|
|
|
11-29-2013, 01:26 PM
|
|
Member
|
|
|
Join Date: Jan 2012
Location: KY
Posts: 800
Likes: 1,323
Liked 1,148 Times in 204 Posts
|
|
Happy Happy Happy! Completed my K Frame Masterpiece Trio.
__________________
Mitch
SWCA 2597
|
The Following 105 Users Like Post:
|
-db-, 05CarbonDRZ, 1Aspenhill, 1blindref, 2hawk, 410bore, 625smith, 824tsv, amazingflapjack, AQBill, AR_Black, bellevance, bgrafsr, blackdeuce, bmcgilvray, bmg60, bob1956, brucev, bullmack, CAPops, chief38, chud333, Cloudsmoker, Combat, CptCurl, DCWilson, DGT, ditrina, Dixiejack, Doc44, donadler, Dutchguy, ghawke, glowe, GPJohn, Grayfox, gripper, gruntdeputy, Gun 4 Fun, H Richard, Hondo44, HWayne, IWK2HT, j38, JayCeeNC, JBert27, Jebus35745, jhde69, Jim R, Jimmyjones, jjbrewst1, jrs70, jsfricks, jshrop6004, kb5601, keith44spl, klind45, LEO918, linde, LoadedRound, lowhog, lscocoa, M29since14, markggtp, Memphis, Mike McLellan, Mike Q., Mike1957, model3sw, Modified, mojave30cal, mr.jbk79, MrTrolleyguy, Muley Gil, nuguy, Old Corp, Old TexMex, OldDominion, Orry, Papa John, pawncop, PerryLane, PMRet, r3captain, raljr1, Rigmover, RKmesa, Rudi2, RWJ, S&WIowegan, samandglove1, silver armadillo, sjmjax, Skeptic 9c, snake803, sophie, srsmyth, STCM(SW), Sverre, THREEDFLYER, tlay, Whisper, Widetrack, wraco, xx78 |
11-29-2013, 01:28 PM
|
|
SWCA Member
|
|
|
Join Date: Feb 2011
Location: Ohio
Posts: 5,210
Likes: 6,430
Liked 9,646 Times in 1,800 Posts
|
|
AWESOME Mitch! Usually the K32 is the pride of everyone's K-Target trio but in your case that K190 is hard to beat
__________________
Kris
OGCA, NRA LM
|
The Following 4 Users Like Post:
|
|
11-29-2013, 01:48 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2012
Location: Flathead Valley, Montana
Posts: 2,822
Likes: 2,593
Liked 12,781 Times in 1,815 Posts
|
|
K190 and a K-32?
I'm seriously experiencing an emotion here. Pretty sure it's one that's classified as a sin.
|
The Following 3 Users Like Post:
|
|
11-29-2013, 01:48 PM
|
SWCA Member
|
|
|
Join Date: Jun 2012
Location: Cottage Grove,WI
Posts: 4,124
Likes: 1,540
Liked 5,518 Times in 1,650 Posts
|
|
Congrats Mitch,That is quite the set!
|
The Following User Likes This Post:
|
|
11-29-2013, 02:19 PM
|
|
SWCA Member
|
|
|
Join Date: Aug 2010
Location: Death Valley, AZ
Posts: 2,811
Likes: 14,029
Liked 9,007 Times in 1,403 Posts
|
|
Well done Mitch. I'm happy for ya'.
P.S. My K-32 is SN: K 221793
__________________
Living a dream - S&WCA #2364
Last edited by LEO918; 11-29-2013 at 02:38 PM.
|
The Following User Likes This Post:
|
|
11-29-2013, 02:48 PM
|
Banned
|
|
|
Join Date: Jul 2013
Location: PA
Posts: 2,081
Likes: 3,653
Liked 2,255 Times in 750 Posts
|
|
Congratulations on your trio! Pat yourself on the back. Nice photography job also. And I hear even finding those blue S&W prop-rods is an accomplishment, at lest around here it is. Again, congrats.
|
The Following User Likes This Post:
|
|
11-29-2013, 03:18 PM
|
|
Member
|
|
|
Join Date: Oct 2007
Location: Northern Indiana
Posts: 2,937
Likes: 1,594
Liked 1,977 Times in 732 Posts
|
|
Mitch, those three are beauts. How long have you had the K32? Do you have all the boxes?
__________________
Tom
NRA Pistol Inst
|
The Following User Likes This Post:
|
|
11-29-2013, 03:28 PM
|
|
Member
|
|
|
Join Date: Jan 2012
Location: KY
Posts: 800
Likes: 1,323
Liked 1,148 Times in 204 Posts
|
|
Quote:
Originally Posted by tlay
Mitch, those three are beauts. How long have you had the K32? Do you have all the boxes?
|
Tom,
I have had the K32 a couple weeks, I got it from a member here.
I have the original K22 box with K190 and I have period correct boxes for the K32 and K38.
__________________
Mitch
SWCA 2597
|
The Following 5 Users Like Post:
|
|
11-29-2013, 03:53 PM
|
SWCA Member
|
|
|
Join Date: May 2011
Location: pa
Posts: 3,071
Likes: 4,013
Liked 5,305 Times in 1,444 Posts
|
|
Mitch, I'm glad k190 is still in the fold. Thats a very fine trio anyone would be proud to own.
Are any of these in your shooting rotation?
|
The Following User Likes This Post:
|
|
11-29-2013, 04:07 PM
|
|
Member
|
|
|
Join Date: Jan 2012
Location: KY
Posts: 800
Likes: 1,323
Liked 1,148 Times in 204 Posts
|
|
Quote:
Originally Posted by paplinker
Mitch, I'm glad k190 is still in the fold. Thats a very fine trio anyone would be proud to own.
Are any of these in your shooting rotation?
|
Rich,
I am looking for some 32 S&W long brass to load for the K32, everyone says that they are a dream to shoot. So I want to experience shooting this one. The other 2 probably won't see much range time.
__________________
Mitch
SWCA 2597
|
11-29-2013, 08:44 PM
|
SWCA Member
|
|
|
Join Date: Nov 2008
Location: Michigan
Posts: 6,026
Likes: 1,061
Liked 774 Times in 375 Posts
|
|
Congrats! I just completed mine about 5 or 6 weeks ago. Mine are not all 5 screws though. The K-38 is a 4 screw as is the K-32. The K-22 is a 17-3, but finding a dash one or earlier K-22 is a LOT easier than finding the K-32.
Couple things I notice- your K-22 front sight is a lot shorter as you pointed out already, but mine is the same height as my other K Masterpieces, or at least within a couple thousandths if not exact. I wonder if yours was modified, or if S&W changed that at some point after yours was built? The other thing I notice, in your pics at least, your K-32 barrel looks like it is duller than the rest of the gun. Mine is the same way. I wonder what's the story there?
I looked all over the place for brass, and I was lucky enough to get the last 200 Long cases that Midway had. In fact, they only had 199, so I got shorted 1 in my order which is a PITA if you're like me and want to load in 50 or 100 round batches. They told me they didn't expect any more until Sep of '14. Yikes!! Durn CASS dudes.
Last edited by Gun 4 Fun; 11-29-2013 at 08:49 PM.
|
The Following User Likes This Post:
|
|
11-29-2013, 08:46 PM
|
SWCA Member
|
|
|
Join Date: Jun 2010
Location: Cedar City,Utah
Posts: 2,901
Likes: 5
Liked 3,014 Times in 839 Posts
|
|
Well, if anyone deserves congrats, it is you my friend. Super nice revolvers. I have all these as well, but my K22 was shipped 9-23-1947. You are "D" man my friend. Big Larry
|
The Following User Likes This Post:
|
|
11-29-2013, 08:55 PM
|
SWCA Member
|
|
|
Join Date: Dec 2005
Location: Portland, OR
Posts: 5,524
Likes: 940
Liked 6,468 Times in 1,328 Posts
|
|
The three different sight heights are because of the three different calibers. The
larger the bullet, the more recoil you get, and therefore you have to push the front of
the barrel down further, to accommodate that recoil. That is primarily why the
38 has the highest front sight. With the barrels all the same length, this is what is
necessary.
Mike Priwer
|
The Following 2 Users Like Post:
|
|
11-29-2013, 09:08 PM
|
SWCA Member
|
|
|
Join Date: Nov 2008
Location: Michigan
Posts: 6,026
Likes: 1,061
Liked 774 Times in 375 Posts
|
|
Quote:
Originally Posted by mikepriwer
The three different sight heights are because of the three different calibers. The
larger the bullet, the more recoil you get, and therefore you have to push the front of
the barrel down further, to accommodate that recoil. That is primarily why the
38 has the highest front sight. With the barrels all the same length, this is what is
necessary.
Mike Priwer
|
Mike,
I understand all that. Nothing new to me there. What I was pointing out is that the OP's front sights appear to be a LOT different in height when I compare them to my trio. My K-22 has a .158" front blade height. My K-32 runs .210" and my K-38 runs .220". None of them have ever been altered or replaced. The K-32 and K-38 are almost impossible to see the difference unless you are right here looking at them. My K-22 is visibly different than the other two, but not nearly as much as the OP's. The op's K-22 front sight blade appears to be less than what is on mine by a noticeable degree, and is what caught my eye.
|
The Following User Likes This Post:
|
|
11-29-2013, 09:09 PM
|
SWCA Member
|
|
|
Join Date: Jun 2012
Location: Cottage Grove,WI
Posts: 4,124
Likes: 1,540
Liked 5,518 Times in 1,650 Posts
|
|
Quote:
Originally Posted by Gun 4 Fun
Congrats! I just completed mine about 5 or 6 weeks ago. Mine are not all 5 screws though. The K-38 is a 4 screw as is the K-32. The K-22 is a 17-3, but finding a dash one or earlier K-22 is a LOT easier than finding the K-32.
Couple things I notice- your K-22 front sight is a lot shorter as you pointed out already, but mine is the same height as my other K Masterpieces, or at least within a couple thousandths if not exact. I wonder if yours was modified, or if S&W changed that at some point after yours was built? The other thing I notice, in your pics at least, your K-32 barrel looks like it is duller than the rest of the gun. Mine is the same way. I wonder what's the story there?
I looked all over the place for brass, and I was lucky enough to get the last 200 Long cases that Midway had. In fact, they only had 199, so I got shorted 1 in my order which is a PITA if you're like me and want to load in 50 or 100 round batches. They told me they didn't expect any more until Sep of '14. Yikes!! Durn CASS dudes.
|
Don't feel bad,Midway shorts everyone on brass.I ordered 200pcs of .45LC Brass and ended up with 197.
|
11-29-2013, 09:14 PM
|
SWCA Member
|
|
|
Join Date: Nov 2008
Location: Michigan
Posts: 6,026
Likes: 1,061
Liked 774 Times in 375 Posts
|
|
Quote:
Originally Posted by 05CarbonDRZ
Don't feel bad,Midway shorts everyone on brass.I ordered 200pcs of .45LC Brass and ended up with 197.
|
That's too bad to hear. I haven't had to buy any brass in a LONG time, especially from Midway. I had a really good supply on hand for almost every single caliber I load for (which is 26 IIRC) when all this latest BS started. I always used to receive one to two extra pieces from them in my orders. Times, they are a changin' eh?
|
11-29-2013, 09:59 PM
|
|
Member
|
|
|
Join Date: Jun 2004
Location: Independence, OH, USA
Posts: 6,950
Likes: 28,978
Liked 7,242 Times in 2,604 Posts
|
|
WOW, what a nice set of calibers and hard ones to find also. If you can't find brass in the near future let me know. I'll send you some to get you started, Larry
|
The Following User Likes This Post:
|
|
11-29-2013, 10:18 PM
|
SWCA Member
|
|
|
Join Date: Jul 2005
Location: Indiana
Posts: 11,953
Likes: 10,136
Liked 10,126 Times in 4,798 Posts
|
|
Well those are very nice. Thanks for showing us.
|
The Following User Likes This Post:
|
|
11-29-2013, 11:02 PM
|
|
Member
|
|
|
Join Date: Jan 2012
Location: KY
Posts: 800
Likes: 1,323
Liked 1,148 Times in 204 Posts
|
|
Quote:
Originally Posted by Gun 4 Fun
Congrats! I just completed mine about 5 or 6 weeks ago. Mine are not all 5 screws though. The K-38 is a 4 screw as is the K-32. The K-22 is a 17-3, but finding a dash one or earlier K-22 is a LOT easier than finding the K-32.
Couple things I notice- your K-22 front sight is a lot shorter as you pointed out already, but mine is the same height as my other K Masterpieces, or at least within a couple thousandths if not exact. I wonder if yours was modified, or if S&W changed that at some point after yours was built? The other thing I notice, in your pics at least, your K-32 barrel looks like it is duller than the rest of the gun. Mine is the same way. I wonder what's the story there?
I looked all over the place for brass, and I was lucky enough to get the last 200 Long cases that Midway had. In fact, they only had 199, so I got shorted 1 in my order which is a PITA if you're like me and want to load in 50 or 100 round batches. They told me they didn't expect any more until Sep of '14. Yikes!! Durn CASS dudes.
|
"but finding a dash one or earlier K-22 is a LOT easier than finding the K-32."
Try finding a 3 digit serial numbered K22 that starts with a 1.
As far as the barrel on the K32 it must be the lighting for the satin finish is consistent over all when it is in hand.
As for the sight on K190, it is original. I am assuming that sometime between the Pre Model 17's and your 17-3 they went to a taller front sight for here is a couple more early K22 with the same front sight.
This one is K13XX. Shipped March 1947.
Here is K28XX, shipped August 1947.
Regards
__________________
Mitch
SWCA 2597
|
The Following User Likes This Post:
|
|
11-29-2013, 11:02 PM
|
|
Member
|
|
|
Join Date: May 2009
Location: South Florida
Posts: 7,783
Likes: 2,487
Liked 8,320 Times in 2,920 Posts
|
|
Nice trio but the collection is now "Compete" ? somehow Im guessing it will keep growing !
Quote:
Originally Posted by Gun 4 Fun
Mike,
I understand all that. Nothing new to me there. What I was pointing out is that the OP's front sights appear to be a LOT different in height when I compare them to my trio. My K-22 has a .158" front blade height. My K-32 runs .210" and my K-38 runs .220". None of them have ever been altered or replaced. The K-32 and K-38 are almost impossible to see the difference unless you are right here looking at them. My K-22 is visibly different than the other two, but not nearly as much as the OP's. The op's K-22 front sight blade appears to be less than what is on mine by a noticeable degree, and is what caught my eye.
|
The SCSW mentions 1/10" or 1/8" Patridge FS with the 1/10" deleted in 1952 (always assumed that was blade thickness) but all of my 6" K-22's up to 1951 have a visibly shorter FS blade (they also have a narrower rear blade notch).
May have something to do with the change in how the earlier K22 ramp appears to be pinned to the top of the rib where after 1950 seems they milled a bit of the rib so the ramp blade is lower and a flush mount.
|
The Following 2 Users Like Post:
|
|
11-29-2013, 11:40 PM
|
SWCA Member
|
|
|
Join Date: Feb 2006
Location: Pikeville, Tennessee
Posts: 6,067
Likes: 923
Liked 9,963 Times in 3,661 Posts
|
|
Quote:
Originally Posted by mikepriwer
The three different sight heights are because of the three different calibers. The
larger the bullet, the more recoil you get, and therefore you have to push the front of
the barrel down further, to accommodate that recoil. That is primarily why the
38 has the highest front sight. With the barrels all the same length, this is what is
necessary.
Mike Priwer
|
So what you're saying is the force which moves the mass of the bullet down the barrel in some (pretty small) amount of time also moves the mass of the gun (in recoil) in even less time------thereby causing an effect on the path of the bullet. That's an interesting concept----all the more so when you consider the average weight of one of these guns is somewhere around 14,000 grains---and the average weight of the bullet is some less. I guess I'll have to ponder that some----for awhile.
Ralph Tremaine
|
The Following User Likes This Post:
|
|
11-29-2013, 11:45 PM
|
|
Member
|
|
|
Join Date: Sep 2010
Location: Western Washington
Posts: 763
Likes: 1,156
Liked 1,125 Times in 370 Posts
|
|
Mitch
I lost your address from when I got those 2 revolvers from you. PM me with it and I will send you some brass. I don't have a lot but as the wife shoots up those 32 shells she has I will send you the brass.
Jim R
__________________
NRA Range Safety Officer
|
The Following 2 Users Like Post:
|
|
11-30-2013, 01:05 AM
|
Absent Comrade
|
|
|
Join Date: Jan 2009
Posts: 2,998
Likes: 845
Liked 898 Times in 488 Posts
|
|
great looking trio. are you starting on the combat versions of these now?
|
The Following User Likes This Post:
|
|
11-30-2013, 04:16 AM
|
SWCA Member
|
|
|
Join Date: Nov 2008
Location: Michigan
Posts: 6,026
Likes: 1,061
Liked 774 Times in 375 Posts
|
|
Quote:
Originally Posted by rct269
So what you're saying is the force which moves the mass of the bullet down the barrel in some (pretty small) amount of time also moves the mass of the gun (in recoil) in even less time------thereby causing an effect on the path of the bullet. That's an interesting concept----all the more so when you consider the average weight of one of these guns is somewhere around 14,000 grains---and the average weight of the bullet is some less. I guess I'll have to ponder that some----for awhile.
Ralph Tremaine
|
Mike is absolutely right about that. The moment a gun is fired it starts to move in recoil just as quickly as the bullet starts down the bore. The heavier and slower the bullet is, the longer it is in the bore for the recoil forces to work on. That is not a new theory, and in fact, not theory at all. It is a simple fact of physics.
It is why in a (handgun especially), when you fire faster, lighter bullets than what the main/general/most common bullet weight used for a particular caliber, and what the sights are generally set to work best with, you have to crank the rear sight up to bring POI up, and why it is just the opposite when firing heavier than normal/standard bullets from the same gun (or more lightly loaded ammo using bullets of the common weight used in that cartridge), that you have to crank it down, usually as much as possible, and even then it is sometimes not enough depending on the front and rear sight blade heights. The model 25-5's are famous for having too short a front sight blade on them.
|
The Following User Likes This Post:
|
|
11-30-2013, 04:37 AM
|
Member
|
|
|
Join Date: Apr 2009
Location: NC
Posts: 1,974
Likes: 395
Liked 828 Times in 274 Posts
|
|
Congratulations on a great looking group. Sounds like you've never fired a K-32, so you're in for a real treat. To me, hands down the sweetest shooting target revolver on the planet!
|
The Following User Likes This Post:
|
|
11-30-2013, 08:55 AM
|
|
Member
|
|
|
Join Date: Aug 2012
Location: Virginia
Posts: 835
Likes: 470
Liked 1,348 Times in 268 Posts
|
|
Well done Mitch! I always heard that twins are fun, but triplets are even better....My search for the elusive K32 has been fruitless so far. I know one is out there for me, just have to be patient. Your photog skills are also first rate. I really should build a light box so I wouldn't have to depend on the weather being nice to shoot photos. Lee
__________________
NRA Cert. Inst. RSO
|
The Following User Likes This Post:
|
|
11-30-2013, 12:30 PM
|
Member
|
|
|
Join Date: Feb 2012
Location: Pennsylvania
Posts: 197
Likes: 274
Liked 63 Times in 46 Posts
|
|
Nice job, Mitch. Beauties, all. Now I have to wonder if you ever got that other grail gun you talked about ?? Still haven't shot my 1950 .38 Masterpiece.. I actually bought a newer one to shoot !! You know how it is..... Mike
|
The Following User Likes This Post:
|
|
11-30-2013, 12:43 PM
|
Member
|
|
|
Join Date: Jan 2013
Posts: 2,668
Likes: 3,512
Liked 1,578 Times in 912 Posts
|
|
I haven't even seen a K-32 in the wild.
Nice trio.
__________________
What would Jim Cirillo do?
|
The Following User Likes This Post:
|
|
11-30-2013, 01:32 PM
|
SWCA Member
|
|
|
Join Date: Feb 2006
Location: Pikeville, Tennessee
Posts: 6,067
Likes: 923
Liked 9,963 Times in 3,661 Posts
|
|
Quote:
Originally Posted by Gun 4 Fun
Mike is absolutely right about that. The moment a gun is fired it starts to move in recoil just as quickly as the bullet starts down the bore. The heavier and slower the bullet is, the longer it is in the bore for the recoil forces to work on. That is not a new theory, and in fact, not theory at all. It is a simple fact of physics.
It is why in a (handgun especially), when you fire faster, lighter bullets than what the main/general/most common bullet weight used for a particular caliber, and what the sights are generally set to work best with, you have to crank the rear sight up to bring POI up, and why it is just the opposite when firing heavier than normal/standard bullets from the same gun (or more lightly loaded ammo using bullets of the common weight used in that cartridge), that you have to crank it down, usually as much as possible, and even then it is sometimes not enough depending on the front and rear sight blade heights. The model 25-5's are famous for having too short a front sight blade on them.
|
So the trajectory of the faster, lighter bullets has nothing to do with it then----and apparently the trajectory of the 22/32/38's also have nothing to do with the sight height----right? And the gun starts to move at the same time the bullet does? Boy, have I got it all wrong!!
Speaking of a simple fact of physics, where does the acceleration of the two different masses (bullet/gun) by the same force come into play?
Thanks for your help!
Ralph Tremaine
|
The Following User Likes This Post:
|
|
11-30-2013, 02:27 PM
|
SWCA Member
|
|
|
Join Date: Nov 2008
Location: Michigan
Posts: 6,026
Likes: 1,061
Liked 774 Times in 375 Posts
|
|
Quote:
Originally Posted by rct269
So the trajectory of the faster, lighter bullets has nothing to do with it then----and apparently the trajectory of the 22/32/38's also have nothing to do with the sight height----right? And the gun starts to move at the same time the bullet does? Boy, have I got it all wrong!!
Speaking of a simple fact of physics, where does the acceleration of the two different masses (bullet/gun) by the same force come into play?
Thanks for your help!
Ralph Tremaine
|
Ralph,
I'm no physics expert, but there was an extremely detailed thread on TFL a couple years back about this subject.
There is no "trajectory" in reality (at least in the sense in which you seem to be considering it) for any round made. They all start to drop the moment they leave the muzzle. Any trajectory is based totally off of the sight settings. As long as your sights get POI on target, a bullet that has less dwell time in the bore will hit lower on the target than will one that is in the bore longer.
You can test that easily with an gun, but especially one with plenty of recoil.
Example:
I can load 425 grain cast bullets to 800 fps in my 475 Linebaugh, and then again at 1400 FPS. With the lighter load I have to crank the rear sight all the way down, and I'm still too high because the sights are designed to work with the round running at its normal speed. If I crank up the velocity to where it was designed, the rear sight is in the mid/to upper area of its range to get the hits to POA. It is the same with any bullet weight loaded up or down, and in any caliber I load for.
Sorry about the thread hijack Mitch. I won't go any further with this in this thread.
Last edited by Gun 4 Fun; 11-30-2013 at 03:24 PM.
|
The Following User Likes This Post:
|
|
11-30-2013, 02:37 PM
|
|
SWCA Member
|
|
|
Join Date: Jul 2009
Location: Puget Sound, Washington
Posts: 1,079
Likes: 182
Liked 1,201 Times in 353 Posts
|
|
Hey Mitch,
Very nice - perseverance does pay. You are two Holy Grails ahead of me - I still need the K-32 and the K-22/40!
__________________
Dennis
SWCA #2409, SWHF #353
|
The Following User Likes This Post:
|
|
11-30-2013, 02:57 PM
|
|
Member
|
|
|
Join Date: Nov 2006
Location: Alberta,Canada
Posts: 603
Likes: 114
Liked 150 Times in 55 Posts
|
|
Mitch Congrats on your trio.
Very nice Family of Masterpieces.
I too have a trio
Pre-K32 First Model from 1937
Pre-K22 from 1951
14-2 from 1965
Gotta love them K Frames everyone needs at least one of each in there collection.
Enjoy!!
Rick
|
The Following User Likes This Post:
|
|
11-30-2013, 07:02 PM
|
|
SWCA Member
|
|
|
Join Date: Oct 2006
Location: AZ
Posts: 7,420
Likes: 27,915
Liked 45,746 Times in 4,818 Posts
|
|
Mitch:
Congrats on completing the trio! Very nice. I, on the other hand have several K-38's , a bunch of K-22's , One K-32 box, but sadly - NO K-32 to fill the box . If anyone wants to help me out with a nice K-32 I'd be more than happy to make it worth your while...
Once again - very nice!
__________________
Richard
Engraved S&W fan
|
The Following User Likes This Post:
|
|
11-30-2013, 07:16 PM
|
|
Member
|
|
|
Join Date: Dec 2011
Location: Indiana
Posts: 7,896
Likes: 31,497
Liked 22,512 Times in 4,626 Posts
|
|
Congrats my friend. Throw in your 2nd model K22-40
and you have the Superfecta !!!
Chuck
__________________
They hold no Quarter
|
The Following User Likes This Post:
|
|
11-30-2013, 11:39 PM
|
Member
|
|
|
Join Date: Jan 2012
Location: Nebraska
Posts: 1,568
Likes: 2,032
Liked 1,264 Times in 409 Posts
|
|
Congratulations, Mitch!
|
The Following User Likes This Post:
|
|
12-01-2013, 09:24 AM
|
Member
|
|
|
Join Date: Jul 2010
Location: Central VA
Posts: 8,659
Likes: 1,570
Liked 9,428 Times in 4,226 Posts
|
|
Quote:
Originally Posted by COYOTEHUNTER
Rich,
I am looking for some 32 S&W long brass to load for the K32, everyone says that they are a dream to shoot. So I want to experience shooting this one. The other 2 probably won't see much range time.
|
First, congrats on hitting the trifecta! You realize that it's kinda weird to get the K-32 as any but the final lucky acuisition, don't you? As for shooting the 32 S&W, it seems that ammo and brass for it go through cycles of flood or drought. I just swapped for a couple of hundred rounds of once-fired brass, bringing my total up to about 750 or so... enough that I'm no longer scrambling to find it. Gun shows and surprisingly, flea markets (around here) sometimes prove fruitful.
Have you picked up a set of loading dies and a bullet mould yet? I think Lyman has discontinued their version (I made up a set one die at a time) but the RCBS set did quite well for me and a Lee set I used to have worked well also.
As for bullets, I really like semi-wadcutters of about 95-100 grains for general use and 95 grain wadcutters for pure target (either swaged HBWC or cast solids.) Bullseye™ has been my "go to" powder.
I hope you will enjoy both ownership and shooting your "Big 3."
Regards,
Froggie
|
The Following User Likes This Post:
|
|
12-01-2013, 11:25 AM
|
Banned
|
|
|
Join Date: Apr 2013
Posts: 12,572
Likes: 21,054
Liked 32,463 Times in 7,773 Posts
|
|
Those three words on the side of the K38 say it all: MADE IN U.S.A.
|
The Following User Likes This Post:
|
|
12-02-2013, 08:49 AM
|
|
Absent Comrade
|
|
|
Join Date: Sep 2003
Location: Knoxville, Tennessee
Posts: 1,563
Likes: 20
Liked 1,331 Times in 325 Posts
|
|
Hello Mitch
Congratulation's on completing the S&W Masterpiece trio ! I did as well a few year's ago and believe it or not the hardest one to find for me was a Decent K-38. I got my Transitional K-22 One line address K-22 about Ten year's ago, but mine is a lot higher in Serial Number than Your's they are Tough to find in Transitional form with the larger Extractor end's on them, and Proof that S&W did Not waste useable parts. I Guess Machining cost was moderate back then as the Transitional K-22 had to have it's barrel Milled out to allow the mushroom shaped extractor end to lock up the action. The Masterpiece series is the finest Target revolver creation to come out of S&W for sure. here is my Trio for your viewing pleasure.
On the subject of Sight Height being to do with Caliber or a Gun's recoil, I Humbly disagree. I have heard that the sight height was derived by the barrel length not caliber or Recoil. Proof of that would be in my modified S&W Model 16-4 of which I had Modified to fire the Much Hotter Federal .327 Magnum cartridge. The gun left the factory chambered in the Anemic .32 H&R Cartridge but now is modified to fire the Hotter Federal .327 magnum. I did not change out the sight blade front or rear and I have Plenty of room for adjustment. The average velocity of the H&R .32 Magnum is around 1000 FPS. The average velocity of the Federal .327 Magnum is around 1500 FPS. I do Notice if I fire Lighter Bullet's in my hand load's that their Point of Impact is lower than that of the heavier weight bullet's, but it can be corrected by adjustment. Recoil between the two rounds is very different as the Federal .327 Magnum is a Lot more in felt Recoil than that of the .32 H&R Magnum...
|
The Following 6 Users Like Post:
|
|
12-05-2013, 05:53 PM
|
|
Member
|
|
|
Join Date: Oct 2013
Location: Southern New England, USA
Posts: 6
Likes: 2
Liked 1 Time in 1 Post
|
|
Only if you don't have a MOD 66 in your free hand and at least one foot on the floor.
Hey, I'm just say'n.
That's certainly a sweet trio, though.
I'm getting a bit light-headed just looking at them.
__________________
"Oooh, where'd that one go??"
|
The Following User Likes This Post:
|
|
12-05-2013, 06:30 PM
|
Member
|
|
|
Join Date: Feb 2013
Location: Southern Utah, St George,
Posts: 23
Likes: 4
Liked 7 Times in 5 Posts
|
|
Quote:
Originally Posted by 410bore
AWESOME Mitch! Usually the K32 is the pride of everyone's K-Target trio but in your case that K190 is hard to beat
|
Have a postwar K22 NIB purchased in the early 1970's. That is the reigning royalty of all my S&W handguns. Great pictures and it saves me having to go dig mine out to look at it.
|
The Following User Likes This Post:
|
|
12-05-2013, 06:48 PM
|
|
Member
|
|
|
Join Date: Mar 2012
Location: Fairbanks, Alaska
Posts: 2,992
Likes: 1,026
Liked 2,937 Times in 1,078 Posts
|
|
It's been over a week since you posted your good fortune, and my jealosy has subsided enough to offer my congatulations. Well done. That is a fine looking bunch of six-shooters.
__________________
Why, I aughta.....
|
The Following User Likes This Post:
|
|
12-05-2013, 07:58 PM
|
Member
|
|
|
Join Date: Feb 2012
Location: Birmingham, AL
Posts: 22
Likes: 14
Liked 11 Times in 8 Posts
|
|
That is a fine trio, sir. I've had my eye out for a K32 or years. Congratulations.
|
The Following User Likes This Post:
|
|
12-05-2013, 10:52 PM
|
|
US Veteran Absent Comrade
|
|
|
Join Date: May 2011
Location: HighDesertofCentralOregon
Posts: 12
Likes: 10
Liked 2 Times in 2 Posts
|
|
What a great set! Makes my collection of one K-22 look kind of lame. No plans to correct that. Received it as a gift when I graduated from the 8th grade! That would not fly with todays PC crowd!
|
The Following User Likes This Post:
|
|
12-05-2013, 11:22 PM
|
|
Member
|
|
|
Join Date: Oct 2013
Location: VA
Posts: 1,644
Likes: 1,638
Liked 1,889 Times in 527 Posts
|
|
Hi everyone, I grew up with firearms, fired a handgun my entire career but never collected. Seeing Mitch's trio of K22; K32; and K38 and all the comments have realy inspired me to do a lot more reading and possibly collecting. I see a lot of forum members discuss other groups of handguns for collecting which gives me many ideas, mostly dreams. Thanks for all your input. Jack
|
The Following User Likes This Post:
|
|
12-06-2013, 12:39 AM
|
Member
|
|
|
Join Date: Jun 2005
Location: missouri
Posts: 262
Likes: 19
Liked 18 Times in 15 Posts
|
|
Wonderful collection! Congratulations and I know it was a lot of work.
|
The Following User Likes This Post:
|
|
12-06-2013, 12:53 AM
|
|
SWCA Member
|
|
|
Join Date: Apr 2005
Location: SE USA
Posts: 2,470
Likes: 4,481
Liked 1,926 Times in 872 Posts
|
|
Are the sights and the sight bases all different per caliber? Looks as though they are. I always thought trajectory had a little to do with it, too. Live and learn.
Also, that is a threesome to be proud to have. Nice guns.
|
12-06-2013, 04:07 PM
|
|
Member
|
|
|
Join Date: Sep 2013
Location: Illinois
Posts: 13
Likes: 6
Liked 9 Times in 6 Posts
|
|
Beautiful guns! I bought my K-22 about 35 years ago, it was, and is, a great shooting gun. Shortly after, I bought a K-38 in 8 3/8"; being young and dumb I traded it off for something I don't remember and probably don't have anymore. I finally found a nice Pre K-38 8 or 9 years ago. I'd love to find a nice K-32, just don't know if I could afford it :- ).
|
03-17-2015, 06:02 PM
|
|
SWCA Member
|
|
|
Join Date: Dec 2007
Location: Orange County, CA
Posts: 13,996
Likes: 5,005
Liked 7,702 Times in 2,624 Posts
|
|
I just rediscovered this thread and realized that although I hit the first post with a well-deserved "Like," I never added the larger comments that it deserves. Congratulations on putting together one of the more difficult combos in S&W collecting: The postwar masterpiece trio is a hard group to assemble, and I respect anyone who manages to pull it off.
Once the basic goal is met, of course, the collector's goal becomes a series of retreating and ever more difficult targets: the narrow-rib trio, the wide-rib trio; the NMM trio, the model-marked trio; the one-line trio, the four-line trio; the no-knob trio, the LERK trio; and so on, but that exhausts the major options. At least these different categories overlap a little, so a member of the trio club could sometimes use one specimen to fulfill the distinction of different classes.
Should someone start an Official Masterpiece Trio thread? I bet it would be one of the shortest "Official" threads this forum has ever seen.
Really, congratulations. It takes extreme patience or a lot of luck (and sometimes a pretty deep pocket) to assemble a Masterpiece Trio. Well done!
__________________
David Wilson
|
The Following User Likes This Post:
|
|
03-17-2015, 06:10 PM
|
|
Member
|
|
|
Join Date: Oct 2013
Location: VA
Posts: 1,644
Likes: 1,638
Liked 1,889 Times in 527 Posts
|
|
What Mitch did is amazing - I tried but only came up with the 14-2;
16-2; & 17-2. Then it was the 15-2 and 18-2. It never ends.
__________________
Baby Chief Admirer
SWCA 2870
|
03-17-2015, 07:04 PM
|
Member
|
|
|
Join Date: Jan 2003
Location: Eads, Tn, Unites State
Posts: 1,236
Likes: 2,866
Liked 879 Times in 280 Posts
|
|
I've really enjoyed this thread. I was hoping there would be a surfacing of a early K-38 LERK. I don't know how many of those rascals exist but I'd love to have one. If my memory serves me right I believe the esteemed gentleman from california does have one. I'd also like to have a pre-16...but I digress. Great thread and great pics!
Thanks, Roger
__________________
Eph 2:8-9
|
|
|
Posting Rules
|
|
|
|
|