSC firearm someone added the flaming bomb to, no real reason to grind the top off just to add a bomb somewhere else, unless it was just too far worn after refinishing.

Last edited by anonymouscow; 01-28-2020 at 06:16 PM.
Reply With Quote
The Following 2 Users Like Post:
  #2095  
Old 01-28-2020, 07:05 PM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by anonymouscow View Post
I am pretty sure I can make out a “P” on the frame and one on the cylinder, I looked on where they were on one of mine so I would know where to look. They are both faint, but once I zoomed in they can be made out.
.....
Bingo. You got better eyes than I do. I had to bring the photos up on the desktop and enlarge them, but I’ve got both P’s now, too. Especially the one on the frame suffered a lot from the refinish. They’re usually much sharper.
Attached Images
File Type: jpg 32856BD4-53B5-4EB5-ADFA-1DEA45C48848.jpg (45.1 KB, 26 views)
Reply With Quote
The Following User Likes This Post:
  #2096  
Old 01-28-2020, 08:38 PM
Puller's Avatar
Puller Puller is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Location: North Mississippi
Posts: 2,053
Likes: 5,325
Liked 9,042 Times in 1,545 Posts
Default

Quote:
Originally Posted by anonymouscow View Post
I am pretty sure I can make out a “P” on the frame and one on the cylinder, I looked on where they were on one of mine so I would know where to look. They are both faint, but once I zoomed in they can be made out.
Quote:
Originally Posted by Absalom View Post
Bingo. You got better eyes than I do. I had to bring the photos up on the desktop and enlarge them, but I’ve got both P’s now, too. Especially the one on the frame suffered a lot from the refinish. They’re usually much sharper.
Okay, now that I know where to look I can see the "P" on the frame and the "P" on the cylinder face.

The flat area under the barrel does not show any tell tale signs of grinding, so I'm assuming it may be a replacement barrel.

I appreciate the information gentlemen.
__________________
Live long and prosper

Last edited by Puller; 01-28-2020 at 08:40 PM.
Reply With Quote
The Following User Likes This Post:
  #2097  
Old 02-06-2020, 09:48 AM
anonymouscow anonymouscow is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 35
Likes: 1
Liked 25 Times in 14 Posts
Default

Pre-Victory Model?

I ran across a thread, linked above, that has a pre-victory with similar characteristics to the victory in the previous few posts, pictures from that thread posted below.

Similar flaming bomb (except on the left side of the frame), barrel swap (except serial numbers re-stamped), and looks to be refinished.





Reply With Quote
The Following User Likes This Post:
  #2098  
Old 02-06-2020, 12:05 PM
anonymouscow anonymouscow is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2020
Posts: 35
Likes: 1
Liked 25 Times in 14 Posts
Default



This was my attempt to compare the two flaming bombs. I am just using my phone so it’s not exact, also the photo on the left was taken at an angle and it looks like they were struck a little differently or worn differently. The flames look a little different, not that it it really makes a difference one way or another, it’s mostly just how I entertain myself.
Reply With Quote
The Following 2 Users Like Post:
  #2099  
Old 02-09-2020, 11:17 AM
CharlieP187 CharlieP187 is offline
Member
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Feb 2020
Posts: 3
Likes: 3
Liked 0 Times in 0 Posts
Default Victory Model that I inherited

I am looking for info on the history of the pistol that I inherited from my Mom.
The serial number is V231531. It has the large "P" stamp on the barrel and the "BNP" proof mark.


Any info is appreciated.

Last edited by CharlieP187; 02-09-2020 at 11:19 AM.
Reply With Quote
  #2100  
Old 02-09-2020, 11:51 AM
Absalom's Avatar
Absalom Absalom is offline
SWCA Member
Absent Comrade
Victory data base Victory data base Victory data base Victory data base Victory data base  
Join Date: Jan 2014
Location: Oregon
Posts: 12,834
Likes: 10,103
Liked 27,995 Times in 8,452 Posts
Default

Quote:
Originally Posted by CharlieP187 View Post
I am looking for info on the history of the pistol that I inherited from my Mom.
The serial number is V231531. It has the large "P" stamp on the barrel and the "BNP" proof mark.


Any info is appreciated.
We can’t get very specific, but the BNP (Birmingham Nitro Proof) would indicate that it is chambered in .38 S&W, has or at least had a 5” barrel and a US property stamping on the topstrap, and based on the serial was shipped to Britain under Lend-Lease in spring 1943.

Where is that “large P” located on the barrel? A photo would be helpful.
Reply With Quote
The Following User Likes This Post:
Reply

Tags
380, cartridge, certificate, commercial, gunsmith, k frame, leather, military, model 10, parkerized, postwar, scope, sideplate, sig arms, smith and wesson, smith-wessonforum.com, springfield, stag, swca, trademark, united states property, victory, walnut, wondersight, wwii

Thread Tools
Display Modes

Posting Rules
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Three more for the Victory Data Base Silver King S&W Hand Ejectors: 1896 to 1961 8 05-07-2012 09:06 PM
Three more for the Victory Data Base Silver King S&W Revolvers: 1980 to the Present 3 05-06-2012 04:40 PM
Another Victory for the Data base cquickel S&W Hand Ejectors: 1896 to 1961 1 05-12-2010 06:38 PM
Victory for the data base Barn Boy S&W Hand Ejectors: 1896 to 1961 4 04-10-2010 03:03 PM
New Victory For Data Base delta-419 S&W Hand Ejectors: 1896 to 1961 4 06-10-2008 08:43 AM

Powered by vBadvanced CMPS v3.2.3
smith-wessonforum.com tested by Norton Internet Security smith-wessonforum.com tested by McAfee Internet Security

All times are GMT -4. The time now is 10:42 AM.


Smith-WessonForum.com is not affiliated with Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC)